storage pallet used for sale

Carestream (Kodak) Storage Film System Elite as Spare Parts Dispenser First processing station consisting of computer/monitor/keyboard/mouse and software 2. Workstation 5 Kodak CR cassettes PQ: 35x43 - 2 pcs./ 35x35 - 1 pcs./ 24x30 - 1 pcs./ 18x24 - 1 pcs. Barcode scanner UPS Emergency Power • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technici ...

range L-W-H: 490x310x190 mm weight max. in kg: 20 kg Temperature range: -10° +50° °C Colour: grün RAL material: PST AU Lot storage stackable by lateral and rear tongue and groove can be connected to each other approx ca. 700 pieces in Stock Packing unit: Pallet Exception, for small quantities only if you pick them up yourself in Goldenstedt. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AGFA Soeicherfoliensystem (CR System) ADC Solo MUSICA Computer TFT LCD Monitor Model No. B18XA_Bj. 2001 • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Carestream (Kodak) Storage Tray System (CR System) DirectView CR 500 (untested) First processing station consisting of computer/monitor/keyboard/mouse Diagnostic workstation 4 Kodak CR cassettes • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

AGFA Storage Film System (CR) CR 85-X (mammogenic) with: First Processing Station 6 AGFA CR MM 3.0 Mammo cassettes: 18x24 - 2 pcs./ 24x30 - 4 pcs. • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

range L-W-H: 538 x 475 x 300 mm internal dimension: 450 x 448 x 300 mm material: verzinkt as good as new with some storage marks The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Konica Minolta Storage Film System (CR) Regius 190 (mammogenic) with: First Processing Station • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Carestream Storage Sheet System (CR) DirectView CR 975 with: 2x control panel 24 cassettes: 18x24 - 7pcs./ 24x30 - 8 pcs./ 35x43 - 9pcs. • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Konica Minolta Storage Film System (CR) Regius Sigma II with: First Processing Station 5 RC-300 CR cassettes: 18x24 - 1 pcs./ 24x30 - 2 pcs./ 35x43 - 2 pcs. • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Used storage tanks VARIBOX - 1.000 L - double-walled - with plug-in system and recesses for forklifts - Capacity: 1,000 L -Plastic - tested and cleaned - for diesel, oil or other liquids Discount possible for higher quantities. Inspection and shipping costs after consultation.

weight of the machine ca.: 14,2 kg dimensions of the machine ca.: 22 x 24 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heating oil tank - tank system - steel tank - diesel storage brand new - 100m³ capacity - according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick closure, 1 vent pipe with vent hood, 1 brand-new limit value transmitter with type approval (AIII), 1 ladder and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage fluid. The container is completely repainted - RAL 7011 iron grey. (Other RAL colours are also possible on request!) L = approx. 15.80 m - D = 2.90 m - weight approx. 19.0 to. - ex works, freely charged - (For transport reasons, dome covers an ...

P332 - used approx. 81.6 m³ / 81,600 ltr PE100 tank, plastic tank, flat bottom tank, single-walled. technical details: capacity: approx. 81.6 m³ / 81,600 litres material: PE100 tank, plastic tank manufacturer: Weber Kunststofftechnik year of construction: 2016 dimensions: approx. Ø 4.00 m × approx. H 7.00 m specific weight: at least 1.0 kg/ltr Used PE100 tank, professionally cleaned and in great condition, almost as new, some are completely unused. Single-walled, above-ground storage tank, standing on flat floor. Lid on top of the roof and on the tank wall, several inlets and outlets, impervious to light. Former water tank, suitable for many different media. Price upon request. Transport can be arranged at low cost. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been ...

Stock# U2422-2 Used vertical stainless steel AISI 316L aseptic pressure storage tank with a total capacity of 830 l by Schwarte-Milfor Sp. z o. o. (Poland) type Mieszalnik procesowy. Tank has a working volume of 700 l and is designed to operate at pressures ranging from -1 to 4 bar and temperatures up to 150 C. The heating and cooling jacket made of stainless steel AISI 304 has a capacity of 152 l and is designed to operate at pressures ranging from -1 to 3 bar and temperature up to 150 C. The jacket is insulated with mineral wool and clad with AISI 304 stainless steel sheet. Internal dimensions: diameter 850 mm, length of straight wall line 1,200 mm. The tank has a welded dished top equipped with an inspection manway with an internal diameter of 450 mm and 9 stub pipes with mounted accessories. The tank has a welded dished bottom head equipped with a central outlet with a NovAseptic  ...

17,000 LITRE STORAGE TANK/WINE TANK, RIEGER, UPRIGHT MADE OF V2A https://eurolux.de/product/24-0513euba-17000-liter-lagertankweintank-r ieger-stehend-aus-v2a MJ UNI-RILL Tank top floor: Sloping floor with 3 % floor slope 4 reinforcement profiles 2 crane eyelets Threaded socket DN65 reduced to DN50 central downward drawn CIP cable DN50 connection DN 50 front Cylinder: Level indicator with strip and scale Tasting tap DN25 Clear drain with angled seat valve DN 50 Tank underbody: Cone bottom with residual drain pipe pulled forward in the middle with disc valve DN 50 tank wall 4 feet with domes - height adjustable with washers

52,700 LITRE WINE TANK / STORAGE TANK, EXTINGUISHING WATER TANK, ROUND, MADE OF STEEL https://eurolux.de/product/24-0504euba-52700-liter-weintank-lagertank- loschwassertank-rund-aus-stahl MJ UNI-RILL Surface coated on the inside, food-safe Volume 52700 L Steel as a material Total height 9700 mm Cylinder height 9100 mm Diameter 2700 mm Vertical design Last Use Food Tank top floor: arched bottom 2 crane eyelets Nozzle DN50 Cylinder: Manhole Ø 410 x 310 mm oval Tasting tap DN15 Clear drain DN50 Tank underbody: Flat bottom with 3 % slope with outlet beading pulled forward with reduction to DN 50

9,500 LITRE STORAGE TANK/WINE TANK MADE OF V2A, WITH STURDY FRAME FRAME, LONG OVAL https://eurolux.de/product/24-0505euba-9500-liter-lagertank-weintank-a us-v2a-mit-stabilem-rahmegestell-langovalliegend Specifications Surface inside 2B=IIIC sanded Surface marbled on the outside Material V2A (AISI 304) 1.4301 Width 1730 mm Total height 2750 mm Depth 3700 mm Oval-horizontal design Number of feet 4 Last Use Food AS UNI-RILL Front: Level indicator with strip and scale (connection) Manhole oval 400 x 350 mm Tasting tap 1/2" Airlock DN 50 Clear drain DN 50 Residual drain DN 50 height-adjustable feet with domes and washers

120,000 liters extinguishing water tank/storage tank/steel tanks/water cisterns Storage tanks/ steel tanks/ extinguishing water tanks/ water cisterns with red food-safe coin coating Capacity: 120,000 litres UNI-BWK Cat. No. 24-0579EUBA Link to product: https://eurolux.de/product/24-0579euba-120000-liter-loschwassertanklag ertankstahltankswasserzisternen Dimensions and weight: Ges. Height: 17,200 mm cyl. Height: 15,230 mm Diameter: 3,100 mm Topsoil: With curved bottom With 4 crane eyes With 2 connection sleeves 1" With 1 connection sleeve 2" With central flange DN 150 With manhole DN 200 With 1 retaining tab for running platform Cylinder: With manhole 430 x 340 mm with swing cover with bracket With Temperature Gauge Nipple 1" With Sample Tap Nipple 1" With clear drain DN 65 Subsoil: With curved bottom With outlet pipe DN With ...

P311 - used approx. 110 m³ / 110,000 L GF-UP tank, standing on stand frame or horizontal, with chemical protective layer. Technical details: Capacity: approx. 110 m³ / 110,000 litres Material: glass fibre reinforced plastic, GF-UP Manafacture: Reich-Tank Year of construction: 2005 DIBT bauaufsichtl. Approval: Z-40-11-117 Specific gravity: min. 1.06 kg/L Dimensions: Ø approx. 3.00 m × H total approx. 19.05 m Other: Used tank made of glass fibre reinforced plastic / GF-UP, with inner chemical protective layer, professionally cleaned and in good condition. Standing, above-ground storage container on stand frame, incl. ladder and roof platform, dome on the side of the tank and on top of the roof, several inlets and outlets. Former silo for the storage of biogas and 9% sulphuric acid, including container statics and expert opinion to prove suitability according to §19 g/h WH ...

85,700 litre wine tank/storage tank RSM, round, made of V2A Cat No.: 24-0149 Condition: New Pieces: 5 KK UNI-ACKER Dimensions: Overall height: 12,850 mm Diameter: 3,000 mm Sheath height: 12,000 mm Thickness: Bottom 3 mm Sheath 3-2 mm Lid 3 mm composed of: Flat floor for concrete base 3% inclined incl. ground anchoring ring in accordance with European regulations in the event of earthquakes and storms (parts of the anchor ring must be welded on site by the customer). Nozzle DN100 DIN 11.851 in the lid (for mounting light on the customer's side, light not included) Dome Ø 400 mm in 1.4404 with jointvery stable Solid door Laveggi A4 (edge thickness frame 12 mm) without swivel arm Double-jacketed laser-welded 2xh 1250x9330 à 8.75m2 with parallel connection 2" Connector Thermometer connection NW20 with sleeve Cleaning line NW 50 with connection  ...

MJ UNI-MEER                           Volume: 11850 L Material: V2A (AISI 304) 1.4301 Manufacturer: Rieger Design: cubic Number of feet: 4 Total height: 2500 mm Length: 5250 mm Width: 1450 mm Exterior surface: marbled Surface inside: IIID Last Use: Food Topsoil: Flat bottom 1 reinforcement profile in the middle 4 crane eyes Airlock DN50 Cylinder: 4 cool pockets on the side Level indicator with bar and scale Manhole oval Tasting tap Nozzle Flap Size 37 Ladder hooks Sewage drain DN50 with angled seat valve   Subsoil: Flat bottom with 3% slope forward-drawn outlet surround with disc valve DN50 4 profile feet with domes – height-adjustable  4 reinforcement profiles

54.000 Litres Storage tank with propeller mixer sideways in V2A KK UNI-ALBI Measurement: Total height: 6,500 mm Cylinder height: 4.500 mm Diameter: 3,600 mm Material: V2A Surface: Inside and outside 2B=IIIC Upper bottom: with ventilation connector with inclined cone bottom with 2 crane eyes Cylinder: with level indicator with 3 threaded connector DN 65 with manhole Ø 450x350 oval with sample tap with ladder hook with propeller mixer sideways mounted Lower bottom: with dished end with rest outlet pulled forward with butterfly valve DN65 with 5 calotte feet height adjustable

brand new - with a capacity of 10,000 litres - according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 5.30 m - D = 1.60 m - weight approx. 2.4 tons. - ex works, freely charged - We recommend: Sandblast the above container from the outside, prime and completely repaint - zinc yellow / RAL shade 1018 (see sample photo). (Other RA ...

brand new - with a capacity of 50,000 litres - according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole DN 600 with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 10.70 m - D = 2.50 m - weight approx. 9.5 tons. - ex works, freely charged - We recommend: Sandblast the above container from the outside, prime and completely repaint - white / RAL-9016 shade (sample photo). (Other RAL co ...

brand new fuel oil tank - diesel tank - storage tank with a capacity of 5,000 litres - according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 2.80 m - D = 1.60 m - weight approx. 1.5 tons. - ex works, freely charged - We recommend: Sandblast the above container from the outside, prime and completely repaint - iron gray / RAL sh ...

The scope of delivery includes: 01x Stack transport box, used Manufacturer: SSI Schaefer Type: 14/6-4 Design: recessed grip on both sides Colour: blue Material: Polypropylene External dimensions LxWxH: 210x150x123mm Inside dimensions LxW: 190x123mm Usable height in stack: 110 mm Capacity: 2.50 litres Stackable: yes Weight | pcs.: 0,266 kg Note: These are used stacking transport boxes. There may be scratches, dirt and Color errors may be present. Application: The stacking transport boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

The scope of delivery includes: 261x Stack transport box, used Manufacturer: SSI Schaefer Type: 14/6-4 Design: recessed grip on both sides Colour: blue Material: Polypropylene External dimensions LxWxH: 210x150x123mm Inside dimensions LxW: 190x123mm Usable height in stack: 110 mm Capacity: 2.50 litres Stackable: yes Weight | pcs.: 0,266 kg Weight / pallet: approx. 95.00 kg Note: These are used stacking transport boxes. There may be scratches, dirt and Color errors may be present. Application: The stacking transport boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

The scope of delivery includes: 10x stacking transport box, used Manufacturer: SSI Schaefer Type: 14/6-4 Design: recessed grip on both sides Colour: blue Material: Polypropylene External dimensions LxWxH: 210x150x123mm Inside dimensions LxW: 190x123mm Usable height in stack: 110 mm Capacity: 2.50 litres Stackable: yes Weight | pcs.: 0,266 kg Note: These are used stacking transport boxes. There may be scratches, dirt and Color errors may be present. Application: The stacking transport boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

The scope of delivery includes: 28x stacking transport box, used Manufacturer: SSI Schaefer Type: 14/6-4 Design: recessed grip on both sides Colour: blue Material: Polypropylene External dimensions LxWxH: 210x150x123mm Inside dimensions LxW: 190x123mm Usable height in stack: 110 mm Capacity: 2.50 litres Stackable: yes Weight | pcs.: 0,266 kg Note: These are used stacking transport boxes. There may be scratches, dirt and Color errors may be present. Application: The stacking transport boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

The scope of delivery includes: 56x Stack transport box, used Manufacturer: SSI Schaefer Type: 14/6-4 Design: recessed grip on both sides Colour: blue Material: Polypropylene External dimensions LxWxH: 210x150x123mm Inside dimensions LxW: 190x123mm Usable height in stack: 110 mm Capacity: 2.50 litres Stackable: yes Weight | pcs.: 0,266 kg Note: These are used stacking transport boxes. There may be scratches, dirt and Color errors may be present. Application: The stacking transport boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

The scope of delivery includes: 1.044x Stack transport box, used Manufacturer: SSI Schaefer Type: 14/6-4 Design: recessed grip on both sides Colour: blue Material: Polypropylene External dimensions LxWxH: 210x150x123mm Inside dimensions LxW: 190x123mm Usable height in stack: 110 mm Capacity: 2.50 litres Stackable: yes Weight | pcs.: 0,266 kg Weight / pallet: approx. 95.00 kg Weight / 1.044 pcs.: approx. 380,00 kg Note: These are used stacking transport boxes. There may be scratches, dirt and Color errors may be present. Application: The stacking transport boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the ...

The scope of delivery includes: 261x Stack transport box, used Manufacturer: SSI Schaefer Type: 14/6-4 Design: recessed grip on both sides Colour: blue Material: Polypropylene External dimensions LxWxH: 210x150x123mm Inside dimensions LxW: 190x123mm Usable height in stack: 110 mm Capacity: 2.50 litres Stackable: yes Weight | pcs.: 0,266 kg Weight | Pallet: approx. 95.00 kg Note: These are used stacking transport boxes. There may be scratches, dirt and Color errors may be present. Application: The stacking transport boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information on how to ship the item: - The goods are shipped free of charge throughout Germany - Island transport is excluded - Delivery is only up to the curb - For unloading, access and departure routes to the Unloading point r ...

The scope of delivery includes: 56x Stack transport box, used Manufacturer: SSI Schaefer Type: 14/6-4 Design: recessed grip on both sides Colour: blue Material: Polypropylene External dimensions LxWxH: 210x150x123mm Inside dimensions LxW: 190x123mm Usable height in stack: 110 mm Capacity: 2.50 litres Stackable: yes Weight | pcs.: 0,266 kg Weight | Package: approx. 17,00 kg Note: These are used stacking transport boxes. There may be scratches, dirt and Color errors may be present. Application: The stacking transport boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information on how to ship the item: - The goods are shipped free of charge throughout Germany - Island transport is excluded

2000 ESD open-fronted storage bins as good as new Manufacturer: UTZ Exterior dimensions : 350 x 210 x 145 mm Interior dimensions : 305 x 180 x 134 mm Material: PP conductive Side walls closed, 1 short side with opening Bottom closed 1 shell handle Colour: black Stackable Condition: Very good Negotiation price: € 6.2 net from stock Retail price per pallet: € 5.00 net from stock 121 pieces per pallet Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

800 x 600 470 mm 137 Piece(s)

800 x 600 445 mm 159 Piece(s)

Coated steel tanks Dimensions : - Depth : 1500 mm - Width : 1500 mm - Total height: 3980 mm (incl. dome) - Ground clearance: 420 mm Equipment : - Partial discharge DN 40 - Residual discharge DN 40 - Rectangular manhole 320 x 420 mm - Level indicator - Dome DN 500 mm - In perfect condition

Coated steel tanks Dimensions : - Depth : 2500 mm - Width : 1600 mm - Total height: 3980 mm (incl. dome) - Ground clearance: 420 mm Equipment : - Partial discharge DN 40 - Residual discharge DN 40 - Rectangular manhole 320 x 420 mm - Level indicator - Dome DN 500 mm - In perfect condition

Coated steel tanks Dimensions : - Depth : 2500 mm - Width : 2300 mm - Total height: 3980 mm (incl. dome) - Ground clearance: 420 mm Equipment : - Partial discharge DN 40 - Residual discharge DN 40 - Rectangular manhole 320 x 420 mm - Level indicator - Dome DN 500 mm - In perfect condition

90,000 liter storage tank/ wine tank made of V2A, vertical with flat bottom Volume 90000 L Total height 9200 mm Cylinder height 9000 mm Diameter 3600 mm Material V2A (AISI 304) 1.4301 Vertical design Previous use: Wine storage Topsoil: 2 crane eyes Folding dome DN400 with welded-in threaded nozzle NW50 front Threaded socket NW50 in the middle Sprinkler ring made of stainless steel Cylinder: Manhole swivel 340 x 440 mm Threaded Connector NW50 for Clear Drain Threaded neck NW50 for agitator 2 sleeves 1" Subsoil: Flat bottom with approx. 3% slope to the outlet and upper flat bottom with slope for ventilation Outlet nozzle NW100 On square slab 365 x 365 m

Coated steel tank Dimensions : - Depth : 2500 mm - Width : 2300 mm - Total height: 3680 mm (incl. dome) - Ground clearance: 420 mm Equipment : - Partial discharge DN 40 - Residual discharge DN 40 - Rectangular manhole 320 x 420 mm - Level indicator - Dome DN 500 mm - In perfect condition

Cold room/ cold room/ cold store/ cold store Models Used cooling chambers/cold rooms for connection to an external unit in various designs (L 220 - 625cm, W 150cm, H 200-260cm) can be sold at a reasonable price. The following versions are currently available: L 300 cm | W 150 cm | H 260 cm Cold room, used goods • External dimensions (L x W x H): approx. 300 x 150 x 260 cm • Cold room area: approx. 4.5 m² • For connection to an external refrigeration unit, not included. L 625 cm | W 150 cm | H 260 cm Cold room, used goods • External dimensions (L x W x H): approx. 625 x 150 x 260 cm • Cold room area: approx. 9.3 m² • For connection to an external refrigeration unit, not included. L 220 cm | W 150 cm | H 200 cm Cold room, used goods • External dimensions (L x W x H): approx. 220 x 150 x 200 cm • Cold room area: approx. 3.3 m² • For connectio ...

Remmert LaserFLEX | Fully automatic loading and unloading –used-: Price from location: 145.000.-€ (net) plus dismantling etc.! Manufacturer: Remmert Type: LaserFlex Year of construction: approx. 2020 Format 3015 Payload: 1,000kg 220kg/m2 Maximaile sheet metal dimensions: 3048 x 1524 mm Maximum sheet thickness: 25mm SMART Control 4.0 Can be combined with a sheet metal storage system (the sheet metal storage is not part of the sale) Former new price: 250.000.-€ (net) Manufacturer's text: Equipped with two automation units - one loading and one unloading unit - the LaserFLEX enables decoupling of the feeding of a laser cutting system. After the cutting process, a fork unit lifts the machined metal plate from the changing table. At the same time, a new sheet from the connected warehouse is transported by a vacuum unit. As soon as the plate is placed next to the l ...

Wir bieten ein gebrauchtes Kühlhaus und Gärschrank an. Abholung aus Deutschland. Price 3000 Euro aus Deutschland.

Storage paternoster, Kardex, approx. 5.96m high, 250kg / gondola – used - : Price ex location: 14.950.-€ (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Bellheimer Kardex Type: IND-250-4010.5 Device number: 116/24464 Year of manufacture: unknown, before 2000 Device height: approx. 5.96m Device width: approx. 3.01m Device depth: approx. 1.24m + 0.30m for the table shelf = total 1.54m Number of gondolas: 40 pieces Dimensions of gondolas: Width: approx. 2.48m Height: approx. 23cm Depth: approx. 41cm Max. load capacity per gondola: 250kg Total permissible payload: 10,000kg Unload: 1,000kg Dialing the gondola via the number of the gondola no longer works – the device must be controlled via the up/down button. Condition: good, Available: immediately Location: 45481 Mülheim a.d. Ruhr

Aluminium silo with hopper, used for plastic granulates, height 6000 mm, diameter 2400 mm, density 1000 kg/m3, capacity 18.5 m³, full and empty detector

3,150 LITRE STORAGE TANK https://eurolux.de/product/23-0274euba-3150-liter-storage-tank MJ UNI-PFU Total height: 4600 mm Cylinder height: 4000 mm Diameter: 1000 mm Topsoil: with bobbin bottom with threaded nozzles DN50 and DN65 with DN50 manhole in the lid Cylinder: with level indicator without scale plastic with threaded nozzle DN65 front with tasting tap with dip shank sleeve for temperature display Subsoil: with bobbin bottom with DN65 residual drain pipe pulled forward

Storage tank

Properties Volume 7300 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 3 Total height 3550 mm Height 2720 mm Diameter width 2550 mm Weight 450 kg Surface inside IIID Surface outside IIID marbled Description Topsoil: curved bottom 2 crane eyes Upwardly drawn surround with threaded nozzle DN 50 for airlock Tank cylinder: Level indicator with bar and scale with standpipe valve DN 15 Manhole 430x330 mm Sample tap DN 20 Ladder hook at the top Clear drain with inclined seat DN 50 Subsoil: curved bottom forward-drawn outlet surround Forward-drawn floor bead with disc valve DN 50 3 shell feet with calottes - height adjustable

Modula Lift ML50D Vertical Storage Lift Modula are automatic vertical carrier storage systems based on the concept of vertical storage and saving floor space. You can store any type of material safely, cleanly and efficiently, saving up to 90% of floor space. The Modula are the result of more than 30 years of experience of an Italian company with high-tech products • Minimal energy consumption • Automatic weight monitoring during beam retraction • Dynamic storage location assignment of the carriers in the device according to the heights of the stored goods • Equipment frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle timing belt • Extractor guide system with 6 HDPE rollers per side • Management of the carriers with differentiated payload The vertical storage system has been regularly serviced by the manufacturer  ...