strainer used for sale

Slot strainer,stainless steel,with motor scrape.

Slot strainer,stainless acid proof steel,Alfa Laval,type LKSF-CL-38

Semi-automatic counter-strainer Meiguang FMB-1300A Minimum format: 360x360mm Maximum format: 1300x1200mm Year: 2014 More photos available

Strainer, filter, water filter PAGUS ND16NW20 PN16 DN20 Installation dimensions: 150 mm Flange: Ø 105 mm Material: cast iron (GG22) New ! Dimensions: 150 x 105 x 115 mm

Suction Strainer BALTIMORE AIRCOIL 5C3154MG Cooling Tower Series 1500 Type TXV 292R New ! Dimensions: 2360 x 133 x 22 mm

Strainer, filter, water filter PAGUS ND40NW25 PN40 DN25 Installation dimensions: 160 mm Flange: Ø 115 mm Material: cast iron New ! Dimensions: 160 x 115 x 165 mm

Strainers, filters, water filters FK ND16NW25 PN16 DN20 Installation dimensions: 160 mm Flange: Ø 115 mm Material: cast iron (GG25) New ! Dimensions: 160 x 115 x 140 mm

Strainers, filters, water filters SAMSON 25ND16 PN16 DN25 Installation dimensions: 160 mm Flange: Ø 115 mm Material: cast iron New ! Dimensions: 160 x 115 x 140 mm

Strainers, filters, water filters KSB BOA-S PN16 DN25 Installation dimensions: 160 mm Flange: Ø 115 mm Material: Cast iron with spheroidal graphite ( GGG40.3 ) New ! Dimensions: 160 x 115 x 155 mm

Mudflap +GF+ ( GEORG FISCHER ) Type: 305 DN 80, PN 10 d90DN80 two adhesive sockets, metric Material: PVC-U, silicone-free housing transparent New ! Dimensions: 300 x 250 x 120 mm

Troester.200mm H/F strainer M/C Number 7175-71 L/D 6.5/1 Roller Feed 350mm. Hinged strainer head with hydraulic clamp. 125KW AC v/s motor. On single bedplate. With controls.

1 x Berstorff GmbH 250mm strainer extruder, Year of manufacture: 1988, L/D ratio 7:1, power roller feed (300mm wide), with 120kW, 1800rpm DC variable speed motor mounted on top of gearbox (belt drive), with tube head and knife at top for sheet extrusion. Complete with control panel etc and in very good condition.

Berstorff Strainer Extrusion Line Consisting of: Extruder Supplier Berstorff Type GE 150KSx16D Year of construction 2007 Pins: 12 Pins per level: 8 Condition: good Weight approx. 10000 kg Screen change: hydraulic, bladder accumulator 20lt / 300Bar D = 200mm Gear pump Supplier: Maag Pump Systems Type: extrex® 110-5 RV Volume 716 cm³ / rev Year of construction 2013 Condition: good Heaters Supplier: Regloplas Type P140 Year of construction various Number 5 pcs. Cooling bath Cooling medium Water above, 2 rows below with 4 fans each Year of construction 2006 Condition: good Dimensions 9m Weight approx. 500 kg Especially 8 fans Installation tape Year of construction 2006 Condition: good Weight about 300 kg

Berstorff 6inch (150mm) Strainer Extruder Manufactured by: Krauss Maffei Berstorff Model: GE 150 K Screw Diameter: 6"/150 mm L/D Ratio: 6 Speed: Variable, up to 45 rpm Motor: 90 KW, 1500 RPM Transmission: Direct Drive, 3 steps reduction Gear Reduction Ratio: 33:1 Year 2009

Strainer, flange strainer, filter, coarse or fine sieve -Connection: DN50 -Nominal pressure: PN16 -Width: 230 mm -Price: per piece -Number: 2 pieces -Dimensions: 230/165/H225 mm -Weight: 10.8 kg/pc.

System includes receiver tank with agitator, extractor, centrifugal pump, seal water tank, side channel pump, corner pipe strainer eluate line, corner pipe strainer condenser, vacuum unit, heat exchanger, condenser, conveyor unit V 3811 and 3811, sight glasses and fittings, with documentation.

Cat.-Nr. 11-3200 new Necessary space for mash and lauter tun: LxWxH: 3 x 2 x 2,80 m Necessary space for tanks: LxWxH: 4,0 x 5,0 m complete 2 brews / day = 10hl Basic Equipment The Brew House is complete with all equipment. All equipment are with high standard an very simple to use. This 5 hl Brew House is built as 2 devices-brew house manual version with manual butterfly valve. It is possible to make 2 brews/day (10 hl) Technology All the pipes can be cleaned and sterilized in the circuit over the pump included. a) In the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless steel from mash boiler to the lauter tun. b) After the lauter wort will be pumped back to the mash boiler. c) After emptying the lauter tun the grit floor will be removed. The lauter tun will be changed to a whirlpool. d) After cooking th ...

Cat.-Nr. 11-3210 new Basic Equipment The Brew House is complete with all equipment. All equipment are with high standard an very simple to use. This 10 hl Brew House is built as 2 devices-brew house manual version with manual butterfly valve. It is possible to make 2 brews/day (40 hl) Technology All the pipes can be cleaned and sterilized in the circuit over the pump included. a) In the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless steel from mash boiler to the lauter tun. b) After the lauter wort will be pumped back to the mash boiler. c) After emptying the lauter tun the grit floor will be removed. The lauter tun will be changed to a whirlpool. d) After cooking the hops a special injection valve is introduced inside the lauter tun so that it can be used as a whirlpool. Mashing Tun / Wort Boiler Volume brutto: ...

Technical data: Fruit wash, grind, pressing then the juice pasteurization and bag-in-box packaging pour performance up to 750 L/h incl. mounted hydraulic large box emptying wash grinding plant Kreuzmayr KWEM 1000 cover press Kreuzmayr KEB 500 Pasteur Kreuzmayr PA 750 oil bag-in-box fillers Kreuzmayr CBF 900, incl. 6-digit series bottling juice pump, strainer, 2 PCs. juice buffer tank 220 litre stainless steel base frame, Tandem chassis with tyres 195/50-10 plan building with gas spring lift for the two side walls, roll-over tarp back 4 PCs. crank rotating supports for the horizontal alignment of the System cleaner, air compressor and complete piping fix established

1 x 'Forward Machinery Industrial Corp'. (Taiwan) 4 roll inverted L calender line, Year of manufacture: 2007, Roll dimensions: 34in (860mm) dia x 157in (4000mm) wide, Peripherally drilled (oil heating), Roller bearings, Motorised nip gap adjustment, Roll bending rolls 2 and 4, Cross axis roll 3, Independent drive to each roll:- Roll 1: 110kW, Roll 2: 150kW, Roll 3: 150kW, Roll 4: 110kW. Finished product width 3600mm. Pick off rollers, Matt finish embossing station, Edge trimming, 19 x cooling drums 355mm dia x 4000mm wide, Dual station surface winder. The line is already dismantled and ready for immediate shipment. There is also upstream equipment available by separate negotiation (high speed mixers, 2 x 100L Banbury, strainer, two roll mills etc).

Strainer Bandera 150mm with 75kW motor. This machine has been overhauled by Deguma and little used after that. More info as attachment.

1 of used single-infusion brewery, make DME, capacity 32 HL / 20 BBL. RECENTLY Decommissioned – EXCELLENT condition! Brewhouse Single infusion temperature Mash Vessel with Grist Hydrator, Gas fired kettle and separate whirlpool vessel suitable for whole hops and pellets Grain Handling Floor mounted Grist case with flexible grain elevator leading to Grist hydrator Hot Liquor tank 10,000 litre vertical cylindrical vessel with stainless steel shell, shallow cone top and base. 2 x 18kW electric heating element, temperature pocket. 1.5 inch Tri Clamp outlet, Round Top Manway, all in T304. Free standing on stainless steel legs and feet . Insulated on the shell, clad in fully welded stainless steel 2.160,00 mm Diameter x 4.290,00 mm high Cold liquor tank Size and specification as per the above HLT but with a suitably sized external chilling panels Liquor Blending System Te ...

Doppstadt AK 635 Compact - Built in 2013 - Hours 4839 - Permissible total weight 25,000 kg - Mercedes Benz diesel engine 635 hp at 2,000 rpm - AD BLUE - Load-dependent control of the material feed incl. automatic scraper floor reversal - Separate drive of feed roller and scraper floor (twin drive) - Fuel tank 750 litres - Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments - Auxiliary hydraulic connection 11 cm³ - Rear hinge: wheelbase 6,150 mm, - Scratching floor with 34 strips - Overbelt magnet -Radio remote control incl. transmitter, receiver, - Strainer basket Machine is overhauled and immediately available

similar to AZO E 650,. MILD steel, drive: 2,2 kW, Strainer basket: D = 200 mm, L =.700 mm,. without cover,. Enema: D = 150 mm, spout: D = 150 mm, oversize spout: D = 120 mm Dimensions including frame:!. 550 x 500 X 1,300 mm (L X W X H)

Shredding plant / chipper / shredder for shredding wood waste - Waste wood waste - Pallets - Packaging material and waste of many kinds Make: VECOPLAN - MASCHINENBAU Type: VAZ 300/180 Silent and slow-running. Propulsion:132. Kw. Rotor width:1800.mm. Rotor diameter:420.mm.(solid steel.) Rotor speed:80-120 rpm Capacity: 1500-2000.kg/h.je by material and task. Tools-knives ( cutting crowns 80x80 mm ) Sieve: 30.mm. round hole reinforced design Hydraulic strainer and rear flap with lowerable counter knife Conveyor belt cut-out 1000.mm. Insertion: approx. 1800 x 3000.mm. Weight: approx. 18.500.Kg. Included: control cabinet system + hydraulic system + operating instructions + electrical circuit diagrams. Dealer price 34.500.00€ net ex location. The machine is in good general condition

Stationaere welding smoke extraction with 1500m3/h suction suction systems and added cyclon dust separator Aspirator: Manufacturer Lincoln Norweld Prosessventilasjon AS Norway Series 2355 Type SP-15 1500m3/h 2050 mm/WG 380 Volt 34 Ampere 18.5KW Filter Manufacturer Lincoln Norweld Prosessventilasjon AS Norway Type SF-1500-G Filter Strainer system can be used immediately. Special price

Stationary universal shredder Komptech Crambo 3400, built in 2011, including hopper and elevation Manufacturer: Komptech Type: Crambo 3400 Year of construction: 2011 Hours: 3912 Propulsion: 160 kW Roller speed: max. 32 min-1 Roll length: 2820 mm Roller diameter: 610 mm Throughput: up to 45 t/h Strainer: 12.5 cm Dimensions: 5772 x 2949 x 3191 mm Weight: 19000 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment takes place ex works, without guarantee and guarantee.

Plant for the pressureless production of an aqueous chlorine dioxide solution. The two starting materials will be successively conveyed with peristaltic pumps in a reaction vessel. There, the levels are over a level probe is scanned so that a correct mixing ratio of 1: 1 is guaranteed. In addition, the running time of the peristaltic pumps is monitored by the software. After the reaction time, the finished chlorine dioxide solution is rinsed with water in the reservoir tank and metered from there by means of diaphragm metering pump and metering valve at the point of use., Additional title: Water treatment - chlorination, Capacity: 18 g/h ClO2, Dosage volume: 9 l/h against 7 bar, Operating pressure: 6 bar, Operating temperature: 30 °C, Voltage: 120-240 V, Frequency: 50/60 Hz, Length: 290 mm, Width: 620 mm, Height: 820 mm, Operation / Control: Siemens S7-300 with color-touchpanel, Feature ...

BBA ( Cornell )5RB-F16 NEW and UNUSED driven by a DEUTZ BF4M2012C(2007) with 5700 workinghours, Machine is fully serviced and checked by manufacturer.( BBA), Electrical part is completely renewed, Pump is new and unused, Is offered with 8 DN200 suction hose with strainer., Motor is built in a soundproof housing., Vacuum pump is a BBA MP50, , Machine is ready for immediate use and in stock!, , Throughput capacity: 600 m3/h, Max dirt passage: 35 mm, Motor brand: DEUTZ BF4M2012C, Max. head: 110 MWK, Max dirt passag: 2300 rpm, , = More information =, , Year of manufacture: 2022, Applicable material: Water, Empty weight: 4.750 kg, Connector size: 8 inch, Technical condition: very good, Visual appearance: very good, Damages: none, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, ,  ...

TECHNICAL SPECIFICATIONS Manufacturer: BINDER+CO Designation: BIVITEC expansion shaft screening machine Design: Dry screening Type: KRL 1600x6 Number of screen decks: 1 pc. Year of construction: 1995 Drive cable: 22 kW Feed capacity: 80 - 100 t/h Dimensions (length/width): 6,000 x 1,600 mm Screening area: 9.6 sqm Screen lining deck 1: Synthetic Strainer tank: available SPECIFIC COMMENT - Very good technical condition (optically only flash rust) - Incl. solid steel support on carriage - Incl. discharge conveyor - Incl. numerous spare parts/wear parts - Control attached directly to steel support

Overview The brewhouse was manufactured in 2017 by the Czech company HANSTEEL s.r.o.. With it, 5 hl can be produced. Technical details Two-chamber brewhouse with electric heating system. Nominal volume: 500l Total volume: 550l Brewhouse is mounted on separate frame with stainless steel stairs and platform Incl. cooler from Alfa-Laval: cooling of 500l in 1h from 99°C to 12°C Butterfly valves on the chimneys Agitators in both vessels with frequency converter to change the speed Strainer bucket with level sensor for automatic water refilling control of the brewhouse via a touch screen display accessible from the working platform the app needed to control the brewhouse can be installed on a portable device (e.g. tablet) and the operation of the brewhouse can be controlled remotely There is also a possibility to offer for sale open fermenting vats with a nominal volume of 1000 l (total volu ...

Container, granule container, storage tank, powder container, storage tank, color powder container -Container: Stainless steel container with sieve insert -Capacity: approx. 500 liters -Strainer: Ø 10 mm -Container contents: color powder -Dimensions: 1070/860/H950 mm -Weight: 201 kg

Submersible pump, chemical pump, water pump, centrifugal pump FLUX - GERÄTE GmbH Type 630 Material: PP Immersion Depth: 1140 mm Pump base: Ø 150 mm Pump flange: Ø 265 mm bolt circle diameter: Ø 225 mm 8x bore: Ø 17,5 mm Motor: BAUKNECHT RF 1.5/2-72 2,2 kW 2880 rpm 220 / 380 V 3AC 50 Hz IP44 Suction strainer slightly damaged used, checked ! Dimensions: 1710 x 270 x 270 mm

General SKU032U185 LocationBarneveld MakeHoefnagel & Meijn No.91410-01, Design pressure 0,3 bar Year of construction1991, Strainer perforation dia. 5mm Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel FilterStrainer/Basket filter (1x) Information Extra SpecificationsMounted on legsMiscellaneous filtersHoefnagel&meijnFilters > Miscellaneous filtersBrand > Hoefnagel&meijn What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU230N087 LocationBarneveld MakeReko Industrial Equipment BV TypeInternally-fed drum screen TI-S 1200/1400 No.TZX0006/0001/S Year of construction2008 Main Features MaterialStainless steel Motor1.5 KW Length4000 mm Specified Features - Rotating sieve Rotating sieveRotating drum sieve Sieve sizesdia. 1200x4000mm Motor1,5 KW, 230/400 Volt Sieve perforation3 and 4mm MaterialStainless steel Information Floor space5,0x1,6 M Total height2,5 M Weight2000 KG Extra SpecificationsINTERNALLY FED DRUM SCREEN Separation of solids from waste and process water by means of an internally fed rotating perforated drum strainer. Rotating sievesReko koepckeSieves > Rotating sievesBrand > Reko koepcke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ins ...

Pressure reducer, pressure regulating valve, for domestic water, with strainer HONEYWELL BRAUKMANN D 06 F ( D06F ) 1/2- DVGW 0432 Installation dimensions: 80 mm Water connections: R1/2 housing material: brass New, with documents ! Dimensions ( pressure minder ): 80 x 64 x 150 mm

Pressure reducer, pressure regulating valve, for domestic water, with strainer, 2 pieces KEMPER Figure 710 0G 7100G01500 < br />DVGW P-IX 7898/I DN15 Installation dimensions: 90 mm Water connections: G3/4 Brass New ! Dimensions ( pressure reminder ): 175 x 90 x 80 mm Dimensions ( packaging ): 180 x 175 x 80 mm

Foot valve PROMINENT 1029475 DN40 G 2 1/4 ( inches ) Material: PP body, FKM gaskets, glass strainer and check ball New ! Dimensions: 155 x 104 x 180 mm

General SKU230N088 LocationBarneveld MakeReko Industrial Eqiupment BV TypeInternally-fed drum screen TI-S 1200/4000 No.TZX0006/0002/S Year of construction2008 Main Features MaterialStainless steel Motor1.5 KW Length4000 mm Specified Features - Rotating sieve Rotating sieverotating drum sieve Sieve sizesdia. 1200x4000 Motor1,5 KW, 230/400 Volt Sieve perforation3 and 4mm MaterialStainless steel Information Floor space5,0x1,6 M Total height2,5 M Weight2000 KG Extra SpecificationsINTERNALLY FED DRUM SCREEN Separation of solids from waste and process water by means of an internally fed rotating perforated drum strainer. Rotating sievesReko koepckeSieves > Rotating sievesBrand > Reko koepcke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspe ...

General SKU200W001 LocationBarneveld MakeHPV TypeDish LPD liquid processing unit No.1200-0708/2008 Year of construction2008 Main Features MaterialStainless steel Motor5.5 KW Specified Features - Inline mixer Capacity18,0 t/h of final product MaterialStainless steel 1.4435 (316L) Information Total height2,6 m Weight3500 kg CEcheck Floorspace6,4x2,35 m Extra Specificationsperfume, aroma, mixing skid The LLPD mixing machine is designed for continuous mixing of the final product and its accumulation for subsequent pumping into final packaging. The machine is capable of producing various modifications of the final product (FP) in 10 perfume variants and different color spectra available within the capacity ranges of dye dosing systems. Qualified reblend (RB) can be added to FP during normal production within the dosing capacity range. The LLPD mixing machine consists of: � ...

Pressure reducer, pressure regulating valve, for domestic water, with strainer PAGUS 1/2 inch set pressure: 4 bar installation dimension: 125 mm water connections: 1/2 ( inch ) thread: 3/4 ( inch ) housing material: brass new, with documents ! Dimensions: 150 x 125 x 70 mm

Bottom valve, foot valve, with check valve PAGUS 4 ( inches ) DN 100 PN 6 female thread: 4 ( inch ) width across flats: 135 mm with suction strainer: Ø 133 mm, length: 210 mm, mesh: Ø 8 mm Material: Steel, cast iron, New ! Dimensions: 390 x 170 x 117 mm

Overview This complete brewhouse was manufactured in 2016 by the German manufacturer Sudhausbau. The plant can be visited and tested at any time, as everything is still connected and in operation. Components Grist mill 1 piece grist mill 2 foot stands with rubber bumpers 1 additional larger hopper Throughput up to 200 Kg/h Brewhouse in stainless steel Cast wort/ brew 2 units steam heated Control system with automatic mashing Switch and control cabinet Completely wired and ready for connection Control cabinet assembly with: 1 x control via touch screen Siemens 9 1 x contactor circuit 0,37 KW agitator 1 x contactor circuit 0,37 KW chipper 1 x contactor circuit 230V/16A steam valve 2 x 24VDC outlet temperature sensor 2 x temperature measurement Analog input 4-20 Hardware and software The control unit with automatic mashing is designed for the connection of the agitator, chopper and 2 temper ...

Automatic hardcover counter strainer equipped with: • Automatic Cover Feeding • Automatic carton feeder from 1 to 5 pieces • With servo motors and 3 photoelectric sensors for the registration of the sheet on the side and diagonal cardboard • Automatic viscometer • Touch screen for convenient and quick adjustment of the machine It allows cardboard lining with window and cardboard lining with some irregular shapes (such as some non-straight side). Maximum format size of 900 x 460 mm

Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operati ...

Valves for sale: Butterfly valves Ball valves Gate valves Globe valves Strainers, valves Total 23 266,50 kg pieces: 1403 Detailled information is annexed: - list of the valves by type - pictures of the valves - selling conditions More information is available by phone +358400 623832 Offers can be sent by eMail to kyosti.kokkikivi-impressio.fi