136,835 used machines on RESALE, but how to find them? Machine Search
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 125 mm -without: interchangeable jaws -Passage: Ø 32 mm -Number: 1x feed available -Price: per piece -Weight: 5.4 kg
Centrifugal pump, water pump, multi-stage vertical centrifugal pump -Max. Delivery rate: 2.0 m³/h -Max. H: 14.5 m -Motor power: 1.97 kW -Speed: 2840 rpm -Quantity: 1 piece available -Dimensions: 380/205/H285 mm -Weight: 33kg/
Cutting range round 0°: 127 mm Cutting area flat 0°: 125 x 130 mm Cutting range round 45° right: 90 mm Cutting area square 45° right: 90 x 90 mm Cutting range approx. 60° right: 45 mm Cutting area square 60° right: 45 x 45 mm Vice opening: 130 mm Band saw blade dimensions: 1440 x 13 x 0.65 mm Cutting speeds: 30 - 80 m/min Motor power: 0.55 kW Voltage: 230 V Weight approx.: 25 kg Characteristics: - Two cutting speed levels for optimal adaptation to the workpiece - For miter cuts, the saw bracket can be swivelled up to 60° - Including workpiece stop for rational work - Optimum cutting results thanks to band saw blade guide with ball bearings - High-torque engine, even under continuous load - Under load, the motor electronics keep the cutting speed largely constant - Environmentally friendly, as there is no need for lubricating and coolant fluids - Smooth, low ...
Bohrleistung in Stahl (-Ø: 45 mm throat: 1250 mm workpiece height max.: 1100 mm swival range +/-: 360 ° height adjustment: 745 mm base plate surface area: 1450 x 920 mm Bohrspindel-Ø/ Aufnahme: 90 mm / MK 5 bore spindle stroke: 355 mm max. torque on the spindle: 250 Nm feed power: 14000 N turning speed range: 20 - 1200 U/min feed range: 0,063 - 0,63 mm/U power capacity: 3,7 kW weight of the machine ca.: 3,0 t dimensions of the machine ca.: 2,1 x 0,9 x 3,3 m • cube table 650 x 650 x 500 mm, • coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Kneader Kemper F125 SL Kneading Machine Menger -Lifting kneader with fixed boiler -for max. 200 kg dough or .max 125 kg flour -with 2 speeds -Stainless steel boiler and lifting arm -with flour dust cover -Boiler diameter inside 90cm -Boiler height inside approx. 50cm -can be used on wheels with 2 locks
Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate -T-slot plate comes from: a WMW drilling machine -Travel: approx. 1200 mm -Clamping plate width: 1405 x 1250 mm -Dimensions: 2900/1350/H940 mm -Weight: approx. 1200 kg
Sputter target, tube, pipe -Pipe dimensions: Outer: Ø 152 mm Inner: Ø 125 mm Total length: 3249 mm -Number: 2 pipes available -Price: Complete -incl. transport crate -Box dimensions: 3600/570/H585 mm -Weight: 306 kg
Spiral kneader Kemper ST 125 A + 2 boilers used spiral kneader Kemper ST 125 A extendable with 2 stainless steel boilers immediately available in the warehouse in Bielefeld. Trade-in and shipping costs on request. Type: SP 125 A with 2 boilers, optional extra boiler to purchase for max. 125 kg flour or for max. 200 kg dough with 2 automatic timers Boiler diameter 90cm -Bott capacity: 300 litres Boiler drive by friction wheel Boilers are manually locked extendable with 2 automatic timer relays 2 speeds fast and slow Flour dust cover Stainless steel spiral and tools Boilers are also made of stainless steel Machine is anchored in the ground with 2 screws Machine head moves up and down when the boiler is retracted and extended 400 volt power supply robust and stable machine Tested for function
PVS -Micro-Cut or emulsifiers. Formerly called Kolidmühle For shredding various products Production of emulsions Pastes Sauces Soups and various other products Capacity up to 150 litres Motor power 15 KW
Pendulum jaw with 125mm width and 160mm width available Strongest version on the market! Extremely flexible.
Micrometer, micrometer screw, measurement of tooth width, plate measuring surfaces -Measuring range: 100-125 mm -One revolution of the drum corresponds to: 0.5 mm -without locking device -large measuring areas -Measuring force: ratchet -Including case Setting mass -also other sizes available -Weight: 1.0 kg
Pendulum jaw for 125mm width and 160mm width Extremely flexible. Strong execution.
Column Mounted Crane KONECRANES Capacity: 125 KG Year of construction: 2009 Height under hook: 2,5 meters max Machine delivered with: 1 rudder (Max capacity: 100 KG) Total length: 5 meters
Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 125 mm -Height: 30 mm -Socket: Ø 30 mm -Number: 1 cutter -Price: complete -Weight: 2.2 kg
Rotary table, rotary indexing table, dividing head, dividing head -Chuck size: 125 mm -Feed: Rohm -Division: 12 -Height: 300 mm -Dimensions: 170/170/H300 mm -Weight: 19 kg
Capacity, ton 1250 Stroke, mm 500 Maximum drawing depth,mm 200 Min number of no-load stroke: 14 /per min Slider adjustment, mm 315 Max. shut height between bolster plate and slider (stroke down, adjustment up), mm 1250 Table size, mm 1600 x 1800 Slider size, mm 1530 x 1800 Aperture in a table, mm 1100 x 1100 Distance between columns, mm 1600 Cushion travel, mm 200 Cushion capacity, ton 200 Maximum push force ton 31.5 main motor power, kW 125 Press overall dimensions: 5850x3100x8950 mm Press weight, kg 195000
Tool holder, milling holder, milling tool -Adjustment: SK50 -Test pin: 50 x 125 mm -Number: 1x recordings available -Price: per piece -Weight: 4.6 kg/piece
Gear motor Flender MBH 125CC-B 27.7/1 Bevel helical gear drive motor 11 kW at 1400 1/min. 230/400 V, 50 Hz, IP 55 were operated with frequency converters Matching Freqenzumrichter Walther Flender ZZ0103069.34003 Sinus Penta available A total of 15 traction motors and 12 drives ! available Very good condition, straight from production!
Lifting mixer Kemper F 125 ASL extendable - with 2 speeds - with 2 automatic timers - with stainless steel lifting arm - max. 125kg flour or 200kg dough per kettle - with flour dust cover - Boiler with handle
SCHAUBLIN 125 High precision lathe Diameter over the bed 270 mm Diameter over cross slide 120 mm Height of centers 125 mm Bed length 1000 mm Distance between centers 500 mm Spindle speed 45-3000 rpm Spindle nose Camlock D1-3 " Rapid traverse of the carriage 440 mm/min Longitudinal stroke 90 mm Cross travel 130 mm Vertical power feed 4-260 mm/min Metric threads 0.25-3.5 mm Spindle for collets B32 Tailstock cone MK 2 English pitches 112-6/1″ Special pitches 0.25-8 mm Top slide travel 100 mm Cross slide travel 180 mm Dimension 1500 x 850 x 1300 mm Weight approx. 950 kg
Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Number: 36x spindle tools -Take: SK40 -with: CNC pull studs -different shaft sizes: 30-125 mm -Price: complete -Weight: 86 kg
Inv. Num. : 6637 Type: SRM 125-4000 Producer: Škoda Generated: Parameters: Control system: SIEMENS SINUMERIK 828 D Maximum turning length: 4000 mm Maximum turning diameter over bed: 1250 mm Maximum turning diameter over support: 900 mm Maximum workpiece weight: 14000 kg Turning diameter: 1030 mm Travel speed of the Z-axis and X-axis: 2000 mm/min Rapid traverse X: 3000 mm/min Rapid traverse Z: 6000 mm/min Equipment: Feed drives Siemens DRO Heidenhain
Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Number: 9x spindle tools -Take: SK40 -different shaft sizes: 85-125 mm -Price: complete -Weight: 17 kg
Hydraulic pump, oil pump, gear pump -Drive: 2.2 kW 1420 rpm -Dimensions: 550/280/H260 mm -Weight: 40 kg
A used spiral kneading machine Kemper SP 125 L is currently for sale and immediately available in our warehouse in Bielefeld. Spiral kneading machine Kemper SP 125 L - Stainless steel boiler - Stainless steel spiral - 2 x automatic timers - 2 x slow and fast speeds - with flour dust cover - for 125 kg of flour or 200 kg of dough The machine can be inspected and tested in our warehouse. Shipping and trade-in as well as further information and pictures on request.
Centrifugal pump, water pump -Pump: is sold as dismanteld -Delivery rate: 18-50 m³/h -max H: 12.7-8.5 mWs -Motor power: 2 kW -Speed: 2825 rpm -Pipe connection inlet: DN65 -Pipe connection outlet: DN50 -Dimensions: 460/280/H240 mm -Weight: 37 kg
Centrifugal pump, water pump -Delivery rate: 20-50 m³/h -Max. H: 14-9 mws -Motor power: 1.85 kW -Speed: 2825 rpm -Pipe connection inlet: DN65 -Pipe connection outlet: DN40 -Dimensions: 530/270/H300 mm -Weight: 45 kg
Fong Kee (Taiwan) Year of manufacture 2016 Double Head (125mm screw) Accumulator type continue extrusion machine Machine In production Product type 160 Liter Float Dimensions 1188mm x 875mm x 407mm net weight 9kgs gross weight 17kgs estimate production rate 30/32pcs per hour Mold dimensions 1300mm x 1260mm x 860mm
Kemper Lifting Kneader F125 ASL extendable with 2 stainless steel shells 2 speeds 2 timers Stainless steel lifting arm Year of construction: 2001 Flour dust cover overhauled and repainted
AGFA ADAMAS 125 COU ( Clean out unit ) Washer for Adamas printing plates. Excellent condition, little used. online version without tables. Stock! AGFA ADAMAS 125 COU ( Clean out unit ) washer for Adamas processing. Excellent condition, was very rare in use. Online version without infeed and outlet. Processor is on stock and can be inspected on appointment.
Centrifugal pump, water pump -Type plate: unfortunately not available -Delivery capacity: 20-50 m³/h -Max. H: 14-9 mWs -Motor power: 1.85 kW -Speed: 2825 rpm -Pipe connection inlet: DN65 -Pipe connection output: DN40 -Dimensions: 540/290/H310 mm -Weight: 49kg
Capacity, ton 1250 Stroke, mm 500 Min number of no-load stroke: 8 /per min Slider adjustment, mm 215 Max. shut height between bolster plate and slider (stroke down, adjustment up), mm 1100 Table size, mm 1600 x 1850 Slider size, mm 1300 x 1400 Table gap size, mm 1100 x 1100 Distance between columns, mm 1630 Distance between slides, mm 1580 Cushion travel, mm 200 Cushion capacity, ton 200 main motor power, kW 90 Press weight, kg 110000
Transport rollers, wheels, casters, carrying rollers -comes from a grandstand complex -Roller diameter: 125 mm -Number: 92 sets of rolls available -Price: per piece -Dimensions: 355/135/H50 mm -Weight: 2 kg -Unfortunately, no information is available regarding load-bearing capacity.
Transport rollers, wheels, rollers, support rollers -comes from a grandstand system -Rollers diameter: 125 mm -Number: 108 sets of rolls available -Price: per piece -Dimensions: 505/135/H50 mm -Own weight: 2 kg
The scope of delivery includes: 01x DB-Gitterbox, used Design: incl. floor overall width: approx. 1,250 mm total depth: approx. 840 mm total height: approx. 970 mm Note: It is a used DB lattice box. There may be scratches, dirt and other signs of wear. Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.
Stock # U2421-1 Used vertical stainless steel (AISI 304) mixing tank by ZUGIL (PL) with a working volume 12500 l. Inside dimensions: diameter 2600 mm x length of straight side of wall 2550 mm. Tank has top mounted 2 level paddle type agitator, driven by reducer and el. motor with power 4 kW, 380 volt 3/50 Hz. Working rotation of agitator up to 18 rpm. Agitator is supported at bottom. Mixing chamber is equipped with 4 baffles welded to the wall. Top flat, with bolted stainless steel cover, equipped with hinged inspection manway. Bottom, elipsoidal, welded, with central discharge outlet. Tank is mounted on (3) legs carbon steel legs. New 2003. Last time used in chemical production.
Nowicki KN1-125 Bowl cutter Stainless bowl cutter, 125l bowl, six blade assembly, variable speed, safety guarded lid, discharge arm, external control panel, 51Kw, 3Ph
Hydraulic motor, oil motor, hydraulic pump -Power/torque: 19.3 Nm/bar -Speed: from 5 to 500 rpm -Max. Pressure: 315 bar -Swallowing volume: 1265 cm³/rev -Dimensions: 500/500/H550 mm -Weight: 246 kg
Bending tool, die, lower tool, die tool, hemming tool, press tool, forming tool, clamp pressing tool, upper tool -Die tool: Forming tool / press tool -Socket: Ø 40 mm -Print area: 125 x 15 mm, see photo techn. drawing -Dimensions: 125/50 / H163 mm -Weight: 4.3 kg
Pneumatic Cylinder, Air Cylinder, Pneumatic Stamp, Air Stamp -Pneumatic cylinder: stroke 125 mm -Piston rod: Ø 10 mm M10 -Dimensions: 267/35/H55 mm -Weight: 0.4 kg
Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders, clamping cylinders -Manufacturer: Festo, standard cylinder type DN-125-250 S6 PPV -Stroke: 250mm -Piston: Ø 125 mm -Piston rod: Ø 32 mm / M24 x 2 -Max. Pressure: 10 bars -Dimensions: 530/140/H140 mm -Weight: 12.7 kg
maximum number of results exceeded
please refine your search
