stil used for sale

Chassis, electric motor, DC motor, traction motor, drive motor -Chassis for: pedestrian stacker make Still type EGU2000 -with: slewing ring and drive (steering) -Wheel: 240 x 80 mm -Dimensions: 290/290/H620 mm -Weight: 64 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Single-acting: cylinder -Piston diameter: approx. 60 mm -Piston rod: Ø 45 mm -Stroke: 1530 mm -Cylinder comes from a Still forklift mast -universally applicable: -Number: 1x cylinder available -Price: per piece -Dimensions: 80/80/H1800 mm -Weight: 36 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -single acting cylinder -Piston diameter: approx. 110 mm -Piston rod: Ø 85 mm -Stroke: 1970 mm -Cylinder comes from a Still forklift mast -universal: applicable -Number: 1x cylinder available -Price: per piece -Dimensions: 140/140/H2195 mm -Weight: 121 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -single acting cylinder -Piston diameter: approx. 40 mm -Piston rod: Ø 35 mm -Stroke: 980 mm -Cylinder comes from a Still forklift mast -universal: applicable -Number: 2x cylinders available -Price: per piece -Dimensions: 1140/85/H60 mm -Weight: 14 kg/piece

Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -comes from a Still forklift -Drive: 40 V 2.5 kW -Dimensions: 340/225/H300 mm -Weight: 32 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -single acting cylinder -Piston diameter: approx. 80 mm -Piston rod: Ø 80 mm -Stroke: 1120 mm -Cylinder comes from a Still forklift mast -universal: applicable -Number: 1x cylinder available -Price: per piece -Dimensions: 1470/450/H125 mm -Weight: 104 kg/piece

Gearbox, planetary gearbox for hydraulic motor, hydraulic motor, oil motor, hydraulic pump -Gearbox: is unused -Gearbox: for driving STILL type 60-45 forklifts -Lamella spring pressure brake -Drive shaft: mm -Translation: 1: 1 -universal: applicable -Number: 1x available -Price: per piece -Dimensions: 280/430/H370 mm -Weight: 47 kg/piece

Machine from 2003, in perfect condition, completely revised, new gaskets AND PAINTED. Maximum cutting thickness (450 N/mm2) mm 4 Cutting length mm 2050 Cutting angle < 2º Engine power Kw 4 Blows per minute 1/min 25 Rear stop motor power Kw 0.55 Working height (F) mm 890 Table width mm 400 Rear stop travel mm 750 Length (U) mm 2800 Width (G) mm 1460 Height (Y) mm 1450 Approximate weight Kg 2100 STANDARD EQUIPMENT: Manual backstop Millimeter square console CE standards

Used can seaming machine STILLER, type: STA 1200 D -as good as new- - Lid magazine - Automatic lid feeding - Locking lever with 2 locking rollers - Incl. sealing tool for 99 mm and 73 mm cans - Suitable for wet and dry operation - Condition: Very good, ready for immediate use - 27,911 cans sealed - Capacity: max. 1,000 cans / h - Can height: 30 - 300 mm - Can diameter: 52 - 99 mm The machine is in mint condition and is ready for immediate use. Viewing and test run are possible by arrangement.

Electric pallet stacker STILL EGV 14, Load capacity 1,400 kg 229 abl. B/h YOC 2008, Curb weight 1200kg S/N 710248000166 Duplex mast height 257 cm permissible total weight 2600kg

Elektrostapler - electric Forklift STILL R20-18I Serial-No. R20-18I - Year 2005 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

General SKU201K009 LocationBarneveld MakeStiletto Triltechniek Amsterdam TypeVR90-50 No.0970-2 Year of construction2007 Main Features MaterialStainless steel Length1750 mm Width400 mm Specified Features - Vibro feeder MaterialStainless steel Vibro feeder(1x) Feeder width400mm Feeder length1750mm Feeder height140mm With vibro motorcheck400Volt, 3000rpm Information Mounted on framecheck CEcheck Floorspace2,2x0,7m Total height0,9mVibro feedersStiletto AmsterConveying systems > Vibro feedersBrand > Stiletto Amster What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU042Y538 LocationBarneveld MakeStilmas TypePSG-500 DTS No.3797/86 Year of construction1986 Pressure Working pressure10 Bar Working pressure jacket10 Bar Working pressure tubes6 Bar Specified Features - Distillation Distillation installationPure Steam Generator (1x) MaterialStainless steel 1.4401 (316) Information Mounted on framecheck With switchgearcheck Floorspace1,5x0,7 M Total height2,7 M Weight600 KG Extra Specifications- Stilmas Pure Steam Generator type PSG-500 DTS produces saturated, dry, pyrogen-free pure steam, used as heating fluid for industrial systems DistillationStilmasColumns > DistillationBrand > Stilmas What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visi ...

Год выпуска 2002г. Управление Siemens S7-300. Управление через монитор Touch Screen, русифицировано. Документация в наличии. Розлив в ПЭТ бутылку негазированных жидкостей объемом 0,5л – 2,0л, горло 38мм. В наличии гарнитуры на 0,5л, на 1,0л и на 2,0л. Характеристика продукта - пастеризованные соки, холодные чаи. Мах производительность 6000 л\ч. Три типа скорости: 1. В производственном режиме от 3000б\ч до макс б\ч (в зависимости от объема бутылки, ограничение 6000л\ч) 2. В импульсном режиме от 3000 до 5000 б\ч 3. Режим сан ...

Powerful rough terrain forklift from Esslingen (today Still) Has been restored before. Good condition. At call. Robust engine from Mercedes-Benz (OM314 3.8l diesel) known from the Unimog or LP808 Battery a bit weak at the moment, Engine + Hydrostat Top! Fork length 130cm Lifting height 3.3m Lifting capacity 3t Curb weight approx. 4.5t The truck can be viewed at any time. Several available. Take a look at our other listings. Transport possible throughout Europe If you have any questions, just write or call Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Tel. 016096679844

Tugger train tractor STILL electric tractor STILL type CX T Towing capacity: max. 4000 kg Nominal drive power: 3 kW Battery voltage: 24 volts - Hydraulic quick coupling (single-circuit hydraulic system, was used for lifting trailers) - Trailer hitch - plus an automatic battery charger - Battery in poor condition Empty weight: 740 kg Battery weight: 382 kg Total weight: 1120 kg 3 pieces available: Tractor 1 = year of construction 2011 Tractor 2 = year of construction 2010 Tractor 3 = year of construction 2008 Only the tractors are offered, trailers are not for sale.; used

Description: Mast type: triplex Height: approx. 4200 mm Load capacity: 3000 kg Type of drive: Diesel Operating hours: 10500 Free lift: yes Fork positioner: yes Side shift: yes Full cab: yes Rear tires: new Front: approx. 80% Technically known defects: lighting, air conditioning not working, engine oil loss (oil pan or oil seal), side window must be replaced Approx. Onsite Dimension. (l x w x h): 4,500 x 2,000 x 3,000 mm, weight approx.: 5,000 kg

Description: for forklifts 80 V Untested / defects cannot be excluded Approx. Onsite Dimension. (l x w x h): 800 x 800 x 800 mm, weight approx.: 80 kg

Article number: 27-01-172 Manufacturer: Still Very good general condition Installation of a new battery took place in 01/2022 Shipping time: All rights reserved. Year of construction: ca.1968 L x W x H: approx. 2400x1200x1800mm Weight: approx. 2200kg Load capacity: 1000kg Propulsion: Battery Accessories  Charger  Documentation  Spare key Other accessories on request Price and other technical data on request

Description: Operating hours: 18178h Load capacity: 6000kg Front / rear tires type: Continental CSE-ROBUST SC 15 / size: 4.00-8 Approx. Onsite Dimension. (l x w x h): 1,195 x 1,200 x 1,400 mm, weight approx.: 972 kg

Description: Load capacity: 1300kg Approx. Onsite Dimension. (l x w x h): 700 x 1,100 x 300 mm, weight approx.: 50 kg

Output: 43200 // Bottle Size: 300-700ml

Meat processing equipment from a modern German butcher's shop for sale. The equipment consists of: • Seydelmann AD 114 automatic grinder • Kilia Meister Plus 50, 50 liters bowl cutter with variable knife speed • Vemag Robby Typ 136 vacuum filling machine with casing holding device • Poly Clip SCD 7095 clipping machine • Stiller can seaming machine DV 10 PS • Maja SA 85 S ice generator • Vakona ESK 125 Tumbler • Stein smoke house • scales, slicers, moulds, stainless steel tables If desired we can arrange worldwide delivery and send our German master butcher to instruct your staff on-site.

Magister ES100 ES100/2 Stilo L espresso machine Automatic electronic espresso coffee machine with programmable dosage. Cladding made of or mirror-like stainless steel Built-in volumetric pump with balanced by-pass Electronic monitoring of boiler level Coffee dispensing is done by switch with volumetric dosing (0-3000cc) with 4 cans per group and knob for continuous dispensing A hot water sprayer with automatic programmable dosing as standard Electric heating with safety thermostat Dimensions approx: 795x535x500h Boiler 11 liters Steam taps: 2 Power 4500 Watt Voltage 220/240V Single phase More items - new and used - can be found in our shop! International shipping costs on request!

• Microfiltration wine Tangenziale SIFA for sparkling wine and still wine – 2005: • Year: 2005 • Producer: SIFA • Stainless steel frame. • Suitable for still and sparkling wine. • Code P 7

Depalletizer APE mod. DEPAL 2000 - year 2003 Monoblock BERTOLASO 32.32.6.4 with pre-evacuation, composed of: SBR rinser 32 clamps double treatment and mobile nozzles - year 2002 BERTOLASO gravity filler 32 valves with corker 6 heads natural straight corks - year 2002 BERTOLASO Screw capper 4 heads stelvin - year 2006 Capsuling machine NORTAN mod. PRISMA 8+8 - year 2002 Labeller KOSME mixed glue adhesive mod. ETRA FIX 1280 15T.S2.E3 + S3.E3 electronic cam - year 2002 case erectors APE mod. FORM 200 HMA - year 2003 Case packer machines APE mod. INCA 2001 - year 2003 Carton closer APE mod. CH 200HM - year 2003 Palletizer APE mod. PAL 2000 - year 2003 Wrapping pallet TOSA mod. 095 - year 2002 BERTOLASO Caps elevator for natural straight corks mod. ALX1 - year 2002 BERTOLASO Caps Elevator for screw stelvin caps mod. A500 - year 2006 Printer for cartoon print and apply adhesive  ...

bottling line for still wine Speed: 6.000 bph Depalletizer layers SCHABERGER – 1985 Washer-dryer SICK - 1988 Rinser PERRIER – 1975: 25 clamps Single treatment Fixed nozzle. Filler IRUNDIN – 2003: 40 valves Corker BERTOLASO – 1992: 6 heads – natural straight cork. Capsuling machine C.F. – 1992: Plateau capsules distribution. 10 snare heads. Labeller KOSME – 2008 12 heads. Motorized plates. 2 adhesive stations. Predisposition for third adhesive station. Box closing machine SAVOYE – 1980 Handler TWIN-PACK – 2000 Bottle conveyors DIVERS – 1992 Microfiltration filter SARTORIUS – 1994 Batch on bottle printer IMAJE – 2014 Box labeller AVERY – 2014

Manufacturer: Handgabelhubwagen, Type: Still, Lift mast type: Hydraulisch, Total hight mm: ca.80, Fork length in mm: 1150, Lifting power kg: 2000,

Copper Pot Still Adrian Edelbrande 1400 liters for Whiskey and Brandy This Adrian Pot Still is made of special high-quality copper which is highly polished. The helmet of pot is pear shaped and steam heated heating coil is inside of the pot. A pot still is used to distil flavoured liquors such as whisky or cognac, but not rectified spirit because they are bad at separating congeners. This pot still has internal seam coil heater and therefore is can be used only for distillation of mash without fruits and botanicals. Spirits distilled in pots top out between 60 and 80 percent alcohol by volume after multiple distillations. Condensing is made in in vertical tubular heat exchanger with operation is autonomically controlled with a thermostatic valve. Technical characteristics Made by Adrian Edelbrande Condition Totally refurbished in 2020 Fill capa ...

1 of used glass bottling line for still and carbonated water Used for glass bottles 330 ml (D 61,3 x H 207,9 mm), 750 ml (D 78,0 x H 294,9 mm) and 1.000 ml (D 88,3 x H 318,7 mm) at speeds (limited by filler capacity) between 6.000 (1.000 ml) and 10.000 (330 ml) bph., mostly new 2000, plcs: Modicon, consisting of Ave Alta Meccaniche DBR50 bulk-bottle depalletizer, AVE 5.000 lph carbonator, AVE 24/24/6 rinser/filler/capper (28 mm ROPP), Kosme Unicol 720-9-2 dual-aggregate wet-glue labeler (new 2013!), Domino laser coder, Freemantle tray erector, Ave Alta Meccaniche type Inca 1T pick&place tray loader, (single-head machine, with heads for 12x 1000 ml, 12x 750 ml and 24x 330 ml), Dimac Starfilm LS film-only shrinkwrapper (overwrapping of trays), Ave Alta Meccaniche PABR 50/1 Palletizer. Some interconnecting conveyors.

Complete Boilerhouse with 18 bar FR+K, Bay boiler with a steamproduction of 2500kg/h. The burner is a Weishaupt with a capacity from 1845KW The boilerhouse is complete with stack, feedwater tank, water softener and reversed osmose installation. year of manufacturing 1996. The installation is stil in full operating modus in Germany.

The SIP 150-6 screw impeller pump is designed and built to meet the needs and demands of much of the world without the need for advanced technologies. This mobile pump unit is the simplest and most basic version in our range of 6″ screw impeller pumps., The Budget configuration is a typical old-fashioned mechanical configuration, has a direct-drive vacuum pump with V-belt without electromagnetic clutch, so the vacuum pump always works even if the screw pump has water., This configuration has no level control, and the speed must be adjusted manually via the throttle lever on the engine., This pump is as basic as you could want... Start/Stop with a switch and the RPM has to be adjusted manually. Equipped with float switching though !, However, the pump unit is completely autonomous and equipped with all the elements that Impulse always offers., It is equipped with its own fuel tank and o ...

6-colour format: 720 mm<br>TYP: 500, 6 INTAGLIO + 1 FLEXO, PAPIER & FOLIEN 50-150 GSM, ROLLS of 800 MM WIDTH: 750 MM;<br><br>Still in operation: Yes<br>Verf Gbar: immediately

Producer : Windmöller & Hölscher ( in production in Norway ) Windmöller & Hölscher flat- and satchel paper bag machine Type : Matador 31 Bag width : 50 - 310 mm. Cutting length : 120 - 650 mm. With : 4 colour flexo printing ( W&H QMS 945 - print width 800 mm.) Year : approx. 1968 Still in operation: Yes Available: now

We have tons of processing equipment for sale, half of it has never been used. Products from suppliers like: Alfa Laval - Heat exchangers, pumps, valves etc, large stock. Tuchenhagen - Valves and pumps APV - Valves and pumps Samson - Steam valves (more than 20, never used) Spirax sarco - Steam traps, steam separators, never used Siemens (Danfoss) - Flow meters MAG5000 and MAG6000, mass flow meters MASS 3100, unsed and unused Danfoss - Frequency converters, VLT5000 and VLT6000 series, still in boxes, only a few left Mobrey, Emerson Process - Level sensors, SK267 flanges 50 pieces, density meters unused Fisher rosemont - Mass flow meters DN50, 3 pieces, unused Procesdata - PD340 flow meters, more than 30 pieces, also mod. C, extended version (DN25-DN80) Not on the list? We probably have it, why not try us? Best regards, Editec AB

1 x W&H Matador S1A perforating machine for flat- and satchel bags, Bag width : 70 - 380 mm Bag length : 220 - 600 mm Satchel : max. 70 mm Paper roll width: max. 1060 mm Roll diameter : 1000 mm Year : 1970 - with : 4 colour W&H QMS flexo printing unit Speed: max. . 800 Bags/min With : Photocell for pree-printed rolls. With - Bag width - flat. 132mm, 158mm, 189mm, 238mm, 265mm. With - Bag width satchel. 122mm, 151mm, 180mm. Gearwheels . 470mm, 520mm, 540mm, 640mm, 760mm, 860mm. Still in operation: Yes Available: October - 08

Offer shelf storage: 500 plots Storage weight up to about 1 ton per pallet. The pictures are vopn of a similar plant. Very good condition can still be visited. We will be happy to send you further information, pictures and similar products. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded.  ...

Cat. No. 11-2515 in very good condition! Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Topsoil: with 1 x welded nozzle centrally in the upper floor through: 50 mm with filling nozzle at the top: 90 mm still facing the front with 2 x transport eyelets with 1 x ladder hook with 1 x holder grif with lace bottom on top Body: with manhole 420 x 320 mm with clear drain DN 50 with tasting valve connection Underbody: with forward pulled outlet pipe DN 50 with lace bottom at the bottom adjustable with 4 calotte feet with base plate Dimensions and weight: Total height: 4500 mm Diameter: 2800 mm Weight: 1500 kg The price is for a tank. For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law ...

Holweg RS 21 flat- and satchel bag machine: Year : 1974 Bag width : 70 - 380 mm Tube length : 145 - 660 mm Reel width : 150 - 900 mm Paper : 30 - 125 g/m2 Speed : 700 bags/min With : Photocell for pre-printed rolls. Still in operation: Yes Available: now

Complete system installed in 1997 - still in production - Avantra 44S with 3600 dpi - Online Rapiline for Avantra44 - Collecting basket, cable, everything with The whole system was under maintenance contract, is complete tested and cleaned Available: in production

1 x Farrel model F270 Banbury internal mixer, Machine number: 98M5023, Year 1999, 270 litre capacity, 2 wing rotor design, FYH type dust seals, Hydraulic drop door with linear actuator, Process oil system, Pneumatic hopper. with semi unidrive gearbox, AC variable speed motor, 550V (includes 11kv > 550v transformer). Alstom \Syncdrive\ AC variable speed drive controller, 1265 KVA, 550V, digital drive new in 2001. With Promtec Control system (complete but PLC missing). In feed conveyor and dust extraction system also available if required (at additional cost). Spare motor also available. Complete and in good condition (still installed at a factory in UK).

Producer : Windmöller & Hölscher Type : Matador 31 Bag width : 50 - 310 mm. Cutting length : 120 - 650 mm. With : 3 colour flexo printing Year : approx. 1967 - with: noise protection shield - wit : 2 unwind Still in operation: Yes Available: now

<br>Complete system - still in production -Avantra 44 with 3600 dpi -AgfaLine 44 - short online processor -Agfa PDF-Rip -Agfa PrintDrive Series 3<br><br><br>Verf Gbar: after 10.07.2011

1 x Farrel model F270 Banbury internal mixer, Machine number: 98M5007, Year July 1998, 270 litre capacity, 2 wing rotor design, FYH type dust seals, Hydraulic drop door with linear actuator, Process oil system, Pneumatic hopper. with David Brown unidrive gearbox, serial no GS50277, Leroy Somer Type LSM54 L76P 1492kW AC motor, Dec 2001, RPM 1000/1200, 750V (includes 11kv > 750v transformer). Output rpm 49.8/43. Alstom \Syncdrive\ AC variable speed drive controller, 1940 KVA, 750V, digital drive new in 2001. With Siemens S5 Control system. In feed conveyor and dust extraction system also for sale if required. Spare refurbished Leroy Somer motor also available. Complete and in good condition (still installed at a factory in UK).

<br>UP: 35-250 GSM, WIDTH. 1300 MM, SPEED: 250 MM, ALU-FOLIE: 30-100 MIKRON<br><br>Still in operation: No<br>Verf Gbar: immediately

<br>NEW PIV GEAR IN YEAR 2006 6 HASPELN, MAX. L"NGE: 1400 MM, 70-800 GSM<br><br>Still in operation: No<br>Verf Gbar: immediately

4-color format: Max. 1000 x 2400 mm.<br>KICKER-FEEDER, DOUBLE STANZE, SLOTTER, STAPLER ETC.. <br><br>Still in operation: No<br>Verf Gbar: immediately

C-Module AUSTRIA ERICH PETER MASCHINEN-PLANTS GMBH A - 7083 Purbach - Austria office@machines-plants.at www.machines-plants.at Affordable housing, affordable houses, Hotels - Residential complexes - Residential complexes - Detached houses - cheap houses we have sold our used ones, we also offer NEW C-Module 3000 mm x 6000 mm NEW FORMEN Cheap houses - cheap apartments I am proud to introduce you to our improved system for building affordable homes. Especially for villages and small towns. But hotels have already been built in this way - we can do all the planning for them. A useful system also for stairwells, corridors and elevator shafts - easy to manufacture. It is a modular system, but still flexible in the size of the room and in the positioning of the windows and doors. Connecting to other materials such as wood, glass and concrete slab is easy. Th ...

6-Colors R25476/17 ALLIED GEAR Labels Flexographic Printing Machine Model: Flexomaster Built: 1995 Availability: instantly 6 colors 6 Anilox rollers Paper cutters Lamination Transporter Power unit UV dryer Video body plate (JM Heaford) Still in operation: Yes Available: by arrangement