su used for sale

SUB: FOR SALE... NEW UNUSED CRANK SHAFT ONE SULZER 12 ASV 25/30 AT TURKEY HAVE A GDY SIR WE VE NEW UNUSED CRANK SHAFT OF ONE MAN 12V 25 / 30 (SULZER 12 ASV 25/30) AT OUR STOCK. THIS CRANK SHAFT SUPLIED VIA MAN DIESEL TURBO WE VE ADDATIONALY NEW FULL 1 COMPLETE SET BEARINGS. AND COUNTER WEIGHTS PLS FIND SPEC AT BELOW. SERIAL NO.: 1102209020 (206061045) GRANTHALAYA.ORG NO: 020.08.K. DRAWING NO: 055/057/059/ 221 APROVED VIA: LLOYDS TYPE: ONE 12V 25/30 (SULZER ASV 25/30) READY TO DELIVER. IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With child of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

Working diameter: 40 - 250 mm Automatic work piece loading and removing for ball diameters: 40 - 105 mm Manual loading for diameters: 105 - 170 mm Direct ball attaching: 170 - 250 mm Rotation speed, stepless: 10 - 300 rpm Grinding spindle speed range: -160 - 3150 rpm -80 - 1580 rpm -38 - 775 rpm -20 - 385 rpm Weight: 6,5 tn Electrical connection: 17 kW Year of manufacturing: 1991

CALIBRATING MACHINE Mod. SAC SUERI CLS 1150 max. working width mm.1150 1 tape: roller diam. mm.300 Engine power hp 20

Supply-Cassette for Avantra25 - see all details in the picture. The Cassette is out of a well working Avantra25. Available: on stock

Powersupply for AccuSet - see all details in the picture. The Powersupply is tested and is out of a well working AccuSet. Available: on stock

Supply-Cassette for all AccuSets - see all details in the picture. The Cassette is tested and is out of a well working AccuSet. Available: on stock

Supply-Motor for AccuSet, it is the complete unit for an easy change - see all details in the picture. The Motor is tested and is out of a well working AccuSet. Available: on stock

AGFA Powersupply for Avantra 36 and Avantra 44 Available: now

Complete brewery brewhouse 500 l / 6 fermentation tanks

Picker SureView M2 with: Tube M-147 0.1/0.3 Bucky 18x24 and 24x30 Without radiation protection wall complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into ...

Producer: Suhner Description: - Capacity- 2000l - Brand new microprocesor Mikster MCM 023 - Variable drum speed - Automatic control - Variable pressure level - Pressure measurement; 0-99 % - Manual work mode - 50 programs easy to change - 6 cycles to one program, max cycle time 100h, two phases on cycle - Total time one phase 99 minutes - Brand new inverter Lenze Section responsible for vacuum; - Vacuum pump Busch 36m3 /h - Vacuum valves Danfoss - Total power 5.5 KW ( main motor 4KW + pump 1,5 KW ) - Total weigth 1500 kg - Fully made of stainless steel

Qty. 1 Second-hand cold rolling mill Mfc.: SUNDWIG/MINO Type: 4-HI Built: 1980 Revamped: 2016 Rolled material: Carbon steel SAE1006, S235-S550, C45-C75, IF Strip width max.: 600 mm Thickness: in 6.0 mm out 0.25 – 5.0 mm Speed max.: 500 m/min Coil size: ID 508 mm OD 2000 mm Back-up roll dia.: 590 mm - 625 mm Work roll dia.: 190 mm - 240 mm Motors stands: DC, EAA converters (installed 2004), Rolling force: 500 Tons Coolant Emulsion Filtration by magnetic system Controls PLC system: SIEMENS Scada: Simplicity Thickness control: Entry stand hydraulic equipped with Automatic Gap Control (AGC) Thickness control: Exit stand Utilities: Electrical voltage: 380 V, 3 Phase, 50 Hz Air pressure: 5 Bar Cooling water No. of work rolls: 120 used + 8 brand new No. of back-up rolls: 8 Electric Drawings Mechanical Drawings Certification: Allegato V/8 ...

5 hl brewhouse newly

Sugden Engineering Twin propeller Mixing Vessel. 200 L Stainless vessel, 2 top mounted paddle stirrers, Vessel 45 degree sloped base to outlet.

Distance between centers: 4500mm. Swing: 825mm. Swing over carriage: 600mm. Swing over gap: 1250mm. Spindle: 80mm. 16 speeds (9-500rpm) Equipped with chuck of 500mm. Equipped with conical device.

Qty. 2 Second-hand pickling lines Mfc.: Sundwig Built: 1968 Tank of clean HCl: 50 m³ Tank for dirty HCl: 50 m³ Strip width: 1525 mm Qty. 3 Tanks interconnected one for each bath 310 m³ Qty. 3 Baths HCl 152.5 m Double bath pre-washing water Bath for final water washing Heater Chimney for taking out the acid vapors Acid pumps Auxiliary pumps Leveling machine Mfc.: AEG-EMG Built: Oiling machine Mfc.: Sundwig Built: Coiler Mfc.: Sundwig Built:

Cooling tray type KW 1000-200-200 self-sufficient for strand cooling in the production of granules or filaments. - a mobile and height-adjustable base frame made of welded steel raw, left machine version, painted - Frame-height adjustment of the top edge of the water bath from 900 mm to 1050 mm - a VA cooling tray 1000x200x200mm - 2 pieces adjustable and mounted strand holder - clamped to water edge - 1 piece wiper bled for partial strand drying - 1 piece of adjustable tub plug for filling height adjustment - 1 piece of VA water tank (reservoir) as service water tank - 1 piece of bacon water pressure pump to supply the cooling tank with sufficient cooling water from the water tank - 1 piece of direct 1/2" fresh water connection via float switch and solenoid valve for connection to the customer's side Fresh water network - Tub overflow - drain pipe DN50 for connection to  ...

1 VOLLENWEIDER cleaning and shearing machine type SUPER DUPLO, width 210 cm

Offer via gebr. flexible shaft grinding machine SUHNER type Rotomax 3.5   - Lightweight and compact design - Stable high-performance motor and infinitely variable torque adjustment - Wide range of shafts and tools - Control from the handpiece by optional manual shutdown   Three-phase motor for 3-phase alternating current Protection class IP 44 Overload Power consumption 3.5 kW Voltage 400 V, 50 Hz Idle speeds Connection DIN 15: 500-10,000 min-1 Anschluss ‪DIN 10‬: 500–25.000 min–1 Speeds infinitely adjustable Mobile   Applications: Grinding, cutting, roughing, rusting, polishing, brushes, etc. For heavy work in foundries, in boiler and steel construction, in mechanical Workshops, stainless steel processing plants

Contact manometer NG100 0-4 bar

Kilia Supreme Cut 200 ltr., 200 liters bowl cutter, bowl and bowl-cover stainless steel, year of manufacture 2011, hydraulic noise reduction cover, knife shaft brake electrically operated, separate stainless steel electric control cabinet, membrane keyboard, variable bowl speed, variable knife speed, variable mixing speed forwards and reverse, cleaning system, knife head with 6 knifes, hydraulic loading device for 200 liter bins, hydraulic unloader. You are very welcome to inspect and test the machine.

The SteriWasher is an innovative new robust, high-performance, validateable part washing system designed for use in pharmaceuticals, biotechnology, food, beverages, healthcare and other critical areas. The washroom is accessible via a robust wing door and is made of 316 stainless steel. It is hygienically constructed. By using a combination of specially developed spraying technologies with variable performance, the washing machine offers energy-rich washing along with an energy-saving rinse, which is selected by a simple recipe selection. Description The SteriWasher ™ parts washers use existing and new technologies to provide an environmentally friendly washing system with low water and energy consumption in production and research environments for equipment ranging from critical small parts and tools to large mixers, barrels and containers. The range is available with a range of c ...

11xNUMMERATORS

MADO MSM 764 SUPRA 50 M, 50 Liters bowl cutter, 2 knife speeds, mixing speed forward and reverse, 2 bowl speeds. You are very welcome to test the machine in our facility in Koblenz, Germany.

Qty. 1 Second-hand carousel baitec painting line Mfc.: Nordson Type: Sure Coat Built: 2002 Capacity: 150profiles/h Max. profile length: 7.0 m Qty. 10 electrostatic guns Capacity: 5 profiles inside oven

1 SUPERBA steaming and shrinking machine type UNIVAP year 2001 machine runs 10 independent conveyor bands through one central steaming chamber never commissined (0 running hours)

Centrifugal deposition Hydro Zyclone Liquid Particle Separator Hydro Cyclean HC5/HCH5 used Hydrocyclone Gravity-Water-Particle Separator Cyclone Water filter Water cleaner Watercleaner For separating heavier, larger particles in liquids or sludges. Was used to separate particles from washed-up pappier & cardboard solids. Price per pc3 3 x available Manufacturer: SULZER-ESCHER WYSS GmbH Type: HC5-TB5B.40 Y.O.M.: 1993 Main pipes dN400 1x Masch.Nr: 11835 (EQ.Nr 11GE01/1st stage) 1x Masch.Nr: 11837 (EQ.Nr 11GE01/1st stage) 1x Masch.Nr: 11836 (EQ.Nr 11GE01/1st stage) 1x available Manufacturer: SULZER-ESCHER WYSS GmbH Type: HC5-TB6B.48 Y.O.M.: 1993 Main pipes dN400 1x Masch.Nr: 11835 (EQ.Nr 11GE02/2nd stage) Cyclone & Distribution Material: Plastic Frame & Pipe Material: Stainless Steel Size Total approx.: 6200 x 1100 x 2800 mm Weight each approx.: 2.5 to T ...

1 used Nordson order head, type Mini Blue II SureBead, 230V / 100W, with solenoid valve and 40-degree connection, built in 2013. 10 pcs. available (intermediate sale reserved).

MULTI MOULDERS machine with 7 shafts type SCM SUPERSET 23 PLUS . with SLIDE and RETURN PIECES type MAHROS RP/4 second hand machine CE mark : Yes volt. 380/50 - Composition (7 shafts , 7 independent engines): 1° shaft : lower horiz . motor power Hp 7,5 2° shaft : right vertical . motor power Hp 7,5 3° shaft: left vertical (automatic). motor power Hp 7,5 4° shaft : upper horiz. motor power Hp 10 5° shaft : upper horiz. motor power Hp 10 6° shaft : lower horiz. motor power Hp 7,5 7° shaft : universal 360° . motor power Hp 10 grove table inlet length mm. 2400 feed speed: from 5 to 35 mt./min max. useful working width mm. 230 max. useful working height mm. 120 shaft diameter mm.40 automatic lubrication system weight kgs. 4300

Dear's Sale, Sulzer 40/48 engine parts Piston head full.. 2 pcs conrod 1 pc piston ... 2 pcs Ready for transport Best Regards Hakan KUSCU info@kscege.com