straw applicator used for sale

The Tetra Pak Tetra Straw Applicator (TSA 46) has a compact design and is very reliable. Trouble-free operation in a carton filling lines is guaranteed even with long periods of use. It is installed between the filling machine and the packaging machine and has servo motors and inverters. The regulated and controlled application of the straw is thus made possible without any problems. The constant and trouble-free speed of up to 8.000 units/h is ideal for use in conjunction with the Tetra Pak TBA 19 filling machines. Previously used for 200 ml Slim cartons with U-Straw 4. Production hours: 92.204 hours. Including Nordson ProBlue 4 hotmelt unit. MM + SPC + EM Manuals available., Type of Machine: Straw applicator, Capacity: 8.000 pieces per hour, Type of carton: 200 ml Slim, Development step: 10V, Drawing spec.: 678547-0101, Production hours: 92.204 hours, Dimensions: ± 230 x 100 x 210 cm, ...

USED TETRA PAK STRAW APPLICATOR TSA 21 FOR SALE Item #: Usm-192 Category Straw Applicator Used Tetra Pak Straw Applicator for sale Model: TSA 21, Straw Type: U Shape 200ml Slim, Year of manufacturing 2005, working hours 14300

BRAND NEW STRAW APPLICATOR FOR SALE Item #: Usm-206 Category Straw Applicator Brand New Straw applicators available for sale Straw type: U Shape and Telescopic Speed: 3000/6000/7500/9000 PLC: Mitsubishi hotmelt: robotech warranty: one year warranty and spare parts set included

Merer handle applicator type: CM/HA 60 the machine worked in the Tetra Pak line on the 1000 ml SQ Prisma format

Tetra Pak TCAP/21 1000 ml sl ReCap 3 Applicator We offer: Tetra Pak TCAP/21 ReCap 3 Applicator for 1000 ml slim line Tetra Pak beverage cartons, manufacturing year 2004 - in excellent condition - excellent serviced Available from stock Prior sales reserved

Tetra Pak TCAP/21 1000 ml sl ReCap 3 Applicator We offer: Tetra Pak Cap Applicator 21, TCAP/21 ReCap 3 Applicator for 1000 ml slim line Tetra Pak beverage cartons, manufacturing year 2004 - in excellent condition - excellent serviced Available from stock Prior sales reserved

Tetra Pak TCAP/21 1000 ml ReCap 3 Applicator We offer: Tetra Pak TCAP/21 ReCap 3 Applicator for 1000 ml Tetra Pak beverage cartons, manufacturing year 2004 - in very good condition - excellent serviced Available from stock Prior sales reserved

We offer used: Tetra Pak PT 10 Pull Tab Applicator was in operation with a Tetra Pak TBA 8 1500 ml slim line filling machine Year of construction 1997 In very good condition Subject to prior sale

USED TETRA PAK CAP APPLICATOR 30 FLEX FOR SALE Item #: Usm-179 Category Cap Applicator One Used Tetra Pak Cap Applicator 30 Flex For Sale: Flexible cap applicator for portion and family packages of aseptic brick pack product Output: 6600 - 9000 packages per hour Package volume: 200 - 2000 milliliters Package types: Tetra Gemina® Aseptic, Tetra Brik® Aseptic, Tetra Prisma® Aseptic (different package types and sizes may require OEM change parts) Allen-Bradley Logix5561 controls Nordson hot melt glue unit Stainless steel construction Touch screen HMI Servo driven Electrical Information 400/230 Voltage 3 Phase 60 Hertz

USED TETRA PAK CAP APPLICATOR 45 Item #: Usm-191 Category Cap Applicator USED TCAP 45 for 1000ml Prisma Packs is available for sale. Year of manufacturing 2005 and working hours 10532 Condition: Good

The TRE PAK DIM Cap Applicator is a specialized piece of equipment used in the packaging industry for applying caps to various types of containers. Here are some of its key functions and features:, - Automated Cap Application: The DIM Cap Applicator automates the capping process, ensuring that caps are applied quickly and uniformly across a production line. This reduces labor costs and increases efficiency., - Versatility: This machine can handle a variety of cap styles and container shapes, making it suitable for different product lines in food, beverage, pharmaceutical, and cosmetic industries., - Precision Control: The applicator is designed to apply caps with accurate torque settings, which ensures that caps are not over-tightened (which can lead to damage) or under-tightened (which can result in leaks)., - Integration Capability: The DIM Cap Applicator can be seamlessly integrated i ...

For many years, the TCAP 47 was considered one of the preferred closure variants for one-liter packages. However, when using one-liter Slim packs, this closure is disappearing more and more from the manufacturers' ranges. The background to this is the new development of a comfortable closure, which has now more than just established itself on the market. This new HeliCap 23 cannot normally be applied with the existing TCAP 47. However, we are able to convert the existing TCAP 47 for the new HeliCap23 with our workshop team. After that, you can continue to operate your filling line without a PT, which also saves service costs on the PT. Convince yourself of this space-saving and cost-effective alternative to an attractive product format. We will be happy to explain some details to you. Please contact us and let us know your planning wishes together On request, we can provide extensive ...

THROW BAND / SPIN / BELT / DIRECT FROM THE MANUFACTURER! -Stable original cast band / belt / conveyor belt made of rubber, specially designed for baling presses (original quality) or many other applications in industry, agriculture, wood u.v.m.! -New, open reinforced, with mounted hook connectors in stainless steel, 2-ply top Supergrip profile, black, running side out fabric -suitable for CLAAS, Stockey & Schmitz and Welger P22/P23 -Name: EP 3-0 250/2, ceiling -Dimensions: length 2,040 mm x width 300 mm Shipping will be by UPS! On request, we can customize the conveyors / conveyor belts to your individual measurements. (All lengths and widths possible) Endless connection on request. Additional versions, with pimples, Stollen or structured surfaces available. More transport and conveyor belts in all other sizes available immediately . We ship worldwide we deliver worldwide, pl ...

different types: - Straw Shredder KSTAS 7,5kW - Straw Shredder KSTAS 9kW - Straw Shredder KSTAS 11kW electric outlet 400V 50Hz (3 phases) fuse 32 A capacity 6 m³/h dimensions: length 1 225 mm width 785 mm height 1 400 mm weight 220 kg material steel varnished discharge height 550 mm discharge connection diameter Ø 160 mm suitable for all sorts of straw scope of delivery screen 22 mm perforation ; new machine - top condition

Auction-ID: A3-43516-1

- with power take-off drive 540 rpm without universal shaft capacity 6 m³/h dimensions: length 1 225 mm width 785 mm height 1 400 mm weight 220 kg material steel varnished discharge height 550 mm discharge connection diameter Ø 160 mm suitable for all sorts of straw scope of delivery screen 22 mm perforation ; new machine - top condition

New equipment never used A stand will be made for sale Rugged Professional Model Auction-ID: A3-43510-36496

Straw blower trailer trailer with DAF 825 diesel engine and blower Specifications: Engine: DAF 825 diesel engine Engine power: approx. 200 hp Speed: suitable up to approx. 80–90 km/h Braking system: air brakes Suspension: air suspension Features: Hammer mill Conveyor belt for straw bales Blazer Pipe with 3 slewing rings Particularities: Suitable for processing straw bales Mobile version with relatively high transport speed Auction-ID: A1-40135-20

Capacity approximately 2 bales 150cm in diameter; up to 18 meters of ejection; Auction-ID: A1-40135-331

The BL series machines represent the peak of NERI’s production capability in the field of linear labelers and are the culmination of its many years of experience in selfadhesive application. The main features of these series are the particular balcony construction making extremely easy the clearance procedures, the positive transport system of carton in pitch making the machine completely fail-safe, the ergonomics reducing the accessibility in 70 cm only and dividing the machine in three areas: operative, mechanical and electrical. The BL machines can work in-line with other packaging machines, or as free standing units when fitted with required boxes infeed and outfeed devices. STANDARD FEATURES: Labelling machine balcony construction stainless steel executed. Electrical cabinet on machine board. Behind easy access from behind to electrical and mechanical parts; large door  ...

Handle applicator TWIN PACK Power: 40 Pack/min

Nordson 3100V Hot Glue Melt System (For Closing Boxes and Cases) 3100 melter hot glue melt system – for packing process and closing boxes and cases, used in Pharma, Cosmetics, Packaging, Food, Nutrition, FMCG and other industries. Consists of: Melter Control panel Hose Air-operated gun Timer / Pattern controller Driver. Suitable for thermoplastic adhesive or similar material that can be liquified and extruded at temperatures below 218 C (425 _F). Technical Info: The melter has three basic modes of operation: startup, operating, and standby. Each heated component (each hose, each gun, and the tank) is referred to as a zone. The melter liquefies the adhesive, maintains it at the setpoint (operating) temperatures, and pumps it through hoses to dispensing guns. The guns apply the adhesive to the surface of the product or package. The guns may ...

Various models Auction-ID: A1-45411-34

Overview The handle applicator was manufactured by the German company B&W Solutions GmbH in 2014 and until now it was part of a PET filling line for water.  Technical data  Total output: 60 cycles/min one lane length 3660 mm | width 1790 mm | height 2500 mm recommend specifications: Adhesive Strips: Width: 25 mm, Thickness: 78 μm, Adhesion to PE: 30 N/cm², Elongation: max. 40% Paper/Cardboard Strips: Thickness: 180–350 g/m², Width: 20–25 mm (±0.4 mm), Length: 150–240 mm (±0.4 mm)

handle applicator Smipack type: HA80SX Maximum output up to: 80 ppm Working board height: 650-810 mm

Capacity: 70 Tk/h (single track); year: 2009; panel: Simatic Touch Panel; control: S7-300; Power supply: 400 V, 50 Hz, 11kVa; Possibility of mounting handles in one or two ways. Possibility of attaching handles from a magazine or roll. Support for transparent and laminated film. Operator panel menu: DE/PL/ENG. Possibility of individual adjustment of formats to customer needs.

- Output: max. 3000 bts/h - With cork presence control, at the inlet - Cork dust blow-off onto bottle - With caps dispenser - With shrink head - Direction of rotation: left - right - Machine completely overhauled - Machine in very good condition

Main voltage: 400V, 50Hz Air pressure: 5-6 bar

The machine is immediately available and it has few operating hours Technical data - please see the attachment or on our website abc.kahlschlichterle under diverse machines - art.-no. 1354

Zebra110pax4 label printer and pneumatic stamp. RA2315 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status display and buttons on printer, manual control panel on the side and control via PLC I/O Print type: Thermal transfer printing or direct thermal printing selectable Interfaces: Ethernet/control cable Print media: Standard media, tags and RFID media (reading and encoding of RFIF labels) Current label size: 90x36mm, applicator is designed for this size Label length min: 12.7mm Print media width: 16-114mm Ribbon width: 25.4-107mm Ribbon length max: 900m Roll size core diameter: 25.4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) Dot size: 0.125mm x 0.125mm Print speed: 12 inches/second Base area: 700x700mm, with 100mm protruding control panel/compressed air maintenance unit Applicator height: 800mm lower edge Print speed: ...

Lid placing machine, make Laue Engineering, year 2018, used for tin cans with a diameter of 127 mm (dried milk), Slip lid with integrated spoon (10 ml), Consisting of:, can conveyor, for the supply of the cans, feed generation in front of the separation station and transfer of the finished article (can with lid)., execution: Welded frame made of stainless steel with Intralox conveyor belt, drive motor, feed star and goods security, cover conveyor: Feeding of the lids to the lid placer, execution: Welded stainless steel frame with Intralox conveyor belt, drive motor and article surveillance, lid setter: Separation, positioning and joining of cans and lids, return of finished part to can conveyor, execution: Welded frame made of stainless steel with carousel (8 stations), drive motor and goods security and complete cladding; switch cabinet, Destacker: Lid magazine and lid feeding on lid co ...

Related Fillling Machine: A3 Flex, TBA8 square // Output: 7000 U/h

Inv. Num. : 8894 Type: B24-TH300 DX/DW PU Producer: H&H Maschinenbau Created: 2020 Parameters: Weight: 498 kg Equipment: PUVS 280 P melting machine for 20 kg drums of PUR adhesive

Melton hotmelt adhesive appllicating system.

Adhesive label printer and applicator, brand Logopak, type 920 III TE, year 2012, Logopak - Type 920 III TE, year 2012 for printing and applying labels on packaging and pallets,, for labels up to 210 mm width,, Labeling using pressing brush on the stamp diagonally,, with blinds,, Label roll diameter: 400 mm, 76 mm core (150 mm adapter),, Throughput: 15 labels/min. (idle labeling).

Tetra Pak Capper 60 Cap applicator, previously used for Tetra Top 200 and 250 ml Mini cartons with a A5 38 screwcap. This cap applicator was running in combination with a Tetra Pak TT/3 2000 carton filler. The applicator has a small footprint. Number of productions hours: 5.268 h. Applying caps quickly and accurately. The Tetra Pak Capper 60 uses a feeding screw and six torque- and speed-adjustable rotary capping heads to apply caps on stationary packages. Change package heights within the same bottom format in only five minutes. Control panel with Allen-Bradley CompactLogix L36ERM PLC and separate operation panel with Tetra Pak touch screen panel. The production capacity goes up to 4.500 packs per hour. Including collecting vat and elevator (Bonino, Auxiliary Feeder, code nr 56849, date 2018). Including all available manuals and all programs (language in program English and Swedish). Ca ...

Tetra Pak Capper 60 Cap applicator, previously used for Tetra Top 200 and 250 ml Mini cartons with a A5 38 screwcap. This cap applicator was running in combination with a Tetra Pak TT/3 2000 carton filler. The applicator has a small footprint. Number of productions hours: 5.015 h. Applying caps quickly and accurately. The Tetra Pak Capper 60 uses a feeding screw and six torque- and speed-adjustable rotary capping heads to apply caps on stationary packages. Change package heights within the same bottom format in only five minutes. Control panel with Allen-Bradley CompactLogix L36ERM PLC and separate operation panel with Tetra Pak touch screen panel. The production capacity goes up to 4.500 packs per hour. Including collecting vat and elevator ( Bonino, Auxiliary Feeder, code nr 57822, date 2019 ). Including all available manuals and all programs (language in program English and Swedish).  ...

Without piping Auction-ID: A1-45406-31

Overview The handle applicator was manufactured by the German company project Automation & Engineering GmbH in 2001 and was until recently part of a PET filling line at a large German soft drinks manufacturer. The handle applicator is now being released. Technical data  Total output: 70 cycles/min electrical connection: 400V/N/PE/50Hz, 5,1kW Two lanes Additional information conveyor for packages available

S/N: PGA652414402004 Auction-ID: A1-45411-31

Motor-driven, automatic TQC film applicator 230V with perforated vacuum plate, integrated vacuum pump and combined attachment for standard film applicators and spiral squeegees. Suitable for cards and steel sheets in format from A3 to A5 Recommended applicators: Baker Lackhantel, Bird Lackhantel, Spiral Squeegee. Automatic film applicators with a perforated vacuum plate can be retrofitted with an optional double-channel vacuum plate and vice versa. .

Continuous labelling machine for self-adhesive belly labels. Can be used for various bucket sizes with a capacity of 1 – 5 kg., Additional title: Continuous labelling system, Capacity: 18 containers/min., Length: 3500 mm, Formats: 1 - 5 kg buckets, Running direction: right-hand machine, Operation / Control: Simatic Panel, Position: free standing, Base construction: Continuous machine with enclosure, Features: All-round protective cover, conveyor belt with drive, upper belt, central adjustment, single-cycle stopper, adhesive labeller with vacuum station, console cabinet, 2nd coating station, three-roller aligner

for gluing adhesive tapes and the like to aluminium profiles. Passage width approx. 150 mm, table length approx. 2500 mm, on workbench, table surface approx. 2000 x 700 mm (The article is in condition as existing and unchecked. The article is sold from the foundation and without content/material! There are no pallets available for dismantling and loading the item, other packaging material on site and the buyer has to rent a forklift, tank rollers, machine jacks, etc. at his own expense if necessary!) Auction-ID: A7-45878-46

Overview The handle applicator was manufactured by the German company project Automation & Engineering GmbH in 2001 and was until recently part of a PET filling line at a large German soft drinks manufacturer. The handle applicator is now being released. Technical data  Total output: 70 cycles/min electrical connection: 400V/N/PE/50Hz, 3,6kW Two lanes Additional information best-by date coding bottle available (Videojet Excel 170i Ultra High Speed) conveyor for packages available