We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,255 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Suction wall with exhaust air unit, supply air unit, supply air filter, hot water heating register Suction wall: Make : Krautzberger, built 1992 Dimensions: 2.2 x 3.0 x 0.8 m (approx. BxHxT) Fan: 9,240 m3/h suction power, 2 kW Ex Supply air filter, supply fan, WW heater register: Make : Wolf, built 1999 Fan: 10,000 m3/h suction power, 9 kW Heater: 56 kW, 120 degrees C, 3,500 m3/h Pipeline : supply and exhaust air ducts, deflector hood We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.
used
Köttermann suction table with liquid drain. Sold as part of a production shutdown. Specifications 16Amp, 80 Watt. 230 / 400 volts. 50hz Dimensions working space 1.17m x 0.61m x 1.15m H Opening door 0.9 x 0.845m Total dimensions HxWxD 2,80x1,50x0,90 m Inhrud9 Weight 220 kg, Ceramic work surface with funnel basin, media connection: electricity, waste water, Mistakes not ruled out
used
A suction cabinet from BDK is sold. The cabinet can be tested under power. The cupboard is in very good condition. The windshield was damaged during transport at the front. Techn Data: Hosch Filter Supply Air: MXLA- GW 112050090mm Hosch Filter Exhaust Air: MXA-GW 457mm457mm90mm Power consumption 0.63KW El. Connection: 230V AC, 50 Hz Hedging 16A on site Lighting 30 watts User manual available
used
Inlet size: 150x600 mm
used
Material feeder (similar to bar feeder), pick-and-place machine, parts elevator for blanks to automatic lathes, machining and milling machines; -230/400 V; -Overall dimensions: approx. 1300 x 1400 x 3400 mm; -Weight: 200 kg.
used
1 piece Sideros suction system type ECO 6 HC, 9000m3/h for plasma and firing cutting systems for suction firing table from 2.5 m - 3.0 m width (at 500 mm module width) suction and filter system with integrated fan, automatic, dust-duty filter cleaning, Siemens Simatic system control and PTFE membrane filter. The system is designed for a volume flow of max. 5,500 m3/h and a static pressing of max. 2,500 Pa. Filter class M with a separation degree of > 99.9% (BIA use category U,S,G,C). Technical data: volume flow fan 9,000 m3/h Volume flow Filter: 4,000 m3/h Press: 2. 500 PA filter area 60 m2 filter type: PTFE membrane separation degree: > 99.9% cleaning: rotary duesen connection power: 5.5 kW, 10.7 A voltage: 3 x 400 V, 50 Hz compressed air connection: 6.0 bar sound level: < 68 dB (A) dimensions: height: 2,100 mm Depth: 1,413 mm Width: 1,413 mm Weight: 62 ...
used
PLASMA Suction and filtration system FILTERBLOC - TFK PL Series Special central suction and filter system for plasma smoke when burning and cutting the FILTERBLOC TFK PL series TUeV Certified manufacturer according to DIN EN ISO 15012 and CE drawing FILTERBLOC - TFK PLASMA 40/60/80 engine power 5.5/7.5/11 KW air volume 4000/5500/6200 m3/h filter area 124/186/248 m2 Dusting area 4x/6x/8x 84 liters Automatic jet cleaning system with welding smoke class W3 24 months warranty The price information refers to the TFK PL 40 naehere information on request; ready to use
used
Laser smoke extraction and filter systems FILTERBLOC TFK LA Series Special Central suction and filter systems for laser smoke of the FILTERBLOC TFK LA series TUeV Certified manufacturer according to DIN EN ISO 15012 and CE Drawing. FILTERBLOC LASER 30/40/60 engine power 3 KW/4KW/5.5KW air volume 2500/4000/4500 m3/h filter flat 93/124/186 m2 Dusting area 3 x 84 liters/4 x 84 liters automatic jet cleaning System with welding smoke class W3 24 months warranty The price information refers to the TKF Laser 30 naehere information on request; ready for immediate use
used
Suction with electric motor,intake opening D=150mm, blow-out D=115mm, motor 0.6KW
used
Technical data: Application: Laser, plasma and autogen cutting, grinding and welding materials: steel and stainless steel sheets, dry and oil-free cartridges / electric valves: 6 / 6 Nominal volume flow: 3,600 m3/h (at cartridge load of 600 m3/h) Filter area: 84 m2 (21 m2 per cartridge) Dustcollection of Air input diameter: 300 mm Air outlet diameter: 350 mm air temperature/humidity: < 60 C / < 50 % Total oil concentration: 3 mg/m3 compressed air: at least 6-7 bar on Feed-in point, dry and oil-free compressed air consumption: max. 18 Nm3/h - x 50 NLiter s per pulse with max. 6 per minute Filter level: 99.99% Dust emission: < 1 mg/m3 control cabinet: 400 V, 3 phases, 50/60 Hz Control unit: 24 VAC, 50 Hz Geraeusch Level: < 73 dBA x 2 dBA plus pulse surcharge of < 10 dBA x 2 dBA Color: RAL 5015 Width x Depth: 1,305 x 1,382 mm Weight: 640 kg Engine: 7.5 kW 13.2 A 32 A 4.234 Pa ...
used
Technical data: Application: Laser, plasma and oxy-fuel cutting, grinding & welding Materials: Steel and stainless steel sheets, dry and oil-free Cartridges / solenoid valves: 6 / 6 Nominal volume flow: 3,600 m 3 /h (with cartridge load of 600 m³/h) Filter area: 84 m² (21 m² per cartridge) Dust collecting container Air input diameter: 300 mm air outlet diameter: 350 mm Air temperature/humidity: < 60 ° C / < 50% Permissible concentration of oil: 3 mg / m ³ Compressed air: min. 6-7 bar at the feed point, dry and oil-free Compressed air consumption: Max 18 nm ³/h - ± 50 NLiter per pulse with max 6 per minute Filtration degree: 99.99% Dust emissions: < 1 mg / m ³ Cabinet: 400 V, 3-phase, 50/60 Hz Control unit: 24 VAC, 50 Hz Noise level: < 73 dBA ± 2 dBA plus pulse charge of < 10 dBA ± 2 dBA Colour: RAL 5015 width x depth: 1.305 x 1.382 mm Weight: 640 ...
used
Portable fan / exhaust fans Stratos Ventilatoren GmbH Fan with ABB electric motor 0,75 KW, 400V, 50 Hz, 1,9A, 2850U/min Used
used
Suction hose for intercooler Deutz 816 RECON Part number: 0401 6285 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us.
used
Recon Part number: 1227 7624 / 1227 5580 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
used
TEKA filter system ZPF 9 H 3,500 PA 11 KW 8,000 m3 / h good condition; ready to go
used
Section floor area 0.61..0.68 1.6m width 3.10m length : 1.5m x 3.0m 700mm high one suction duct A area of application plasma 24 months warranty ; new
used
NEUMASCHINE - Wet suction system made of steel or stainless steel - Extraction power 1650, 3750 or 7000 m3/h engine 3, 5.5 or 15 kW; NEW MACHINE
used
Manufacturer Ruefli AG SA Biel - Bienne Very powerful exhauster, suction system Spaene suction with filter bag for woodworking machines, Power 2.2kw 2850rpm. machine probably unused except for advance guidance. Special price
used
Mixing soft / empty suction valve Input / output diameter: 38mm
used
Mixing soft / empty suction valve with holder and magnetic valve Diameter input and output: 38 mm
used
Mixing soft / empty suction valve from aluminium with plexiglass disc Diameter input / output: 38mm
used
A used fan is sold: Rippert RV80 - 800-765-B5 Year 2007 (2017 overhauled) 27000m ³/h Booster 1262PA
used
new
Laser vapor extraction and filter systems FILTER BLOC TFK LA Series Special Central suction and filter systems for laser smoke the FILTER BLOC TFK LA series and CQC certified manufacturer according to ISO 15012 and CE drawing. FILTER BLOCK LASER 30/40/60 3KW/4KW/5 power, 5KW 2500/4000/4500 air volume m3 / h m2 filter surface 93/124/186 x 84 liter dust container 3/4 x 84 liters / 6 x 84 liter automatic jet cleaning system with testing for welding fume category W3 24 Months Warranty The price refers to the TCF laser 30 for more information on request; ready to use
used
Extractor fan 4 Fagida MD Year of manufacture 2002 L x W x H: 80 x 60 x 80 cm Weight approx. 120 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Exhaust fan Tube ø 350 mm Fan ø ± 750 mm Engine 11 kW Built in 1995 Weight approx. 190 kg L x W x H: 100 x 80 x 100 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
new
Suction nozzle diameter: 160mm; Nominal flow rate: 1300 m³/h; Bucket bag volume: 2 x 175 l; Filter cleaning: manual; Motor power: 2.2 kW; Dimensions: 1817 x 578 x 2115 mm (L x W x H); Weight: 74 kg; Universally applicable also for plastic, metal, glass, polystyrene, paper and the like Particularly robust construction housing made of galvanized sheet steel chip barrels are powder-coated paddle wheel fan for increased suction power Significantly reduced dust content due to double-woven fine filter bag extractors correspond to dust class L Basic units are pre-assembled in modular design Only short installation times for large systems Top price-performance ratio Short installation times due to modular design SCOPE OF DELIVERY System body with mounted fan unit 1 - 6 chip bags ASA 11 - ASA 21 Extraction unit with plastic impeller ASA 31 - ASA 61 Extraction unit with metal impeller sta ...
used
Suction fan Pipe of 300 mm Engine 4 kW The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Wiedenmann foliage loading blower KLB 645, Honda 4-stroke gasoline engine GX 240, 6.0 kw/8 hp, turbine approx. 380 mm, with suspension for side wall. Incl. telescopic gallows and approx. 3 m suction hose with suction nozzle and handle as well as settling frame with lift. Ready-to-use good condition.
used
- Radial fan GRUSS - Type SP 300 - Motor 11 kW - 2900 rpm Lxzqt - Suction side Round D= 300 mm - Starting side rectangle 300 x 210 mm
used
TECHNICAL SPECIFICATIONS Manufacturer: ADREBA Description: Floating suction dredger Type: Type III Design: Floating on pontoon construction Year of construction: 2000 Excavation depth: 53 m Slurry pump: PK 350-185U Number of mooring winches: 4 pcs. Submersible motor Manufacturer: Marotechniek Unterwasser E-Motor Type: MTOWA-355-4-0691 (400 kW) Jet Pump Manufacturer: IDRECO Type: Norma VdK1 100-250.2 Power/pressure: 77.4 kW / 8 bar BOOSTER PUMP Manufacturer: ANDRITZ Standard Pump Type: ES 100-250.2 Power/pressure: 59.4 kW / 16 bar SPECIFIC COMMENT - Technically very good condition, fully functional - Incl. 20 kV cable with buoys, 300 m - Incl. spare engine (400 kW), Newly overhauled - Incl. spare mooring winch with motor
used
Dimensions (L/W/H): ca. 700 x 500 x 1.080 mm current intensivity: 0,73 / 0,42 A weight: ca. 80 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Code: N0002 Brand: ARIATECH Model: ATE 3 - CE Standard Suction filter with 14 filter bags and 3 collection bags - CE standard Technical data: Motor power Kw 4 N°14 filter bags N° 3 collection bags Overall dimensions: mm 2580 x 720 x 2450 h
used
Extraction unit for filler station or preparation station: Make : Wolf Year of construction : 2009 Dimensions : 1.5 m x 1.5 m x 1.5 m (approx. WxLxH) Volume flow : 19,000 or 9,500 m3/h, 1895 or 948 1/min; 7.5 or 2.0 kW Pipelines : optional exhaust air pipes and deflector hood. Electrics : Control cabinet Location : Warehouse Area Nuremberg Retail price : € 3.350,- net ex location
used
BARATTI FRAMED VACUUM PUMP WITH SUCTION FILTER AND SILENCER Fabr. -No.: 216 105 // Type: ATMOS V4-KR Var. 0102 Equipment / Additional information: Roots Blower Section. oil and wear-free compression, air-cooled, V-belt drive with tension rails and belt guard and two-stage exhaust silencer Incl. the following accessories: -Vacuum relief valve -saugs. Fine filter 3" -Connection piece internal thread 3" - Rohrfederman. -1..0 bar, filled with glycerine -Drive motor Blower data: Max. negative pressure: 500 mbar, abs. Suction volume: 440 m3/h Fan speed: 2920 rpm Noise level: approx. 79 dB (A) Engine data: 7.5 kW, 2930 rpm, 400/690 V, 50 Hz, IP 55 ISO class F, B3, KKL
used
BARATTI FRAMED VACUUM PUMP WITH SUCTION FILTER AND SILENCER Fabr. -No.: 217 325 // Type: ATMOS V4-KR Var. 0102 Equipment / Additional information: Roots Blower Section. oil and wear-free compression, air-cooled, V-belt drive with tension rails and belt guard and two-stage exhaust silencer Incl. the following accessories: -Vacuum relief valve -saugs. Fine filter 3" -Connection piece internal thread 3" - Rohrfederman. -1..0 bar, filled with glycerine -Drive motor Blower data: Max. negative pressure: 400 mbar, abs. Suction volume: 440 m3/h Fan speed: 2920 rpm Noise level: approx. 79 dB (A) Engine data: 7.5 kW, 2930 rpm, 400/690 V, 50 Hz, IP 55 ISO class F, B3, KKL
used
Krämer Lufttechnik Suction VKA-P KFT
used
Specifications: - Load capacity horizontally with 3 suction plates 250 Kg - Suction plate dimension 2 pieces 700 x 700 mm - Suction plate dimension 1 piece 500 x 500 mm - Suction cup spacing adjustable in length to outer edge approx. 3000 mm - Vacuum motor power 0.85 kw - Connection 400 - Distance crane eyelet to suction plates approx. 700 mm - Space requirement W 3500 x D 750 x H 640 mm - Net weight approx. 150 kg
used
- Exhibition unit - Filter generation motorized, mobile, suction side right or left, convertible, height reduction for transport possible ---------- Technical data ---------- Test mark: H3 / BGHM HO 143034, Suction nozzle: 1 x 140 / 160 mm, Nominal volume flow: 1,450 m³/h, Volume flow: 1,593 m³/h, Max. vacuum: 2,200 Pa, Filter area: 9.5 m², Residual dust content: < 0.1 mg/m³, Number of bags: 1 piece, Motor: 2.2 kW, Dimensions (LxWxH): 1,715 x 900 x 2,130 mm, weight: 324 kg, sound pressure level: 69 dW(A), dust class M: AWN 16 ; new exhibition machine
new
Motor for BOFA suction AD Nano+, AD Oracle and AD Oracle IQ Engine A1050017 MA-201060 New original engine
new
Engine A1050024 Motor for BOFA suction systems: Type: AD 500 IQ, AD 1000 IQ , AD 1500 IQ Engine A1050024 MA-201067 New original engine
new
Extraction Fuchs TKFVA103 (filter in OEM quality) MA-105895-E Filter Activated Carbon TKFVA103 MA-105896-E Filter Cartridge FIPA
used
ID3225 Cutter suction dredger Scope of application: sandy gravel, sand and silt for dredging. Thanks to its strong cutting head, it is also able to dredge soil interwoven with root system Length: 24 m, width:7 m, Depth: max.: 1,3 m, Displacement: 153.5 tons Slurry transport distance max.: 1000-1500 m For this, the appropriate pipe length is available. Pipe diameter: 300 mm or 400 mm Pump pressure height max.: 80 m Maximum dredging depth: 12 m Power: depending on the material: 150-450 cbm/hour dry material Cutter Head Suction Dredger Application: Dredging of sandy gravel, sand and silt. Thanks to its strong cutting head, it is also able to dredge soil interspersed with roots. Length: 24 m, Width: 7 m, Depth: max.: 1.3 m, Displacement: 153.5 tons Material transport distance max.: 1000-1500 m The appropriate pipe length is available for this purpose. Tube diameter: 300 mm o ...
used
Metal suction hose Flexible d=130mm Clutch 160x130mm Length 4200mm G&-4949
used
Description blower for material: power: 1.3 kW power supply: 400 V rpm: 2850 g / min
used
Description Three-phase suction unit with filter and receiver. Voltage: 400 V Power: 1.1 Kw Capacity: 7 L Production: 100 - 200 Kg/h
used
Description Three-phase suction unit with filter and receiver. Voltage: 400 V Power: 1.3 Kw Capacity: 7 L Production: 100 - 200 Kg/h New cleaning solenoid valve.
used
Description Receiver without suction unit. Voltage: 24 VDC Capacity: 5 L Power: 0.011 kW
used
Description Single-phase suction unit Voltage: 230V Power: 1 kW Capacity: 5 L Production: 70 Kg/h
used
Description Three-phase suction unit with receiver Aspratore Moretto: V1 S40 Voltage: 400 V Power: 1.1 kW Production: 180 Kg/h Container: Moretto C10 F40 Capacity: 10 L