straightening used for sale

pressure:200 t distance between columns:2900 mm stroke:800 mm dimensions of the machine ca.:3300 x 2700 x 3100 mm Table dimensions:2500 x 2000 mm :4000 mm :33 mm/sec :33 mm/sec distance table - lower edge of ram:1100 mm table height over floor:750 mm :2300 mm return capacity:25 t total power requirement:15 kW Oil Cooling:1 kW stroke speed:18 mm/sec down speed:2 - 10 mm/sec :200 l table plate:100 mm distance between columns:2400 mm open height:1000 mm weight:9 t Table Height:750 mm :34 Lt./min. Impact leper extension removable (200 mm long):550 ? Table top flattened, with or without T-slots:7900 ?

pressure:200 t distance between columns:1550 mm stroke:400 mm dimensions:ca. 4400 x 3250 x 4100 mm Table dimensions:1500 x 1500 mm distance table - lower edge of ram:1590 mm return capacity:20 t total power requirement:20 kW Oil Cooling:1,5 kW stroke speed:25 mm/sec down speed:10 mm/sec :250 l table plate:120 mm Table cut-out:550, 450, 350 und 200 mm table speeds:30 mm/sec

pressure:400 t distance between columns:2500 mm stroke:600 mm Table dimensions:2500 x 2000 mm distance table - lower edge of ram:600 mm total power requirement:18 kW speed of forward flow:9 mm/sec Return Speed:19 mm/sec :67 Lt./min. Total weight, approx.:26 t

pressure capacity max.:50 t

pressure capacity max.:25 t

CNC - Sheet Metal Parts - Roll Straightening Machine for plane straightening and relaxing of thermally cut sheet metal parts, for stamped parts, for sheet metal parts that have been cut to size with the sheet shear. Our roller straightening machine is a purely electric machine, not hydraulics, the electronically controlled servo motors enable automatic CNC – controlled face straightening in the continuous process. CNC – controlled precision sheet metal parts roll straightening machine for sheets from 0.7 mm to a maximum of 14 mm sheet thickness at 500 mm sheet width Largest sheet width 1,500 mm Guideline power over the full width - - Steel sheet quality SR235 from 0.7 mm to 10 mm - Stainless steel sheet from 1 mm to 6 mm Planning by - 19 piece straightening rollers with Ø 50 mm 21 pieces of intermediate rollers with Ø 30 mm 13 pieces of support roller sets with ...

Description: .DIMECO R 693 J+ sheet metal straightening machine y.o.m 2020! - Number of straightening rollers 17 - Number of pull rollers 2 - Pull rollers diameter 180 mm - Number of support rollers 147 - Largest roller distance 200 mm The machine is equipped with: - Control cabinet with drive outlets for height adjustment on the inlet/outlet side of the straightening cassette as well as for the two main drives connected in parallel - Hydraulic unit for the hydr. Movements of the infeed table and the delivery of the infeed driver - Support rollers firmly installed at the top and bottom - Documentation, digital only! - Additional, unused straightening roll cassettes with 17 straightening rolls and intermediate rolls at the top and bottom. The machine was until lately integrated into a fully automatic punching line, therefore it is necessary to complete the control system. There is al ...

Offer different straightening plates, tool tables with the following dimensions and prices: Straightening table 1 with feet: 3500 x 1500 mm, 4.000 kg, price € 3.200,- Bkxzorwqgc8 Straightening table 2 with feet: 2000 x 1500 mm, 1.500 kg, price € 2.200,- Straightening table 3 with feet: 2000 x 1000 mm, 1.200 kg, price € 1.600,- Straightening table 4, one foot missing: 2810 x 600 mm, 900 kg, price € 1.000,-

material width:450 mm material thickness:1,0 - 14,0 mm coil weight:10,0 t coil internal diameter:470 - 520 mm coil external diameter:1100 - 2000 mm no. of straightening rolls:12 straightening roll diameter:2x70 / 2x96 / 8x127 mm number of draw-in rolls:2 inlet roll diameter:160 mm min. material width:100 mm speed:15 m/min power requirement:75,0 kW weight of decoiler:6,4 t weight of straightening machine:12,8 t dimensions decoiler (WxDxH):3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH):2,5 x 3,4 x 2,7 mm straightening machine:RMS-Vario-12-70/96/127-0450 infinitely variable drive:insert drive upper straightening part:hydraulic liftable loop bridge:hydraulic driven threading wedge:hydraulic decoiler:HES 12-650 infinitely variable drive:insert drive lag brake:pneumatic snubber roll:hydraulic; motoric driven expansion:hydraulic coil lifting device:hydraulic cropping shears:HS-150-0450

Kohler unwinding reel with 9 roll straightening unit Last use Align copper L profile from coil, feed profile via balancing section. Specifications Number of rollers: 9 pieces Roll diameter: 30 mm Throughput width: 120 mm Belt speed: 0-10 m/min Belt speed control: Infrared via belt loop Working direction: left to right Belt inlet: left Measuring device: digital Roller mill adjustment: motorized Quick-change device: manual Engines Straightening machine drive: 5, kW drive at 3000 rpm Oil pump: 0.06 kW power at 1300 rpm Roller mill adjustment: 0.15/0.6 kW at 81/344 rpm Total drive power: 10 kW Voltage: 380 V Weight 6 t Unwinding reel type 300.2 Load capacity: 2 x 300 kp Width: 80 mm Spread: manual Spreading range: 750 - 1050 mm Coil outer diameter 1200 mm Brake: Disc brake / pneumatic Page shift: manual Panning: manual HK 120 upright straightening ma ...

welding table, straightening table, straightening flap, work table, clamping table straightening plate, straightening table PAGUS 2000 x 680 mm height: 840 mm Dimensions: 2000 x 700 x 850 mm

Welding table, straightening table, straightening flap, work table, clamping table straightening plate, straightening table, spotting plate PAGUS Working surface: 640 x 635 mm height: 145 mm used, tested ! Dimensions: 640 x 635 mm x 145 mm

Welding table, straightening table, straightening flap, work table, clamping table straightening plate, straightening table, spotting plate PAGUS working surface: 400 x 400 mm height: 100 mm used, tested ! Dimensions: 400 x 400 x 100 mm

Welding table, straightening table, straightening pad, work table, clamping table straightening plate, straightening table, spotting plate PAGUS Working surface: 395 x 195 mm height: 80 mm used, tested ! Dimensions: 395 x 195 x 800 mm

Welding table, straightening table, straightening flap, work table, clamping table, straightening plate, straightening table, spotting plate PAGUS Working surface: 205 x 205 mm height: 85 mm used, tested ! Dimensions: 410 x 205 x 85 mm

Welding table, straightening table, straightening pad, working table, clamping table straightening plate, straightening table, spotting plate PAGUS Working surface: 200 x 200 mm height: 80 mm used, tested ! Dimensions: 390 x 200 x 100 mm

Welding table, straightening table, straightening pad, work table, clamping table straightening plate, straightening table, spotting plate PAGUS Working surface: 300 x 300 mm height: 100 mm used, tested ! Dimensions: 300 x 300 x 100 mm

Welding table, straightening table, straightening pad, work table, clamping table straightening plate, straightening table, spotting plate PAGUS Working surface: 300 x 300 mm height: 100 mm used, tested ! Dimensions: 300 x 300 x 100 mm

Welding table, straightening table, straightening pad, work table, clamping table straightening plate, straightening table, spotting plate PAGUS Working surface: 300 x 300 mm height: 90 mm used, tested ! Dimensions: 300 x 300 x 90 mm

Welding table, straightening table, straightening flap, work table, clamping table straightening plate, straightening table, spotting plate PAGUS Working surface: 630 x 630 mm height: 140 mm used, tested ! Dimensions: 630 x 630 x 140 mm

Welding table, straightening table, straightening pad, work table, clamping table, straightening plate, straightening table, spotting plate PAGUS Working surface: 640 x 635 mm height: 110 mm used, tested ! Dimensions: 640 x 635 x 110 mm

Welding table, straightening table, straightening pad, work table, clamping table, straightening plate, straightening table, spotting plate PAGUS Working surface: 500 x 400 mm height: 70 mm used, tested ! Dimensions: 500 x 400 x 70 mm

Welding table, straightening table, straightening pad, work table, clamping table, straightening plate, straightening table, spotting plate PAGUS Working surface: 630 x 400 mm height: 150 mm used, tested ! Dimensions: 630 x 400 x 150 mm

Welding table, straightening table, straightening pad, work table, clamping table straightening plate, straightening table, spotting plate PAGUS Working surface: 630 x 400 mm height: 130 mm used, tested ! Dimensions: 630 x 400 x 130 mm

Welding table, straightening table, straightening flap, work table, clamping table straightening plate, straightening table, spotting plate PAGUS Working surface: 500 x 500 mm height: 120 mm used, tested ! Dimensions: 500 x 500 x 120 mm

Welding table, straightening table, straightening pad, work table, clamping table straightening plate, straightening table, spotting plate PAGUS Working surface: 600 x 600 mm height: 140 mm used, tested ! Dimensions: 600 x 600 x 140 mm

Welding table, straightening table, straightening flap, work table, clamping table, straightening plate, straightening table, spotting plate PAGUS Working surface: 800 x 630 mm height: 170 mm used, tested ! Dimensions: 800 x 630 x 170 mm

welding table, straightening table, straightening flap, work table, clamping table straightening plate, straightening table PAGUS Working surface: 1600 x 1000 mm height: 770 mm used, tested ! Dimensions: 1620 x 1010 x 800 mm

Welding table, straightening table, straightening flap, work table, clamping table Straightening plate, straightening table, with base PAGUS Working surface: 800 x 630 mm height: 950 mm used, tested ! Dimensions: 800 x 630 x 950 mm

Welding table, straightening table, straightening pad, work table, clamping table straightening plate, straightening table PAGUS working surface: 1500 x 1000 mm working height: 840 mm used, tested ! Dimensions: 1500 x 1000 x 840 mm

Welding table, straightening table, straightening pad, work table, clamping table Straightening plate, Straightening table PAGUS Working surface: 1800 x 800 mm Plate thickness: approx. 50 mm Working height: 900 mm Plate lies on wooden frame used, tested Dimensions: 1800 x 800 x 900 mm

Welding table, straightening table, straightening pad, work table, clamping table straightening plate, straightening table, spotting plate HAHN & KOLB, IFA ASCA Working surface: 400 x 400 mm DIN 876 height: 100 mm used, tested ! Dimensions: 400 x 400 x 100 mm

Welding table, straightening table, straightening flap, work table, clamping table straightening plate, straightening table with hand lever scissors PAGUS working surface: 1500 x 1000 mm plate thickness approx. 50 mm height: 820 mm < br /> Hand lever scissors PEDDINGHAUS 4 BR 8 Snow capacity: 8 mm flat steel used, checked! Top condition ! Dimensions: 1500 x 1000 x 1200 mm

Welding table, straightening table, straightening pad, work table, clamping table straightening plate, straightening table PAGUS 510 x 510 x 60 mm working surface: 510 x 510 mm height: 60 mm used, tested ! Dimensions: 510 x 510 x 60 mm

Welding table, straightening table, straightening flap, work table, clamping table straightening plate, straightening table PAGUS 800 x 630 x 170 mm working surface: 800 x 630 mm height: 170 mm used, tested ! Dimensions: 800 x 630 x 170 mm

Welding table, straightening table, straightening pad, work table, clamping table straightening plate, straightening table, spotting plate PAGUS working surface: 410 x 410 mm height: 105 mm Heavy version Dimensions: 410 x 410 x 105 mm

Welding table, straightening table, straightening flap, work table, clamping table straightening plate, straightening table, spotting plate PAGUS working surface: 800 x 630 mm height: 170 mm used, tested ! Dimensions: 800 x 630 mm x 170 mm

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Straightening Plate, Straightening Table PAGUS Work surface: 250 x 250 mm Height: 85 mm used, tested ! Dimensions: 250 x 250 x 85 mm

Straightening machine, wire straightening machine, decoiler Straightening machine combination, decoiler, wire decoiler -Wire straightener: combination of decoiler and straightener -Type: unfortunately no type designation / techn. documentation -Motor: Fukota 1.5 kw -Straightening rollers: for Ø 20 mm, see photos -Take-up rolls: Ø 152/215 x 1330 mm -Total dimensions: 3040/2450/H2525 mm -Weight: 2080 kg

Container turning device, welding turning device, roller block, rotators, pipe straightening system, shaft straightening system -Pipe straightening system for: Flame straightening steel pipes or shafts with flame and water cooling -Drainage channel and water pump -2x: counter holder prism -Counter bearing: adjustable -Dimensions: 4000/870/H810 mm -Own weight: 500 kg

Description: No.1 'HS 12 H Serial No.2337' - Automatic machine for straightening and cutting round metal wires smooth and ribbed from mm. 4 to 12, with hydraulic and flying shear cutting: with straightening system with 3-speed rotating body, obtainable by selecting the stepped pulley: with electric motor of 22KW, with soft starter for smooth starting, with 6 pairs of conveyor rollers, pressure pneumatic, for a forward speed of 30/150 mt./min., with hydraulic power unit with oil accumulation with 5.5 KW motor for fast and precise cutting. Complete with 2 sets of straightening units for quick change of cast iron jaws, set of conveyor rollers from mm. 4 to 12 and pre-selection piece counter.  Mt. 4 pallet  Nr. 1 FS-type decoiler, bell carrier with pneumatic and hand brake  Nr. 1 Bell for rolls of int. diam. Of cm. 44/78  Nr. 2 straightening units each complete with 3 cast iron j ...

sheet width:2000 mm plate thickness:1.8 mm Controls:SIEMENS S7 PRESS DESIGN:. - frame design : H-frame :. - openings in uprights : yes :. - opening in table : yes :. - moving bolster : yes :. PRESS TABLE:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - height above floor level:375 mm RAM:. - ram force:800 to - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - stroke:350 mm - number of strokes max:55 /min RAM (MECHAN. PRESS):. - ram adjustment:350 mm TOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):1100 mm - distance between columns (H-frame):3100 mm - Free passage between side columns (width):2560 mm - Free passage between side columns (height):1500 mm DECOILER:. - design : single coil :. - sheet width max:2000 mm - sheet width (min):400 mm - max. weight of coil:30 to - max. diamet ...

Hydr. Shaft straightening machine / shaft straightening press make SAUER & Sohn Dieburg type DR 15/4000 NAStraightening force at 6 bar air pressure: 15 tfor workpiece length up to: 4000 mmWorkpiece diameter: 80 mmWorkpiece cross-section flat max.: 5000 mm2Center shafts max.: 2000 mm2unzentr. Shafts max.: 2000 mm2Stroke of the straightening punch: 30 mmWeight: 800 kgOutside dimensions approx.: 4300 x 700 x 1500 mmWith- a lot of accessoriesused, good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Rolling, feeding and straightening machine make SCHLEICHER type RMS 8 - 53/160 - 1050Year of construction 1985Bandwidth: 250 - 90 mmStrip thickness: 0.5 - 0.8 mmDrive power: 7.7 kWNumber of Straightening Rollers: 8Diameter of straightening rollers: 53 mmWith- loop controlused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Used Zollern BHW straightening machine Straightening machine RM100 Jaw width 400mm Max clamping width (jaws on the outside) 820mm Hydraulic agregat Rexroth With drip tray for hydraulic agregat Bake with 3 sets Total dimensions only straightening machine 160cm Depth 60cm Height 90cm Total weight approx. 500kg Fully functional. Condition see pictures Viewing and pick-up possible Shipping Germany (without islands) 140,00 Euro net The goods can be viewed at the location 59379 Selm by appointment. Company Michael Bergau Tel. 0152/29500504 You will receive an invoice with VAT shown. Payment: Payment by bank transfer before delivery of the goods. Or cash payment on collection.

Welding table, straightening table, straightening flap, work table, clamping table Straightening plate PAGUS 1000 x 800 mm without feet Dimensions: 1000 x 800 x 250 mm

Welding table, straightening table, straightening flap, work table, clamping table Straightening plate PAGUS 1000 x 630 mm height: 860 mm Dimensions: 1000 x 630 x 860 mm

material width: 350 mm coil weight: 500 kg material thickness: mm coil external diameter: 1000 mm no. of straightening rolls: 9 straightening roll diameter: 45 mm speed: m/min power requirement: 9 kW Weight: - t Dimensions (WxDxH): - m Decoiler and straightener on one base plate - Straightening machine - decoiler - Control panel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Straightening Plate PAGUS Work surface: 600 x 400 mm Height: 95 mm used, tested ! Dimensions: 600 x 400 x 100 mm

Container turning device, welding turning device, roller block, rotators, pipe straightening system -Pipe straightening system for: steel pipes, with flame and water cooling flame straightening -Drainage channel and water pump -Roll diameter: Ø 180 mm -Drive: PIV gearbox -electric: adjustable -Load capacity: 1 to -Speed: min. 50 mm/min -Speed: max. 150 mm/min -Hand switch -Counter bearing: laterally adjustable -Dimensions drive: 3600/820/H850 mm -Dimensions counter bearing: 2950/820/H850 mm -Own weight: 1300 kg