store automatic used for sale

WHEELED TANKER TRUCKS LOADING SYSTEM, for plastic granules, Loading speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1.000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper, Discharge height 4,5 m.from floor, Screw length 8.300 mm, The screw can be lowered for storage, The bearings are dust-tight ...

SEMI-AUTOMATIC, NON-STOP SCREENCHANGER, Screen Ø 30 to 400 mm. Can fit any type of extruders with single or twin screws Made in sturdy steel on supporting wheeled cart for easy transport Smart construction out of our long experience in plastic extrusion Complete with control panel for temperature and pressure management Hydraulic power pack Connection flanges available on given design of pelletizer and extruder Single drawer with 2 sliding breakers (available also double/4 breakers), when asking for a quotation, please detail:, - Type of extruder, - screw (s) diameter, - production rate in kg/h, - material tyupe, - material MFI, - contamination and average %, - filtration required in mesh or my, type: Semi-automatic, non-stop

TANKER TRUCK LOADING SYSTEM, for plastic granules, Maximum speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1,000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper at a rate of 60 m3 per hour, the 300 mm.Ø screw can be lifted and lowered to easily move inside and outside., Maximum discharge heig ...

TANKER TRUCK LOADING SYSTEM, for plastic granules, Loading speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1.000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper, Discharge fixed height 4,5 m.from floor (or bespoke), Screw length 8.300 mm, The bearings are dust-tight and automatically greased., ...

cutting diameter: 520 mm saw band length: 7239 mm cutting width: 1,3 mm Control: POSIMOD cutting range - square -: 520 x 520 mm feed length: 500 mm feed length: multiple: 4500 mm min. cut-off length: 6 mm length of rest piece min/max: 10 / 100 mm cutting speed: 20 - 130 m/min dimensions of saw-band: 7239 x 50 x 1,3 mm sawing motor: 5,5 kW total power requirement: 10,0 kW weight of the machine ca.: 3,8 t dimensions of machine L x W x H: 3,42 x 2,30 x 2,40 m - 2 column guided - Accessories: roller track 2500 mm length, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic Signature Punching Machine / Automatische Stanzmaschine JAMES BURN Lhermite EM 520 Baujahr / Year 1998 - Serial-No. 211661 Format Einlaufbreite / Size Infeed width 520mm Materialdicke / Thickness max. 3mm (32 pages 80 gr) Geschwindigkeit / Speed max. 10.000cycles/h Papierstärke / Paper thickness 70 to 300 gr.  James Burn Lhermite EM520 is an Automatic Signature Punching Machine.  It can be used for inline or offline production. With Feeder and Jogger delivery. The EM520 features the state of the art modular system for  punching and cutting signatures in line 

Winkelschweißmaschine / Semi-Automatic Foil sealing machine Kallfass KC 8060/650

Halbautomatischer Stanztiegel / Automatic Platen Die Cutter ETERNA ML 930 GII Year 2008 - Serial-No. EP51568 Format 670 x 930mm Weight 2800kgs Included frame and tools, very good condition

Halbautomatischer Stanztiegel / Automatic Platen Die Cutter Joh. Cietz PRESTO Year 2008 - Serial-No. EP51568 Format 370 x 480mm Weight 1100kgs Included frame and tools

Fully Automatic Banding Delivery Palamides BA700

Manufacturer: Joysonquin Ningbo Model: Tesla Model Y Clip Machine Year of Manufacture: 2023 Type of Machine : Electrical Specifications: - Voltage: 3x400V AC / N / PE - Frequency: 50Hz - Power: 15 kVA - FLC (Full Load Current): 40A Air Requirements: - Pressure: 6 bar - Consumption: 800 L/min Weight: 2500 kg Remarks: Machine equipped with two KUKA robots: KR 10 R1100-2, One partially disassembled for spare parts Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Infinite Technologies & Robotics Model: SJ2020R0C0001-MP05 Year of Manufacture: 2020 Name of Machine : G2Y Clips Mounting Machine Voltage: 380V Current: 8A Power: 4 kW Weight: 3 Tons Certification: CE marked Find more here - .ucymachines/ Contact us at - sales@ucymachines

cutting diameter: 340 mm dimensions of saw-blade: 4860 x 32 x 1,1 mm cutting range square: 340 x 340 mm cutting speed: 17 - 120 m/min drive motor: 4 kW weight of the machine ca.: 2,5 t dimensions: ca. 2600 x 2600 x 1650 mm ncl. chip conveyor and chip tray Hydraulic bundle clamping device incl. electrical circuit diagrams the previous owner only sawed at one speed Adjustable cutting pressure valve HSS bimetal saw band Hydraulic material and saw band tensioning with electrical monitoring Automatic height adjustment of the saw frame Automatic adjustment of the movable band guide arm Electrical piece counter Digital display of the dimension preselection Constant, hydraulic clamping of the carbide band guides The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X-axis travel mm: 260 Z-axis travel mm: 590 B-axis travel mm: 624 Turning length mm: 515 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 923.8 Swing over cross-slide mm: 755 Bar work capacity mm: 52 Upper turret Number of tool slots St .: 16 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5/5.5/3.7 (3min/5min/cont) Indexing time s: 0.25 Main spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 61 Chuck type: Hollow Chuck (6") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 43 Chuck type: Hollow Chuck (6") Manufacturer: KITAGAWA Coolant system Tank capacity liter: 235 Equipment Chip conveyor Signal lamp High pressure pump Chuck foot switch (double) for main and counter spindle Interface for ...

Inv. Num. : 8535 Type: TNL 18P Producer: TRAUB Created: 2013 Parameters: Control system: TRAUB SYSTEM TX 8i-p Max. rod diameter: 20 mm Maximum turning length: 180 mm Number of Spindles: 2 pieces Maximum spindle speed: 8000 1/min Length: 2500 mm Width: 1460 mm Height: 2250 mm Weight: 4000 kg Equipment: Bar Feeder

Semi-automatic bending, pipe bending machine, mandrel bending machine MOBITEC type BAH 1-2KOTTMANN and BERGER GmbHFabr. No. 056 Year of construction 09/2004- for simultaneous bending of two pipe sections made of steel up to 12 mmBending angle max. 90Pipe diameter max. 12mmMandrel length approx. 65 mmNominal power 3.5 kWDreturn air max. 6 bar / approx. 1 litre per bending cycleMains connection 400 volts, 50 Hz- Pneumatic clamping- Pneumatic mandrel retraction- Control for angle input via STOBER Controlbox Series 4000/5000- Control SIEMENS

Eccentric punching machine HAULICK + ROOS type RVD 125Double column - Eccentric pressMasch. No. 212560 Year of construction 1981Compressive force 125 ton. Table size 880 x 800 mmTable opening 470 x 140 mmStand width 900 mmStand width laterally 415 mmRam stroke 45 mmRam adjustment range 0-80 mmInstallation height in the picture 340 mmStroke rate 50 to 300 strokes/min. Engine power main drive 22 kWNe-connection 380 Volt, 50 Hz- Double connecting rod engine with 4-bearing eccentric shaft for off-center tappet pressure

Pallet feeder 4 buckles Batch counter Anti-noise hood MBO Z2 knife Palamides Alpha 500 delivery (year 2005)

Roaches 3 Bath Laboratory Dyeing Machine Roaches 3 Bath Laboratory Dyeing Machine 400 V 6600 W 10 A HxWxD= 920 x 1760 x 450 mm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Key data: 1060 mm

Band saw Kasto HBA 10×12 built in 2007 Cutting areas: Cutting range around 1,060 mm Square cutting area 1,060 x 1,060 mm Cutting area flat 1,060 x 1,260 mm Clamping range 300 – 1,260 mm Smallest dimension to be sawn approx. Ø 300 mm Smallest section length 10 mm Minimum offcut length single cut 20 mm Minimum off-piece length automatic operation 100 mm Table load maximum 50to Travel table 6100mm Total drive power 20 kW Saw motor 11 kW Continuous cutting speed at 50 and 60 Hz 12 – 90 m/min Automatic feed length single 2,100 mm Clamping force machine vise 50,000 N Saw blade dimensions 11,430 x 80 x 1.6 mm Cutting feed: infinitely variable Material feed: hydraulic Material tension: hydraulic Saw blade guide: carbide, replaceable Saw blade tension: hydraulic Saw blade cleaning: by easily replaceable brush, motor-driven ...

Offer 25286 Specifications: - Saw blade dimensions 400 x 35 x 2.0 mm - Cutting range - 90° round approx. 252 mm - flat approx. 250 x 160 mm - Square approx. 210 x 210 mm - 45° round approx. 160 mm - Flat approx. 150 x 150 mm - Material replenishment machine - max. opening width of the vise 265 mm - mitre-adjustable vise - Coolant device - Drive 400 V / 0.65 / 1.6 kW - Space requirement approx. W 1400 x H 950 x D 1700 mm - Weight approx. 600 kg

Mori Say TM626 AC, - 5 axial slides, - 4 cross slides, - double slide pos. 6, - pickup spindle, - swarf conveyor with vibrating filter device, - high pressure coolant system, - set of tool holders, - IEMCA PRA auto bar loader L = 3 m, Country of origin: Czech Republic, Operating hours: 30.500h - (in date 29/07/2025), Number of spindles: 6, Max bar diameter [mm]: 26, Spindle speed [rpm]: 500 - 6.000, Spindle motor [kW]: 20, Total power requirement [kVA]: 40, Weight of the machine ca. [kg]: 5.500, Auto bar loader: bar stock carrier for barlengts 3 meter

Used IWKA TFS 20 aluminum tube filling machine. Year of manufacture: 1989 Capacity: 40-120 tubes/minute Aluminum tube diameter: 10-52mm Supported dose: 2.5-500ml

cutting diameter: 280 mm saw band length: 4930 mm capacity 90 degrees: square: 280 x 280 mm capacity 45 degrees: round: 280 mm capacity 45 degrees: square: 280 x 280 mm capacity 60 degrees: round: 220 mm capacity 60 degrees: square: 200 x 200 mm feed length: 600 mm feed length: multiple: 5400 mm cutting speed: 17 - 90 m/min length of rest piece min/max: min. 30 mm saw diameter: min. 10 mm control: KASTO, Compact Control total power requirement: 5 kW weight of the machine ca.: 1,75 t dimensions of machine L x W x H: 2,68 x 2,54 x 1,59 m Accessories: coolant, roller track 3300 mm length, 300 mm width, roller track 1350 mm length, 300 mm width The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 400 mm

What is sold is a Machine name: Automatic band saw Manufacturer: Bomar Model: CLS 800.400 Year of construction: 2017 Condition: defective relay Dimensions: 3850 x 1650 x 2250 mm Weight: 2800 kg A relay on the machine is defective and can be replaced if desired.

Series F2 4-part system: 4 tools engaged at the same time 15 axes System 1: 5 swivels 12 x 12 mm System 2: 8 driven tools (turret system 4) System 3: 16 tools (up to 16 of which are driven) System 4: 8 driven tools (tool turret system 4) C-axis on main spindle + 5° mechanical indexing C-axis on sub-spindle + 5° mechanical indexing up to 37 tools (32 driven)

3-part system: 3 tools engaged at the same time 12 axes 4-fold transverse machining up to 35 tools (26 driven) System 1: 6 turnings 12 x 12 mm or 5 x 16 x 16 mm, 4 driven tools transverse System 2: Y2 axle at the back (3 fixed + 6 driven tools) System 3: 2 x 8 station turrets with up to 16 driven tools C-axis on main spindle + 5° mechanical indexing C-axis on sub-spindle + 5° mechanical indexing C-axis on turret + freely programmable angle adjustment

Built in 1993 semi-automatic hot stamping press Embossing format max. 125 x 280 mm electr. Drive 1 foil preference 1 heating plate automatic feed Unwinding device for round materials / cans Underframe Delivery date: immediately from stock Price on request. We supply and install worldwide.

Offer 25230 Specifications: - Automatic workflow cutting process, hydr. Lifting / lowering - of the saw frame, mitre adjustment with hydr. Clamping - Automatic material replenishment machine, mot. Mitre adjustment - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely adjustable 15 - 150 m/min - Cutting pressure regulation infinitely variable 10 - 15 bar - Lowering speed 0 - 300 m/min - Cutting range 90 ° - at 90° around 335 mm - Square flat 500 x 335 mm - Automatic material replenishment machine 5 - 2300 mm - Drive 400 V / 6.5 kW - Space requirement approx. W 2400 x H 1950 x D 2200 mm - Weight approx. 1800 kg

A precision glass grinding machine Carl Zeiss for pre-grinding optical workpieces is available. Workpiece spindle speed: 125rpm, tool spindle speed: 7000rpm, feed: 6mm/min, roundness and flatness accuracy: +/-0.005mm, swivel range: 50°, permissible repeatability: +/-0.01mm, measured repeatability (1990): +/-0.005mm. Documentation available. An on-site inspection is possible.

on behalf of a customer GUK Folding Machine FA 21/4 Cartonac 2000-2 further information on request

Number of spindles 8 Max. bar feed in one station: 130 mm Max. bar feed in two stations: 260 mm Max. stroke radial slide: 52 mm Radial slide adjustment: +- 12 mm Max. stroke axial slide: 72 mm Max. stroke tool spindles: 106 mm Adjustment of tool spindles: +- 10 mm Main spindle speed: 500 - 4,000 1/min Piece time: 2 - 80 s Number of tool positions: 18 Weight: 12,600 kg

Welding dimensions: 1170x900mm, max. product height: 200mm, film: PO, PE and PVC, half-tube film, max. film roll dimensions: 1050x250mm, connected load: 23KW, length: 2640mm, width: 2850mm, height: 1220mm, weight: 600kg. Comes with documentation, shrink tunnel, two conveyor belts and film. The machine has been used very little, only ran for a few hours. An on-site inspection is possible, the machine is immediately available.

OZGENC MAKINA SL 500C automatic circular sawing machine was built in 2019 in Turkey by M.S.K. MOTOR KOMP. MAKINA SAN. TIC. LTD. ŞTI. The first launch took place in 2020 and the machine was in operation for about two years since then. The SL 500C circular sawing machine is designed for cutting aluminium profiles at an angle of 90°. It offers unprecedented efficiency and cutting precision thanks to the use of a high-quality, 500 mm diameter diamond saw, whose feed is adjusted by reliable servomotors. What’s more, the touchscreen operator panel with PLC controller significantly simplifies the operation of the machine by providing the user with the necessary information and the ability to quickly program work cycles. The OZGENC MAKINA aluminium sawing machine weighs 310 kg. Technical specifications of the OZGENC MAKINA SL 500C aluminium circular sawing machine - cutting angle: 90 ...

The machine is in good technical condition, after prior agreement it is possible to test it. Control system: Fanuc Max. turning diameter: ø65mm Max. workpiece length: 300mm Turret head: 2x12 driven positions Bar feeder: IEMCA master 880 MP Cooling + chip conveyor

cutting diameter: 350 mm saw band length: 4160 x 34 x 1,1 mm cutting width: 350 mm cutting capacity - flat: 400 x350 / 90° mm cutting capacity - flat: 400 x 350 / 30° mm cutting capacity - flat: 290 x 300 / 45° mm cutting capacity - round: 350 / 90° mm cutting capacity - round: 320 / 30° mm cutting capacity - round: 320 / 45° mm feeds - fine adjustment: 20-100 mm hydraulic motor: 0,37 kW coolant pump AC: 0,12 kW drive motor: 2,2 kW total power requirement: 2,7 kW weight of the machine ca.: 1,05 t dimensions of the machine ca.: 2100 x 1300 x 850 m Accessories : automatic sawing functions, hydraulic clamping, material feed via driven rollers, pneum. adjustable lowering speed, sawing programs adjustable via touch screen, EU quality and CE standards, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 230 mm capacity 90 degrees: flat: 230 x 230 mm capacity 90 degrees: square: 230 x 230 mm vice: 235 mm turning speed range:: 15 - 100 m/min dimensions of saw-band: 2950 x 27 x 0.9 mm Control: MEP CNC total power requirement: 3.18 kW weight of the machine ca.: 1175 kg dimensions of the machine ca.: 1980 x 1105 mm Automatic two-column band saw with a footprint of only 2.5 square meters Highest performance in the smallest space Features : - powerful CNC automatic band saw in two-column design for cuts at 0° - with Windows-CE based touch screen control 5.0 - 180° tiltable control panel Up to 100 cutting programs, each with different quantities and lengths Minimizes programming time for frequently executed jobs - 2x operating modes (semi-automatic and automatic) enable efficient cutting under all conditions - Saw head feed via linear guides driven by hydraulic cyli ...

saw blade diameter: 350 x 32 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 x 105 mm capacity 90 degrees: flat: 180 x 70 mm capacity 45 degrees: round: 120 / 110 mm capacity 45 degrees: square: 100x100 / 95x95 mm capacity 45 degrees: flat: 135 x 60 mm turning speeds: 1700 / 3400 U/min Control: MEP CNC total power requirement: 2.6 / 3.5 kW weight of the machine ca.: 605 kg range L-W-H: 2210 x 1680 x 2150 mm Features: - Semi-automatic high-performance circular saw For cuts from 45° right to 45° left In aluminum and light metal alloys - MEP microprocessor control Simple user interface with display and mechanical buttons Start and end positions of the saw head can be saved - Manually opened safety cover - Mechanical stops at -45°, +0°, and +45° Enable quick positioning of the saw head - Pneumatic vise with quick-release clamp Pneumatic clamping system allow ...

Canapa SAP 8 LA strapping machine Fully automatic strapping machine With integrated transport system - photocell-controlled In the SAP-8A/LA fully automatic machines, photocells detect the beginning and end of the package, control the transport unit (driven rollers or belts) and trigger the strapping process. More items - new and used - can be found in our shop! International shipping costs on request!

Fully automatic sheet dispenser PAL-Cut 800 The Palcut 800 cuts paper quickly and precisely into intermediate sheets of the desired length, directly from the roll. Fully automatic sheeter PAL-Cut 800 sheet dispenser, which cuts intermediate layers quickly and precisely in the desired length. The sheet dispenser is suitable for continuous operation in an automatic palletizing system and for companies with high sheet consumption. The Palcut 800 works with rollers of max. 800 mm width. Type designation: PAL-Cut 800 Length: 1853 mm Width: 1380 Height: 1739 for roll width up to: 800 mm Mounting height: 1,368 mm Working speed: 480 pcs/h Power connection: 220 V, 0.18 kW Operating mode: fully automatic Weight: 370 kg Link PAL-Cut 800 More items - new and used - can be found in our shop! International shipping costs on request!

GUK FA 21/4 S2 SVA/730 stand-alone leaflet folding machine, 4 folding pockets, sheet format unfolded: min. 60 x 90 mm, max. 215 x 320 mm, smallest folding 15 mm, recommended paper weight 50-70 g/m², automatic drum suction feeder SVA/730, PCE barcode reader, double sheet control, output up to 460 folds/min., infinitely variable drive, electrical connection 400V/3Ph/50Hz, rated power consumption 1.76 kW, machine footprint approx. 1650 x 1075 mm (LxW), machine height approx. 1470 mm, machine net weight approx. 300 kg, machine in mobile version on wheels

Max. rod Ø 20 mm Max. machining length 165 mm Spindle speed 8,000 1/min Max. rod Ø sub-spindle 20 mm Max. speed sub-spindle 8,000 1/min Number of tools that can be used: 21 Turning Tools Multiple Chisel Holders: 6 Driven tools for transverse machining: 3 Front side drilling tool: 4 Rear drilling tool: 8 Speed driven tools: 8,000 1/min