suction feeder used for sale

Description: INDUSTAR air recycling systems, type: 1N80A2, volt 220V weight approx.: 100 kg, Approx. Onsite Dimension. (l x w x h): 1,450 x 700 x 800 mm

Key data: 250 mm, 4 kW, 4060 m³/h

arke: Holtrop Jansma Clean Air Extraction Type: MSO 250 Year of construction: 2016 M-No.: W0056730S Clean air extraction: MSO 250 with flame protection device Intake support: ø250 mm Length: 2,250 mm Width: 1,230 mm Height: 2,840 mm Weight: 600 kg Capacity: 4,060 m3 /hour Pressure: 1,900 Pa Power supply: 4.0 kW, 380V, 9 Amp Filter surface: 27 m2 Filter bags: 30 pcs. Length of filter tubes: 1,450 mm Filter tube diameter: 200 mm Cleaning: included Noise: dB(A) Flame protection system: automatic fire extinguisher with powder extinguishing agent, automatic slider in the return air duct, automatic electrical shutdown of the extraction (New powder fire extinguisher witrd assembled before delivery) Scope of delivery: filter system, with built-in intake fan, control cabinet, automatic fire extinguishing installation with flame protection damper

Key data: 160 mm, 3 kW, 2050 m³/h

Brand: Höcker Polytechnik Type: VacuMobil EA 160A Intake manifolds: ø160 mm Length: 1,300 mm Width: 900 mm Height: 1,900 mm Capacity: 2050 m³/h Pressure: 2,580 Pa Motor: 3kW Cleaning: included Filter area: 9.2m2

Offer 23428 Technical data approx.: - Load capacity with 8 suction cups at 60% operating vacuum - Horizontal 0.15 t - Suction cup diameter 150 mm each - Adjustable suction cup distance - length up to 2500 mm - Depth up to 750 mm - Distance or height lower edge of suction cup – crane hook 380 mm - Vacuum motor power 0.18 kW - Connection 400 V - Space requirement approx. W 2500 x H 750 x D 1200 mm - Dead weight approx. 70 kg

Description: with KOCH granule suction unit, type 3070D BELIK, year 2019 Approx. Onsite Dimension. (l x w x h): 1,800 x 1,600 x 3,000 mm, weight approx.: 180 kg

Suction nozzle diameter: 120 mm or 100 mm; Nominal flow rate: 1900 m³/h; Spahnsack volume: 1 x 110 l; Filter cleaning: manual; Motor power: 1.1 kW; Machine height: 1000 x 500 x 1800 mm (L x W x H); Weight: 39 kg;

Suction nozzle diameter: 150 mm or 2 x 120 mm; Nominal flow rate: 3000 m³/h; Chip bag volume: 2 x 1.3 m³; Filter cleaning: manual; Motor power: 1.5 kW; Dimensions: Weight:

Centrifugal fan REITZ type MAE 045-017030-00 Fabr. No. 601438 Year of construction 2017 Volume flow 10200 m³/h = 170 m³/min. Pressure p 1.2 kg/m³ Air inlet 300 mm (nozzle diameter in base plate) Air outlet 345 x 345 mm Engine speed 2940 rpm. Motor power 18.5 kW Mains connection 400 Volt 50 Hz - Fan impeller with 8 fan blades - directly flanged drive motor - flange dimension for air outlet 450 x 450 mm - stable metal housing made of 8 mm steel Space requirement L x W x H 1930 x 1240 x 950 mm Weight centrifugal fan 500 kg very good condition, only test run completed; used

Centrifugal fan REITZ Type: MAE 031-007130-00 Fabr. No. 601475 Year of construction 2017 Volume flow 4260 m³/h = 71 m³/min. Pressure p 1.2 kg/m³ Air inlet 250 mm (nozzle diameter in the base plate) Air outlet 245 x 195 mm Engine speed 2915 rpm. Motor power 7.5 kW Mains connection 400 Volt 50 Hz - Fan impeller with 9 fan blades - directly flanged drive motor - flange dimension for air outlet 310 x 260 mm - stable metal housing made of 5 and 6 mm steel Space requirement L x W x H 1390 x 1030 x 600 mm Weight centrifugal fan 200 kg very good condition, only test run completed; used

Description: Attachment dryer type THD25E, tank dimension: diameter about 340 mm x 430 millimeters , Suction conveyor type TAL300 NE weight approx.: 70 kg, Approx. Onsite Dimension. (l x w x h): 800 x 800 x 2,100 mm

Description: bearing load 150 kg - 4 roller protectors Approx. Onsite Dimension. (l x w x h): 600 x 270 x 200 mm, weight approx.: 15 kg

Article number: 27-06-184 Manufacturer: Cutting machine Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1985 L x W x H: approx. 1000x1400x1200mm Weight: approx. 300kg Cutting machine for round parts for distortion-free face cutting Cutting width: approx. 220mm Cut-off wheel diameter: approx. 300mm diamond Jaw chuck speed: approx. 150 rpm Accessories  Diamond Wheel  3 jaw chucks Ø 250mm + 2 jaw sets  Mobile extraction ( Höcker Polytechnik ) Other accessories on request Price and other technical data on request

Description: • Suction system with bag filter unit • Extractor fan with 7.50 KW-1455 rpm motor • Upper filtration part with bag filters Approx. Onsite Dimension. (l x w x h): 5,100 x 1,500 x 4,800 mm, weight approx.: 2,000 kg

Description: device number: 090113 max. permissible operating pressure: 10 bar voltage 380 V Approx. Onsite Dimension. (l x w x h): 1,500 x 1,100 x 1,800 mm, weight approx.: 190 kg

Description: SUBMERSIBLE SLURP PUMP, IP55, 2.6KW, 3000 1/MIN, 220-240/380-420V 50HZ, FLOW RATE 600 L/MIN AT 12.0M, DELIVERY HEIGHT, SUPPLY DEPTH 570MM, PIPE CONNECTION G 2 1/2, MAX. SOUND PRESSURE LEVEL 76 DB (A), WITH HARTING PLUG-IN CONNECTOR: 10-PIN DESINA, TAL901/570-MVX+227. Used in milling or grinding machines to pump around the cooling oil. Approx. Onsite Dimension. (l x w x h): 1,400 x 1,400 x 1,300 mm, weight approx.: 100 kg

Description: serial number 197100-02-BAID018 power DC12V/1A Approx. Onsite Dimension. (l x w x h): 350 x 150 x 180 mm, weight approx.: 1 kg

6 feeders

delivery belt, compressor, 340 x 392 mm

SK40 DIN 69871 Oil Feeder met Holder Weldon 40mm A= 65mm For internal cooling for rails without internal cooling through the spindle

SK40 DIN 69871 Oil Feeder Weldon 32mm

Specification IMPERIA F + feeder + Special batch Delivery · Nr. 1 (one) S/H IMPERIA F 120x165cm with electronic feeder and special batch delivery system, delivered, controlled and checked with 6 months warranty · Year of manufacture 2000 · with electronic feeder (no high pile) · Speed Approx. 1350 strokes per hour · min board thickness 400gr/m² · Corrugated board thickness max 7mm · pneumatic clutch- variable speed, · Equipped according to CE regulations · special suction cups with 50mm telescopic – pneumatically adjustable arms · SPS System · PICARD die cutting plate · micrometric adjustment of the pressure in addition to the standard one · special universal chase-mobile delivery table for conveying blanks, pneumatically controlled with automatic lowering device allowing to the opera ...

Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Feeding length automatic feeder: 0 mm Sawing speed 11 – 14 – 18 – 20 – 22 – 36 M/Min Length:2.200 mm  Width:900 mm  Height:1.400 mm  Weight:1.200 kg 

- Feeder motherboard - HP Part Number 5188-6595 - for HP Indigo Series 2 Machines

- SP Feeder Air Release Servo Motor - HP Part Number CA397-01120 - for HP Indigo Series 2 Machines

- SP Feeder Bridge Registration Motor - HP Part Number CA397-01980 - for HP Indigo Series 2 Machines

- SP Feeder Pressure Valve with Servo - HP Part Number CA397-01600 - for HP Indigo Series 2 Machines

- SP Feeder Drawer Motor Assy - HP Part Number CA397-01630 - for HP Indigo Series 2 Machines

Coiltech Decoiler and Feeder It is like new, only 1 month used Carrying capacity : 2500kg Steel width capacity : 40-400mm Steel thickness capacity : 0,5-5,0mm More details : https://www.coiltech.tr/ana-sayfa---eng.html

The Coiltech Decoiler Straightener Feeder System is a compact press feeding system. Belt width: 600mm, material thickness: up to 6.5mm, straightening rollers: 7x115mm, decoiler tonnage: 6000kg, diameter (inner), min-max: 470-520mm. Connected load: 7.5kW, with documentation.

Suitable for roll goods, voltage: 400V, power connection: 10A, with edge control.

Bar feeder LNS Hydrobar Type HYS 6.36HS-4.4 Year of construction 1990 the holes have the following diameters: 45, 41, 36, 30, 25 ,15,5 The offer is aimed exclusively at traders within the meaning of § 14 BGB No sale to private individuals!

Multisaw ZLT 500 edger with 500/120 feeders – Czech production – a movable shield with the possibility of installing several shields TECHNICAL PARAMETERS: cutting width 500 mm cutting height 120 mm Min. material length 800 mm .max. disc diameter 450 mm one disc movable sleeve 70 mm fixed sleeve length 100 mm engine power 45 kW two upper pressing rollers four lower pulling ones feed smoothly adjustable on the inverter shaft support two rows of pawls max material width 700 mm length of feed rollers 3000 mm roll width 700 mm roll diameter 70 mm receiving table 6200 mm chain width 60mm seven pressure rollers two bottom pull rollers transport dimensions (length / width / height) 700 / 245 / 180 cm weight 3000 kg

Four-sided planer Weinig Hydromat H25N with feeder 100 m/min - German production - hydraulic feed up to 100 m / min - for wet wood - serving table TECHNICAL PARAMETERS: planing width 250 mm planing height 190 mm spindle diameter 50 mm electric height adjustment 1 bottom spindle 15 kW 2 right spindle 7.5 kW 3 left spindle 15 kW 4 right spindle 7.5 kW 5 upper spindle 7.5 kW 6 upper spindle 15 kW 7 bottom spindle 7.5 kW 8 x universal spindle 1800 7.5 kW infinitely adjustable feed rate up to 100 m/min feed pump motor power 22 kW nine rollers in the pulling countertop, three of which in front of the first head seven steel pulling upper rollers four upper rubber pulling rollers pneumatic clamping 1-6-7 spindle joint automatic countertop lubrication feeding table 3000 mm Speed adjustable smoothly up to 100 m/min two upper pneumatic rollers six bo ...

Schubert sleeve and case packing system with subsequent palletizer also available from Schubert. Mint condition. See Exposé

Feeder Köra AF-500 Advanced Feeder; good condition; cleaned and tested; Format min.25x60mm, max.550x500mm; Speed max.180m/min.; Product thickness max.30mm; Compressed air required. Feeder Köra AF-500 Advanced Feeder; good condition; cleaned and checked; size min.25x60mm, max.550x500mm; spedd up to 180m/min.; thiknes max.30mm; pressure air needed.

Enveloppe feeder Make PGF Model Maxi Feeder Year 2005 Min Size 100 x 110 mm Max Size 450 x 450 mm Table height motorized adjuatable from 40 - 75 mm Details vacuum-blower pump, PGF delivery belt A Available direct

Reel, unwinder, motorized reel for sheet metal processing, motorized reel, unwinder, sheet metal unwinder, belt feed system, belt system for eccentric press, hydraulic press -Manufacturer: Cisam Impianti, belt feeding system FEEDER -Type: 1000/2B -Passage: 395 mm -Individual components: see photos -Dimensions: 1340/920/H1690 mm -Weight: 829kg

Muller Martini Presto with 7 Feeder Age: 2001 Format max: 305 x 365 mm Format min: 100 x 145 mm Speed: 9.000 cycles/hour Counter: 6.515 working hours only Machine consists of: 3x Muller Martini Double Feeder MM 1551 1x Muller Martini Cover Feeder MM 1528 1x Muller Martini Stitching Unit MM 1550 with 2x HK75Q stitching Head 1x Muller Martini Three Knife Trimmer MM 1522 1x Conveyor Belt for paper scrap 1x Sheridan Compensating stacker Accessories: 6x Stitching head normal 4x Loop Stitching Heads Different knives for Trimmer Books etc.

General SKU391T1168 LocationBarneveld MakeJöst TypeRUF No.0871679 Year of construction2008 Main Features MaterialStainless steel Length1320 mm Width250 mm Specified Features - Vibro feeder MaterialStainless steel 1.4305 (303) Vibro feedercheck Feeder diameter250 mm Feeder length1320 mm Closedcheck With hoppercheck InletDia. 265 mm OutletDia. 190 mm With vibro motorcheck With motor 0,40 kW, 400 volt, (2x) Without controlscheck Information Mounted on framecheck Total height1,4 m Weight230 kg Floorspace1,40x1,05 m ATEX compatiblecheckMinerals & inorganicOther feedAnimal feedSugarVibro feedersPowdered foodsFeed additivesJöstIndustries > Chemical > Minerals & inorganicIndustries > Food & Feed > Other feedIndustries > Food & Feed > Animal feedIndustries > Food & Feed > SugarConveying systems > Vibro feedersIndustries > Food & Feed > Powdered foodsIndustries > Foo ...

General SKU354T994 LocationBarneveld MakeK-tron TypeSODER LWF D4 No.160302-01/86020 Main Features MaterialStainless steel Motor0.25 KW Inlet diameter100 mm Specified Features - Metering screw MaterialStainless steel 1.4401 (316), Stainless steel 1.4404 Metering screws Metering screwcheck Screw diameter20 mm Pitch10 mm Shaft diameter15,75 mm Screw length200 mm With hoppercheck Capacity± 39 Ltr. Hopper sizesdia. 320x590 mm Inletdia. 100 mm Outletdia. 42 mm With motor0,25 kW With breaking/mixing shaftcheck Motor0,18 kW 380/220 Volt Information Year of construction2001 Mounted on framecheck Floorspace0,6x0,6 m Total height1,35 m Weight160 kgMetering screwsK-tronDosing units > Metering screwsBrand > K-tron What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide  ...

General SKU204U030 LocationBarneveld MakeK-tron TypeK2-ML-T35-DR-PU No.614596/M457280 Main Features MaterialStainless steel Motor0.45 KW Inlet diameter100 mm Specified Features - Metering screw Metering screwcheck Screw diameter38 mm (2x) Pitch20 mm Shaft diameter22 mm Screw length350 mm With hoppercheck Capacity40 l Inlet100 x 70 mm Outlet2 x 38 mm With DC motor0.45 kW, 200 volt, 2000 rpm Screw speed120-600rpm With breaking/mixing shaftcheck Motorcheck Metering screws MaterialStainless steel 1.4301 (304) Information Year of construction9-2015 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace0,8 x 1,4 m CEcheck Total height1,7 m Weight170 kg Extra Specifications- Scale LWF D5 - Serial number # 0614596/1 - Type WMOD -90 KSFT Unit has control system Metering screwsK-tronDosing units > Metering screwsBrand > K-tron What you can  ...

General SKU204U031 LocationBarneveld MakeK-Tron TypeK2-ML-T35-DR-PU No.0614596/2 Main Features MaterialStainless steel Motor0.45 KW Inlet diameter100 mm Specified Features - Metering screw Metering screwcheck Screw diameter38 mm (2x) Pitch20 mm Shaft diameter22 mm Screw length350 mm With hoppercheck Capacity40 Ltr. InletDia. 100 mm Outlet2 x Dia. 38 mm With motorcheck With DC motor0.45 kW, 200 volt, 2000 rpm Screw speed120-600rpm With breaking/mixing shaftcheck Motorcheck Metering screws MaterialStainless steel 1.4301 (304) Information Year of construction3-2013 Mounted on framecheck Mounted on wheelscheck With switchgearcheck(as is) Floorspace0,8 x 1,4 m CEcheck Total height1,7 m Weight170 kg Extra Specifications- Scale LWF D5 - Serial number # 0614596/2 - Type WMOD -90 KSFT Unit has control system Metering screwsK-tronDosing units > Metering screwsB ...

General SKU204U055 LocationBarneveld MakeK-tron TypeK2-ML-T35-DR-PU No.609481/913774 Main Features MaterialStainless steel Motor0.45 KW Inlet diameter100 mm Specified Features - Metering screw Metering screwcheck Screw diameter38 mm (2x) Pitch20 mm Shaft diameter22 mm Screw length350 mm With hoppercheck Capacity40 l InletDia. 100 mm Outlet2 x Dia. 38 mm With motorcheck With DC motor0.45 kW, 200 volt, 2000 rpm Screw speed120-600rpm With breaking/mixing shaftcheck Motorcheck Metering screws MaterialStainless steel 1.4301 (304) Information Year of construction9-2015 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace0,8 x 1,4 m CEcheck Total height1,7 m Weight170 kg Extra Specifications- Scale LWF D5-S - Serial number # 11138195/267980 - Type WMOD -1200N-SFT Unit has control system Metering screwsK-tronDosing units > Metering scr ...

General SKUR1415 LocationBarneveld Makeunknown( missing name plate) Main Features MaterialStainless steel Length1020 mm Width200 mm Specified Features - Vibro feeder Vibro feedercheck Feeder width200mm Feeder length1020mm Closedcheck InletDia. 200mm OutletDia. 200mm With vibro motorcheck Without controlscheckVibro feeders-Conveying systems > Vibro feedersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Thermal Laminating machine / Film to sheet - single sided Make Lamtex Model Ti76 Year 2001 Max size 760 x 1020 mm Materials 90 - 450 grams Speed up to 8.000 sheets an hour or up to 65 meters per minute Feeder HTB Tornado suction feeder Heating system water heated drum with Regloplas P140 smart (2017) Sheet seperation by mean of cut and tear Details 1 Spare lamination roller, suction tapes in feeder, jogger delivery Vacuum pump currently by Venturi, but we have also dedicated pump availalble on request

Laminator - paper over board Zoccatelli Model 1450 Year 2001 Workingwidth 1450 mm Substrate Feeder automatic suction feeder by vacuum belts Laminate Feeder by hand Details with pressing belt Delivery delivery on a table Footprint 210 x 780 cm Condition sold refurbished on most parts (ask details) Available Direct or very soon

Laminator - paper overboard Tùnkers Model S-1450 Year 1997 Working width 1450 mm Substrate Feeder automatic suction feeder Laminate Feeder by hand Details with pressing roll Delivery delivery on a table Condition can be purchased `as-is`or refurbished on most parts (ask details) Available Direct or very soon

5 Color Straight+ Coating + Extended Delivery Year: 10/2004 (Post Drupa model) Max. sheet size (mm): 530 x 740 Number of impressions (mio): 130 Pritnting stock thickness from 0.03 mm to 0.8 mm - Prinect CP 2000 Center - Axis Control - CANopen - PPF Preset Plus Feeder - Pre loader - Suction feeder table - Double sheet control - Steel plate in feeder - AutoPlate - Alcolor Vario dampening - Automatic inking roller washing device - Automatic blanket washing device - Automatic impression cylinder washing device - CombiStar Technotrans - Ink temperature control - CoatingStar - Water base coating Tresu chambered doctor blade - IR CANopen DRY STAR 3000 + hot-air Dryer in delivery - PPD Preset Plus Delivery - Extended delivery (X2) - PowderStar AP - CombiAirStar -Free of damages or repairs on cylinders - Cleaned, checked and sprayed