stone cutting used for sale

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.

3000 x 1500mm / 5000w / Siemens 840 - Single Head Technology

3000 x 1500mm 3000w TruDisc Fiber

3000 x 1500mm 3000w FIBER

The SERVOCUT 602 cutting machine is designed as a wet cutting grinder for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramics or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERVOCUT cutting machines ...

The laser BYSTRONIC BYVENTION 3015 was manufactured in 2009 in Switzerland. The laser cutter is equipped with two cutting heads: 5 and 7.5 inches. Technical parameters : - laser source power: 2200 W - punching machine hours: 17487 h - 2 cutting heads: 5 and 7.5 inches - maximum size of the processed sheet: 3000 x 1500 mm - maximum cutting thickness, black steel: 8 mm - maximum cutting thickness, stainless steel: 6 mm - maximum cutting thickness, aluminum: 4 mm

Original digital program MCS 2 Central and side air tables Light guards. 2 Knives. Complete cleaned, checked and tested In full working order mechanical and electrical Available immediately.

Key data: 500 , 350 , 300

Travel X 500 / Y 350 / Z 300, Water bath machine, automatic wire threading, incl. 20 KG option incl. cooler

Spare parts for smooth cutting head board Baader 424 / 429 (Straight Cut Heading Machine Baader 424 / 429). Almost all spare parts are available in stock or at short notice.

Huller thread cutting machine vith hydraulic vice. Thread head from M3 up to M27 Machine is perfect for serial work.

Bread cutting machine Wabäma Signa Elektronik 460.10 SB Bakery -Self-service machine for Supoermarkt SB Shops -Built in 2010 -Cutting width 10mm -400 volts Rated power 750 watts -Weight 200 kg

Air table, side tables chrome-plated table Monitor Replacement knife

Stock - No. 2537 1 used,, functionally tested cutting mill/granulator Manufacturer: Alpine Hosokawa Type: RO 50 / 80 Built: 1993 Material feeding hopper: 500 x 840 mm Opening hydraulic Rotor diameter 500 mm x width 800 mm Rotor semi-open, 4 rotor V-cut - 2 Fixed blades Drive 55 kW Sieve diameter 10 mm Blower and Cyclone Throughput up to approx. 800 kg/h depending Material Machine is ready for demonstration from the Wuppertal plant, Date by appointment More granulators from stock ready to show, Ask for our current stock list or visit : plasticotrading

Automatic program Safety guard 2 x standard L knives length 320 mm 1 other tool Machine complete in working conditions, sold as is.

3000 x 1500mm 3000w

3000w IPG 3000 x 1500mm

OERLIKON / ALPHATOME II T30 HP300 PPM 400 OERLIKON - Typ: ALPHATOME II T30 HP300 PPM 400 - Baujahr: à 2013. Special features of the ALPHATOME II series / EQUIPMENT: Camera system: Moving camera on the cross-drive carriage for easy positioning and cutting monitoring by the operator from the control panel. The graphic is done by a permanently visible button on the touch screen interface. Protective devices: 7 Facilities for the protection of operating personnel. Photocells in the front and back of the bridge. Emergency stop button on all corners, as well as on the external control panel. Anti-glare-/splash protection: The anti-glare panel of the bridge is raised or lowered automatically or by pressing a button. On the sides, the panel can be opened manually for the burner and wear parts. Furthermore, the noise development is significantly reduced and resulting smoke is bet ...

Wabäma WSG CLASSIC 460/11 Bread cutting machine / Bread gate 10mm Y.O.M. 1999 Condition: Used as available Manufacturer Wabäma GmbH Model: WSG Classic 460.11 230 V / 3.4 A /0.75 kW Weight: approx. 175 kg Dimensions: approx. 62 x 68 x 128 cm Visit possible at any time on site.

New machine 24-month warranty Benefits: + TOP value for money + Horizontal cutting machine, ideal for hamburger buns / rolls & cake bottoms + also suitable for cutting /halving baguettes, flatbreads, white breads + Products are guided with conveyor belt to the cutting station + comes with 3 cutting knives, double and triple cutting possible + Adjust cutting height in 5 mm increments + Machine on a robust, mobile frame, with locking wheels + equipped with two safety protective grilles + with upper transport/feeding belt + Tape speed can be controlled by rotary knob, for optimal adjustment of cutting results + with cleaning brushes on the conveyor belt + with quick coupling for belt cleaning + with pull-out collecting plate on the output belt + fast spare parts supply within 1-2 business days Technical data: - max product height: 90 mm - Bandwidth: 405 mm - Band spe ...

Bread cutting machine Treif Pegasus 2616 -Bread cutting machine without oiling -for long loaves -complete in stainless steel -with sickle knife -Cutting width adjustable from 4 to 14mm -mobile on wheels -Year of construction 2000

cutting , trimming saw machine for solid wood MZ PROJECT LC 3000 second hand machine CE regulation: YES lengthwise cutting of solid wood planks and panels length max. of cut mm. 3000 with automatic ( NC ) pusher for cutting width mm.1500 conditions of working : Excellent main motor power Hp 15 weight kgs. 2.600 volt. 380/50

The new automatic version of the Horizon Brown 425 cutting line has been designed to reduce cutting times and facilitate the operator in machine adjustments. The machine is easily adaptable to customer requests for the wide range of accessories provided in its production. MAIN FEATURES OF THE MACHINE: - easy-to-program machines - blade diameter Ø 425 mm - maximum cutting capacity Ø 143 mm - rapid movements with brushless motors - blade rotation with controlled speed with inverter - electronic control of the cutting table rotation movement - power wagon position control with magnetic stripe - 1550 mm feed wagon stroke with the possibility of automatic repetition - CNC or IMS controlled cutting angle - hydraulic adjustment of the vertical jaw - hydraulic adjustment of the horizontal jaw - possibility of connection with PC to optimize the cycle

Cutting LEO with extended inlet belt Pretzel Rolls Baguett - Tailor Table unit made of stainless steel Knife height adjustable for average Band speed adjustable DGUV V3 tested Connection 230/240V, 50 Hz, plug-in Transmission width/height 140/ 90 mm Dimensions (WxDxH) in mm: 1700 x 440 x 470 NEW Machine With warranty Optional: - Driving table for LEO - Cut - Frach kosten

Inlet: 1200 x 950 mm Rotor width: 1200 Rotor diameter: 800 Stator knife: 4 Rotor blade: 7 x 4

Technical data: - Threaded drilling capacity up to approx. M 16 - Threaded drilling depth approx. 75 mm - Drilling feed from + Up infinitely adjustable - Extension 90 mm - Spindle speeds up to 290 rpm - Pneumatic connection with pressure reducer 6 bar - Pneumatic foot scanner - Drive 400 V / 0.75 kW - Space requirement approx. W 700 x H 2250 x D 800 mm - Weight approx. 150 kg

Code: 0003 Brand: BOTTENE Model: PUSH 100 - CE Standard Computer-operated automatic crosscutting machine with pusher for cutting of wooden boards - CE Standard The board fed in is analysed by the pusher and the data processed by the computer, which optimises the length according to different criteria chosen by the user. The boards are fed in by a pusher controlled by a brushless motor. The blade is driven by a motor and pneumatic cylinder located under the machine base. Blade diameter min/max mm 400/550 F30 Blade speed rpm 2800 Cutting capacity: with blade mm 450 mm 300 x 120 - with blade mm 550 mm 350 x 150 Blade motor Hp 5,5 Pusher stroke mm 5000 Max table load length mm 4100 Positioning speed 65 mt/min Working table height mm 915 Unloading table with side ejectors Suction inlet diameter mm 120 Overall dimensions of assembled machine: mm 9900 x 1850 x 1550 h Over ...

Unwinding, cutting, stacking and depositing on a conveyor belt consisting of: 1x u550 divertler, slicer/stack system c23s25 (middle cut-out) and 1 x conveyor belt tray 2m and an extraction system GR 140.2 x trolley for paper rolls. Specifications: Dispenser u550: Umwinder u550 Outfeedplate Airshaft 70mm/520 Lifting KIT Offline KIT 2 trolleys for the paper rolls Cutting line C23S25: Cutter c23 Middle knife Gutter cut 6mm c20/23 Extraction side trim-c23 v2 Conn.parts Gutter cut c23 v2 Stacker s25: Aassy Automatic stop plate Conveyer/conveyor belt 2000/634 v-speed Extraction system GR 140 Appointment You have the opportunity to inspect the objects before buying. Location Location: Im Schorrenfeld 8 in 76661 Philippsburg-Hüttenheim Disclaimer The sale of used items takes place as the item stands and lies, to the exclusion of any warranty for material defec ...

CUTTING GATE FOR DICER RÜHLE typ SR 1- used Cutting gate sizes to the choice /optional/ : 6 and 24 mm Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT id: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36 abc.inter-wiba.com.pl info@inter-wiba.com.pl

Cutting mills Drive with 4 New Knives Drive General Overhauled as a replacement for Getecha cutting mills . Pradler Machines Service Service for temperature control / cutting mills / drying

Cutting mill Manufacturer: NEUE HERBOLD Built: 2001 Drive: 7.5 kW for the grinding of foils: optional with roller feeder type EB 290 (drive 0.75 kW)

Wire EDM machine SODICK A 600 manufactured in 1997. Technical parameters of the SODICK A 600 EDM machine: - table travel (X axis): 600 mm - table travel (Y axis): 400 mm - Z axis travel: 270 mm - maximum dimensions of the processed part (width x depth x height): 800 x 550 x 260 mm - maximum weight of the workpiece: 900 - auxiliary table travel (U axis x V axis): 70 x 70 mm - wire diameter: 0.1 ~ 0.3 mm - maximum wire speed: 250 mm / sec. - wire tension: 0.2 ~ 2.8 kgf - cutting inclination at an angle: + -15 degrees per 100 mm of thickness - height from the floor to the surface of the working table: 1000 mm - machine tool dimensions (width x depth x height): 2188 x 2645 x 2100 mm - machine tool weight: 3700 kg

TECHNICAL DATA: Working area 3,000 x 1,500 x 115 mm Control Siemens Sinumerik 840 D Laser power 5,000 watts Max. sheet thickness structural steel 25 mm Max sheet thickness stainless steel 20 mm Max sheet thickness aluminium 12 mm Machine regularly serviced by TRUMPF! Standard: - Closed machine frame with integrated laser unit - TRUMPF laser TLF 5000 - Laser unit: CO2 laser, high-frequency excited, maintenance-free turboradial blower, cooling unit, logbook function - Automatic pallet changer and longitudinal conveyor belt - Drives: Gantry drive in combination with linear direct drives - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Plasma sensor inges, PMS - Automatic sheet metal edge detection - Programmable performance cycles - Microweld - Automatic nozzle cleaning - Fast editing with SprintLas - ContourLas for making small ho ...

Used only for experiments.

No. 4620: 1 gebr. Guide and pull spindle lathe Fabr. BOLEY, Type 5 LZ, Arb.-Ber.: SpH 130 x 500 mm, Other: Spindle speeds: in 22 stages 28 - 2550 min-1 Space requirement: 1.5 x 0.9 x 1.25 m Weight ca 800 kg

Slicer WABÄMA: knives thickness 9 mm, new knives; power 0.5 kW/380V semi-automatic lubrication; automatic adjustment of the height at the upper plate of bread;

Bread cutting machine Jac BEM 450/10 -Bread cutting gates -10mm cutting width -semi-automatic -400 Volt 50Hz -Weight 164kg Function checked Shipping by forwarding company possible, costs depending on the postcode.

TECHNICAL DATA: Max oscillation length mm: 100 Max depth of slots mm: 80 Spindle center distance min mm: 84 / max 1170 Spindle rotation rpm: 6.000 / 12.000 Processing: double sided Weight Kg: 2250

Cutting Machine Fruit & Vegetable Shredder Herb cutter herb cutting machine for e.B. red cabbage, white cabbage, blue cabbage, Used Manufacturer: Gevaar Cutting chamber approx.: 800 mm Rotor/cutting disc approx.: 700 mm Filling flap approx.: 900 x 800 H 300 mm Filling flap adjustable via Pfaff winch Outlet approx.: 800 mm Vector RF60-DV112M-4 Drive Motor 220/380 v, 15.2/8.7 A, 50 Hz Power 4 kW, 275 r/min Total approx.: 2000 x 1200 H 2300 mm Weight: 421 kg Changes and errors in the technical data, Information and prices as well as intermediate sale reserved.

3000 x 1500mm 4000w With Bytrans Extended loading/Unloading

TECHNICAL DATA: Clamping height max mm: 1040 Tenoning depth max mm: 150 Slot length max mm: 340 Main motor power HP: 3 Weight Kg: 340

Qty. 1 Second-hand cut-to-length line Mfc.: Ungerer Built: 1966 Material: Stainless steel Strip Width: 300 mm- 1500 mm Thickness: 1.5 mm (stainless steel) Cut length: 750 mm- 6000 mm Length adjustment: mechanical Coil weight: 9.000 kg Coil min/max inner Ø: 500 & 600 mm Shear Type: Rotary Hydraulic system Stacker capacity: 2000 ton PLC: Allen Bradley Scope of supply: Decoiler Crop shear Edge trimmer Leveller PVC film applicator Stacker Camera system

3000 x 1500mm 4000w Bytrans Extended

Product number: 1940P Type: AGOL-850 Order number: ON17163 Year of construction: 2015 Capacity: max 800 pigs/hr. Products: pork carcasses, left & right Slaughtered weight: 70 - 120 kg Air pressure: 6 - 8 Bar, 285 Nl/min. Power: 3 x 400V, 50Hz, 45kW Dimensions: 10000 x 5150 x 2300 mm NEW in box, never used

Automatic program Safety guard 1 standard L knife length 320 mm Finger cut equipment :3 tools diam. 18, 20, 24 mm Machine checked and cleaned.

Inlet opening: approx. 100 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: 350 mm Stator knife: 2 Rotor blade: 3 Drive: 30 kW Feed opening: approx. 100 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: 350 mm Stator knives: 2 Rotor knives: 3 Drive: 30 kW

Inlet opening: approx. 100 x 1000 mmm Rotor width: approx. 1000 mm Rotor diameter: 350 mm Stator knife: 2 Rotor blade: 3 Drive: 30 kW Feed opening: approx. 100 x 1000 mm Rotor width: 1000 mm Rotor diameter: 350 mm Stator knives: 2 Rotor knives: 3 Drive: 30 kW

3000 x 1500mm Sheet 6500mm Tube length 3000w IPG FIBER

Inlet opening: approx. 300 x 600 mm Rotor width: approx. 600 mm Rotor diameter: approx. 300 mm Stator knife: 2 Rotor blade: 4 x 2 Drive: 30 kW Feed opening: approx. 300 x 600 mm Rotor width: approx. 600 mm Rotor diameter: approx. 300 mm Stator knives: 2 Rotor knives: 4 x 2 Drive: 30 kW

Make: TRUMPF Type: TRUMATIC L 3030 RotoLas Built: 2002 Working range: 3000 x 1500 mm Laser power: 2000 watts Engine hours: 54,000 Control: Siemens Sinumerik 840D Standard: Closed machine frame with integrated laser unit Laser unit: CO2 laser TLF 2000 high frequency excited, mirror telescope, cooling unit, logbook function Automatic pallet changer and longitudinal conveyor belt Drives: Maintenance-free three-phase servomotors HI-LAS High-pressure cutting Plasma Sensors (PMS) Fast editing with SprintLas ContourLas for making small holes Cutting gas pressure setting programmable Laser cutting head with 5" lens and laser cutting head with 7.5" lens, DIAS III Cutting head quick-change device Position laser diode Automatic focus position setting AutoLas Plus Logbook function Laser Oil spraying device for safe thick sheet processing Auto shut-off Workspace lighting  ...

CNC Portal Cutting Machine Manufacturer: ESAB Type: Suprarex SXE-P1 4000 Built: 2009 CNC Control: Vision55 2 autogenous burners 1 plasma burner with power source Kjellberg HiFocus 160i Track width: 4,000 mm Working width: 2,500 mm Track length 18 m (shortenable) without table without filter