straightening used for sale

material width: 1550 mm material thickness: 2,50 mm no. of straightening rolls: 21 sheet thickness - min.: 0,60 mm diam. of the rolls ca.: 49,46 mm work speed: 9,3 / 18,6 m/min barrel length ca.: 1775 mm No. of supports up/down: je 7 -fach No. of support rolls: 161 total power requirement: 29 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 5,10 x 1,60 x 2,35 m - Infeed and outfeed table - Roller removal device - Control panel attached to the straightening machine - Switch cabinet - Box with 11 spare rollers with a diameter of 49.46 mm - Electric motorized crowning at the bottom - Height adjustment by electric motor - Swivel/tilt device electric motor - Reversible Switch cabinet: Weight 150kg L x W x H: 1.20 x 0.40 x 2.10 m Table with conveyor belt: Weight 300kg L x W x H: 3.70 x 2.10 x 0.90 m Rollebach: Weight 200kg L x W x H: 2.80 x 1.60 x 0.85 m 1 box of straightening ...

material width:500 mm coil weight:3,0 t material thickness:0,2 - 2,5 mm coil internal diameter:470 - 530 mm coil external diameter:1400 mm no. of straightening rolls:9 straightening roll diameter:40 mm number of inlet and outlet rolls:4 material cross-cut:1200 mm² speed:1,5 - 30 m/min dimensions decoiler (WxDxH):1,9 x 0,6 x 1,7 m weight decoiler:1,1 t dimensions straightener (WxDxH):3,3 x 1,3 x 2,7 m weight straightener:3,0 t straightening machine:RYD 40 x 500 decoiler:DY 500 x 3000 coil lifting device:hydraulic rool feed:elektronic; AESL 500-2,8 threading device:hydraulic expansion:hydraulic

pressure:600 t distance between columns:3640 mm stroke:350 mm no. of strokes:11 - 44 /min Distance table/ram, max. stroke up, adjustment up:1550 mm table surface area:3600 x 2500 mm sliding table:3600 x 2500 mm ram surface:3600 x 2500 mm Side window:2200 mm ram adjustment:400 mm material width coil line:500 - 1950 mm Material thickness at 1200 mm material width:0,6 - 2,5 mm Material thickness at 1850 mm material width:0,6 - 2,0 mm Material thickness at 1950 mm material width:0,6 - 1,75 mm Coil weight:35,0 t coil internal diameter:610 mm coil external diameter:900 - 1900 mm no. of straightening rolls:13 straightening roll diameter:50 mm Stack height:400 mm stacking dimensions - station 1+2 (L x W):150-2000 x 250-2000 mm stations:2 power requirement:112,0 + 35,0 kW Weight:390,0 t Dimensions (WxDxH):7,3 x 5,1 x 15,0 m Height above floor:9,1 m Height below floor:5,9 m clutch-/ brake combinat ...

-Sale by owner our used lines meets after reinstallation by us the Definition RETROFIT COMPLETE equipment, incl. Filzmoser straightening system if you are interested, please request an offer Plans, pictures and CAD drawings are available, without mixer, ready for loading, Filigrandecken and double-walled movement, Filzmoser straightening system with robot. ErICH PETER MACHINES-PLANTS GMBH is engaged in complete solutions for the Realization of construction projects according to EU standards. They are not a construction company, but convey the required knowledge in theory and practice to plan, calculate and implement construction projects. Offers include: • Creation of business, master and execution plans • Sale of various machines and equipment for the production of building materials and prefabricated parts • Commissioning of the plants and personnel train ...

Rounds: 130 mm Squares: 0 mm Flats: 0 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 1   IMCAR - RAD PIR Pyramidal Straightening Machine Flange ø 309mm x 100mm MACH - ID 6356 Make: IMCAR Type: RAD PIR YOP: 1999 Horizontal and vertical     Horizontal Shaft Ø    130 mm Number of rolls     3 Horizontal       Horizontal Working speed       0 - 5 mm pyramidal straightening machine with 450 rol diameter Flange ext. ø 309mm, thickness 18mm (material iron) Flange ext. ø 360mm, thickness 35mm (material iron) Flange ext. ø 330mm, thickness 35mm (material iron) Flange ext. ø 170mm (material teflon)  Flange ext. ø 309mm, thickness 18mm (material iron) Flange ext. ø 360mm, thickness 35mm (material iron) Flange ext. ø 330mm, thickness 35mm (material iron)  ...

Ribbon system Covema-Schwabe Y.O.M. 1994 User manual with functional overview - Machine control elements - Program overview - Commissioning and storing removal Reel MHM 2 - hydraul. Spreading (motor 1.5 kW / 1500 U) - hydraul. Pressure roller - with drive max. coil weight - 2 t Coil outside through. - 1650 mm Coil inner throughm. - 350 - 460 mm Bandwidth - 400 mm Feed machine VRMA 32/96 Bandwidth 320 mm Straightening roller sifm. - 40 mm, 7 pcs Straightening head can be done by hydraul. to open Intermediate air central. Controller more info on request

CNC profiling and cut-to-length line make RAS type 29.17 line 2005serial no. 10/1, year of construction 2001consisting of:a)Sheet metal/strip straightening machine RAS type 26.45, built in 2001Sheet thickness (galvanized sheet steel up to 400N/mm2): 0.5 - 1.25 mmBelt width: 500 - 1500 mmStraightening speed: 0.9 - 15 m/min.Number of straightening rollers: 6 piecesNumber of take-off rollers: 4.8 kWWeight approx.: 2.1 twith movable control panelb)Roll feeder RASBelt width :500 - 1500 mmMax. feed length: 9999.99 mmFeed accuracy per 1000 mm: 0.2 mmDrive power: 1.8 kWWeight approx.: 1250 kgwith curved infeed roller conveyorc)Cut-to-length guillotine shears RAS type 82.16, built in 2001Max. cutting length: 1640 mmMax. sheet thickness: 2.0 mmCutting angle: 1.36°Strokes per minute: 63Stand projection: 100 mmsmallest remaining strip: 35 mmTable height: 750 mmDrive power: 3.0 kWWeight approx.: 950 ...

Scaffolding production line built in 2015 is designed for the efficient production of steel boards used in construction scaffolding. The sheet metal unrolled from the coil goes through a straightening machine and is then subjected to the relevant machining stages. At the beginning of the machining process, the appropriate side holes are punched and the sheet is perforated to ensure adequate slip resistance. In a further stage, the sheet goes through a rollforming line, which gives the final shape of the board. The installed software of the machine allows to choose from 8 different steel scaffolding board lengths ranging from 0.73 m to 3.07 m. A complete steel scaffolding boards production line with tooling performs the entire process fully automatically. The automated production line for construction scaffolding boards consists of the following components: – software – B&R PP41  ...

Straightening ruler, straightening rail -Angle: 32° -Dimensions: 3000/50/H8 mm -Weight: 8.4 kg

material width:150 mm material thickness:1,5 mm power requirement:3,0 kW no. of straightening rolls:7 straightening roll diameter:50 mm number of draw-in rolls:4 weight:0,67 t Dimensions (WxDxH):1,3 x 1,1 x 1,6 m

material width:300 mm material thickness:- 3,0 mm no. of straightening rolls:7 Stück straightening roll diameter:60 mm weight:0,8 t Dimensions (WxDxH):0,9 x 1,5 x 1,4 m

material width:500 mm material thickness:0,6 - 1,6 mm no. of straightening rolls:7 straightening roll diameter:60 mm number of draw-in rolls:2 + 2 inlet roll diameter:60 mm max. material thickness:2,0 mm material thickness at 150 mm material width:2,0 mm material thickness at 500 mm material width:1,6 mm weight:0,5 t dimensions (WxDxH):0,8 x 1,0 x 1,2 m

material width:550 mm material thickness:0,4 - 1,6 mm no. of straightening rolls:11 straightening roll diameter:60 mm number of draw-in rolls:4 diameter of draw-in rolls:60 mm band speed:4 - 50 m/min power capacity:3,0 kW weight:1,7 t Dimensions (WxDxH):2,5 x 2,0 x 1,7 m

material width:120 mm material thickness:0,4 - 4,0 mm no. of straightening rolls:19 straightening roll diameter:24 mm material cross-cut:120 mm² :40 mm bending speed:5 - 25 m/min weight:0,85 t dimensions (WxDxH):1,2 x 1,7 x 1,6 infinitely variable drive:Stöber

material width:250 mm material thickness:0,2 - 2,0 mm no. of straightening rolls:7 straightening roll diameter:60 mm run-in height:1250 mm power capacity:4,0 kW weight:0,65 t Dimensions (WxDxH):1,05 x 1,25 x 1,5 m

material width:450 mm material thickness:0,5 - 1,0 mm no. of straightening rolls:6 straightening roll diameter:53 mm number of draw-in rolls:2 diameter of draw-in rolls:96 mm power requirement:1,0 kW weight:0,65 t dimensions (WxDxH):1,0 x 1,0 x 1,55 m

material width:200 mm material thickness:0,5 - 3,0 mm no. of straightening rolls:6 straightening roll diameter:70 mm number of draw-in rolls:2 diameter of draw-in rolls:160 mm power requirement:3,1 kW weight:1,1 t dimensions (WxDxH):1,5 x 1,2 x 1,9 m

material width:310 mm no. of straightening rolls:5 straightening roll diameter:25 mm dimensions (WxDxH):0,4 x 0,6 x 1,15 m

material width:210 mm no. of straightening rolls:6 straightening roll diameter:40 mm dimensions (WxDxH):0,45 x 0,6 x 1,1 m

material width:250 mm material thickness:0,5 - 4,0 mm no. of straightening rolls:9 straightening roll diameter:60 mm number of draw-in rolls:2 power requirement:3,8 kW Weight:0,8 t Dimensions (WxDxH):1,6 x 0,8 x 1,5 m

material width:600 mm material thickness: - 4,0 mm no. of straightening rolls:21 straightening roll diameter:30 mm material cross-cut:1800 mm² speed:6 - 36 m/min Power capacity:4,5 kW Weight:2,0 t Dimensions (WxDxH):1,5 x 2,0 x 1,9 m

Various parts for straightening machines Ungerer, strip width 1500 - 1700 mm - Straightening rollers, stutz rollers, bearing frames, coupling shafts .. - Gears - Engine - Gearboxes, etc. More info on request

Pivatic perforating and bendingline Line is manufactured 1999 and it has worked very well for us 20 years. Line is bending line with perforation unit and single press unit 35 tn. In line is separate punching unit so you can perforate material and cut it to separate ballet. Also you can use separate press toll in line. This press unit we have not used, because we other presses. FORSTNER coil cradle Weingarten Decoiler Dimeco Coil feeding line decoiler - straightener feeder Automatic Flexible punching and rollforming line for C and sigma profiles with centralized adjustment”, from Dimeco (Spain), installed/commissioned in 2019 Dimeco Coil feeding line PIVATIC coil punching line FIMI Slit Coil Decoiler and reel winder tunçman Extrusion - Single screw extruder LEMO INTERMAT Thermoforming - Automatic Roll-Fed Machine Uhlmann Blister machine Accela-Cota 170 l Tablet c ...

Pivatic perforating and bendingline Line is manufactured 1999 and it has worked very well for us 20 years. Line is bending line with perforation unit and single press unit 35 tn. In line is separate punching unit so you can perforate material and cut it to separate ballet. Also you can use separate press toll in line. This press unit we have not used, because we other presses. FORSTNER coil cradle Weingarten Decoiler Dimeco Coil feeding line decoiler - straightener feeder Automatic Flexible punching and rollforming line for C and sigma profiles with centralized adjustment”, from Dimeco (Spain), installed/commissioned in 2019 Dimeco Coil feeding line PIVATIC coil punching line FIMI Slit Coil Decoiler and reel winder tunçman Extrusion - Single screw extruder LEMO INTERMAT Thermoforming - Automatic Roll-Fed Machine Uhlmann Blister machine Accela-Cota 170 l Tablet c ...

406mm x 14mm API Pipe Mill Year New: 2006 Material Grade: X70 / X52 Pipe Diameter: 4.5" - 16" Wall Thickness: 4mm - 14mm Pipe Length: 6m - 14m Coil Width: 1350mm Coil OD: 2200mm Coil Weight: 25 ton Four (4) Entry Storage Area Floor Standing V-Type Coil Car Mandrel Uncoiler (5.5Kw Drive) Automatic Shear & End Welder Coil Straightener Horizontal Accumulator Forming Mill Six (6) Forming Stands Three (3) Side Clusters Four (4) Finn Passes 280Kw & 355Kw Forming Drives Welding Section Mechanical 4 - Roll Squeeze Box 800Kw EFD High Frequency Welder Two (2) Mid Frequency Annealing Heads Sizing Mill Four (4) Sizing Stands Two (2) Straightening Turk Heads 200Kw & 400Kw Sizing Drives Milling Flying Cut Off Rotary Double Saw Blades Diameter: 355mm Speed Accelerating System Digital Length Control Hydraulic Cut-Off Drive Mechanical Traverse Powered Run-Out  ...

pressure: 28 t stroke: 180 mm table-size: 300 x 550 mm diameter of piston: 130 mm work speed: min. 2 m/sec work speed: max. 9,8 m/sec return speed: 20 mm/sec Max. pressure: 200 bar weight of the machine ca.: 0,65 t total power requirement: 4 kW dimensions of the machine ca.: 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled ...

Clamping plate, welding table, welding table, straightening plate, straightening table -Width: 1000 mm -Length: 720 mm -Height: 200 mm -with supporting ribs -Plate thickness: mm -Weight: 486 kg

welding table, straightening table, straightening flap, work table, clamping table measuring plate, measuring table PAGUS working surface: 355 x 260 mm working height: 65 mm with holder for measuring tripod Ø 20 mm ! Dimensions: 355 x 260 x 65 mm

Welding table, straightening table, straightening pad, work table, clamping table test plate, spotting plate PAGUS 500 x 400 mm height: 90 mm Dimensions: 700 x 410 x 90 mm

welding table, straightening table, straightening flap, work table, clamping table measuring plate with measuring stand, measuring table PAGUS working surface: 300 x 270 mm working height: 50 mm tripod height: 275 mm with measuring stand Ø 12 mm ! Dimensions: 300 x 270 x 330 mm

Welding table, straightening table, straightening flap, work table, clamping table measuring table FEINMESSZEUGFABRIK SUHL Measuring range: 160 mm Projection: 100 mm Working surface: Ø 100 mm Working height: 125 mm massive version, with dial gauge ! used, checked ! Dimensions: 210 x 270 x 420 mm

Welding table, straightening table, straightening flap, work table, clamping table measuring plate, lapping and control plate PAGUS working surface: 800 x 800 mm working height: 100 mm Dimensions: 800 x 800 x 100 mm

welding table, straightening table, straightening flap, work table, clamping table measuring table FEINMESSZEUGFABRIK SUHL Measuring range: 160 mm Projection: 100 mm Working surface: Ø 100 mm Working height: 125 mm massive version ! with dial gauge and second work surface ! used, tested ! Dimensions: 210 x 270 x 420 mm

welding table, straightening table, straightening flap, work table, clamping table measuring table FEINMESSZEUGFABRIK SUHL Measuring range: 160 mm Projection: 100 mm Working surface: Ø 100 mm Working height: 125 mm massive version, with dial gauge ! used, checked ! Dimensions: 210 x 270 x 420 mm

Welding table, straightening table, straightening flap, work table, clamping table measuring table FEINMESSZEUGFABRIK SUHL Measuring range: 160 mm Projection: 100 mm Working surface: Ø 100 mm Working height: 125 mm massive design with dial gauge and illumination !; used, checked ! Dimensions: 210 x 270 x 420 mm

welding table, straightening table, straightening flap, work table, clamping table small measuring table, measuring table MITUTOYO code No. 7052 measuring range: 30 mm projection: 45 mm working surface: Ø 40 mm used, tested ! with dial gauge ! Dimensions: 110 x 62 x 180 mm

Welding table, straightening table, straightening flap, work table, clamping table measuring table FEINMESSZEUGFABRIK SUHL TGL 15043 Measuring range: 160 mm Projection: 100 mm Working surface: Ø 100 mm Working height: 125 mm dial gauge holder: Ø 28 mm with adapter for dial gauge Ø 8 mm solid design, with dial gauge ! used, checked ! Dimensions: 270 x 195 x 425 mm

welding table, straightening table, straightening flap, work table, clamping table measuring table PAGUS 130 x 200 mm measuring height: max. 525 mm Projection: 120 mm working surface: 130 x 200 mm Working height: 70 mm dial gauge mount: Ø 27,5 mm, Length: 52.5 mm Column: Diameter: Ø 50 mm, Length: 600 mm used, tested ! Dimensions: 305 x 130 x 670 mm

Welding table, straightening table, straightening flap, work table, clamping table electronic micrometer, micrometer ADA FLOUR - LHOMARGY MI.21 Measuring height: 20 mm Projection: 88 mm Working surface: Ø 58 mm / 150 x 115 mm Operating voltage: 220 V AC 50 Hz used, tested ! Dimensions: 260 x 160 x 375 mm

welding table, straightening table, straightening flap, work table, clamping table work table, clamping table, welding table, machine table GEORG 5400 x 1000 mm box profile: 160 x 90 mm height: 760 mm center groove over 8 profiles 40 x 25 mm Dimensions: 6350 x 1000 x 760 mm Weight approx. 4 ton

sheet width: 0500 mm coil outside dia.: 1400 mm weight max. in kg: 4000 kg plate thickness: 0,80 - 3,60 mm diam. of the rolls ca.: 80 mm feed rolls: 2 nomb. of straightening rolls: 7 exit pinch rolls: 2 speed: 5-30 m/min range of expansion ca.: 445 - 530 mm expansion: manuell total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Control conversion to SIEMENS S7 in 2012 - pneumatic pressure roller on the side - pneumatically ventilated feed roller - Straightening rollers manually adjustable - lateral belt guide at the inlet - Large roller basket at the outlet - Ultrasonic transmitter for loop control - Roller feed type 1125 D - Bandwidth max. 510 mm - Band thickness max. 6 mm with full width 5.50 mm - Roll diameter 125mm - Feed speed: max. 100 m/min. - pneumatically ventilated top roller - Lateral tape guide with digital display - Inlet roller basket  ...

sheet width: 0120 mm coil outside dia.: 1200 mm weight max. in kg: 300 kg sheet thickness - max.: 1,00 mm diam. of the rolls ca.: 10 mm nomb. of straightening rolls: 16 diameter of the mandrel: 350 - 530 mm total power requirement: 5,50 kW weight of the machine ca.: t dimensions of the machine ca.: m - Reel and straightener as a combination with a common frame - Manually adjustable reel brake - Coil limiting ring at the front, fixed washer at the rear - Reel can be moved manually laterally - manual reel spreading - side belt – guide rollers with central adjustment at the inlet - manual block adjustment of the straightening mechanism, display via dial gauges - Oil - central lubrication - Loop control via sensor - Speed adjustable via potentiometer - Manually adjustable hold-down roller at the inlet - Large roller basket with cover on the outlet - Free-standing control panel - Lateral a ...

sheet width: 0120 mm coil outside dia.: 800 mm weight max. in kg: 150 kg plate thickness: 1,50 mm diam. of the rolls ca.: 12 mm nomb. of straightening rolls: 16 diameter of the mandrel: 180 - 550 mm total power requirement: 5 kW weight of the machine ca.: t dimensions of the machine ca.: m - Reel and straightener as a combination with a common frame - Manually adjustable reel brake - Coil limiting ring at the front, fixed washer at the rear - Reel can be moved manually laterally - manual reel spreading - side belt – guide rollers with central adjustment at the inlet - manual block adjustment of the straightening mechanism, display via dial gauges - Oil - central lubrication - Loop control via sensor - Speed adjustable via potentiometer - Belt support at the outlet - Free-standing control panel - Lateral adjustment of the reel using a hand crank - Belt support at the outlet The data  ...

Welding table, straightening table, straightening flap, work table, clamping table test plate, spotting plate, test ruler, spotting ruler PAGUS Working surface: 1500 x 100 mm height: 225 mm used, tested ! Dimensions: 1500 x 100 x 225 mm

Clamping plate, marking plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate -Clamping plate: straightening plate with base frame -Length: 450mm -Width: 450mm -Table thickness: 29 mm -Total dimensions: 855/450/H1135 mm -Weight: 59 kg

welding table, straightening table, straightening pad, work table, clamping table test plate, spotting plate, test ruler, spotting ruler WMW working surface: 500 x 100 mm TGL 7680 height: 120 mm used, tested ! Dimensions: 510 x 100 x 120 mm

welding table, straightening table, straightening pad, work table, clamping table work table, metal work table PAGUS working surface: 870 x 570 mm working height: 840 mm panel thickness: approx. 23 mm Material: steel used, tested ! approx. 150 kg Dimensions: 870 x 570 x 840 mm

Welding table, straightening table, straightening flap, work table, clamping table test plate, spotting plate PAGUS 305 x 205 mm plate thickness: 15 mm height ( without adjustable feet ): 63 mm used, tested ! Dimensions: 470 x 200 x 90 mm

Key data: 2 mm

Bandwidth 15.00 mm Strip thickness. 0.5 - 2.0 mm Coil weight... 7,000 kg Profiles... 4 pcs. Speed approx. 20 m/min. Straightening rollers 7 pcs. Complete cut-to-length and cut-to-length line with decoiler, insertion table, straightening machine, cross shears, Longitudinal scissors, electric control.

Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Manufacturer: Stolle, clamping plate: with support ribs -Length: 2495mm -Width: 1500mm -Plate thickness: 40 mm -Plate: with supporting ribs (without straightening blade, not included) -Transport dimension: 2495/1500/H810 mm -Weight:2370 kg