129,247 used machines on RESALE, but how to find them? Machine Search
Ref. -No.: 10320 Manufacturer: TOS Type of control: Digitalanzeige - Mitutoyo Control: Konventionell Storage location: Halberstadt Country of origin: Tschechien Tip length: 1500 Centre Height: 280 mm Centre Distance: 750,1000,15000,2000 mm Spindle Bore: 56 mm Swing diameter over bed: 500 mm Number of speed levels: 18 Circumferential diameter over the support: 320 mm Circumferential diameter over the bed recess: 560 mm Bed length relieved from headstock: 300 mm Universal chuck diameter: 250 mm Diameter of the clamping disc: 500 mm Further information: Universal center lathe
Lathe TOS SUI 40-50 Center width 1500 mm Circulation over machine bed 500 mm Circulation over support 320 mm Spindle speed 14 to 2240 rpm Quick Release - Steel Bracket § Jaw wedge bar chuck Machine is ready for operation and in good condition
Offered are 3 Fixed sticks for SUI 80 TOS TRENS SK bezels little used
turning diameter over bed: 800 mm turning diameter over slide rest: 860 mm turning length: 6000 mm turning diameter: 800 mm swing diameter over bed slide: 800 mm swing diameter over cross slide guide: 520 mm spindle bore: 71 mm speeds: 11,2 - 1800 U/min volt: 400 V chuck: 315 mm chuck: 630 mm total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- HeidenHain ND-780 with 3 axis Read-outX, Zo, Z - HeidenHain LS388C Scales - 2 x CE-Chuck cover for 500 & 900 mm - SCHUNK 3 chuck Ø 400-102 - Bison 4 chuck - Steady rest Ø 30 - 210 mm - Steady rest Ø 210 - 370 mm
dubbel kop slijper kop kan 180° draaien om te snel te wisselen van slijpsteen
TOS Galanta SUIL 40A – Lead and Pull Spindle Lathe For sale is a well-preserved and mechanically overhauled 2009 TOS Galanta SUIL 40A lead and pull spindle lathe, built in 1998. Specifications Manufacturer: TOS Model: Galanta SUIL 40A Machine number: 0219 Year of manufacture: 1998 (mechanically overhauled 2009) Dimensions: approx. 2.2 m × 1.1 m × 1.75 m Weight: 1620 kg Main drive: 5.5 kW Spindle speed (max.): 3150 rpm Spindle bore: 50.2 mm Center spacing: 1000 mm Center height: 200 mm Turning diameter over bed: 400 mm Condition: ready for use (used) Accessories Three-jaw chuck Tailstock Lunette Coolant Setup Interchangeable Wheel Set Operating instructions (German) The machine is fully functional. Viewing possible by appointment
Key data: 1100 mm, 2 , 180 mm
Broadband KÜNDIG Made in SUISSE - 1100 mm grinding width, 180 mm height - 2nd strip with: three-roller units / 2nd grinding roller with shoe for fine sanding - Grinding table Fix Sodas can be sanded in a continuous flow ( KUNDIG patent) - Electronic control The machine is immediately available from stock The price is: 4.900,-€ net from stock. That's a great price! A demonstration is possible
colstress holder SK50 with inner suit thread In a suitcase with collets according to photos Special price Lid Hermle Weiler Meuser Kunzmann Wanderer Ruhla Weipert Wohlenberg
NEW ! all stainless steel suitable for eurobins of 200L discharging height : ± 700-900 mm 1,5 kW mobile ± 300 kg dimensions (l x w x h) : ± 1.800 x 1.100 x 1.300 mm
Suitcase lock, quick-release fastener, suitcase lock -Number: 76x closures available -Price: per piece -Minimum order quantity: 10 pieces -Dimensions: 70/45/H13 mm -Weight: 0.1 kg
Air flow monitor suitable for BOFA AD Oracle (IQ), pre-assembled in 75 mm pipe, incl. connection cable (2m, 4x0.25mm²) To monitor the actual airflow for presence. Supply voltage 24V. The figure shows our version with potential-free switching contact. Article-No. MA-201151 Also available as flange version. Hoses and sleeves are not included. Other types on request. Delivery EXW, collection possible
Item tool holders for milling machine with SK40 (inner suit M16) DIN 2080 SK40-ER16 Long milling mandrels for Horzon valley milling in different diameters, partly with bearings Short milling mandrels for holding cutter heads Recordings with Morse cone in different sizes Everything according to photos
Immersion Cooler, Two-Stage Cooling suitable for Mettler Toledo DSC8822eCooling Unit, Water Cooler, Chiller, Laboratory Cooler, Cooler, Immersion CoolerTHERMO HAAKE Type EK90 / MTTyp No. 003-4403Ser. Nr. 1200001655/004Year of construction: 2000Working temperature range -90 ... + 40 CCothing: 300 W (at 20 C)Coolant R23 + R404ASsmoke length: 2000 mmImmersion sleeve d x L: 18 x 70 mm (suitable for Mettler Toledo DSC822e)Mains connection: 230 volts, 50 HzPower consumption: approx. 1 kW- cooling circuit with 2
LA322147950, brake disc suitable for Fendt / Laverda / Massey Ferguson, price per piece
Boom suitable for Volvo ECR 88 (year of construction 2005, s/n: 10296)
volume bucket for Genie / Terex attachment, 200 cm width, 1.60 m³ capacity, many other attachments on stock
suitable for 5 t excavator
NEW, Genie / Terex adapter with Euro mount, 140 kg dead weight
BIG suitable for Volvo BM / Liebherr 514, - Year of construction: 2025, - made of S355 steel, Dimensions:, Top bolt: Ã 61.5 mm, Bottom bolt: Ã 51 mm, Bolt center-to-center distance: 617 mm, Further recordings also available!
Spoon set suitable for Lehnhoff SW01/MS01 with Symlock holder, - 100cm sloping bucket/swivel bucket - 74l volume - 90kg, - 40cm backhoe bucket with 3 teeth (removable) - 46l volume - 38kg, - 20cm backhoe bucket with 2 teeth (removable) - 20l volume - 28kg, Suitable for 1.5-2.5t excavators
BIG suitable for Volvo BM / Liebherr 514, - Year of construction: 2025, - made of S355 steel, Dimensions:, Top bolt: Ã 61.5 mm, Bottom bolt: Ã 51 mm, Bolt center-to-center distance: 617 mm, Further recordings also available!
Spoon set suitable for Lehnhoff SW01/MS01 with Symlock holder, - 100cm slope bucket/swivel bucket -74l volume -90kg, - 30cm backhoe bucket with 3 teeth (removable) - 33l volume -32kg, - 50cm backhoe bucket with 2 teeth (removable) - 59l volume - 42kg, Suitable for 1.5-2.5t excavators
BIG suitable for Volvo BM / Liebherr 514, - Year of construction: 2025, - made of S355 steel, Dimensions:, Top bolt: Ã 61.5 mm, Bottom bolt: Ã 51 mm, Bolt center-to-center distance: 617 mm, Further recordings also available!
BIG suitable for Merlo ZM2 and Heavy Duty attachment, - Year of construction: 2025, - made of S355 steel, - HD version, Dimensions:, Top bolt: Ã 50 mm
BIG adapter JCB Q-Fit suitable for Euro mount, NEW, - Year of construction: 2025, - Own weight: 160 kg
Earth drill suitable for 8 - 22 t excavators
Volvo 4in1 folding shovel, suitable for Volvo L25, 180cm working width
285 cm working width, suitable for Doosan, Daewoo wheel loaders
NEW, width 200 cm, 396 kg net weight, 0.98 m³ capacity, with Komatsu mount
Replacement tooth small suitable for Hammer RH25 Demolition Pulverizer
Gasket set suitable for Hammer HM 200-250, also other gasket sets such as for HM300 / HM 1300 / HM 150 / HM250 available!
NEW, suitable for telescopic loader & Unimog wheel loader, 1 piece à ⬠400,-
New slewing ring suitable for Volvo ECR88 mini excavator
With 50mm bolt, mounting width 190mm,, matching VTN - Nino de Martis, Martin (old version) recording
In stock on pallet Auction-ID: A1-45003-155
Good condition Very light Auction-ID: A7-45427-211
maximum number of results exceeded
please refine your search
50 € 
