sui used for sale

The laser device series NBL, consistently adaptable to your needs, allows you this economic and durable engraving of single pieces and small series, directly from the computer. Ideally suited for medical instruments, devices and transplants. No consumables. In a special process you can even mark glass - instant - durable. So, you can mark on your products easy and flexible variable data, for example a 2D barcode, or QR code in the highest quality. Also plastics are possible, like E.g. an attractive customer card, with photo or graphics, in brilliant quality. Laser marking is resistant to abrasion, penetrates deep into the material and thereby effectively resists tampering attempts and adverse effects due to environmental influences, to a large extent. Only a standard PC (not included) is required for the Operation where the software supplied is running to operate the laser.  ...

1 high quality, factory-tested, well preserved double girder crane especially suitable for the Coilumschlag Load approx. 80,000/32,000 kg Wingspan approx. 25,600 mm Hook way approx. 8,500/13,500 mm Make SIEMAG/SIEMENS Overhaul and rebuild/workshop test 2009/2016 Trolley in robust wind plant design, between the crane bridge catwalk one-sided lowered to optimize the installation height, cabin control (expandable easily on radio), operating speeds: Main hoist 80 t to approx. 4.25 m / min auxiliary hoist 32 t up to approx. 10.8 m / min Katz LG 32/80 t Max approx. 40.0/20,0 m / min Crane chassis 32/80 t Max 80.0/40.0 m / min

System: Used tank, storage tank Manufacturer: Dalton Material: Plastic Capacity: 2000 l Dimensions: Lxwxh 2.00 x 0.70 x 1.40m Other: operating pressure, not suitable for fuel oil Tanks: There are two identical tanks are available.

Automatic powder filling- and closing machine, suitable for micro volume. Speed: up to 60 units/min.

THROW BAND / SPIN / BELT / DIRECT FROM THE MANUFACTURER! -Stable original cast band / belt / conveyor belt made of rubber, specially designed for baling presses (original quality) or many other applications in industry, agriculture, wood u.v.m.! -New, open reinforced, with mounted hook connectors in stainless steel, 2-ply top Supergrip profile, black, running side out fabric -suitable for CLAAS, Stockey & Schmitz and Welger P22/P23 -Name: EP 3-0 250/2, ceiling -Dimensions: length 2,040 mm x width 300 mm Shipping will be by UPS! On request, we can customize the conveyors / conveyor belts to your individual measurements. (All lengths and widths possible) Endless connection on request. Additional versions, with pimples, Stollen or structured surfaces available. More transport and conveyor belts in all other sizes available immediately . We ship worldwide we deliver worldwide, pl ...

Inline powderdissolver Suitable for cold blending/dissolving powders such as sugar, milkpowder, starch, etc in liquids such as milk, water, etc. Capacity up to 100 kg powder per min, depending on product property's. Power consumption 7.5kW Equipped with overhauled centrifugal pump. ( Frsistam, Alfa Laval, or equivalent) Newlike condition.

NERI DL400 self-adhesive labeller for bottles etc., with two labelling heads, suitable for bottles from 80 to 180mm diameter/width and from 30 to 120mm high. Output up to 100 containers per minute, all stainless steel construction.

PicoPac VM405 shell seal device for Assietten menu trays incl. heat tunnel NHG801 Sealers with two-hand control Operating the device without guard sewn-on prevents safety device on the protective cover of the press Allows remove fast and tool-less quick change facility of the pressing frame of all parts to clean the device E.g. Heating tunnel is equipped with propane gas burner (supplied with pressure reducer, but without gas cylinder) Burner has a pilot flame burner with brief interruptions to, turn back completely, and then again turn on without again having to light Adjustable chain belt speed Heating tunnel is height-adjustable and suitable for the connection to other devices Both devices must be cleaned thoroughly before operating, because dirty

Well-preserved horizontal pillow-pack packaging machine. Very well suited for cylindrical or other elongated products. Was used to extract a sausage in foil. Please see the video. Fully functional, there is some evidence of second-hand. Price on request machine is immediately available.

Full stainless steel heat exchanger in round shape. Previous use: heating air with steam. Suitable for heating or cooling aggressive gases/air.

The MATEC HMS-350 Kleinshredder for professionals, with hammer mill is suitable for crushing of green waste, etc. All types of green waste such as bouquets, garden waste, potted plants, compost in each State, agricultural waste, Earth, cemetery waste, large wood chips and small wood waste, etc. can thus be crushed. The hammer mill is equipped with impact tools made of HARDOX, the appropriate anvil blow bar and the following "data" also made of HARDOX. The content of flower pots, flower boxes, "baked together" grass cutting, etc. can thus be crushed. The combination of anvil blow bar before calibration and subsequent anvil calculation for fine crushing results a high throughput capacity with a small expenditure of energy. Electric motor 7.5 kW, a diesel engine can 3x400V, 50 Hz, power outlet connection euro 32 A request be built up 350 mm diameter insertion slot flight circle diame ...

23.6 m³ / 23600 litres steel tank coated inside. Munkadur coating, 2-component coating, 2-component Top state coated incl. good reasonably priced - used steel tank from the inside: new coat of paint and new dome cover gasket. Dimensions: Ø x 2.45 m approx. 5.50 m long The tank is with a high-quality food-approved Lined interior fully coated (Munkadur). Steel tank / container can be used as a storage tank for water, Liquid feed, whey, molasses, liquid manure, AHL, ASL, seeping juice, Rapeseed oil, edible oil, rain collection tank, etc. are used. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us ...

Inline powderdissolver, suitable for cold blending/dissolving powders such as sugar, milkpowder, starch, etc in liquids such as milk, water, etc.capacity up to 150 kg powder per min, depending on product property's. Power consumption 11 kW Equipped with overhauled centrifugal pump. ( Frsistam, Alfa Laval, or equivalent) Newlike condition.

Built 1988. Pneumatic flat slide valve, in solid design, with rectangular flange mounting. Suitable for temperatures up to 120°C. In mint condition.

GranitoGrav photo-gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, commemorative plaques, tiles, glass, mirror glass ... Load colour photos or photos in black and white into the CAD-CAM ConstruCAM 3D software via the specially developed module. You can then enter the output of the desired size and have milling paths calculated. This created file is opened in the machine's control software and therefore sent to the machine. - More is not necessary! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical and short time and thus creates first-class photos in all the above-mentioned materials with the CNC machin ...

GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. The CNC milling machine series High-Z/S-400T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! The CAM software works off your data accurately and in a very short time and created excell ...

manual casemaker CMC LPA (machine like CMC Q-cover 1) format: max 50x70cm; min. 12x15 cm Machine comprising of: - Gluer suitable for use of warm and coldglue (PVA) - Vacuumtable with spotting guides for 1-3 boards - Edge turning in device (1 side) - Niproller press - Delivery table machine is reconditioned in 2016 Available: immediately/sofort

used approx. 30 m³ / 30000 litres steel tank interior coated double-walled above - ground - 2 steel base - good condition Dimensions: approx. Ø 2.00 m x about 10,00 m of the tank is coated from inside, double-walled and Get up 2 steel bases. Steel tank / container can be used as storage tank for water, manure, AHL, ASL, seeping juice, canola oil, edible oil, rain collection tank, and so on. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site: profi-tanks(dot)de

folder creaser gluing machine double crease head, 1 head to use for perforation as option 3 folding pockets + gate fold glue system Format 50x100cm up to 480 grams machine very well suited for covers with flaps, heavy stock gate fold brochures etc optional pocket folding possible MHGraphics is Fidia dealer. we can organise installation and instruction by trained mechanic Available: immediately/sofort

GranitoGrav photo-gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, commemorative plaques, tiles, glass, mirror glass ... Load colour photos or photos in black and white into the CAD-CAM ConstruCAM 3D software via the specially developed module. You can then enter the output of the desired size and have milling paths calculated. This created file is opened in the machine's control software and therefore sent to the machine. - More is not necessary! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical and short time and thus creates first-class photos in all the above-mentioned materials with the CNC machin ...

GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. The CNC milling machine series High-Z/S-400T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! The CAM software works off your data accurately and in a very short time and created excell ...

GranitoGrav photo-gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, commemorative plaques, tiles, glass, mirror glass ... Load colour photos or photos in black and white into the CAD-CAM ConstruCAM 3D software via the specially developed module. You can then enter the output of the desired size and have milling paths calculated. This created file is opened in the machine's control software and therefore sent to the machine. - More is not necessary! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical and short time and thus creates first-class photos in all the above-mentioned materials with the CNC machin ...

Board thickness up to 5 mm, milling width: 3/4/5/6 mm is given by milling cutter. Suitable for card-, micro- and corrugated board. Cutting depth from 0 up to 1 mm adjust by excenter. Deep processing adjust by knurled skrew. Due to separate adjusting of milling depth and deep processing, is it possible to mill the varnish-, cellophane-, aluminium- and PE-coating in a 1/100 mm range. Suitable for any folder gluer.

GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. The CNC milling machine series High-Z/400-T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! The CAM software works off your data accurately and in a very short time and created excelle ...

GranitoGrav photo-gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, commemorative plaques, tiles, glass, mirror glass ... Load colour photos or photos in black and white into the CAD-CAM ConstruCAM 3D software via the specially developed module. You can then enter the output of the desired size and have milling paths calculated. This created file is opened in the machine's control software and therefore sent to the machine. - More is not necessary! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical and short time and thus creates first-class photos in all the above-mentioned materials with the CNC machin ...

GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. The CNC milling machine series High-Z/S-400T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! The CAM software works off your data accurately and in a very short time and created excell ...

The WS 316 SR is the ideal sampler for eliminating any risk of crosscontamination, as the entire system can be rinsed after the taking of each sample. It is also well suited to the sampling of very dirty or greasy sample media, as warm water rinsing is also available if desired

For the semi-automatic filling and dosing of Pasty products. Suitable for products such as E.g. oils, cosmetics etc. in cups, bottles, canisters, cans or similar containers. The container to be filled will be placed under the filling head, the product is sucked through a tube from the filler and discharged volumetric. Vollpneumatische version without electronics. The fill pulse is triggered via a pneumatic foot switch. Replacing the foot switch with pneumatic components such as a photocell or an external pulse, this filler can be integrated in existing systems. Capacity: 600-1.800 filling strokes per hour (depending on e.g. by product volume, filling speed, operating personnel, etc.) Number of filling stations: 1 Volume ranges depending on the model type: Type: fill: D-P1-60 10 - 60 ml D P1-250 25-250 ml D-P1-500 100-500 ml D-P1-1000 100 - 1000 ml D-P1-2500 250 -  ...

very well maintained APV tubular UHT plant. Suitable for the sterilization of highly viscous product with high dry matter, such as sauces and concentrates. Capacity in currently setup variable up to ± 3000l / hr. ( capacity up to 6000 lt/hr for low viscous products is possible with bigger homogeniser) Equipped with 2 ALFA LAVAL SHL20 Homogenizers, one in aseptic execution and with ball valves. Supplied with complete documentation and many spare parts. Yom. 1993, excellent condition.

GranitoGrav Photo-Gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, plaques, tiles, glass, mirror edible glass ... Just download your black and white or color photo as a template into the special module of the CAD-CAM software ConstruCAM-3D, then enter the output of the wuenengeed size and can then calculate the fraeswege. This file is then opened in the machine software and sent to the machine accordingly, ready ! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical timeandand creates your data with the CNC machine and the GranitoGrav photo module Grinding pins cost about 3- 4 euros per piece and hold ...

Clamping tongs recording with forcing nut. Clamping pliers holder for cylindrical grinding machines. suitable for all grinders with a workpiece spindle mount Mt 5 MK 5 / B32

appr. 40 m³ / 40,000 litres palm oil tank, steel tank, insulated, double-walled, heating coil on the inside, above ground storage container, on 2 bases manufacturer: Dehoust year of manufacture: 2007 volume: 40 m³ / 40,000 L DIN: 6616 D /6601 serial number: 17 / 07 322 leak indicator: control fluid control fluid volume: 320L diameter: ø2500 tested over-pressure: 2 bar tested over-pressure for the double wall: 0,6 bar insulation: mineral wool appr. 10-18 cm, coated with aluminium plates material: inner wall S235JR, outer wall S235JR suitable for fluids harmful to water and for both combustible and non-combustible fluids inner heating coil The container is in used condition, according to the age there are traces of use. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is ...

GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. The CNC milling machine series High-Z/S-400T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! The CAM software works off your data accurately and in a very short time and created excell ...

Cartoning machine MINGOZZI, type: 1010 incl. hot glue system UES filling of bulk in cartons with volumetric dosing system. -Infinitely variable format without tools - so small product batches also suitable - hot glue device manufacturer UES (2009) used for carton sizes: - width: 119-193 mm - depth: 40-88 mm - height: 198-295 mm Power supply 380 V, 50 Hz, 25.5 A Measures 30 PCs. / min. Glue pump 1.2 bar Pumps 1.85 kW

GranitoGrav photo-gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, commemorative plaques, tiles, glass, mirror glass ... Load colour photos or photos in black and white into the CAD-CAM ConstruCAM 3D software via the specially developed module. You can then enter the desired size to be output and have milling paths calculated. This created file is therefore opened in the KinetiC-NC control software of the machine and is therefore sent to the machine. - More is not necessary! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical and short time and thus creates first-class photos in all the above-mentioned m ...

GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. The CNC milling machine series High-Z/400-T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! The CAM software works off your data accurately and in a very short time and created excelle ...

GranitoGrav photo-gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, commemorative plaques, tiles, glass, mirror glass ... Load colour photos or photos in black and white into the CAD-CAM ConstruCAM 3D software via the specially developed module. You can then enter the output of the desired size and have milling paths calculated. This created file is opened in the machine's control software and therefore sent to the machine. - More is not necessary! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical and short time and thus creates first-class photos in all the above-mentioned materials with the CNC machin ...

A latch is manually placed on the filled bottle. By pressing the Capper on the lid of the screwing process starts automatically. An additional operating of a lever or button is not necessary. Technical data: -pneumatic type -Adjustable torque -automatic pressure start -40 mm standard screw head (suitable for z.B: Ø 28 mm cover) -50 mm screw head available (can be used up to approx. Ø 40 mm cover) -Capacity: approximately 500-700 / HR -Working pressure: 5 bar Max -Torque: 4 16 kg / cm -Weight: approx. 700 g

GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. The CNC milling machine series High-Z/400-T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! The CAM software works off your data accurately and in a very short time and created excelle ...

I ´ checker advanced type DC70A Technical data: Supply voltage: 18... 26, 4 VDC Power consumption: max 37 Operating temperature: - 20-85 ° C Measuring range: 70A(DC) Accuracy: < 2% typical < 3% Max Protection class: IP20 Mounting: DIN rail -Suitable for DC and AC -RS 485 bus connection via RJ45 -Hutschienenmontange LED indicator -Optical failure Price per piece 50.00 29 STK. in stock

P5 used 50 m³ / 50.000 litres steel tank, double wall, above ground or underground tank, on 2 steel bases, good condition Dimensions: diameter approx. 2,50 m (without base) height: 2.78 m high (with base) length: 10.70 m base width: approx. 0.90 m base distance: 7,86 meters DIN6608 D steel tank, coated on the inside with a 7-fold burnt-in varnish. The tank is double-walled and stands on 2 steel bases. the steel tank / container can be used as fire-fighting water tank, storage tank for water, manure, AHL, ASL, seeping juice, canola oil, rainwater collection tank, etc.. We ca modify the tank to suit your needs as well, e.g. as a fire-fighting water tank or as an underground tank fitted with an outer bitumen coating: please ask us. Price upon request. Transport can be arranged at low cost. Item location is 79098 Freiburg im Breisgau. It is not possible to upd ...

The Rollenspalter is suitable for the columns and crushing of wrapped paper, cardboard or plastic rollers on core, or bail. Power 7, 5kW Control Siemens PLC supported with two-hand safety control -Cutting force 2x20to -Cutting speed 22, 3 mm / sec -Cutting channel length 2000 mm -Cutting channel height 1200 mm -Machine weight approx. 3500 kg colour of machine body RAL 7016 (anthracite grey) Guard RAL 1028 (melon yellow) Photos and more info on request Delivery time: approx. 12-14 weeks

P12 - used appr. 30 m³ / 30,000 litres PE-tank, plastic tank / flat bottom tank, double-walled, former chemical tank, in good condition. capacity: 30 m³ / 30,000 litres diameter inside: appr. 3.00 m outer dimensions: appr. 3.48 m x 4.80 m overall height Double-walled, (i.e. with an outer hull), non-translucid, various connections such as ventilation, inlet, outlet, etc., lid on top of the roof. For transportation the different attachments, level indicator, probes, pipes, etc. will be dismantled and are supplied along with tank. Former hydrochloric acid 31% tank Chemical tank for hydrochloric acid, sulphuric acid, methylated, ironIIIchlorid, formic acid, hydrogen peroxide, acetic acid, etc. The tank's size makes it perfect for placement inside a shed or barn, as a storage tank for water, waste water, sewage, seeping juice, manure, AHL/ASL etc. High-quality plastic t ...

Poly Clip Single-Clipper, suitable for artificial and natural casings, bags and nets The machine is immediately available and can be tested in Koblenz, Germany.

Stratec / Bull fill level inspection. Suitable for liquids wihout foam. User manual incluted Pusher incluted.

used approx. 15 m ³ / 15,000 liter tank of polyester / GRP tank above ground, lying, good condition Dimensions: Ø 2.40 m x approx. 3.80 m long lying tank dome on the top of the tank, multiple connections,-, spouts, etc. The container can be a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, rain collection tank, AHL / ASL, etc are used. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site: profi-tanks(dot)de

Top condition, underground storage tanks, water tank, water tank, underground tank, diesel tank, heating oil tank, single-walled steel tank Content: 30 m³ / 30,000 litres Material: stainless steel tanks, very thick-walled Dimensions: approx. Ø 2.00 m x approx. 10.00 m long Weight: approx. 9.0 t Other: outside with new bitumen paint The container is used, inside empty and properly cleaned. According to the age traces are present. Steel tank / container can be used as storage tank for water, liquid feed, whey, molasses, manure, AHL, ASL, seeping juice, rapeseed oil, cooking oil, rain collection tank, fire water tank, fire water tank, water tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing cont ...

Large number of used food tanks at a special price! Steel tanks in good condition, above ground, standing on 6 bases. Contents: approx. 60 m ³ / 60,000 litres, coated inside Dimensions: approx. Ø 3.10 m x 8.50 m high, with base approximately 10 m overall height weight: 8, 0 t. The tank is lined with a high-quality, food-approved inner coating, see photo. Completely drainable, manhole, and more. Can be used for liquid fertilizer, as raintank, storage tank for water, for liquid feed, whey, animal feed, pig feed, stillage, potato steam skins, molasses, manure, AHL, ASL, seeping juice, canola oil, cooking oil. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has ...

used 50 m³ / 50.000 litres polyester tank / GRP tank good condition, with chemical protective layer from the inside, above ground, on ring base. dimensions: Ø 3,0 m x approx. 7.80 m high very thick walls, dome on top of the tank body, several connections above, incl. suction line inside and lower outlet The container can be used as storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, canola oil, AHL/ASL, rain collection tank, and so on. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More inf ...

used approx. 3 m³ / 3,000 litres polyester tank / fibreglass tank / transport tank Manufacturer Rotband, a very good quality, above ground, lying, 2 steel bases, good condition Dimensions: L = 1.65 m x W = 1.40 m H = 1.90 m GH with base 2.15 m dome on the front, several in - and outlets The container can be used as storage tank for juice, canola oil, water, liquid food, whey, potato steam skins, molasses, liquid manure, AHL, ASL, as rain tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site: pr ...