steel mill used for sale

Liquid fertilizer / AHL / ASL - Tank tank storage tank storage tank a used storage tank 100,000 litres for storage of liquid fertilizer / AHL / ASL with a brand-new plastic inner shell. The container corresponds to DIN 6616, has 2 saddle feet, is professionally emptied and cleaned inside, incl. ladder. The container receives a brand new plastic inner shell - resistant to the storage of liquid fertilizers - incl. leak warning device mounted in the protective box - see sample photo. ASL (ammonium sulfate solution) is a sought-after liquid fertilizer used in drying plants during the drying of liquid fermentation residues and during exhaust air purification. Due to the corrosive properties of the bearing medium, ASL containers require an inner plastic shell. The inner plastic sleeve has a "General Building Supervision Approval" and is therefore AHL for the storage of ...

Sell Steel pipes DN 1200 wall thickness 20 mm, outer PE sheathed and coated inside and elbows DN 1200 Steel pipes DN 1000 wall thickness 14.8 and 16.8 mm, outer PE coated and internal coated Elbows DN 1000 from 10 to 45°

VA stainless steel tank approx. 4000L with frame frame used Pressure tank filter tank suction air filter dust filter Tank height total approx. 2600 mm - of which approx. 700 mm funnel Tank diameter approx. 1600 mm Volume approx. 4000 litres Connection openings approx. 300 mm Connection flanges approx. 445 mm Flap on the side approx. 800 x 500 mm with lattice insert/dust grate in the inner bottom and top with bracket for dust filter very stable design Total L/W frame approx. 3100 x 2130 mm Total height approx. 3600 mm Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Conveyor belt

Tank system, diesel tank, fuel oil tank, storage tank with 5,000 litres of content - brand new - according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole with dome lid and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 2.80 m - D = 1.60 m - weight approx. 1.5 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repainting - RAL hue / at an addition ...

The brand new container corresponds to DIN 6616, has 2 saddle feet, an ascent ladder and is primed on the outside - on untreated sheets. D = 2.50 m - L = approx. 10.70 m. The container receives a brand new plastic inner shell incl. leak warning device mounted in the protective box - see sample photo. The inner plastic sleeve has a "General Building Supervision Approval" and is therefore used for the storage of liquid fertilizer AHL nox reducing agent AUS 32 (AdBlue). The price is ex works - freely charged. We recommend: Above containers sandblasting from the outside, prime and completely repaint - iron grey / RAL hue. (On request, other RAL colours are also possible!) ASL (ammonium sulfate solution) is a sought-after liquid fertilizer used in drying plants during the drying of liquid fermentation residues and during exhaust air purification. ASL container  ...

- brand new - according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole with dome lid and is fitted with the following fittings equipped: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 5.30 m - D = 1.60 m - weight approx. 2.4 to. - ex works, freely charged - The container is sandblasted from the outside, primed and completely repainted - iron grey / RAL hue. (On request, other RAL colours are also possible!) general: You will receive an invoice with  ...

Various steel sheets and wooden wagons with wheels Length 1350 - 1700 mm x width 400 - 860 mm x height 1040 - 1720 mm Price: EUR/piece 28,- net + VAT approx. 10 transport aids 1110 x 600 mm Price: EUR/piece 15,- net + VAT

60,000 litres of earth tank - new from the factory - single-walled - for storing rainwater, service water, extinguishing water, etc. on request with extinguishing water suction connection DIN 14230 Dimensions: D = 2,50m - L = 12,80m The container is equipped with a high-quality POLYURETHANe coating on the outside and has a manhole DN 600 with dome lid, screws and seal. On request, the container can be fully equipped with a extinguishing water suction connection, the container then meets the requirements of DIN 14230 - underground extinguishing water tank: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: - 1 pc. suction line DN125 made of stainless steel - V2A - 1 pc. extinguishing water suction connection, overfloor, according to DIN 14244 - Form B, incl. A-fixed coupling according to DIN 1 ...

80,000 litres of earth tank - brand new - single-walled - for storage of rainwater, service water, extinguishing water, etc. on request with extinguishing water suction connection DIN 14230 Dimensions: D = 2,90m - L = 12,80m The container is equipped with a high-quality POLYURETHANe coating on the outside and has a manhole DN 600 with dome lid, screws and seal. On request, the container can be fully equipped with a extinguishing water suction connection, the container then meets the requirements of DIN 14230 - underground extinguishing water tank: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: - 1 pc. suction line DN125 made of stainless steel - V2A - 1 pc. extinguishing water suction connection, overfloor, according to DIN 14244 - Form B, incl. A-fixed coupling according to DIN 14319 and ...

Construction & Dimensions Floor space: Hall 15.35 m x 24.49 m plus canopy (depth 3.82 m). Roof pitch: The gable roof has an inclination of 15° (canopy 10°). Weight estimate: The steel structure is estimated to be approx. 18 to 22 tons (pure steel weight without cladding). This serves as the first basis for your logistics planning. Base & façade The hall was originally mounted on a 40 cm high clinker brick base. Since this is omitted during dismantling, a corresponding plinth (e.g. made of precast concrete elements or masonry) would have to be prepared on site for the reuse of the original wall panels before reassembly in order to maintain the connection heights of the façade. Foundation & Clearance Areas Foundation planning: The hall was founded on strip foundations with a 15 cm base slab. Since the soil conditions at your new location can vary, the foundation statics s ...

T9 - used approx. 20 m³ / 20,000 ltr steel tank with coated inside, standing upright. technical details: capacity: approx. 20 m³ / 20,000 litres material: steel tank with inner coating dimensions: Ø approx. 2.55 m × total height approx. 5.70 m Used steel tank with inner coating, professionally cleaned and in good condition. Standing, above-ground storage tank on 4 steel feet, lid on top of the roof and down at the tank bottom, several inlets and outlets. Steel rack and matching ladder available at an additional cost. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertise ...

(Exhibition model) - Material : DIN 1.4301, upper bottom and dome made of DIN 1.4404 - Surface, inside: III d, weld seams pickled and ground - Exterior surface : marbled - Capacity : approx. 2400L Dimensions : - Depth : approx. 1310 mm - Width : approx. 1080 mm - Cooling jacket height: approx. 1750 mm - Height of the shelves : approx. 450 mm - Total height : approx. 2570 mm Equipment : - 4 adjustable feet - Rectangular manhole 420x320 mm - Residual drain with disc valve NW40, Fredrich no 2 NW40 - Clarification drain with ball valve NW40, Fredrich no 2 NW40 - Stand display - Sampling - Thermometer, digital - Double jacket with piping pulled upwards - Labeling board - Ladder bracket - Dom NW 300 Vent Nozzle NW 50 - Crane straps

Exhibition model) - Material : DIN 1.4301 - Inner surface: IIId, welds stained and ground - Outer surface: Sheath sanded-SBR - Volume : approx. 1940L Dimensions: - Diameter : approx. 1110 mm - Sheath height : approx. 2000 mm - Ground clearance: approx. 400 mm - Total height with boom : approx. 2900 mm Equipment : - 3 adjustable feet - Rectangular door 420x320 mm - Residual drain with ball valve NW50, DIN 11851 - Clear drain with ball valve NW50, DIN 11851 - Stand indicator with handwheel - Sampling with handwheel - Dip shaft sleeve with digital thermometer - Pillow plate - Holder for labeling board - Ladder bracket - Mobile lid with NW50 connection, pump and air hose - Winch to lift the lid

Heavy-duty wheels, swivel castors, castors, solid rubber castors Outer diameter: 240 mm Bore: 30 mm Rubber thickness: 30 mm Quantity: 90 Sold as shown All information without guarantee

Stainless steel tunnel pasteurizer - new Hermis type TP 20 capacity: 22.000 cph - 500 ml Product: beer Year of manufacturing: 2025 Treatment area: 74 m² Number of modules: 7 pcs Treatment length: 13.500 mm Total number of zones: 10 pcs Total width: 6.500 mm Total length incl. infeed / discharge conveyor: 15.000 mm Total number of zones: 10 pcs Heating system: Plate heat exchanger outside of the pasteurizer Steam pressure: 3 bar Electrical system: Siemens S 7 - 1200 The main conveyor of the pasteurizer is made of plastic - Movex - Italy Active transfer - Rexnord - Holland Plate heat exchanger in outside of pasteurizer - Funke - Germany Pumps, stainless steel - Lowara - Italy Spray Nozzles - Lechler - Germany Steam valve - Burket - Germany Air supply system - SMC - Germany Electro peumatic - Fest - Germany Electrical control - Klöckner / Möller or ...

Auction-ID: A1-44302-162

Stainless steel tank 3500 litres with SCABA agitator and measuring technology Manufacturer: SCABA Tank Type: Stainless Steel Tank with Agitator Volume: 3500 l Year of Make: 1997 Quantity available: 2 pieces Agitator: SCABA Motor power: 0.37 kW Degree of protection: IP55 Load cells: FLINTAB Type: SB4-5kN-GP Metrology: Endress+Hauser Liquiphant Power supply: 10-55 V DC Equipment and accessories Agitator completely assembled Internal mixing system with stirring blade Manhole with lid Filling opening with grid insert Level sensor Endress+Hauser Liquiphant FLINTAB load cell system integrated in the base frame Outlet at the bottom with connection

: 28 min. Punching force: 110 to : 40x20 mm flat steel: 600x15 oder 400x20 mm L-beam 90°: 160x160x16 mm L-beam 45°: 70x70x7 mm : 50 mm square edge steel: 50 mm : 13 mm throat: 300 mm Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for bar cutter - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 40 mm diameter - Rectangle notch compl. with hold downs - Complete knife set below for rectangular notching - Upper tool for rectangular notching - Support table for flat material - Punching table with stop - Notch with stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

flat steel: 350 x 10 mm round bar steel: 35 mm square edge steel: 30 mm L-beam: 80x80x8 mm hole diameter in sheet thickness: Ø 27 in 13 bzw. Ø 20 in 8 mm : 500 kN throat: 177 mm : 34 (Hub 15mm) blade length: 356 mm engine output: 3.0 kW weight: 950 kg dimensions: 1300x1100x1850 mm Standard equipment: - Knife set for flat steel - Complete knife set for angle steel shears - Complete normal punching equipment - Quick release device for punches up to 31 mm - Support table for punching device, rectangular notching and flat steel shears - Bending stamp with matrices V 40 and V 70 - Electric contact stop (1.000 mm) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 32 /min Punching force: 60 to throat: 500 mm : 40x11 mm : 350x15 mm : 350x15 mm L-beam 90°: 120x120x10 mm : 45 mm square edge steel: 40 mm : 10 mm : Aufnahme bis max. 150x10 engine output: 5,5 kW weight: 2012 kg Basic equipment: - Flat steel shears with knife set - Angle shears with knife set - Punch with quick release device for punches up to 40 mm - Support table for punching device - Triangular notching device - Support table for notching - bending station - Bending stamp with matrices V 40 and V 70 - electrical contact stop (1 meter) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 32 /min Punching force: 60 to throat: 250 mm : bis max. Ø 40x11 mm : 350x15 mm : 350x15 mm L-beam 90°: 120x120x10 mm : 45 mm square edge steel: 40 mm : 10 mm : Aufnahme bis max. 150x10 engine output: 5,5 kW weight: ca. 1600 kg Basic equipment: - Flat steel shears with knife set - Angle shears with knife set - Punch with quick release device for punches up to 40 mm - Support table for punching device - Triangular notching device - Support table for notching - bending station - Bending stamp with matrices V 40 and V 70 - electrical contact stop (1 meter) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching force: 45 t hole diameter in sheet thickness: Ø 27x13 mm : 24 /min L-beam 90°: 80x80x8 mm L-beam 45°: 60x60x6 mm flat steel: 200x13 mm : 7 mm engine output: 2,2 kW weight: 760 kg Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 27 mm diameter - Rectangular notching device compl. with hold down - notch - Support table for punching device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 10 mm Punching force: 55 to : 40x10 mm flat steel: 300x15 oder 200x20 mm L-beam 90°: 120x120x10 mm L-beam 45°: 70x70x7 mm : 40 mm square edge steel: 40 mm : 37 /min. throat: 250 mm weight of the machine ca.: 1.600 kg Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for bar cutter - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 40 mm diameter - Rectangle notch compl. with hold downs - Complete knife set below for rectangular notching - Upper tool for rectangular notching - Support table for flat material - Punching table with stop - Notch with stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 45 to. no. of strokes: 24 Hub/min hole diameter in sheet thickness: max. Ø 27 in 13 mm : 80x80x8 : 60x60x6 mm flat steel: 300x10/200x13 mm : 7 mm engine output: 2.2 kW range L-W-H: 1550x820x1540 mm weight: 760 kg Standard equipment: - Complete knife set for flat steel shears - complete knife set for angle steel shears - complete standard punching equipment - Stamp quick release device for punches up to Ø 27 mm - Rectangular notching device complete with hold-down device - notch - Support table for punching device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel diameter: 350 mm no. of working stations: 2 grinding wheel width: max. 125 mm work piece support: jeweils 470 x 260 mm dimensions l/w/h: 1,32 x 0,78 x 1,3 m - work piece support can be swivelled - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel diameter: 200 mm no. of working stations: 2 Stück turning speeds: 2800 U/min dimensions of grinding wheel: mm grinding motor: 0,55 kW shaft cross cut: 32x40 mm total power requirement: kW weight of the machine ca.: 250 kg dimensions of the machine ca.: 1 x 0,6 x 1,2 m - Swing table 420 x 220mm - on the side. Movement 40mm - infeed against grinding wheel 70mm - Degree of inclination 30 ° - Grinding guide grinding device - Inclination of the mounting bracket 20 ° - Adjustment of the mounting bracket 45 ° - Infeed against grinding wheel 80mm - Height adjustment 90mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Thickness: 16 x 16 mm number: 4 Stähle weight: 3 kg dimensions: 300m x 200 x 50 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 45 mm square edge steel: 42 mm L-beam: 140 x 13 mm flat steel: 350 x 20 mm pressure: 550 kN throat: 305 mm notching: rectangle tool: mm total power requirement: 5,5 kW weight of the machine ca.: 1260 kg dimensions of the machine ca.: 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

5 Rhymes steel external silos Ø 2,800 mm Content 51m³ = 30 tons of flour per silo Height per silo 12,500 mm Silos stand on frame for sale Price on request Phone +49 172 8345457

Feed tank made of stainless steel with a total capacity of 120 liters. Flat top bottom with flange for feeding and venting. Body with ENDRESS + HAUSER max/min level sensors Conical bottom with discharge from the bottom. About 2 posters Specifications: Volume 120 liters total Background type Conical Envelope 2 posters Outer diameter body 500 mm Body height 600 mm

Vertical condensate accumulator tank made of stainless steel with a capacity of 100 liters. Top klopper bottom with flange type connections. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Material Stainless steel Specifications: Volume 100 liters total Background type Klopper Envelope 4 legs Outer diameter body 450 mm Body height 570 mm