stil used for sale

Stephan UM44-S Universal Machine two speeds 1410/2820rpm Impulse switch with knife insert UM44-S was made UM44 by removing the lateral drive from the previous owner, the openings were closed with stainless steel sheets -tiltable for removal of the processed medium -neat condition, should still be thoroughly cleaned before use Video about test run and further pictures available

Old Soviet lathe. Turning speed: 56/2800. Still in working order, but nothing has been produced with it for a long time.

It is still functional, but nothing has been produced with it for a long time. Inner radii and outer radii from 6 to 289 mm. Production examples in the pictures.

It is still in working order, but nothing has been produced with it for a long time. On-site inspection is possible.

Working height: 900mm, rotational speed: 1475/min, including documentation, machine was not used and is still in the original packaging.

Max. product height: 230mm, length: 8500mm, width: 2400mm, height: 3800mm, weight: 6.5t, with documentation, the machine is still in its original packaging.

Weight: 1.12t, operational hours counter: 15,840h, with controls, the robot ran in two-shift operation, a second control system in mint condition is still available.

There are 12 identical Rittal control cabinets available, the control cabinets are still in their original packaging.

The robot is unused and still in its original packaging.

Load capacity: 2500kg, unladen weight: 4115kg. The forklift is still in use and in perfect condition.

The hydraulic brake with the valves have been renewed, the control unit of the lifting mast, control lever for lifting, lighting system repaired, the drive battery 80 V is no longer new but can still be used for normal use, the attachment including fork positioner has signs of wear, the current failure of the attachment has to do with a cable break in the rear control area, with cab and charger, UVV and maintenance up to date.

For sale: San Rocco CNC boring mill type MEC 100 with Siemens 810 control. Longitudinal and transverse movement is 1,200 x 2,000 mm, table size is 1,100 x 1,300 mm and is equipped with a full-fledged C-axis / spindle diameter is 100 mm with ISO-50 holder. The drilling spindle movement is 700 mm, the maximum spindle speed is from 2 to 1,000 rpm in 4 stages. The machine is in good condition and has an X, Y and Z axis and a full-fledged C axis and a W axis (drilling spindle 700 mm) You can move 2 axes simultaneously. You can mill around on the machine. Can still be visited under electricity, subject to prior sale.

Description: Very well preserved FRIGGI band saw without roller table. Currently, this machine is still in use and ready for demonstration. In total we currently have 4 large saws make FRIGGI in stock, one of them with roller table. We would be happy to make you a complete offer. Details Type ONL 800x850 ACN Serial number 3445 Year of construction 2007 electrical data 30 kW / 55 A Phases 3 x 400 V / 50 Hz Flywheels Ø 1,000 mm Rectangular cutting capacity 800 x 850 mm Cutting capacity Ø 800 mm Strip dimension 54 x 1.6 mm belt length 9,470 mm Trolley stroke 500 mm incl. documentation

clamping force: 800 kN injection volume: 177 cm³ screw diameter: 35 mm platen size: 580 x 580 mm Condition: used, Specification: Horizontal injection moulding machine, type: Ergotech viva 80-400 - Internat. Size specification: 800 - 400 injection unit: - Screw diameter: 35 mm - L/D - ratio: 20D - Injection volume: 177 cm³ - Injection pressure: 2387 bar - Cylinder heating: 8,8 kW clamping unit: - Clamping force: 800 kN - Max. opening stroke: 450 mm - Mould installation height: min. 250 mm - Max. platen distance: 700 mm - Mould clamping platens: 580 x 580 mm - Clear column distance: 400 x 400 mm Total machine: - Oil tank filling: 220 ltr. - Pump capacity: 15 kW - Voltage: 3x 400V, 50 Hz, N, PE - total power: 23,8 kW - Dimensions L/W/H: approx. 4250 x 1270 x 1795 mm - Weight without oil approx.: 3,600 kg - 1x core pull Plant i ...

clamping force: 600 kN injection volume: 106 cm³ screw diameter: 30 mm platen size: 590 x 600 mm Condition: used, Specification: Horizontal injection moulding machine, type: System 60/420-200 - Internat. Size specification: 600 - 200 injection unit: - Screw diameter: 30 mm - L/D - ratio: 20D - Injection volume: 106 cm³ - Injection pressure: 1995 bar - Cylinder heating: 8,3 kW clamping unit: - Clamping force: 600 kN - Max. opening stroke: 450 mm - Mould installation height: min. 250 mm - Max. platen distance: 700 mm - Mould clamping platens: 590 x 600 mm - Clear column distance: 420 x 420 mm Total machine: - Oil tank filling: 180 ltr. - Pump capacity: 22 kW - Voltage: 3x 400V, 50 Hz - total power: 30,3 kW - Dimensions L/W/H: approx. 4200 x 1400 x 2000 mm - Weight without oil approx.: 3,950 kg - 2x core pull Plant is still in ...

Tapping machine Hagen & Göbel HG 16 C 12/16 1.950 € VB Pick-up only 39114 Saxony-Anhalt - Magdeburg 01.03.2023 3 Description Offer Tapping machine Hagen & Göbel HG 16 C 12/16 with coolant tank/pump without quill guide spindles and the tool holders (Fig. 1-6) The machine is sold to our customer due to a business change. It is operational and functional as far as it works. Manufacturer: Hagen & Goebel Soest Type: verm TB C 12/16 Ref. 2226 Year built:1993 Cutting capacity: depending on the material 4-56 mm at 14-28 m/min see performance plate Drive power: 3AC 380 V, 41.1/7.1 A 1.2 kWQ Engine: KBA 100 A 6 Coolant tank: approx. 25 l gesch. Cooling center pump: TB40/220-x 380V, 0.25 A, 12 kW, 2700 1/min, 50 l/min Accessories: no Dimensions: approx. HxWxD 1500 x 990 x 1400 mm Weight: approx. 750 kg estimated Condition: used see photos The machine is stil ...

Qty. 1 Second-hand cut-to-length line – in production Mfc.: Vigano (Italy), PLC: Siemens Built: 2000 available in 9 - 2023 Status: Still in production Strip width: 580 - 2000 mm Thickness: 1.5 – 6.0 mm Max coil weight: 30 tons Max width 1250 mm up to S420MC (max thickness 5 mm) Length of sheet: 580 - 6000 mm Tolerance: +/- 1 Daily production: 80 tons

CNC-controlled drilling, gluing and duebel insertion machine Also suitable for drilling furniture connectors due to 3 controlled axes A video of the running machine can be sent on request. Working width max. 1250mm, for double occupancy 600mm with pneumatic center stop 4 pneumatic workpiece clamps Horizontal drilling unit with 3 individually retrievable drills, motor power 1.5kW Vertical drilling unit with 3 individually retrievable drills, motor power 1.5kW X-axis, Y-axis, Z-axis cnc-controlled As a result, quick changes between different material thicknesses are possible. Dowel length 30 and 35mm, currently set to 8x30mm Vibrating conveyor for wooden dowels Glue monitoring Glue quantity electronically adjustable Glue feed via double diaphragm pump Beckhoff controller with Industrial PC and colour screen Programming via WoodWop 5.0, with variable programming Work li ...

Semi-automatic angle welding machine type FP870A Specifications: Welding frame size: 870 x 620 mm passage height: 300 mm film width: 800 mm film roll diameter: 300 mm Automatic welding frame closure Suitable for polyolefins and LDPE films Power up to 900 cycles/hour; depending on machine equipment, product and film. With foot pedal Power supply: 230 V heating capacity: 3.1 kW The machine is still in the original box from the manufacturer. Delivery ex works without installation and commissioning, but can be organized for an extra charge.

Type: Turret punching machine Finn Power Model: C5 YOM: 2007 Capacity: 30 Ton Maximum Sheet Thickness: 8 mm Maximum Sheet Size: 2530x1270 mm Minimum Sheet Size: 300x100 mm Maximum Sheet Weight: 200 kg Number of Stations: 20 Turret Speed: 24 RPM The machine is still working. You can do an inspection. On request, I will send additional information and photos.

Sig PV vacuum coffee packing machine The machine is in good condition and regularly serviced The machine is still in operation Last run 500 g vacuum coffee package There are videos of the machine

CNC control, numeric control, CPU rack made of OKUMA LB 10 OKUMA type OPUS 5000 CPU /IF RACK 9A SKU: E7191-292-325-1 Year of construction 1985 Ser. Nr.: 003184 Dimension W x H x D 390 x 345 x 240 mm The device is still installed ready for operation in an OKUMA LB 10. Further components from OKUMA can be found under stock number: 60403, 60404, 60405, 60407, 60408, 60409, 60410, 60411; used

MRI, Siemens Magnetom TRIO ( A TIM SYSTEM ) - Year of construction 2007 - including HF cabin of the company Schwarz - Plant is under Siemens maintenance contract - still in clinical operation - very well maintained facility with many accessories

BRANDT KDF 660 Profiline single-sided edge banding with joint milling, pre-milling, fine milling, 2-fold corner copying, radius drawing blade, flat-drawing blade and babble units Type: KDF 660 Profiline Specifications: BRANDT KDF 660 Profiline with joints and corner rounds Preheating of the tool stucco IR preheating Edge thickness 0,4 - 15mm Banding height max. 66 mm, with program high adjustment Caps from the roll at 3mm thickness max 45mm height or 0.8 65mm Plate thickness max. 8-60 mm for corner copying max 40mm Control PC20+ link control (loss of contact), with modem for remote service/maintenance 1. Joint unit program Adjustment of the infeed line 2. Bandkapmesser 3a. Radiant heater High-strength bonding by workpiece preheating 3b. Spray anti-adhesive 3c. Quickmelt Glue Mel Mel Application Unit with Quick Change 3d. Leimangabe by means of glue rol ...

4 AXIS CNC GEAR SHAVING, SICMAT – SATIN 100S (Same as 200S) Brand: SICMAT Model: RASO 100S CNC: SIEMENS 810 Workpiece outside diameter: 200 Module range: 0.5-5 mm Workpiece max face width: 100 mm Machine still working Other information: THE MACHINE IS IN EXCELLENT CONDITIONS AND COMPLETE IN ALL ITS PARTS (STILL WORKING)

Brand MARTIN Type T72A Comfort Control panel eye level integrated in the suction supports Saw blade height adjustment: Electric with digital display in the screen Saw blade tilt: Electric with digital display in the screen Parallel stop: NC control with digital display in the screen Parallelogramtic: Aluminium miter table, -46° to 46° digital display, angle-length calculation table Length stop: Aluminium 2,200 mm, extendable up to 3,200 mm with 2 punch stops and digital display Main saw: ø450 mm, cutting height: 170 mm, saw swivelling: 0° - 46° Speed control: 2000/2750/4000/5500 rpm Motor: 5.5 KW Scorer: ø120 mm, 3-axis electric adjustment Motor: 0.75 KW Trolley: 3,300 mm Cutting width: 1,250 mm Suction: Top: ø80 mm, Bottom: ø120 mm weight: 1.600 KG Condition: still to be cleaned, tested, etc.

CLEXTRAL STOLZ Petfood extrusion line a complete double screw extrusion line for petfood, capacity between 1 / 2.5 tonnes per hour. Was stopped end year 2022. Still visible in the layout. Main machines : extruder CLEXTRAL BC82in very good working condition, granulator, conditionner WENGER, coater, dryer all the peripheral.. Information and list of machines on request

We offer, as it is where it is Fruit juice concentrate plant Was running with Juices from Apple, sour Cherry Manufacturer: M&L design is done by ex Gea Wiegand Engineers and was sold through Bucher Still installed, ready to work, in maintained condition Year of manufacture: 1999 Type: Falling film Number of evaporation effects: 4 Water evaporation to/h: 12,7 Inclusive aroma column Combi evaporator, with 120°C pasteurizer Prior sales reserved

We offer, in its current state, from the location Fruit juice concentrate plant Was operated for juices from apple, sour cherry Manufacturer: M&L Construction was realized by ex Gea Wiegand Engineers and sold by Bucher Still installed, ready for operation, in well-maintained, maintained condition Year of Manufacture: 1999 Type: Falling Film Evaporator Number of levels: 4 Water evaporation per hour: 12.7 Including aroma column Combi evaporator, with 120°C pasteurizer Subject to prior sale

We offer, as it is where it is Fruit juice concentrate plant Was running with Juices from Apple, sour Cherry Manufacturer: Unipektin Still installed, ready to work, in maintained condition Year of manufacture: 1990 Type: Falling film Number of evaporation effects --> 5 Water Waterevaporation --> 9 to/h Inclusive aroma column Pre-evaporator Prior sales reserved

We offer, in its current state, from the location Fruit juice concentrate plant Was operated for juices from apple, sour cherry Manufacturer: Unipektin Still installed, ready for operation, in well-maintained, maintained condition Year of Manufacture: 1990 Type: Falling Film Evaporator Number of levels: 5 Water evaporation per hour: 9 Including aroma column With pre-evaporator Subject to prior sale

For sale is a ZF 220 transmission with ratio 1:1.500. The transmission is currently still installed on a Volvo Penta D5A-B TA, but can be disconnected at any time. This display expressly refers only to the gearbox shown.

Vacuum filler SEN Fulla for still drinks with 12 filling valves Walking direction: from left to right

Machine Details Stock-No. 1105-03848 Type of machine Machining Center - Vertical Make DMG DECKEL MAHO GILDEMEISTER Type DMU50 evolution Year of manufacture 2000 Type of control CNC Storage location from location Country of origin Germany Delivery time by arrangement Freight basis from location, free loaded Price Technical details X-Travel 500 mm Y-Travel 380 mm Z-Travel 380 mm turning speeds 20 - 18 000 rpm spindle taper ISO SK 40 DIN 69871 control Heidenhain MILL PLUS rapid travel x/y/z 30 000 mm/min surface area 500 x 380 mm number of T-slots 7 pieces tool length from spindle nose 280 mm weight of the machine approx. 6 t total power requirement 36 kVA Additional information 3 axis B-axis, C-axis control Heidenhain MILL PLUS magazine places: 32, space requirements with swarf conveyor: about L:3,0:W:2,53xH:3,15m Machine still is placed at the customer  ...

Machine has been retrofitted for the personal protection of own fixture construction, with new German CE conformity. Capacity 2500 - 3000 pieces / hour There are still spare parts available. Furthermore, 3to fleece and 1.5 tons of wire and 700kg of strip are available for each type of fleece.

HEADING MACHINE, BAADER 421 Technical description: Machine number: 10-4604-0421 Belt width: 300 mm Lift height: 1050 mm Estimated throughput: 35 fishes/min but varying in accordance with fish size and stillness of the operator Water consumption: 12 l/min Weight: 520 kg Dimensions: 2350 x 1600 x 1750 mm

HADEF crane bridge 3.2 to, 19 m wide, 18m crane runway crane Overhead crane / gantry crane / overhead crane,5 m high, DONGES bridge 19 m wide, full working, German Crane, Year 2003 - Crane already dismantled, chassis can still be dismantled - free loading

USED CENTRIFUGAL MOLECULAR DISTILLATION SYSTEM Manufacturer: MYERS VACUUM, Inc. Model: PILOT 15 LAB Throughput Capacity 10 - 80 lbs/hr (4.5 – 36.3 kg/hr) Type Continuous Pumping system ultimate pressure: 2 X 10-4 Torr Operating Pressure 10 -3 Torr to Atmosphere Mechanical Forepump >11 CFM High Vacuum Pump 320 L/sec of air at 250C. Power: 10-15 KW/ hour 3 phase wye” 115/208 V, 5 wire 50/60 HZ Available for 230, 415 or 460 Volt. Water: (20°C) 2 gal/min (7.6 L/min) Liquid nitrogen consumption: 0.5 liters/ hour (Utility consumptions may vary depending on process conditions) Dimensions: Height 69 Inches (1.75m), Width 34 Inches (.86m), Depth 59 Inches (1.5m) Net Weight 1300 lbs. (590kg) Centrifugal molecular distillation is a purification technique, which has gained wide acceptance in the chemical, food processing, pharmaceutical, and petroleum industries as well as t ...

material width: 1650 mm material thickness: 2,00 mm no. of straightening rolls: 23 sheet thickness - min.: 0,50 mm diam. of the rolls ca.: 53,60 mm straight. rolls-needle bearings: ja / yes between stands ca.: 1750 mm barrel length ca.: 1820 mm straight. speed ca.: m/ min total power requirement: 58 kW weight of the machine ca.: 19,60 t dimensions of the machine ca.: 6,00 x 3,00 x 2,90 m Number - supports 14 (7 x above/7 x below) with support rollers Number - support rollers 174 ( 84 x above / 91 x below) Support roller dia. approx. 112mm Drive power - main drive 55 kW Motorized height adjustment Electromotive tipping device Crowning (support adjustment (below) mechanical/manual) and individually deliverable 1 set of straightening rollers (replacement rollers) diam. 53.68mm Central grease lubrication of the straightening rollers bearing rails Circulating oil lubrication of gears and card ...

No. 5282: 1 Gebr. Spotting press 400 kN Fabr. RICE Type TUS 90 OK 40 Passage 930 x 705 mm Table top 900 x 1280 mm Plunger plate 900 x 1200 mm Installation height 1035 Space requirement approx. 3 x 2 x 3.6 m Transport dimension approx. 4 loading meters, Width 2.20 / height approx. 2.80 Weight approx. 8 tons Still ex works Cologne

For sale: Multi-axis CNC lathe from Hyundai-Wia type LM 1600TTSY + LNS 3-meter bar magazine type Alpha 552. Beautiful versatile CNC lathe with lower and upper turret with 12 positions and intermediate positions each. The upper turret is additionally equipped with a Y-axis with a displacement of 100 mm (+50, - 50 mm). The machine is equipped with two identical spindles with a bar passage of 51 mm and a maximum speed of 6,000 rpm. The maximum turning diameter is 230 mm and the maximum turning length is 705 mm. Driven tool holders can be stored in all positions! The maximum speed on the driven tool is 5,000 rpm. The main motor power on both spindles is 15/11 kW and they are built-in spindle motors! The machine is also equipped with an automatic tool presetting device, a workpiece collecting device, a workpiece extractor for the right spindle, a workpiece discharge conveyor for the finished  ...

Panel size: 630 mm x 630 mm, Number of plates: expanded from 15 to 30 Panel thickness: 50 mm Cake thickness: 25 mm Hydraulics: motorized Filtrate drain: open Weight; 1500 kg (approx.) Pressure: 15 bar (max. feed pressure). The press is still in operation and will be used for industrial wastewater treatment. Discharge chutes below the filter press.

SPINNER TTC 300- 52 SMMCY CNC Lathe YOM 2012 Twin-opposed-spindle, twin-turret lathe Control FANUC 31iT Swing diameter 400 mm Max. turning dia ~200-250 mm Max. turning length 400 mm Travels: X1 180 mm, X2 110 mm, Z 450 mm, Y +40/-40 mm Rapid traverse: X1 15 m/min, X2 15 m/min, Z 24 m/min, Y 15 m/min With C-axis Main Spindle 1: Motor spindle with water cooling With hollow shaft measuring system for C-axis drive mounted directly on the spindle shaft Spindle bore 52 mm Spindle speed 0-5000 rpm/ 19 kW Performance Pmax 23,5 kW Torque 150 Nm Spindle nose A6/DIN Sub-Spindle 2: Motor spindle with water cooling With hollow shaft measuring system for C-axis drive mounted directly on the spindle shaft Can be moved on a slide to take over spindle 1 Spindle speed 0-7000 rpm/ 8 kW Performance Pmax 13,8 kW Torque 189 Nm Spindle nose 100 mm Turret 1: At the top of the ...

Panel size: 630 mm x 630 mm, Number of plates: expanded from 25 to 50 Panel thickness: 50 mm Cake thickness: 25 mm Hydraulics: motorized Filtrate drain: open Weight; 1500 kg (approx.) Pressure: 15 bar (max. feed pressure), Diaphragm pump Closing pressure at the pressure gauge 380 bar Hydraulic; Type GL KES 401-50 Machine dimensions: L 4450 x W 1700 with protective grille x H 1700 mm. Discharge shaft can be taken along. The plant was regularly serviced. The press is still in operation and is used for industrial wastewater treatment. Discharge chutes below the filter press.

We offer various transfer panels for sale. Our transfer panels are made of stainless steel and equipped with butterfly valves, of course food-safe. Partially equipped with sensors. Currently still in stock: 2x DN80 and 1x DN65 The transfer panels were most recently used in the dairy industry.

Te koop: The Normfinisch Turntable blasting machine is suitable for blasting often larger, round products. The products are placed on a turntable and blasted by rotating the table in combination with the oscillating nozzle movement. The turntable is moved outside the cab with a transport system, so that loading with a crane/forklift is possible. The blasting machine is like new. Very little used! Areas of application of the turntable blasting machine are: Burr Shotpeenen Roughen For a uniform blasting result, the products rotate on a turntable The basic system is a manual turntable that can be placed on wheels or not in the cabin Different systems are possible for blasting, from manual to fully automatic with several movable guns. The degree of automation depends on the type and shape of the product Still to be seen under power. The original price was 60,000 euros. Please bid

Complete line for filling TBA 1000 Edge with the following equipment - A3/Flex - Capper 20 - Cardboard packer: TCBP 70 -Conveyors All Tetra Pak equipment in good and running condition. Machines are still installed and producing.

150 litre still with oil firing Operating pressure: 0.6 bar Attachment number: 331 Subject to prior sale - errors possible Ref. No.: D-1170

Frampton FR1-3 Flash roaster Stainless flash roaster, used when pre cooked meats need to have a roast finish, allows products such as hams to be roasted in under 3mins and still cool enough to be packed, ideal for meats, fish, veg and more, belt dimensions 2100mm x 140mm, variable speed, adjustable temp control, mobile, 3Ph

Sm 52 2 25 mil Straight Autoplate all wash units tecnotrans year 2001 still in production