We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,261 used machines on RESALE, but how to find them? Machine Search
used
Fri-Jado mobile rotisserie grill, model: STG7-P, number: 100032062, 400/230 V, 3 Ph, 50/60 Hz, 14.5 A, 9500 W, 7 baskets, dimensions each basket: 600 mm x 150 mm, total dimensions: 1100 mm x 850 mm x 1800 mm.
used
Actuator Heinzmann for engines MWM TCG 2020, type StG 30-01 for Basic System E30.
used
Step regulator, electronic control -Manufacturer: ELREHA -Type: STG-1903 -Type: STG1903 -Number: 2x control cards available -Price: per piece -Dimensions: 70/195/H130 mm -Weight: 0.9 kg
new
Surplus New Hainzmann STG 40-14 Basic System E40 Governor Control Actuator Available in stock.
used
Model: STG 230 GANC Type: SR-230 No. SR-230/070/199 Connection: 3x400V EL Box: ASTP
new
Standard equipment: Drive: V-belt and gear unit combination Automatically elektomagnetischer spindle feed machined base plate with T-slots and coolant system integrated precise mechanical drilling depth setting automatic tool ejector Lighting Motor protection switch with tripping for U Emergency off pushbutton Drill protection with Electr. Hedging Rotary and swivel table Thread cutting device Gear lubrication through automatic oil pump Push button feed at the handle Stepless speed adjustment, frequency-controlled potentiometer and 3-way manual transmission for stage change Technical data: Drilling capacity 50 mm Thread cutting capacity (depending on elevation) M42 Spindle MK IV Depth 200 mm Throat depth 360 mm Column diameter 175 mm Usable surface (pivoting) 550 x 550 mm T - slot size number 3, distance 160 mm Dimension width 16/28 Digital speed display Dri ...
used
The machine is in good technical condition. Round material 260mm. Maintained regularly. Can be shown in operation.
new
Thread cutting device Freischneiden Setup Drilling depth shut off programmable Drilling depth and speed display - digital Thread cutter M20 (depending on elevation) variable speed of 125-4000 U/mon in two stages, stage change of belt apportionment. Drilling capacity 25/30 mm Spindle MK 3 Drilling depth 125 mm Projection 280 mm Usable surface (pivoting) 420 x 340 mm Feed 0-300 mm / min stepless Table height with rack and pinion Machine dimensions (W x D x H) 520 x 820 x 1900 mm Motor three-phase 400 V pole changing bar 0.9 / 1.45 kW Weight 300 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Option: spindle stop and chip fracture module 690 EUR DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER .
new
Thread cutting device Freischneiden Setup Drilling depth shut off programmable Drilling depth and speed display - digital Thread cutting device M30 (depending on elevation) R1 spindle speed with continuous transmission speed series 100-2000 1 / min R2 spindle speed with continuous transmission speed range 70-1400 1/min Drilling capacity 35/40 mm Spindle MK 4 Drilling depth 160 mm Throat depth 300 mm Usable surface (pivoting) 590 x 450 mm Feed 0-300 mm / min stepless Table height with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor three-phase 400 V pole changing bar 1,5/3,0 kW Weight 420 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Option: spindle stop and modulus of rupture of chip 660 EUR DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK ...
used
cutting diameter: 165 mm saw band length: 2400 x 0,90 x 20 mm cutting width: 225 mm band speed: 35 7 70 m/min Capacity 90° rectangular: 225 x 160 mm : 225 x 160 mm : 165 x 165 mm : 165 mm Capacity 90° rectangular: 170 x 100 mm : 155 x 155 mm : 155 x 155 mm capacity 60 degrees: round: 65 mm capacity 60 degrees: flat: 110 y 60 mm capacity 60 degrees: square: 60 x 60 mm total power requirement: kW weight of the machine ca.: 150 kg dimensions of the machine ca.: 1100 x 450 x 1350 mm base: Coolant System: pneumatic clamping: miter device: saw bands: Operating Instructions: manual band saw machine for industrial work developed. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Equipped with material clamp, pneumatic lifting + lowering, including various spare saw belts
used
cutting diameter: 320 mm saw band length: 4335 x 32(34) x 1,1 mm cutting width: mm total power requirement: 3,0 kW weight of the machine ca.: 1,27 t dimensions of the machine ca.: 2,4 x 1,750 x 1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Gear motor, electric motor, three-phase motor, electric gear motor -Power: 0.65 kW -Translation: i = 21.8 -Construction: B14 -Shaft: Ø 17 x 20 mm -Dimensions: 300/190/H140 mm -Weight: 12.8 kg
new
Hainzmann STG2080 GAS GENERATOR FUEL CONTROL SYSTEM WITH Butterfly Available in stock.
used
cutting diameter: 320 mm capacity 90 degrees: flat: 470 x 320 mm capacity 45 degrees: round: 320 mm capacity 45 degrees: flat: 300 x 320 mm capacity 60 degrees: round: 200 mm capacity 60 degrees: flat: 190 x 320 mm saw band length: 4335 x 32(34) x 1.1 mm cutting speed: 20 - 90 m/min total power requirement: 2,53 kW weight: 1296 kg range L-W-H: 2400 x 1506 x 2000 mm Furnishing: - stepless speed adjustment of the saw band - Handwheel for saw band tension - stable machine stand in welded construction - Rotary table for miter adjustment - Fast / precise setting of the miter areas - Quick release material - Material support table with circumferential water channel - clear control panel for electrical and hydraulic central control - coolant device - Required instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
bore capacity in steel (diameter): 16.0 / 20.0 mm throat: 240 mm bore stroke: 100 mm spindle taper: 2 MK table:: 280 x 340 mm turning speeds: 130 - 2000 U/min column diameter: 90.0 mm flute distance: 125 mm T-slots: 2 x 14,0 mm total power requirement: 0.37 / 0.7 kW weight: 125 kg range L-W-H: 500 x 600 x 1900 mm Furnishing: - manual spindle feed - including thread cutting function - continuous speed adjustment (variomatic) - Digital drilling depth display at the front - Work table height adjustable via hand crank & T-slots - V-belt drive - pole-changing motor - EMERGENCY stop button at the front - Front main/toggle switch - Machine swing feet (self-made) - User manual (PDF) Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9103751 Machine video: https://www.youtube.com/watch?v=gTVwBLikpZA The data for this ad was created with ModulMWS - the softwa ...
used
Description: Blade Dimension : 4780x34x1,1 Speed rotation: 22 to 90 rpm Vice: 510 mm Angled cut 0° cylindrical and square cut 320 mm Flat cut 510x320mm 45°+/- cylindrical cut: 320 mm Square cut: 320 mm Flat cut: 320x310 mm 60° +/- Cylindrical cut: 170 mm Square cut: 170 mm Flat cut: 240x170 mm weight approx.: 900 kg, Approx. Onsite Dimension. (l x w x h): 800 x 2,000 x 1,800 mm
used
51 MW - CCGT comprising 3 x 12 MW Solar Gas Turbine generator and 1 x 15 MW steam turbine generator Model : TITAN 130 Capacity : 12 MW Voltage ; 11 KV / 50 Hz Qty : 3 sets Titan 130 + 1 set STG Year : 2012 Running hr : 6000 hrs since new
used
Hydraulic power unit, with piston pump, 5 piston HYDRODYN Type STG pump: 1389-12 Engine: RÜETSCHI ELEKTROMOTORENBAU Type KER 100,2/4/S 2,2 KW 1415 rpm 220 / 380 V 3AC Tank: approx. 30 l used, tested ! Dimensions: 730 x 400 x 630 mm
used
Palloid bevel gear hob, palloid hob, hob KLINGELNBERG REMSCHEID WN 5,5 - 63 - 104 M.: 5,5 Li. ZF. I Stg.: 6°12 , E.: 20° Frtf.: 12,65 6173/74 shaft: Ø 44 / 42, length: 80 mm ( conical ) clamping thread: M14 x 2,0 with wooden transport box New ! Dimensions ( cutter ): Ø 190 x 210 mm Dimensions ( transport box ): 245 x 245 x 250 mm
used
Palloid bevel gear hob, palloid hob, hob KLINGELNBERG REMSCHEID WN 5.5 g 74 S Mn.: 5.5 Vorfr. R. ZF. III Stg.: 5°6 , E.: 20° Frtf.: 12,79 6173/74 Shaft: Ø 44 / 42, length: 80 mm ( conical ) Clamping thread: M14 x 2.0 with wooden transport box New ! Dimensions ( cutter ): Ø 180 x 200 mm Dimensions ( transport box ): 235 x 235 x 220 mm
used
End mills, end mills, milling cutters -four cutter -Rough end mill -Diameter: 25 mm -usable length: 55 mm -Corner radius: 4 mm -Type: STG-160 -Number: 16 pieces -Sale: only complete -Weight: 6.5 kg
used
Heinzmann Actuator StG 30-10 Serial No. 1108034154-30
used
Description: FETTE hobs with shank GREASE 2356808 GN461 DIN3968AAA 002.90 2697.1 02 m³ L1 E= 20° DIN3972 I - Stgs. 1°24 pz9.4276 HN PM3 Approx. Onsite Dimension. (l x w x h): 500 x 200 x 200 mm, weight approx.: 10 kg