strom aggregat used for sale

Coloricon: MOELLER Types: MT-SK II and OFN 2/850 DZSH Price on request Contact data can be found under Contact

Saw blade feed pneumatic Motor power 7.5 KW Cross-section max. 280 x 135 mm, or 360 x 55 mm complete with: 1 mtr each Work table to the left and right of the saw blade bevelled sheet metal behind saw cut for drainage of Trimming cuts 2-hand control device Front saw blade protection HM saw blade Optionally available: Pneumatic front guard (TR501/P) Upper protective device cutting range (TR501/G) zus. Roller table per mtr. (with roll 60 mm) manual stop 60 mm manual stop 250 mm pneumatic stop 60 mm pneumatic stop 330 mm HM saw blade Laser directional light 220 V

TR 450 MATRIX cross-cut system with automatic cutting cycle by input on the control panel or by cutting list Input material: Single or stacking material with fixed length Applications: Production of pallets, packaging, furniture and garden furniture Cross-section: mm 25x330, 40x310, 60x290, 85x277, 95x265 Min. workpiece thickness 10 mm (with automatic loader 20 mm) Work table inclined 8° Technical characteristics of the sawing unit: Pneumatic sawing unit TR450 Engine power 5.5 hp (4 kW) HM saw blade diam.450 mm., F=30 Z=72 S=4.2 Technical characteristics of the feed system: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT Feed by rack and pinion system and brushless motor Positioning accuracy +/- 0.4 mm Powerful feed motor for a package weight of 80 kg Maximum feed speed 90 m/min Pneumatic lifting of the slider at the end of the cutting cycle and overhead ret ...

I sell an automatic CNC machining center for BLOCK-HOUSE manufacturing Stromab Autoblox. Year of construction 2011. New machine. Cutting saw 600mm / 7,5kW Dubel drilling unit up to dia.35mm x depth up to 320mm Pin milling machine up to dia.230mm / 4kW Horizontal milling machine up to dia.230mm / 4kW Vertical milling machine up to dia.180mm / 4kW Automatic feed system +-1mm Good for the timber construction structures! Available the same.

Cutting cycle: Defect caps by chalk marking cutting with fixed lengths, Standard and sequential cutting, sequential cutting in markup mode. Infeed material: variable lengths for single piece loading WS.1 Continuous cross-cut saw 4 pcs. lower feed rollers 1 pcs. loading table 2 mt. Right with double marking table 1 pcs. outlet table 1 mtr. with rear stop Height of the rollers manually adjusted 12 pieces of luminescence chalk Cutting capacity: P. A: 130 x 175 mm, 120 x 200 mm, 100 x 230 mm, 85 x 250 mm, 15 x 305 mm Item B: 100 x 290 mm, 80 x 315 mm, 50 x 340 mm, 30 x 355 mm, 15 x 365 mm Control with: Color touch screen 7" Machining of cutting cycles directly on the machine Programming variants: - Defect caps by marking - Working with cutting list consists of 10 dimensions, possibility of repetition for any measure and total quantity of each measure 100 memory lo ...

miter square horizontal: +60° / 0° / -45°; miter square vertical: 0° / +45°; cutting hight at 0°: 200 mm; cutting height at 15 °: 190 mm; cutting height at 45°: 115 mm; cutting performance at 0°: 525 mm; cutting performance at 60°: 270 mm; cutting performance at 45°: 370 mm; saw blade diameter: 550 mm; diameter spindle: 30 mm; speed: 2800 U/min; motor power: 4 kW; motor brake: yes, automatically; suction connection: 150 mm; weight: 315 kg; • Aluminium arm • Precision linear guides made of hardened steel • Rotation and tilt from the front of the machine • Emergency stop

Pressing area: 3000 mm x 1800 mm; Number of manual hydraulic cylinders vertical: 3; Number of manual hydraulic cylinders horizontal: 2; Pressing pressure: 1500 kg; Machine length: 4000 mm; Machine width: 750 mm; Machine height: 2250 mm; Chassis on wheels, two of which steered Manual hydraulic cylinders height adjustable Vertical sliding posts

Pressing area: 3000 mm x 1800 mm; Design: Wall mounting; Number of manual hydraulic cylinders: 3; Pressing pressure: 1500 kg; Cylinder stroke: 60 mm; Hold-down: 1; Machine Length: Machine Width: Machine height:

AUTOMATIC CUT-OFF SAW model STROMAB TR 600 second hand machine in excellent working conditions CE regulation : YES machine suitable for cutting wooden boards, packaging, windows/doors frames , furniture , pallets, garden furniture and various equipment: hydraulic saw blade movement safety 2 hand operation machine according to CE norm brake motor safety fence on worktable working table mm.3000 on right side from saw blade with idle rollers diam.mm.90 working table mm.2000 on left side of saw blade with idle rollers diam.mm.90 n.1 saw blade diam. mm. 600 n.3 side stopper on fence right side of the saw blade technical data: motor power saw blade Hp 12 / Kw 9 motor power hydraulic unit Hp 1,5 / Kw 1,1 saw blade diam. mm.600 speed saw spindle rpm 3000 working hight over ground floor 850 mm working pressure 8 bar weight 450 kg

Sell Stromab oleo-pneumatic saw PS 600 P with infeed and outfeed roller benches year 1999 motor 7,5kW Blade diameter 600mm Capacity : Ht 210mm 90 cut : 450mm/ 45 cut : 320mm Power supply : 380 V + 6 bar compressed air (for the presser and the automatic feed) weight : 700kg no delivery - to be collected

equipped with APS electronic digital position sensor

Code: 0168 Brand: STROMAB Model: ST 3000 - CE Standard Rotating pneumatic clamping machine, suitable for planks in general, squared timbers, strips for forming panels, table tops, steps for stairs and coffin - CE Standard Motorized rotation with release pedal and handy control wheel for worktable rotation Working capacity 3000 x 1200 mm Nr. 9 pneumatic front pressers ( 3 each side) Nr. 18 vertical columns with cylinder, diameter 80 mm ( 6 each side) Nr. 3 Working stations Thrust of vertical cylinder 8 bar kg 400 Daily output (8 hours) m2 263 Mechanical safety barriers Overall dimensions : mm 4800 x 2850 x 2300 Weight kg 1100

Brake for hydraulic motor, hydraulic motor, oil motor, hydraulic pump, multi-disc spring-loaded brake, multi-disc spring-loaded brake -Manufacturer: Stromag, hydraulic multi-disc spring-loaded brake -Output shaft conical: Ø 45 - 40 mm -Input shaft bore: Ø3 2 mm -universally applicable -Number: 11x brakes available -Price per piece -Dimensions: 220/190 mm -Weight: 16kg/pcs

AVAILABILITY FROM FEBRUARY 2024 STROMAB pendulum saw model PS/50FP with: - Pneumatic head movement - blade D=500mm - 7.5 HP engine - with roller benches Machine not compliant with CE regulations

Brake for hydraulic motor, hydraulic motor, oil motor, hydraulic pump, multi-disc spring-loaded brake, multi-disc spring-loaded brake -Manufacturer: Stromag, fluid-switched multi-plate spring-loaded brake from the GSL aerial work platform -Bolt circle: Ø 160 mm M14 -Dimensions: see photos -universally applicable -Number: 2x brakes available -Price per piece -Dimensions: 220/190/H190 mm -Weight: 19kg/pcs

Limit switches, buttons, safety switches, position switches, spur gear limit switches -Manufacturer: Stromag, spur gear limit switch series 100 -Type: 3.98 NE-684 F -Voltage: 230 V 1.5 A -Shaft: Ø 10 x 20 mm -Protection class: IP54 -Price: per piece -Number: 2x available -Dimensions: 235/130/H140 mm -Weight: 2.5 kg

Rubber disc coupling, claw coupling, connecting coupling, torsionally flexible coupling -Manufacturer: Stromag-Periflex -Type: PS 34-2 -V.-No.: 467/1 -Ident No.: 699070500 -Outer diameter: 337 mm -Inside diameter: 103 mm -Pitch circle outside: 315 mm -Hole circle inside: 138 mm -Number: 12x clutch discs available -Price: per piece -Dimensions: 337/337/H41 mm -Weight: 2.5 kg

Machining center for cutting large beams with 5 axes electronically controlled Maximum height of beam to be cut 300 mm Minimum width of beam to be cut longitudinally 100 mm Sliding table transversal travel 600 mm Swivel surface rotation degrees from 0 to 345° Circular blade dimensions 800 mm Blade motor power HP 20 Maximum working width 650 mm Beam moving system with motorized rubber wheels and pneumatic upper pressers Roller benches of 5500 mm both in entry and exit

Stromab SL1 block press Working length max 3000mm Working height max 1300mm Maximum width of glued material 150mm Press divided into 2 sections Number of vertical cylinders 6 Number of frontal clamps: 1 pneumatic Vertical cylinder stroke 150mm Maximum operating pressure 180 bar CE Certified Weight 850kg Dimensions of the press 3450x1050x2400mm Year of production 2004

General SKU246N192 LocationBarneveld MakeStrommen AK Randers Danmark No.M344.05 Main Features MaterialStainless steel Volume1000 Ltr. Motor3.6 KW Specified Features - Z-blade mixer Z-blade mixercheck Capacity1000 Ltr Trough sizes1200x1150x900mm With covercheck With jacketcheck Single gearedcheck With adjustable packing glandscheck Motor3,6 KW, 380 Volt Hydraulic tiltingcheck MaterialStainless steel Information Mounted on framecheck With switchcheck Floorspace2,9x2,2 M Total height2,1 M Weight1750 KGMinerals & inorganicPlastic & polymersDyes & pigmentsSolid pharmaceuticsOther feedRubberZ-blade mixersAnimal feedLubricants & oleoOther chemicalStarchSugarCosmeticsOther pharmaceuticsDetergent & surf.Powdered foodsPaints & coatingsPaper & otherFeed additivesOils & fatCatalysts & fillersStrommenIndustries > Chemical > Minerals & inorganicIndustries > Chemical > Plastic ...

SECOND-HAND VERTICAL HYDRAULIC CLAMP FOR WOOD PANELS STROMAB MOD. SL1 - CE RULES - volt. 400/50 - year 2009 - 3000x1300mm

Code: 0133 Brand: STROMAB Model: PS/50 F - CE Standard Manual pendulum saw for cutting boards, wood packaging, furniture, window frames and various - CE Standard Technical data: Blade diameter mm 500 F30 Blade speed rpm 2800 Motor Hp 7,5 Cutting capacity mm 510 Cutting depth mm 145 Manual feed Suction mouth diameter mm 150 Infeed roller table mm 1500 Outfeed roller table mm 1500 Weight kg 350

Code: 0254 Brand: STROMAB Model: CT 800 - CE Standard Cutting centre for beams, wood carpentry, wooden roofs, sawmill, balconies, and various - CE Standard CE Standard Technical data Blade diameter mm 800 Motor power Hp 20 N° 5 axis controlled by programmer : Saw table rotation ( 0-340°) - Speed of the saw table rotation 9 sec. each 180° - Blade beveling from 90° to 45° (speed of the blade beveling 20 sec.) - Height of the blade above the table ( speed 15 sec. each 10 cm) - Beam positioning and measuring ( speed 17 mt/min) - Motorized positioning of the saw table compared to the saw fence mm 600 Photocell for the automatic reading of workpiece beginning Cutting capacity at 90° with single stroke: mm 280 x 290 / 250 x 390 / 200 x 450 At 90° with saw table sliding and repeted cut mm 280 x 770 / 250 x 840 At 45° with single stroke mm 200 x 210 At 45° with  ...

AUTOMATIC CUTTING SAW machine model STROMAB PS 45 for solid wood, wooden packaging, furniture and others second hand machine with automatic movement of unit volt. 380/50 roller conveyor of mt. 2 to the right of the blade roller conveyor of mt. 2 to the left of the blade technical details : motor power Hp 5,5 blade diameter mm.450 blade hole diameter mm.30 Blade Speed RPM 2800 cut-off capacity mm 510 x 130 (H) net weight Kg.600

AEG Power straightener MINISEMI 380/160

Units for painting booth with heat recovery Make, Type : Wolf, WLE-S 230 Built: 1998 Supply air unit: 21,200 m3/h; 7.5 kW; 1028 rpm Exhaust unit: 21,000 m3/h; 7.5 kW; 1028 rpm Heating unit: 209 kW Brenner : Gasbrener Dry temperature: max. 80 degrees C Heat recovery: cross-current heat exchanger (max. 50% energy saving) Blow-in hood : 90O-bow, blow-in hood in the supply air cover Dimensions: 1.5 m x 4.5 m x 3.8 m (approx. WxLxH) Electrics : Control cabinet Other : Supply and exhaust air pipes, deflector hood and Exhaust fireplace on request Location : Nuremberg Warehouse Sell price: € 6,995,- net, from location in Nuremberg, Plant is already dismantled ! This plant has already been sold. However, we have similar plants in stock. Please ask. We also have complete painting booths, drying booths and spare parts for painting systems in  ...

orschubaggregate suitable as spare part for COOK + COOK BOLINDERS + MECOUTIL

Milling / Beveling aggregate Serial No.: IMA -for double-sided edge banding machine (1 Unit left right side page / 1 units)

Hydraulic Unit 30 l, 60 l / min, 200 BAR, with tray and solenoid valves, electric motor three-phase 0.75 kW More information at 0170 / 2204056 Mail to fa.raupp@t-online

Hydraulic unit incl. wiring diagram Manufacturer: Aros Hydraulik GmbH Type: HE160-Z21/V5, 5-VAD22/V5, 5-B3/120-LV6P-so. Engines: Manufacturer: Asea motor Type: MBT 132s Power: 5.5 kW Frequency: 3 ~ / 50 Hz Manufacturer: Dietz-motoren GmbH & co. KG Type: 4001540 441883 Power: 5.5 kW Voltage: 380 V Current strength: 11,8 A Valve block: Manufacturer: Lenze Type: 14 128 10 1 0 S 0 Pump: Manufacturer: Sauer / Daikin Type: J V15SA4CRX85 Maximum pressure: 250 bar Filter: Manufacturer: Argo filter Type: HD 046 056 Capacity: 35 l / min Pressure: 210 bar max. New price: approx. 7900

2 units Wartsila gas engines Model W16V34SG Make Wartsila, Finland Installation date G3 - 31/03/2011 & G4 - 26/03/2011 Rated output (kW) 6375 Rated speed (RPM) 750 Number of cylinder 16 Nos. Swept volume via cylinder(dm3) 36.3 Compression ratio 12:01 Mean effective pressure (bar) 19.8 Mean piston speed (m/sec.) 10 Cylinder bore X stroke (mm) 340 X 400 Cycle stroke four stroke Starting system compressed air (30 kg/cm2) Supercharging system exhaust gas turbocharger Lubrication forced lubrication (engine driven pump) Fuel natural gas Configuration V type Generator make AVK Generator nominal output (kVA) 7968 Voltage (kV) 6.6 Frequency (Hz) 50 Power factor 0.8 Operating hours 13,500 each since installation in 2011.

Offer Used power generation aggregate D 250-4 IWE according to ISO 8523 of Kirsch, BJ 2003, Executive class according to ISO 8528 â 1: Application by 6280-13:2/A4 VDE 0108 Nominal power: PRP 200 kW, nominal voltage: 400 V, nominal current: 361 A, Nominal frequency: 50 Hz, nominal speed 1500 min-1 New price: From â?¬87,130.00 (net) engine: Manufacturer IVEV, No. 594641 Type: GE 82010 Sri 25.01 Power 221, 0 kW, speed: 1500 min-1, cooling system water Generator: Manufacturer Leroy Somer, 1st 150375/1 Power: 315 kVA, voltage 400 V, 3 â 50 Hz Engine hours: 47.57 h Aggregate: Manufacturer: Cherry, No: 4293 Type: D 250-4 IWE The buyer must expertly mine and pick up the plant himself and at his own expense.

A Jenbacher gas BHKW is sold here. MotorLoeistung: 620 kW Year of construction: 1996 More information will follow... +49(0)1773879144 With kind regards Subscriptions

Aggregate screening line. Year of production (installation) - 2004 Installation capacity - 4 t / h Grain size of the screened material 0 - 6mm The line includes: 1. Storage silo - 20 tons 2. Raw material hopper 3. Vertical bucket conveyor PK-250-200 / 9200 - manufacturer WAKRO Sp. Z o.o 4. Vertical bucket conveyor PK-250-200 / 8000 - manufacturer WAKRO Sp. Z o.o 5. PKS-200/4200 screw conveyor - manufacturer WAKRO Sp. Z o.o 6. PKS-200/2800 screw conveyor - manufacturer WAKRO Sp. Z o.o 7. PKS-250/2515 screw conveyor - manufacturer WAKRO Sp. Z o.o 8. PKS-250/5300 screw conveyor - manufacturer WAKRO Sp. Z o.o 9. Ball mill 10. Air filter FPK-23/25 - manufacturer WAKRO Sp.z o.o 11. The PWL2-1 / 2,2-Ew2 linear vibrating screen - producer NOWET Sp.z o.o

Iveco emergency generator 190 kVA + + NEW - Year of construction 2022 + + - - - - - Engine: - Iveco (Italy) - 6 cylinders - Diesel - Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Leroy & Somer (France) - 180 / 200 kVA - 230 / 400 volts - 50 Hertz - AVR controller - - - - - Control / Start Unit: - Digital start unit - with automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Engine monitoring - Operating hours counter - Maintenance timer - integrated battery charging function - - - - - Other data: - Dimensions: 335 x 116 cm - Weight: 1980 kg - Tank volume: 400 liters - Sound level: approx. 67 dB (7m) - Consumption: 18.6 l/h (50%) / 27.9 l/h (75%) - - - - - Scope of delivery: - Iveco generator set 175 / 192 kVA - in soundproofed housing - with digital control - integrated frame tank - Battery -  ...

Yanmar Diesel Generator Set 16 kVA - NEW + + E-Start - AVR - Water Cooled + + - - - - - Engine: - Manufacturer: Yanmar (Italy) - Model: 3TNV70 - 2 cylinders - Diesel - Water-cooled - Power: 22 hp - 872 cc - - - - - Generator: - Manufacturer: Linz (Italy) - 16 kVA - 230 / 400 volts - 50 Hertz - AVR controller (+/- 1%) - - - - Equipment: - Electric start - AVR controller - 1x 400V 32A socket - incl. hedging - Key start - Voltmeter + phase selector switch - Hertz display - Operating hours counter - Emergency stop switch - - - - - Engine control unit: Shutdown / alarm in the event of the following events: - Fuel reserve - Engine temperature too high - Oil pressure too low - Battery voltage not i.O. - Tear from the V-belt - Overspeed / Underspeed - - - - - Other data: - Dimensions: 130 x 70 cm - Weight: 485 kg - Consumption: 3.1 lt ...

Kohler Diesel Generator Set 20 / 22 - NEW E-Start - AVR - 230 / 400 Volt - soundproofed - - - - - Engine: - Manufacturer: Kohler (Italy) - 2 cylinders - Diesel - Air-cooled - Power: 26 hp - 1248 cc - - - - - Generator: - Manufacturer: Linz (Italy) - 20 / 22 kVA - 230 / 400 volts - 50 Hertz - AVR controller (+/- 1%) - - - - Equipment: - Electric start - AVR controller - 1x 230V 32A socket - 1x 400V 32A socket - incl. hedging - Key start - Voltmeter + phase selector switch - Hertz display - Operating hours counter - Emergency stop switch - - - - - Engine control unit: Shutdown / alarm in the event of the following events: - Fuel reserve - Engine temperature too high - Oil pressure too low - Battery voltage not i.O. - Tear from the V-belt - Overspeed / Underspeed - - - - - Other data: - Dimensions: 140 x 70 cm - Weight: 450 kg  ...

Kohler Diesel Generator Set 20 / 22 kVA - NEW E-Start - AVR - 230 / 400 Volt - - - - - Engine: - Manufacturer: Kohler (Italy) - 2 cylinders - Diesel - Air-cooled - Power: 26 hp - 1248 cc - - - - - Generator: - Manufacturer: Linz (Italy) - 20 / 22 kVA - 230 / 400 volts - 50 Hertz - - - - Equipment: - Electric start - AVR controller - 1x 230V 16A socket - 1x 400V 32A socket - incl. hedging - Key start - Voltmeter - Ammeter - Hertz display - Operating hours counter - Low oil pressure warning light - - - - - Other data: - Dimensions: 120 x 62 cm - Weight: 271 kg - Consumption: 4.0 ltr. / h (75%) - - - - - Scope of delivery: - Kohler Diesel Generator Set 20 KVA - with electric start - Start unit - Tank - Exhaust - Battery - Sockets - - - - - Transport: - A Germany-wide transport including unloading by truck with lifting pl ...

Iveco emergency generator 135 kVA + + NEW - Year of construction 2022 + + - - - - - Engine: - Iveco (Italy) - Model: NEF45 - Diesel - Water-cooled - 1500 rpm - - - - - Generator: - Leroy & Somer (France) - 125 / 138 kVA - 230 / 400 volts - 50 Hertz - AVR controller - - - - - Control / Start Unit: - Digital start unit - with automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Engine monitoring - Operating hours counter - Maintenance timer - integrated battery charging function - - - - - Other data: - Dimensions: 267 x 113 cm - Weight: 1470 kg - Tank volume: 290 liters - Sound level: approx. 68 dB (7m) - Consumption: 14.4 l/h (50%) / 20.2 l/h (75%) - - - - - Scope of delivery: - Iveco generator set 125 / 138 kVA - in soundproofed housing - with digital control - Tank - Battery - Exhaust / silencer - - - -  ...

Iveco emergency generator 100 / 110 kVA + + NEW - Year of construction 2022 + + - - - - - Engine: - Iveco (Italy) - Model: NEF45 - 4 cylinders - Diesel - Water-cooled - 1500 rpm - - - - - Generator: - Leroy & Somer (France) - 100 / 110 kVA - 230 / 400 volts - 50 Hertz - AVR controller - - - - - Control / Start Unit: - Digital start unit - with automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Engine monitoring - Operating hours counter - Maintenance timer - integrated battery charging function - - - - - Other data: - Dimensions: 267 x 113 cm - Weight: 1390 kg - Tank volume: 290 liters - Sound level: approx. 66 dB (7m) - Consumption: 12.5 l/h (50%) / 17.6 l/h (75%) - - - - - Other: - An integrated socket package (see pictures) can be ordered for an extra charge - - - - - Scope of delivery: - Iveco gener ...

Yanmar Diesel Generator Set 7 kVA E-Start - AVR - 230 / 400 Volt - - - - - Engine: - Manufacturer: Yanmar (Japan) - Model: L100AE - 1 cylinder - Diesel - Air-cooled - Power: 10 hp - - - - - Generator: - Manufacturer: Linz (Italy) - 6 / 7 kVA - 230 / 400 volts - 50 Hertz - - - - Equipment: - Electric start - AVR controller - 1x 230V 16A socket - 1x 400V 16A socket - incl. hedging - Voltmeter - - - - - Other data: - Dimensions: 78 x 57 cm - Weight: 122 kg - Consumption: 1.8 ltr. / h (75%) - - - - - Scope of delivery: - Yanmar diesel generator 6 / 7 KVA - with electric start - Tank - Exhaust - Battery - Sockets - - - - - Transport: - A Germany-wide transport including unloading by truck with lifting platform and pallet truck is possible for an extra charge - Freight price on request - - - - - Price, invoice and payment: ...

Generator set MAN 315VA 7mpm39i2n Type D2866LXE 310 kW with control cabinet

Iveco emergency generator 60 / 66 kVA + + NEW - Year of construction 2022 + + - - - - - Engine: - Iveco (Italy) - 4 cylinders - Diesel - Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Leroy & Somer (France) - 60 / 66 kVA - 230 / 400 volts - 50 Hertz - AVR controller - - - - - Control / Start Unit: - Digital start unit - with automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Engine monitoring - Operating hours counter - Maintenance timer - integrated battery charging function - - - - - Other data: - Dimensions: 220 x 113 cm - Weight: 1170 kg - Tank volume: 240 liters - Sound level: approx. 64 dB (7m) - Consumption: 7.2 l/h (50%) / 10.3 l/h (75%) - - - - - Other: - An integrated socket package (see pictures) can be ordered for an extra charge - - - - - Scope of delivery: - Iveco generator set  ...

Iveco emergency generator 80 / 88 kVA + + NEW - Year of construction 2022 + + - - - - - Engine: - Iveco (Italy) - Model: NEF45 - 4 cylinders - Diesel - Water-cooled - 1500 rpm - - - - - Generator: - Leroy & Somer (France) - 80 / 88 kVA - 230 / 400 volts - 50 Hertz - AVR controller - - - - - Control / Start Unit: - Digital start unit - with automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Engine monitoring - Operating hours counter - Maintenance timer - integrated battery charging function - - - - - Other data: - Dimensions: 267 x 113 cm - Weight: 1340 kg - Tank volume: 290 liters - Sound level: approx. 66 dB (7m) - Consumption: 9.4 l/h (50%) / 14.0 l/h (75%) - - - - - Other: - An integrated socket package (see pictures) can be ordered for an extra charge - - - - - Scope of delivery: - Iveco generator  ...

Diesel generator set 9 kVA - NEW E-Start - AVR - Emission Standard Stage V - - - - - Manufacturer: - CGM, Italy - - - - - Engine: - CGM, 4-stroke, diesel, air-cooled - Displacement: 498 cc - Power: 12 hp - - - - - Generator: - 9 kVA at 400 volts - 7 kVA at 230 volts - Voltage: 230 / 400 Volt - Frequency: 50 Hertz - - - - - Starting unit / control unit: - Ignition lock for starting and stopping - Digital display with monitoring displays, such as .B volts, amps, hertz, kW, operating hours - - - - - Sockets: - 1x 400V 16A - 1x 230V 32A - 1x 230V Schuko - Incl. RCD - - - - - Equipment: - AVR voltage regulators (so even sensitive devices can be operated) - Electric start - Oil deficiency protection (generator set does not start when the oil level is too low) - Overload protection - Automatic start interface (ATS connection) for easy inse ...

Diesel generator set 13 kVA - NEW E-Start - AVR - Emission Standard Stage V - - - - - Manufacturer: - CGM, Italy - - - - - Engine: - CGM, 2-cylinder, diesel - Water-cooled - Displacement: 794 cc - Power: 11.5 kW / 16 hp - - - - - Generator: - 12 / 13.2 KVA at 400 volts - 9 / 9.9 kVA at 230 volts - Voltage: 230 / 400 Volt - Frequency: 50 Hertz - - - - - Starting unit / control unit: - Digital start unit (ComAp InteliLite 9) - Manual start at the push of a button - Automatic start function - Digital display with monitoring displays, such as .B volts, amps, hertz, kW, operating hours - - - - - Sockets: - 1x 400V 16A - 1x 230V 32A - Incl. RCD - - - - - Equipment: - Soundproofed housing - AVR voltage regulators (so even sensitive devices can be operated) - Electric start - Oil deficiency protection (generator set does not start when t ...

Briggs & Stratton Emergency Generator 15 kVA NEW - - - - - Engine - Briggs & Stratton - 2 cylinders - Air-cooled - 627 cm³ - - - - - Generator - Power: 14.5 / 12.5 kW - Voltage: 230 / 400 Volt - Frequency: 50 Hz. - 28.3 amps - - - - - Equipment - Electric start - Manual start by cable pull - Large 45 liter tank - AVR regulator (for exact compliance with the voltage) - Oil level sensor - Overload protection - Sockets: 1x 230 V, 1x 400 V (16A) - Hour display - - - - - Other data - Dimensions: 79 x 58 x 76 cm - Weight: 131 kg - - - - - Price and payment - 2950,- € + 19 % VAT = 3.510,50 € - Payment: Prepayment - A proper invoice with VAT will be created - - - - - Accessories (can be ordered optionally) - Wheelset with push rods - Flexible exhaust hose 2.5 mtr. - Maintenance kit for the first maintenance (consisting of engine oi ...

Briggs & Stratton Emergency Generator 20 kVA NEW - - - - - Engine - Briggs & Stratton - 2 cylinders - Air-cooled - 896 cm³ - - - - - Generator - Power: 19.5 / 17.5 kW - Voltage: 230 / 400 Volt - Frequency: 50 Hz. - 39.1 amps - - - - - Equipment - Electric start - Manual start by cable pull - Large 45 liter tank - AVR regulator (for exact compliance with the voltage) - Oil level sensor - Overload protection - Sockets: 1x 230 V, 1x 400 V (16A) - Hour display - - - - - Other data - Dimensions: 90 x 58 x 89 cm - Weight: 160 kg - - - - - Price and payment - 3650,- € + 19 % VAT = 4343,50 € - Payment: Prepayment - A proper invoice with VAT will be created - - - - - Accessories (can be ordered optionally) - Wheelset with push rods - Flexible exhaust hose 2.5 mtr. - Maintenance kit for the first maintenance (consisting of engine oil ...

New Biogas Generator ready to dispatch