strip used for sale

Qty. 1 Second-hand steel strip production plant The plant consist of below lines: 20-High Sendzimir Mill Mfc.: Waterbury Farrel Built: 1960 Strip width: 330 – 660 mm Thickness Entry: 4.0 mm Exit: 0.076 mm 2-High Temper Pass Mill Mfc.: United Eng. & Foundry Co. Built: 1960 Strip width: 400 – 630 mm Thickness Entry: 1.6 mm Exit: 0.25 mm Tension Leveller Mfc.: TBA Built: 1982 Strip width: 500-1067 mm Thickness: 0.08-0.3 mm Tensile strength: 30-75 kg/mm² Bright Annealing Furnace Mfc.: Salem & Herr Equipment Built: 1960 Strip width: 150 – 610 mm Thickness: 0.254 – 2.7 mm

Qty. 1 Second-hand steel strip production plant Mfc.: NKK, SMS, Bricmont, Siemens, Woo Jin Inc., Kum Soo Ind., Yong Woon Heavy Ind., Affival, Chun Yang, Sumitomo Heavy Ind., Primetals, Toshiba, Sungmyung Eng., Kiheung, Hyundai Steel, Dosan, Kobe, Yaskaawa, IMS, ABB Built: 1995 – 2018 Production plant weight: approx. 50,000 T Slab dimensions: 55 mm x 900~1,560 mm x 20,000~43,000 mm - T x W x L Strip dimensions: 1.4~16 mm x 900~1,560 mm – Coil weight: 28 ton Scope of supply: EAF A EAF B Ladle Furnace Continuous Caster Soaking Pit Descaler Hot Rolling Mill Cooling Unit Coiler Skin Pass Mill Equalizer EAF A Built: 1995 – 2005 Stopped in 2011 EAF B Built: 1995 – 2005 Stopped in 2020 Caster & Rolling Mill Built: 1995 -2005 Stopped in 2020 Capacity (slab) 1.8 MT /annum (A & B combined) Slab dimensions: 55 x 900-1,560 x 20,000-43,000 mm T x W x L  ...

Qty. 1 Second-hand aluminium strip caster – dismantled and in storage Mfc.: Tianzhong, China Built: 2005 Stopped: 2008 Dismantled: 2022, currently in storage Strip width: 1400 mm Thickness: 5 – 10 mm (AL S1000) 5 – 8 mm (AL S3003) Consisting of: Caster roller: 2 x dia. 750 mm x length 1600 mm caster work roll containing support roll chocks Caster shell: 2 x new dia. 820/700 mm x length 1600 mm Shell Alloy: ZTGT-2100 (Upgraded from 32Cr3Mo1V) Surface Hardness: 400-430 HB (43-46 HRC)

Stripe breaking device IMA

Qty. 1 Second-hand Twin-Roll aluminium strip caster Manufacturer: Castal Ltd. Built: Type: MC-410 1350 mm Twin-Roll Aluminum Continuous Strip Caster Cast Strip Width: 1350 mm max 53.15" Cast Strip Thickness Max.: 12.0 mm .472" Min.: 4.2 mm .165" (4.2 mm achieved by production, not just design capacity) Casting Speed: 1050 alloy = 1.5 mton/hr achieved 3003 alloy = 900 kg/hr achieved Caster Configuration Horizontal: 15 degree tilt

Qty. 1 Second-hand Twin-Roll Aluminium Continuous Strip Caster Line General information: ALLOYS: 1xxx, 8011 and 3003 on this caster with good results at the cold rolling mill stage. INSPECTION: The line can be inspected under power. TRIAL CAST: They cannot cast a trial coil. Some movement of the equipment can be seen. ISSUES: The launder lining will need to be replaced (which has to be done when it is moved anyway). The bottom caster roll shell is damaged and needs to be replaced. The good news is that the roll core (the expensive part) is in excellent condition. Mfc.: CASTAL Ltd. Strip width: 1350 mm – 53.15” Strip thickness: max. 12.0 mm – 0.472” min. 4.2 mm – 0.165” achieved! Casting speed: 1050 alloy – 1.5 MT / h achieved 3003 alloy – 900 kg/h achieved Caster configuration: Horizontal – 15 degree tilt

Qty. 1 Second-hand Powder coil coating line on aluminium strip 1500 mm wide Mfc.: TBA Built: 1991 Coating thickness: 60 microns Revamped by OTEFAL in 2003 Powder booth changed in 2011 – GEMA Coil coater for the pre-treatment changed in 2013 Degreasing section re-built in 2010 – OTEFAL Electrical device changed in 2006 Strip width: 800 - 1500 mm Strip thickness: 0.8 – 2.0 mm A wide range of colors - over 300 different shades Capacity: 9000 tons/year in 3 shifts work 5/7 Days so 2 000 000 m² Spool dia.: 508 or 610 mm Outside coil dia.: 1500 mm Average speed: 7.5 m/min.

Qty. 1 Second-hand strip rolling mill plant Mfc.: Gautchi, Pechiney, Spidem, Stein Heurty SA, TECMO-HUNTER, ACHARD, WALDRICH Built: 1971, 1973, 1975 Modernisation in 1991 Strip width: 850 – 1600 mm Thickness Entry: 12 mm Exit: 0.3 mm Consist of: Qty. 2 Strip casting line 4-Hi rolling mill Qty. 2 Homogenisation furnaces Slitter Grinder Qty. 2 Coil cars

Qty. 1 Second-hand steel strip slitter Mfc.: Dai Hyun Built: 1994 Still in operation until end of July 2023 Material to Slit: Hot & cold rolled steel coil, Hot deep galvanized steel, Carbon steel Line Direction: Left to right Strip Width: 1400 mm Thickness: 0.8 - 6.0 mm Max. Coil weight: 24 MT Un-coiler ID with Liner: Ø 480 mm, Ø 600 mm Coil Dia.: Ø 1000 & Ø 2000 mm Re-coiler Inside Dia.: Ø 500 mm, Ø 760 mm Slitting Speed: 50-100 m/min Edging width: 3 mm to 10 mm Electric Power: Input voltage: 400 V, 50 Hz - 220 VAC, 50 Hz,3 Ph. ± l 0% for drive Control Voltage: 110 VAC, 50 Hz, 1 Ph. Slitting capacity Working speed and No. of cuts Min. slit width is 40 mm at thickness 1.0 – 2.5 mm. Strip thickness No. of cuts No. of strips Line speed mm m/min 1.0 - 1.9 16 15 70-90 2.0 - 2.9 14 13 70-80 3.0 – 4.0 12 11 60-70 4.1 – 5.0 7 6 60-70  ...

Qty. 1 Second-hand aluminium strip casting line – stopped in 1/2020 Manufacturer: Shinkwang Type: 2 Roll Casting Built: 2013 Strip Width: 420 - 1,010 mm Strip Thickness: 5∼7 mm Line Speed: 2 m/min (max) Coil Weight: 7,000 kg (max) Power: 45 kW (DC) Cooling Water: 550 m³/h

- Pipe clamp / pipe clamp 12307351 & Strip / strip 12302221 MWM - Suitable for several motors - Please note! Price for pipe clamp and strip. Can also be delivered separately on REQUEST. - 12307351 & 12302221 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting f ...

Data cable with power strip SIEMENS data cable: 6FC9340-2WM length: approx. 1.8 m power strip: 6FC9302-2AG used, tested ! Dimensions ( power strip ): 144 x 72 x 40 mm Dimensions ( packaging ): 300 x 200 x 60 mm

Data cable with power strip SIEMENS data cable: 6FC9340-2WM length: approx. 1.8 m power strip: 6FC9302-2AG with housing and bracket for DIN rail mounting used, tested Dimensions ( power strip ): 147 x 78 x 58 mm Dimensions ( packaging ): 300 x 200 x 60 mm

Power distribution strip, power strip, for installation in 19-rack 1U EATON FlexPDU 8 DIN item number: 3400794300 max. 3650 VA 250 V AC 50 / 60 Hz 16 A 8x Schuko socket (type F, CEE 7/4) Material: aluminium profile, natural anodised approx. 2,0 m connection cable New ! Dimensions ( power strip, without cable ): 483 x 44 x 80 mm Dimensions ( packaging ): 500 x 100 x 100 mm

strip encoder for wet adhesive tape Cyclop Lapomatik; good condition; cleaned and tested; Max. Ready to roll 100mm, min.20mm; Strip length 100-1150mm; Heater for quick drying. Paper tape dispender Cyclop Lapomatik; good condition; cleaned and checked; max.roll width 200mm, min.20mm; Strip Lenght 100-1150mm; heater for fast drying.

QTY.2 ROLL STRIP CASTERS, STRI WIDTH: 1730 MM, THICKNESS: 4.0 - 10.0 MM, QTY: 1 TWIN BELT CASTER, STRIP WIDTH: 1930 MM; THICKNESS: 15.9 - 19.0 MM

1. STRIP WIDTH: 700-1550 MM, THICKNESS: 0.3-3.0 MM 2. STRIP WIDTH: 650 MM, THICKNESS: 0.1 MM 3. FOIL WIDTH: 650 MM, THICKNESS: 0.1 MM 4. FOIL WIDTH: 680 MM, THICKNESS: 0.06 - 0.200 MM 5. FOIL WIDTH: 650-800 MM, THICKNESS: 0.007 - 0.065 MM

Qty. 1 Second-hand strip casting production line Mfc.: EMA-Indutec, Marx, Air Blue, Güntner, Demag, G. Buchholz Built: 1992, 1995, 1997, 1999, 2000 Income material: Scrap Strip width: 300 mm Thickness: 10 – 20 mm – can be reduced! Plate length: 16 m can be extended! Coil weight: 1.5 T (steel) Scope of supply: Induction crucible furnace 20 kV Transfomer Cooling unit Casting machine Duo Mill Stand Coiler Run-out table Quenching Compressor

Roller U-strip, roller conveyor, roller conveyor, 16 pieces PAGUS 2110 x 37 x 34 mm segment length: 1350 mm segment width: 37 mm height: 34 mm Number of rollers: 50 Roll diameter: Ø 25 mm Roll width: 25 mm Pitch: 27 mm Other quantities on request ! used, tested ! Dimensions ( individual rollers U-strip ): 1350 x 37 x 34 mm Dimensions ( packaging ): 1350 x 37 x 34 mm

Roller U-strip, roller conveyor, roller conveyor, 10 pieces PAGUS 2110 x 37 x 34 mm segment length: 2110 mm Segment width: 37 mm height: 34 mm Number of rollers: 78 Roll diameter: Ø 25 mm Roll width: 25 mm Pitch: 27 mm Other quantities on request ! used, tested ! Dimensions ( single rollers U-strip ): 2110 x 37 x 34 mm Dimensions ( packaging ): 2110 x 200 x 100 mm

Power strip, 7 sockets, 2 pieces RITTAL DK 7240.210 ( DK7240.210 ) Art.-No. 7240.210 250 V AC 16 A Material: aluminium profile, natural anodised approx. 2.0 m connection cable with ferrules New ! Dimensions( power strip without cable ): 420 x 45 x 45 mm Dimensions( packaging ): 550 x 95 x 130 mm

Power strip, with mains filter ( line filter ) STEBA, TWIX TYPE: TLF-CH Article number: 19.9136 S 250 V AC 50 / 60 Hz 10 A 5x socket SN 441011 type 13 approx. 2.8 m connection cable with plug SN 441011 type 12 New ! Dimensions ( power strip, without cable ): 490 x 75 x 50 mm Dimensions ( packaging ): 500 x 100 x 80 mm

Description The automatic tax strip labelling machine mod. S75/4 applies the tax strips of various sizes on containers of every kind. The tax strip is applied in the U or L” shape. The machine is equipped with a speed variator, a device for immediate stop in case of block and an automatic device for the height regulation of the container which goes from 160 mm up to 380 mm. We have two identical machines. They have been in use less than 100 hours each and are nearly brand new. Original purchase price 40 000 €/machine.

STRIP-FEEDER   sheet width max.: 210 mm   sheet thickness max.: 6 mm Strip feed unit (without servo) for GKP or MFA 160TStrip thickness: 6 mmStrip width: 210mm. It is recommended to use: DYNABOX 45 MEDIUM gearboxServo motor BECKHOFF AM8543-0E20Resolution 0.1mm

STRIP-FEEDER   sheet width max.: 250 mm   sheet thickness max.: 10 mm Strip feed unit (without servo) for GKP or MFA 250TStrip thickness: 10 mmStrip width: 250mm. It is recommended to use: DYNABOX 90 MEDIUM gearboxServo motor BECKHOFF AM8062-0L20Resolution 0.1mm

Producer: Bizerba Type: S-110 Connection: 230 V Steaker and strip cutter BIZERBA type S-110 -40 round knife -Blade spacing 4 mm Ask for an offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Siebler + Göring 5000/160E vertical four side seal strip packer for effervescent tablets, maximum foil width 160mm, currently fitted with handling and format parts for 20mm diameter tablets. Output up to maximum 150 strokes per minute. Includes a duplex module of ABB Flex-Picker robots for automatically loading an existing cartoning machine infeed (cartoner not included)

Single Slab Reheat Furnace • Type: Walking Beam • Manufacturer: Davy • Capacity: 150 t/h • Inside Refractory Width: 8,35 m • Effective Length: 32,6 m • Slab Thickness: 160 mm • Slab Maximum Length: 7,5 m • Primary Fuel: mixed BFG and COG • Alternate Fuel: N°6 Fuel Oil • Commissioned in 1995 Water Descalers • Primary descaler at slab reheat furnace run out table • Front and back 3 Hi Rougher Mill descalers. • Finishing Mill descaler at run-in table. Water Descaling Pumps • Manufacturer: Union Pump Company • N° of Pumps: Two (one operating, one stand by.) • Power: 5.000 HP (3.730 kW) • Pump Speed: 4.500 rpm • Discharge Pressure: 127 barg (1.840 psig) Rougher Mill • Type: 3 Hi, one stand 22" x 34" x 100" Reversing Mill • Manufactured by Blaw-Knox in 1923. • Ma ...

Technical data: -Clip device -Glass Strip saw blade diameter approx. 300 mm -Pneum.. Material clamping - powered 400 V - Working pressure 7 bar -Air consumption per operation approx. 1.6 L / stroke -with: - Removal - roller conveyor with controlled positioning - level stop 3000 mm -Feed - roller 3000 mm - e - foot switch - regulator - space about B 4200 x H 1700 X 900 mm -Weight approx. 600 kg

Qty. 1 Second-hand strip stretching and degreasing line Mfc.: Lenze / Eisenmann / Fröhling / Redex Built: 1986 Functions: trimming / stretching / rewinding / chemical degreasing / middle cut Max. production speed: 120 m/min Width: 600 – 1600 mm Thickness: 60 -500 µm Unwinding dimensions: max. 6.2 t / max. Ø 1700 mm Unwinding tension: 0.5 – 10 kN Spools: Q1, M70, Q3, Steel & cardboard sleeve, Rewinding dimensions: max. 3.1 t / max. Ø 1200 mm Rewinder tension: 0.5 – 10 kN Winder DC Engine Speed: 120 m/min Spools: Q1, M70, Q3 Stretching level: 0.1 – 2.8 Stretching force: 0 – 120 kN Annual capacity 8800 t/a (19 Shifts/week) Required space: Approx. 700 m² Operation direction From right to left (for the complete machine)

Bizerba strip cutter, type: S 111 PLUS, number: 2181028, year of construction: 2004, 230 V, 1 Ph, 50 Hz, 2.7 A, distance between knives: 8 mm, dimensions: 400 mm x 350 mm x 480 mm. With 2 extra knife sets, distance between knives: 4 mm and 5 mm.

1,800,000 TPY Mini mill for slab and hot rolled coil Tonnage per year 1,800,000 tons Type Slab + Strip in Coils Manufacturer SMS Caster type Curved and Straight Material size (Slab size): 55mmT x 900~1,560mmW x 20,000~43,000mmL 210mmT x 600~1,890mmW x37,790mmL Rolling Mills 4 Hi 6 Stands -Product size(coil): 1.4~16mmT x 900~1,560mmW - 28ton/roll And more machinery Please refer to the attached flyer for more details

Nail strips, strip nails PASLODE 3,8 x 121 0113121 approx. 2800 pcs (2 boxes) New ! suitable nailer W117 ! Dimensions: 290 x 250 x 270 mm

Strip Brush MINK BRUSH Flex System FBL1330-K16 Fiber Height: 10mm Fiber Material: Horsehair Fiber Color: Black Body Measurements: Width: 10mm, Height: 23mm Sheet Thickness: 2 - 3mm Body Material: Thermoplastic rubber (TPE/TPV) body color: black length: approx. 20 m New ! Dimensions ( packaging ): 650 x 650 x 40 mm

Valve strip, solenoid valve, distributor valve VOGEL 161 120 032 2x 161 120 019 4-311V-01-10 24 V DC spare part for cylindrical grinding machine NOMOCO VSR5-230-CNC ! New ! Dimensions: 110 x 90 x 125 mm

NH fuse switch-switch strip size 00 RITTAL SV 3592 NH-La-Lei Gr.00 500 V AC 125 / 160 A used, tested ! Dimensions: 465 x 50 x 170 mm

used roller strip Make: SSi-Schäfer Rail length: approx. 1600 mm Width: 39 mm overall width: approx. 42 mm Height incl. roller: approx. 36 mm 56 rollers per bar Roll Material: Plastic Roll width: approx. 26 mm Roll diameter: approx. 26 mm Surface: galvanized Price: 8,00 net per piece Shipping up to 10 pieces per package 15,90 EUR gross

used roller strip Make: SSi-Schäfer Rail length: approx. 850 mm Width: 39 mm overall width: approx. 42 mm Height incl. roller: approx. 36 mm 29 rollers per bar Roll Material: Plastic Roll width: approx. 26 mm Roll diameter: approx. 26 mm Surface: galvanized Weight: approx. 1 kg Price: 4,40 EUR net Shipping 11,90 EUR gross up to 10 pieces - Higher quantities in stock - retail sale possible! On request, roller strips can be cut to the desired size

used roller strip Make: SSi-Schäfer Rail length: approx. 1,645 mm Rail width: approx. 42 mm Height incl. roller: approx. 36 mm 58 rollers per bar Roll Material: Plastic Roll width: approx. 26 mm Roll diameter: approx. 26 mm Year of construction: 05/2010 Surface: galvanized Weight: approx. 1.5 kg Price 8 EUR /piece net Shipping 19,90 EUR gross up to 10 pieces per package - Higher quantities in stock - retail sale possible! On request, roller strips can be cut to the desired size

used roller strip Make: SSi-Schäfer Rail length: approx. 2,600 mm Rail width: approx. 42 mm Height incl. roller: approx. 36 mm 91 rollers per bar Roll Material: Plastic Roll width: approx. 26 mm Roll diameter: approx. 26 mm Surface: galvanized Weight: approx. 2 kg Price 12,00 EUR/Stück net Shipping: by forwarding agent on request Higher quantities in stock - retail sale possible! On request, roller strips can be cut to the desired size

BIHLER GRM100 multislide punching and forming machine, Made in Germany. Machine re-engineered in year 2010 originally by Bihler, updated with servo motor, pump, rewired, new control, etc. Equipped with 4x forming slides and 18 ton press station. Gripper feed on right-hand side with straightener. Max width of strip 100 mm. Max wire diameter 10 mm. Standard feed length 250 mm max. Max operating speed 135 strokes per minute approx. Servo motor. Touch screen control. Air clutch. Weight cca. 6000 kg. Power supply 400/480V, 50 Hz. On stock more Bruderer, Schaal, and Mabu high speed presses. Also Ideal flash butt welding machines.

Romaco-Siebler HM1/160 vertical strip packing machine for tablets, 3 lanes, maximum foil width 170 mm, includes format parts for tablets with dimensions of 7.2 x 5.6 x 17.5 mm and 11.4 x 6.31/WR8.5, foil reel core diameter 76 mm, maximum foil reel diameter 450 mm, Siemens SIMATIC S7-300, excellent working condition with only approx. 1600 running hours

Fasson gluer type SFAM 716 with display mounting station Suitable for full, façade, edge or strip gluing. A high gluing and repetition accuracy of the gluing is guaranteed. Suitable for different substrates - such as open formats, die-cut blanks, etc. made of corrugated and solid cardboard, rigid foam boards, etc. • Sheet system by means of drive chains, also for complicated cuts • High register accuracy • Working width: 2,050mm • Output: 1-lane approx. 4-20 cuts/min; 2-lane approx. 8-40 cuts/min • Cutting thickness: approx. 0.5 to 20mm • Sheet control • Easy adjustment and correction of the register via the display, even during production Consists of: Fasson—Banding machine type SFAM 716 Display Workbelt Type 5A/1650 PRESS BELT Type 5/1650_D.4 Assembly station

Streifeneinleger fuer alle Druckmaschinentypen - Strip feeder for all types of printing machines Mediprint STR 4.1 Year 2002 - Serial-No. 11761 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Description: 10 x connector LED strip double color Approx. Onsite Dimension. (l x w x h): 250 x 250 x 250 mm, weight approx.: 0.50 kg kg

Description: 4 x 50 meters RGB - Multicolor waterproof LED strip - SMD 5050 LED - IP65 - with free remote control - voltage 220V - beam angle: 120 degrees - with 1 remote control - usable indoors and outdoors - - lifespan of 30,000 hours. Approx. Onsite Dimension. (l x w x h): 300 x 300 x 600 mm, weight approx.: 30 kg

Description: 4 x LED Strip 25m - Waterproof (IP65) - Two colors Cold White/Blue - Product color: white - Indoor/Outdoor - Suitable for use: indoors and outdoors - IP value: IP65 - Voltage: 220-240V (50/60Hz) - Dimensions/mm: 25 m - LED SMD 2835 - Power: 11W/M - With 1 free plug - light Colors, cold White or Blue - White+Blue together or White+Blue (flickering) - on/off System. Approx. Onsite Dimension. (l x w x h): 250 x 250 x 600 mm, weight approx.: 10 kg

Description: 10 x connector LED strip double color Approx. Onsite Dimension. (l x w x h): 250 x 250 x 250 mm, weight approx.: 0.50 kg kg

Description: 4 x LED Strip 25m - Waterproof (IP65) - Two colors Warm white/Blue - Product color: white - Indoor/Outdoor - Suitable for use: indoors and outdoors - IP value: IP65 - Voltage: 220-240V (50/60Hz) - Dimensions/mm: 25 m - LED SMD 2835 - Power: 11W/M - With free plug - light Colors, Warm white or Blue - Warm white+Blue together or Warm white+Blue (flickering) - on/off System. Approx. Onsite Dimension. (l x w x h): 250 x 250 x 600 mm, weight approx.: 10 kg

Description: 4 x LED Strip 25m - Waterproof (IP65) - Two colors Warm white/ Cold White - Product color: white - Indoor/Outdoor - Suitable for use: indoors and outdoors - IP value: IP65 - Voltage: 220-240V (50/60Hz) - Dimensions/mm: 25 m - LED SMD 2835 - Power: 11W/M - With 1 free plug - light Colors, White or Warm White - White+Warm White together or White+ Warm White (flickering) - on/off System. Approx. Onsite Dimension. (l x w x h): 250 x 205 x 600 mm, weight approx.: 10 kg