stone mill used for sale

CNC milling machine, cover FP3A, spare parts machine, control defective / incomplete We sell parts. of this machine, SK40 milling head, with quill, tool changer, ... Control unit, table, spindles, motors, spindle nuts, ... Or total: Euro 1800,- ex works

Including attached clamping table 3000x2000x300 Auction-ID: A7-32339-8

Key data: 1600 mm, 800 mm

CNC bed milling machine with Heidenhain control 415, good condition, hydraulic tool clamping, coolant device, central lubrication, lighting,.. Travel X1600/y800/z650/ Spindle holder SK 50 Spin elder speed 60-1800rpm Working feed rate 10-3000mm/min Rapid traverse 10m/min Table clamping surface 1800x610mm Machine weight 9500kg Table load 3000kg

Key data: 1300 mm, 630 mm, 630 mm

Bed milling machine Manufacturer: Correa Type: A10 Year of Make: 1988 Control: HEIDENHAIN TNC 355 Travel X/Y/Z: 1,300 x 630 x 630 mm Clamping area: 1,700 x 630 mm Workpiece weight: 3,000 kg Hours: 25,845 Power: 19 kW Spindle Type: ISO 40 Dimensions L/W/H: 3,870 × 2,630 × 2,200 mm Machine weight: 6,800 kg

We are pleased to offer for sale a complete high-precision manufacturing cell designed for the production of long, helical and screw-profile components, including PCP and mud motor rotors, extruder and injection molding screws, compressor and pump spindles. The equipment includes: 1. 2008 LEISTRITZ PW190.8000.HP Peeling / Whirling — Fully Operational Capacity: 120 mm (4.72”) diameter × 8,000 mm (315”) length Machine weight: 92,594 lbs (42,000 kg) 2. 2011 LEISTRITZ LWN300 Milling / Hobbing — Fully Operational 3. 2009 LEISTRITZ PW300PM Milling / Hobbing — Not in Service 4. 2014 WEINGÄRTNER FINISH 450 Finishing / Polishing — Fully Operational This equipment forms a comprehensive production route covering roughing, profile machining, semi-finishing and final surface finishing of long, high-precision helical and screw-profile components. Typical applic ...

Key data: 1800 mm, 800 mm, 800 mm

Bed milling machine Manufacturer: Correa Type: A16 Year of Make: 1988 Control: HEIDENHAIN TNC415 Travel distances X/Y/Z: 1,800 x 800 x 800 mm Clamping area: 2,000 x 630 mm Workpiece weight: 3,000kg Hours: 12,103 Power: 19 kW Spindle Type: ISO 50 Dimensions L/W/H:4,886 × 2,720 × 2,500 mm Machine weight: 7,500 kg

Huvema X: 790 - Y: 420 - Z: 420 mm Max longitudinal travel X-axe: 790 mm Max cross-travel Y-axe: 420 mm Max travel Z-axe: 420 mm Max height workpiece: 440 mm Power on spindle: 3 HP Max quill travel Z´: 127 mm Admission in boring head (ISO): ISO 40 Spindlespeeds: 50 > 3750 rpm Table size: 1300 x 260 mm Digital screen: yes Weight: 1760 kg

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872

x-travel: 300 mm y-travel: 200 mm z-travel: 350 mm tool taper: SK40 spindle turning speed range: 110 - 1230 U/min table-size: 270 x 700 mm total power requirement: 3,7 kW weight of the machine ca.: 900 kg dimensions of the machine ca.: 1400 x 1400 x 1700 mm Features: - 3-axis digital display - Milling head swivels ± 45 degrees - Coolant system - User manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872

x-travel: 12000 mm y-travel: 3600 mm z-travel: 1600 mm spindle turning speed - stepless: 5000 U/min spindle motor: 34 kW table-size: 13000 x 2500 mm feeds longditudinal/cross/vertical: 15000 mm/min rapid motion -longitudinal/cross/vertical: 30 m/min no. of tools in the magazine: 100 Stück control: HEIDENHAIN TNC 640 total power requirement: 60 kW weight of the machine ca.: 88 t - CNC Control Heidenhain TNC 640 - Universal Milling Head, Automatic A/B Axis, MILLESIMAL POSITIONING - ATC for 100 tools (ISO 50) - Rotary Table 1500X1500mm, 15t - MOBILE WORKING PLATFORM - PERIMETER FENCES - STATIC RTCP OF ROTATING TABLES - STATIC RTCP IN THE SPACE - AUTOCAL - Vibration Detection Probe - Green Mode Function - Chip Conveyor - Laser Tool Setter - Coolant with Paper Band Filter (High-Pressure 40bar) - Touich Probe - Portable Handwheel Power On: 12400h, Machine ON: 6300h, Program Run: 3950h, Spindl ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsTorque (100% DC)57 NmMax. torque83 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...

2005Siemens 840D Powerline ShopMillØ630 x 500 mm200 kg115° (-5°/+110°)500 mm450 mm400 mm20-10,000 rpm9 kW13 kW82 Nm0.010 mm0.01 mm24 m/min20 m/minChain magazine with double gripper, 30 positions SK40 (DIN 69871)80-130 mm (speed dependent)290 mm6 kg80 l17 kW4,860 x 4,350 x 2,424 mm2,210 x 2,120 x 2,150 mm4.05 t35,880 h9,609 h400 V / 50 HzDirect linear encoders (X/Y/Z)Heidenhain TS641 (infrared)

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Air coolant external and internalAir coolant external and internal (through spindle centre) switchable via M-FunctionElectronic HandwheelExternal electronic Handwheel

Working width from to: 50 x 150 mm Working height from to: 20 - 50 mm 0: 1000 - 6000 mm Götzinger finger jointing machine KZA --------------------------------- For sale on behalf of a customer! The machine was used for board production. Year of manufacture: 2020 Input length: 500 – 5,000 mm Finished length: 1,000 – 6,000 mm (also longer lenghts are possible) Wood thickness: 20 – 50 mm Width: 50 x 150 mm Pressure: 50 cm² (approx. 5 tonnes) Output (cycle time): 2 – 3 joints per minute The system consists of: - Cross conveyor inlet - Finger jointing machine (2 milling motors, 4 kW each), horizontal fingers (edge fingers) - Transport roller conveyor - Glue applicator for PU glue with two application valves (needs to be overhauled) - Hydraulic finger joint press with 5 tonne pressing force - Crosscut saw with measuring wheel - Outfeed roller conveyor with pusher ------ ...

Key data: 2800 mm, 1000 mm, 1000 mm

CNC Bed Milling Machine Manufacturer: Zayer Year of manufacture 1989 Control Heidenhain TNC155 Monitor has already been replaced Table size 800 x 3000mm Travel X/Y/Z 2800/1000/1000 24 Way Tool Changer Tool holder SK50 Head swivels over program The machine is in a 100% functional condition. Machine is sold from the Saarland Illingen site. Loading can be done by us for an extra charge

Angle table of Moho 700C milling machine. very good condition Clamping surface 900 x 500mm, with T-slots Also sell other spare parts of this Maho CNC milling machine, milling head SK40 with quill and clamping, control pult, control parts, drive motor, spindles, ... please inquire Angle table from EMCO milling machine, unused; L-600mm last photo ! Euro 480,-.

SK40 milling head, with flange, with quill and tool clamping, swivelling. good condition. Is from a CNC tool milling machine MAHO 700C, Would also have a smaller one from a DECKEL FP3A. Also with quill and clamp. Also sell other spare parts of this MAHO 700C, clamping table, control parts, motor, spindles, control panel. ...

Milling cutters, end mills, drop cutters, reamers, unused Mostly Kestag, Seco, Sandvik, Walter, Böhlerit, ... different diameters, singles, sets or entire batches ! Please request a list !

Machine : Vert. Milling head Make : DECKEL, MAHO, WMW, ... Are all swivel and with quill ! A - Universal milling head, DECKEL, of FP3, SK40, with quill stroke 80mm, tool clamping with hydraulics and control panel. swivelling, price: 1200,- B - Universal milling head, MAHO, SK40, with quill and autom. Tool clamping, swivelling, L-33cm, W-30, H-60, swivel device, flange φ approx. 250mm Price : 1200,- Would also have milling spindles - SK30 - SK40

X-axis travel: 1,050 mm Y-axis travel: 550 mm Travel Z-axis: 520 mm Spindle speed (max.): 12,000 rpm Overall height: 2,778 mm Overall width: 2,977 mm Overall length: 3,635 mm Total weight: 6,700 kg Workpiece weight (max.): 800 kg - Control: SIEMENS 828 D incl. OPERATE and ShopMill - Number of magazine slots: 30 - Tool holder: BBT 40 - Internal cooling: 20 bar - Tool weight: max. 8 kg - Tool change time: 3 s - Chip-to-chip time: 5.5 s - Blum probe ZX-Speed IR - Blum 3-D touch probe TC-52 LF

5 pcs end mill MK, various, incl. SK50 mount For boring mill MK or milling machine SK50 , See also our post End mills ! Also have items with SK40 .

MAKTEK VM 400 CNC vertical machining center was built in 2015 in Poland by MAKTEK Jerzy Zalewski (currently CORMAK). The machine is suitable for both unit and series production, particularly for manufacturing components requiring high precision and repeatability. It enables precise milling, threading and drilling of workpieces using a reliable spindle. The spindle, driven by a high-power motor, reaches a maximum speed of 4000 rpm. It cooperates with an automatic, 10-position tool magazine, streamlining the subsequent machining operations. The rigid design of the MAKTEK VM 400 CNC milling machine ensures stable operation even during intensive use. The machine is equipped with a SIEMENS SINUMERIK 808D MILLING CNC controller with an intuitive interface. The VM400 CNC machining center weighs 1850 kg. Technical specifications of the MAKTEK VM 400 milling center - CNC controller: SIEMENS S ...

1 boring tool Oerlikon MK5, φ 70, 6-260 5 top-mounted milling mandrels MK5 - φ 16, 22, 27,32,40mm 2 Clarkson clamp chucks 1 MK5 boring tool, adjustable, φ 60mm 2 Shots 2 milling cutters: End mill roughing/plain φ 56x100mm, / groove milling cutter 4 milling cutters: 2 roughing/plain φ 40x12o, 2 roughing cutters 1 Reduction from MK5 to SK40 Weight: approx. 70kg kg PRICE : € 600,- ex works ! A - T-slot size: approx. 21.5mm, B-35, thread M20 16 T-slot nuts 20 pcs threaded rods M20, L-120 – 400mm 3 x 2 pcs clamping claws 4 nuts long, 6 nuts, washers 2 blocks for adjustment with adjustment screw 4 blocks 80 x 60 x40mm ( underlay )

IMPORTANT - PLEASE READ If you are interested, please contact us by phone. Location of the machine on request Sale preferably from location, buyer organizes dismantling and transport For sale is a high-precision tool milling machine from the Austrian manufacturer EMCO, model FB-5 (Emcomat). This industrial machine is appreciated in toolmaking, prototyping and training workshops for its excellent geometry and reliability. Equipped with universal table as well as horizontal & vertical spindle for maximum versatility in milling and drilling work including extensive accessory package (various cutter holders/SK40 taper; clamping devices etc.)

- Dual-stream mill for fine wood chip production with segmented internal grinding elements. - Main motor power 315 KW. - Equipped with PALLMANN CLEANOMAT system (installed according to documentation in 2009). - Stripper. - The upper feed hopper with vibratory system and the magnet are NOT included (marked with a cross in photograph no. 4). - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-49881-14

Maho MH 1000 S X: 1000 - Y: 560 - Z: 800 mm CNC Max longitudinal travel X-axe: 1000 mm Max cross-travel Y-axe: 560 mm Max travel Z-axe: 800 mm Power on spindle: 15 kW Admission in boring head (ISO): ISO 50 Spindlespeeds: 2000 rpm Table size: 1250 x 800 mm Control: Philips 432 Length: 4600 mm Depth : 2500 mm Height: 2300 mm Weight: 7,5 ton Toolholder: yes

- Centrifugal viruter mill with knife ring for the manufacture of flat chips. - Main motor power 315 KW. - Power of the hydraulic power plant 2.60 KW. - Rotor rotation speed 1107 rpm. - Rotor diameter 1393 mm. - Number of blades: 54. - Blade length 690 mm. - Maximum production up to approx. 20000 kg/h (depending on the type of wood, moisture and chip thickness). - Stripper. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-49881-9

spindle diameter: 115 mm x-travel: 2000 mm y-travel: 1200 mm control: Heidenhain TNC 355 Lotse z-travel: 1200 mm w-axis: 590 mm total power requirement: 48 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Knife ring virute mill for the manufacture of flat chips. - Percussion wheel motor power 250 KW. - Blade ring motor power 22 KW. - Percussion wheel rotation speed 850 rpm. - Cutting circle diameter 1200 mm. - Number of blades: 49. - Blade length 450 mm. - Maximum production up to approx. 10000 kg/h (depending on the type of wood, moisture and chip thickness). - Stripper. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-49881-6

bore capacity in steel (diameter): 40 mm throat: 250 mm bore stroke: 125 mm spindle taper: MK 4 spindle turning speed range: 50 - 2500 U/min : 550 mm : 230 mm table surface area: 820 x 240 mm connected load frequency: 400 V total power requirement: 0,8 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,2 x 1,0 x 1,85 m Drilling and milling machine - Digital display - Clockwise/counter-clockwise rotation - 2 electric speed ranges - Drilling spindle with automatic feed and manual feed - Includes machine stand The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Knife ring virute mill for the manufacture of flat chips. - Percussion wheel motor power 250 KW. - Blade ring motor power 25 KW. - Percussion wheel rotation speed 850 rpm. - Cutting circle diameter 1200 mm. - Number of blades: 49. - Blade length 450 mm. - Maximum production up to approx. 10000 kg/h (depending on the type of wood, moisture and chip thickness). - Stripper. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-49881-7

x-travel: 700 mm y-travel: 400 mm z-travel: 350 mm table-size: 920 x 300 mm control: konventionell tool adaptor: SK40 turning speed range: 40 - 2000 U/min quill stroke: 50 mm total power requirement: 2,4 kW weight of the machine ca.: 1,1 t dimensions: 1,4 x 1,6 x 2,1 m Equipment: - Heidenhain digital readout - Coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Brass blank, brass plate, sides milled, L-345mm, W-230, H-70mm, weight: approx. 48kg. Price: Euro 480,-, net ex works !

General SKU291Y489 MakeFryma TypeML 160 No.M10451 Year of construction1993 Mounted on framecheck Motor Motor power7.5 kiloWatt Main Features MaterialStainless steel Motor7.5 KW Inlet diameter160 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesø 200 x 50 mm With hoppercheck Inletø 160 mm Outlet155 x 85 mm Motor7,5 kW 380 V 2890 rpm Speed2890 rpm MaterialStainless steel 1.4301 (304) General LocationBarneveld Mounted on wheelscheck With switchcheck Floorspace0,80 x 0,60 m Total height2,50 m Weight250 kgColloid millsNew arrivalsFrymaMills > Colloid millsNew arrivalsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many mo ...

General SKU297Y563 MakeCondux TypeCFS 8 LocationBarneveld Main Features Motor2.2 KW Inlet diameter60 mm Specified Features - Jet Mill Rotor size85 mm Grinding room sizeø 200x350 mm Housing dimensions ø 200x350 mm InletDN60 Motor2,2 kW (220/380 V 2840 rpm) Jet Mills MaterialStainless steel 1.4571 (316Ti) General Floor space1,15x0,40 m Total height0,95 m Weight210 + 70 kg Extra SpecificationsOutput DN35,&:nbsp:with K-tron screw feeder, type K2, with digi driver, 2000 rpm, input Dia. 220 mm, with stirrer.Jet MillsNew arrivalsConduxMills > Jet MillsNew arrivalsBrand > Condux What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Deckel-Maho DMU50 X: 500 - Y: 400 - Z: 400 mm CNC Max longitudinal travel X-axe: 500 mm Max cross-travel Y-axe: 400 mm Max travel Z-axe: 400 mm Power on spindle: 13 kW Admission in boring head (ISO): BT 40 Spindlespeeds: 20 > 9000 rpm Table size: 700 x 500 mm Control: Heidenhain TNC 426 Length: 2700 mm Depth : 2700 mm Height: 2500 mm Weight: 3,5 ton Toolholder: yes Number of tools: 16 positions

Used machine DMU 40eVo linear Machine Type: CNC 5-Axis Milling Center Model: DMU 40eVo linear Manufacturer: DMGMORI Control:CELOS Siemens 840D sl Operate Year of Make: 2022 #001431 Location: Germany Technical data Travel range X-axis approx. 400 mm Y-axis approx. 400 mm Z-axis approx. 375 mm C-axis 360° B-axis -5/+110 ° Workpiece diameter approx. 450 mm Workpiece weight max. approx. 250 kg Speed max. approx. 20,000 rpm Spindle motor approx. 35/25 KW Number of tool positions approx. 120 Rapid traverse approx. 80 m/min Pick-up taper approx. HSK63 Additional axles approx. 2 4th/5th Compressed air bar,L/min approx. 5, 300 bar,L/min Power consumption approx. 32 kVA Footprint L x W x H approx. 2.05x2.85x2.53 m (without pallet pool) Machine weight approx. 7,500 kg Facilities Dynamic Package for DMU 40 eVo linear - Motor Spindle speedMASTER® HSK-A63 RPM 20-20,0 ...

Fitzpatrick DKAS012 Hammermill Stainless, Fitzmill hammer mill, 15Kw motor, hammermill 300mm x 250mm, then discharges into rotary valve, all on stainless frame 3Ph

Fitzpatrick FASO20 Hammermill Stainless, Fitzmill hammer mill, 30Kw motor, hammermill 480mm x 300mm, 48 blade assembly, all on stainless frame 3Ph

CONTROLS   CNC controls MITSUBISHI M720BM BASIC FUNCTIONS   number of spindles: 2   number of turrets: 1   live positions: yes   number of c-axes: 2 WORKING RANGE TURNING   swing diameter (max): 700 mm   turning diameter (max): 350 mm MAIN SPINDLE   spindle revolutions (max): 4000 /min   spindle bore diameter: 90 mm   c-axis: yes X/Z SLIDE   - rotation speeds (max): 6000 /min TOOL MAGAZINE   number of positions: 24 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 7500 kg ATTACHMENTS (TURNING)   chip conveyor: yes   coolant unit: yes   hydraulic system: yes   European CE standards: yes Machine in a good condition The spindle guides need to be replaced. Machine equipment (1500.- CHF (below)): - 1x double face and longitudinal turning tool holder - 3x face and longitudinal turnin ...

Year of manufacture 2010 TOP condition! Siemens Control Spindle 18000 rpm 10610 Spindle hours Tool changer for 30 tools IKZ el. Handwheel Chip conveyor

Dental colloid mill Manufacturer: Probst & Class PUC Type 10 L Power 7.5 kW RPM 2910

Used machine DMF200/8 Machine type: Universal milling center Model No.:DMF200/8 Manufacturer: DMGMORI Control: CELOS with Siemens 840D sl Operate Year of manufacture: 2023 Location:Germany Equipment: - Travelling column milling machine DMF 200/8 - NC swivel milling head (B-axis) - Motor spindle speedMASTER® - Tool holder SK40 DIN - Spindle speed 20 - 15,000 rpm 21 kW/16 kW - Chain magazine for 40 tools, - Chip conveyor (scraper belt) - Fixed table with integrated rotary table - Internal coolant supply 40 bar/600ll with paper belt filter - Oil and emulsion mist separators - Blowing air through the spindle center - Infrared probe PP60 optical - 3D quickSET - Laser tool measurement Blum LC50 Technical data Travel range X-axis approx. 2000 mm Y-axis approx. 800 mm Z-axis approx. 850 mm B-axis (head) +-120° ° Rotary table in table 800 mm Table size appro ...

Stock No.: 4041 MACHINING CENTER Manufacturer: FANUC, Type: ROBODRILL D21 Serial No.: P156YG066, Year of manufacture: 2015 Specifications: Longitudinal movement (X) 500 mm Transverse movement (Y) 500 mm Vertical movement (Z) 330 mm Spindle Taper 30 ISO Stepless spindle speeds 10000 rpm Tool Changer 21 Rapid traverse 54 Control FANUC 31i - B5 Controlled in axles 4 Operating hours spindle 12401 hours Accessories:                             Cooling by spindle                 CNC rotary table.                        Tool holders                   Tools Robot FANUC M-710 ic Dimensions: Weight: 2100 kg

Number of axes: 5, max. spindle speed: 50,000rpm, spindle taper: HSK E25, working area dimensions: 410x294x210mm, table dimensions: 450x300mm, T-slots: 12mm, spacing: 50mm, max. workpiece weight: 100kg, feed rate: 0-42,000mm/min, tool changer positions: 18 (linear), max. current consumption: 18A, connected load: 10kVA, length: 1995mm, width: 2480mm, height: 2080mm, weight: 3.2t, operating hours: 57,869h, spindle hours: 1,797h, an on-site inspection is possible.

Key data: 800 mm, 300 mm, 630 mm

Universal Milling Machine GAMBIN 11 M Travel X: 800 mm Travel Y: 300 mm Travel Z: 630 mm Cone: SA 30 Spindle speed: from 25 to 1800 RPM Table size: 1300 x 300 mm Horizontally + vertically tilting head Spindle motor: 4,8 KW Auto Feeds X - Y - Z Spindle body exit: 240 mm Lubrification Voltage: 380 V Width: 2000 mm Depth: 2100 mm Total height: 1800 mm Weight: approx 2,2 T

Key data: 1000 mm, 300 mm, 600 mm

Universal Milling Machine VERNIER type FV Travel X: 1000 mm Travel Y: 300 mm Travel Z: 600 mm Cone SA 40 Spindle speed: from 32 to 1500 RPM Table size: Length 1500 x Width 320 mm Horizontally + vertically tilting head Scale 3 axes ACURITE Feeds auto X - Y - Z Length: 2200 mm Depth: 2100 mm Total height: 1900 mm Weight: approx 2,5 T

Key data: 20000 mm, 7900 mm, 2500 mm

CNC Gantry Milling Machine Waldrich Coburg PowerTec 4500 Built in 1999 with Siemens 840C CNC control X 20,000 mm (longitudinal gantry) Y 7,900 mm (transverse travel of the milling ram) Z 2,500 mm (vertical travel of the milling ram) W 2,500 mm (transverse beam perpendicular) Distance between uprights 4,380 mm Distance from spindle to table max. 4,000 mm Spindle overhauled in 2023 Spindle motor power 105 KW Spindle speeds 2 – 2,500 rpm (2-stage gearbox) Torque S1 9,000 Nm Spindle holder ISO 60 / ISO 50 405-speed tool changer 5 milling heads Universal milling head automatic indexing 1° / 1° Offer number V(F)-7155

Spindle diameter: 110 mm Travel: X: 1985 mm Y: 1620 mm Z: 1260 mm W: 710 mm Table surface: 1400 x 1600 mm Spindle taper: ISO 50 Control system: HEIDENHAIN TNC 426 Maximum table load: 6300 kg Feed rate: 5 m/min Working feed rate: 5 to 2500 mm/min Spindle speed: 6 to 1250 rpm Motor power: 33 kW Total power: 90 kW Table rotation: 360° Weight: 25400 kg