steel line used for sale

Weld-on hinge with steel pin, weld-on tape, 23 pieces PAGUS 80 x 13 mm Total length: 80 mm Diameter: Ø 13 mm Lug width: 15 mm Steel pin: Ø 8 x 23 mm Brass disc: Ø 8 / 13 x 2 mm Other quantities on request ! New ! Dimensions ( weld-on hinge ): 82 x 15 x 13 mm Dimensions ( packaging ): 125 x 85 x 45 mm

Weld-on hinge with steel pin, weld-on tape, 70 pieces PAGUS 60 x 10 mm Total length: 60 mm Diameter: Ø 10 mm Lug width: 12 mm Steel pin: Ø 6 x 18 mm without brass washer ! Other quantities on request New ! dimensions ( weld-on hinge ): 61 x 12 x 10 mm Dimensions ( packaging ): 150 x 75 x 70 mm

Screw hinge with steel pin, hinge, 10 pieces PAGUS 43 x 38 x 32 mm Opening angle: approx. 200° screw-on strap: 42 x 25 mm hole spacing: 25 mm, 2x countersunk hole: Ø 6,5 mm steel pin: Ø 6 x 10 mm with brass disc ! Material: Aluminium Other quantities on request ! New ! Dimensions ( weld-on hinge ): 43 x 38 x 32 mm Dimensions ( packaging ): 220 x 200 x 40 mm

Control cabinet, modular system TS 8 RITTAL TS 8451.600 ( TS8451.600 ) 1200 x 600 x 2200 mm 2 doors without side panels can be combined with S377 4-, 6- or 8-door stainless steel - control cabinet Dimensions: 1200 x 600 x 2200 mm

Control cabinet, modular system TS 8 RITTAL TS 8451.600 ( TS8451.600 ) 1200 x 600 x 2200 mm 2 doors a side panel can be combined with S376 4-, 6- or 8-door stainless steel - control cabinet Dimensions: 1200 x 600 x 2200 mm

Control cabinet, PC cabinet, control cabinet PAGUS 1980 x 820 x 600 mm with keyboard drawer in writing desk and 2nd drawer installation option for PC and monitor stainless steel - control cabinet Dimensions: 1980 x 820 x 600 mm

Stainless steel plastic work table PAGUS Table surface: 1270 x 590 mm with perforated grid ! stainless steel frame ! shelf changeable cable duct at the back Dimensions: 1300 x 700 x 790 mm

Tank, container WABAG / LUDWIG EDEL 43.9631.46.01 capacity: 7600 litres built: 1991 zul. Operating pressure: 0.1 bar zul. Operating temperature: 40°C Diameter: Ø 2330 mm stainless steel ! used, tested ! Dimensions: 2590 x 2450 x 2300 mm

Stainless steel basket, immersion basket Pagus Inside dimensions: 480 x 315 x 55 Mesh size: 8 x 8 mm stainless steel ! net slightly damaged ! Dimensions: 500 x 330 x 400 mm

Steel winch, rack and pinion winch, stick winch DKF STEHLAGERWERK Type 1010 Load capacity: 10.0 t Attachment height: 90 / 700 mm stroke: 300 mm used, tested ! Dimensions: 700 x 450 x 230 mm

Stainless steel expansion joint, pipe connector, flexible connection pipe TOKYO NISSHIN JABARA (TNJ) DN 80 width 615 mm Flange: Ø 200 mm stainless steel ! Dimensions: 200 x 220 x 615 mm

Cocking lever OTTO GANTER (probably) 10 pcs. Steel clamping lever adjustable M16 / 80 mm (GN 212.3-33-M16-80-D) 180 x 150 x 35 mm New Dimensions: (total) approx. 200 x 200 x 200 mm

Lattenbreithalter M.; T.L. Lattenbreithalter Edelstahl 3600 2352.8611 069.670 .6-19 Diameter: Ø 153 mm Storage: 120 x 120 mm hole spacing: 80 x 80 mm New ! Dimensions: 3800 x 170 x 170 mm

Lattenbreithalter M.; T.L. Lattenbreithalter Edelstahl 3700 2352.8611 069.670 .6-19 Diameter: Ø 153 mm Storage: 120 x 120 mm hole spacing: 80 x 80 mm New Dimensions: 3900 x 170 x 170 mm

Steel winch, rack and pinion winch, stick winch DKF STEHLAGERWERK Type 0310 Heavy version load capacity: 3.0 t Attachment height: 70 / 700 mm stroke: 400 mm used, tested ! Dimensions: 710 x 220 x 210 mm

Stainless Steel Welding Wire, MIG Wire Electrode, Solid Wire AVESTA 316LSI/SKRSI DIN 8556 SG X 2 CRNIMO 19 12 W.-No. 1.4430 Diameter: Ø 1.6 mm Spool: Ø 300 mm Quantity: 12 kg New ! Dimensions: 310 x 110 x 300 mm

Stainless steel welding wire, MAG wire electrode AVESTA 316L-SI/SKR-SI DIN 8556 SG X 2 CRNIMO 19 12 W.-No. 1.4430 Diameter: Ø 1.0 mm Spool: K300 Quantity: 15 kg New ! Dimensions: 310 x 110 x 300 mm

Profile steel scissors, hand lever scissors SCHERENBAU NOSSEN ScDH 10 Knife length: 180 mm round: 24 mm square: 22 mm angle: 60 x 7 mm throughout: 10 mm mobile ! used, checked ! Dimensions: 1300 x 700 x 1600 mm

Stainless steel ball valve, 2 pieces, for use with pneumatic valve actuators PAGUS DN15 R1/2 F03/F04 drive: 9 x 9 mm Adapter: 14 x 14 mm Flange: 45 x 45 mm Material: Stainless steel (1.st 4408) New Dimensions(one ball valve): 75 x 50 x 80 mm

Stainless steel ball valve PAGUS DN20 PN64 installation length: 102 mm Connection flange: Ø 50 mm Material: stainless steel used, tested ! Dimensions: 195 x 50 x 95 mm

FES valve made of stainless steel, with threaded ring FLUX-GERÄTE GmbH FES valve: 10-001 14 192 pump diameter: Ø 41 mm threaded ring: 10-001 14 329 male thread: S 57 x 4 used, tested ! Dimensions: 82 x 72 x 112 mm

FES valve made of stainless steel, with threaded ring FLUX-GERÄTE GmbH FES valve: 10-001 14 192 pump diameter: Ø 41 Thread valve outlet: G 1/4 Threaded ring: 10-001 14 329 male thread: S 57 x 4 used, tested ! Dimensions: 92 x 72 x 112 mm

FES valve made of stainless steel, with threaded ring FLUX-GERÄTE GmbH FES valve: 10-001 14 192 pump diameter: Ø 41 mm Thread valve outlet: G 1/4 Threaded ring: 10-001 14 325 male thread: G 2 used, tested ! Dimensions: 92 x 72 x 105 mm

FES valve made of stainless steel, with threaded ring FLUX-GERÄTE GmbH FES valve: 10-001 14 192 pump diameter: Ø 28 mm ( welded-in reduction ) threaded ring: 10-001 14 329 male thread: S 57 x 4 used, tested ! Dimensions: 82 x 72 x 113 mm

Stainless steel ball valve, 1-piece, reduced passage, 6 pieces SERTO SO BV 58D00-1/2 068.8061.080 DN15 PN130 installation length: 65 mm width across flats: 28 mm connection thread: G 1/2 inch reduced passage: Ø 9.2 mm Material: Stainless steel (1.4408 ) New ! Dimensions ( single ball valve ): 135 x 31 x 71 mm Dimensions ( packaging ): 205 x 160 x 95 mm

Stainless steel ball valve, 3-part, full bore, with welding ends MECAFRANCE, MF DN40, PN40 installation dimensions: approx. 65 mm pipe inner diameter: Ø 30 mm length hand lever: 180 mm Material: stainless steel used, tested ! Dimensions: 290 x 61 x 95 mm

Stainless steel ball valve, ball valve, 3 parts, full passage MECAFRANCE, MF DN25, PN40 installation dimensions: 85 mm thread: G 1 ( inch ) length hand lever: 160 mm material: stainless steel ( 1.4408 ), seal of the spindle: PTFE used, tested ! Dimensions: 203 x 63 x 95 mm

Stainless steel ball valve, ball valve, 3 parts, full passage MECAFRANCE, MF DN40, PN40 installation dimensions: 110 mm thread: G 1 1/2 ( inch ) length hand lever: 200 mm material: stainless steel ( 1.4408 ), seal of the spindle: PTFE used, tested ! Dimensions: 265 x 79 x 180 mm

Profile steel shears, hand lever scissors NOSSENER MASCHINENBAU ScDH 10 Knife length: 180 mm Cutting capacity: Sheet metal: 10 mm Flat bar: 50 x 15 mm Round steel: Ø 24 mm Square profile: 22 x 22 mm Angle profile: 60 x 7 mm T profile: 60 x 7 mm Mounting foot: 405 x 240 mm used, tested ! Dimensions: 650 x 290 x 1850 mm

Compressive force max.: 55 kN Projection: 175 mm Punching stroke adjustable: 0 - 28 mm Number of strokes at 15 mm stroke: 30 Adjustable notch stroke: 0 - 60 mm Hydraulic drive: 380 V, 3 kW Required space: 1170 x 620 x 1470 mm Weight: 930 kg

Steel winch, rack and pinion winch, stick winch HEIDKAMP Model 10 Payload: 5000 kg ( 5,0 t ) stroke: 300 mm attachment height: 80 / 720 mm lifting height: 380 / 1020 mm crankpin: Ø 70 x 70 mm attachment surface: 110 / 70 mm Base: 170 x 150 mm used, checked ! Dimensions (upright): 350 x 210 x 720 mm

The scope of delivery includes: 01x Flat steel, used Material color: sendzimir galvanized Total length: approx. 2,580 mm overall width: approx. 43 mm Drill holeØ: approx. 8 mm Material thickness: approx. 2.80 mm - Incl. a turnbuckle Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

The scope of delivery includes: 01x Flat steel, used Material colour: grey Total length: approx. 2,400 mm overall width: approx. 35 mm Drill holeØ: approx. 12 mm Material thickness: approx. 5.00 mm - Incl. a turnbuckle Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

Max. punching and shearing capacity: 500 kN Punches e.g. 20 mm holes in 20 mm steel Shears on the flat steel shears on 350 mm to 13 mm steel Further technical data on request With an assortment of punches and dies as desired

Steel drip tray, wheelchair accessible PAGUS 2510 x 1020 mm total height: 310 mm Tub length ( inside ): 2500 mm Tub width ( inside ): 100 mm Tub height ( inside ): 205 mm Collection volume: approx. 500 l 2x Grating: 1000 x 1000 x 35 mm 1x Grating: 1000 x 500 x 35 mm grid size: 30 x 30 mm used, tested ! Dimensions: 2510 x 1020 x 310 mm

Double locker made of metal Specifications: Material: metal, lacquered External dimensions: H185 x W60 x D50 cm 2 lockable doors with matching key Compartments with top parcel shelf and hooks for clothes with ventilation slots on each door at the top and bottom solid, welded design no cheap imported goods, Made in Germany! Equipment is in Stock, available now! The lockers are stored dry, in the building! Price is per piece. Condition see original pictures.

1 of used CCT Cylindro Conical Tank / DPV Dual Purpose vessel, manufactured by Staes of Belgium, vertical cylindrical conical stainless steel vessel mounted on four legs. Overall height approx. 5.162 mm, OD 2.000 mm, ID 1.850 mm, 6.500 liters working / fermenting capacity (approx. 8.000 liters brim full), SWP 3 Bar, CE and PED compliant. Top and side entry manway, C.I.P Pipe and a selection of valves and fittings. 9 available (3 of which with top and side entry manway, and 6 with side manway only).

Punching force: 400 kN (e.g. punches 20 m in 15 mm steel) Cuts 150 x 10 mm on the flat steel shears Foot switch for stroke release Quick-change device Assortment of tools is included in the price

Measuring and marking plate, measuring table Cast steel strongly ribbed STIEFELMAYER of a measuring or scribing machine with hand-held measuring arm Year of construction 1985 Length 2000 mm Width 1500 mm Thickness 350 mm Plate thickness (top) 50 mm solid material with 300 mm ribs Working height approx. 800 mm - manually movable with measuring arm , measuring range X=1490 mm, Y = 1000 mm, Z = 1250 mm - with 3-axis digital display Grundig MZ 1030 - machined side surface at 90 angles to the table surface, 2000 x 350 mm - 5 pieces height-adjustable feet Space requirements L x W x H 2000 x 1500 x 2500 mm Weight approx. 2600 kg good condition; used

Offer 23278 Specifications: - Sheet metal and flat steel shears, knife length 175 mm - cuts flat steel up to 50 x 15 mm - or up to 140 x 8 mm - Profile - steel bar shears - cuts - angle steel up to 80 x 8 mm - Round steel up to 28 mm - Square steel up to 25 mm - Hole punch - punching force 275 KN - Stroke 24 mm - Projection 155 mm - perforated in steel up to 20 Ø in 10 mm - or up to 27 Ø in 6.5 mm - Drive 400 V / 3 kW - Space requirement approx. W 500 x H 1500 x D 855 mm - Weight approx. 450 kg - various punches + matrices

Used lifting mixer HABEMFA for 50 kg dough - Stainless steel boiler - for 30 kg of flour or 50 kg of dough - Stainless steel kneading arm - with protective grille - 2 forward gears - 1 stop button - repainted - technically tested, cleaned - very nice condition - immediately ready for use. Inspection and test run are possible by arrangement.

Specifications Type: KBLH 700 Dimensions (LxWxH): 1850 x 680 x 2050 mm Working height: 700 mm Cutting length: 510 mm Knife length: 520 mm Max. shear cross-section: 3500 mm Stroke of the scissors, infinitely variable: 0 – 45 Max. stroke number of scissors: 11 PMG knife for: L-steel 90°+45°/ T-steel 90° Required power : 8.5 kW Weight approx.: 2950kg

Key data: 50 mm, 152 mm

Universal Ironworker RobustStrong machine Punching capacity 1100 kN max. punching capacity diameter 40 x 20 mm, Throat 610 mm Flat steel up to 600x15 mm or 400x20 mm Angle 152x152x13 mm Round steel 50 mm Drive power approx. 9 kW Strokes per minute 28 / stroke = 20 mm max. stroke 80 mm Weight approx. 3300 kg Incl. Large support table for punch 700 x 550 mm Notching station with table 550x350 mm electric contact stop, 2 foot switches various stamps and matrices Manual, CE Conformity

Specifications: - Printing capacity 25 t - Flat steel shears - Flat bars up to 100 x 11 mm - or: 60 x 10 mm - Sectional steel shears - L- and T-blade at 90° 80 x 8 mm - at 45° 50 x 6 mm - Bar steel shears for round steel + square steel - Clinker with square notcher for sheet metal up to 8 mm - Stroke rate 30 1/min - Drive 380 V / 1.5 kW - Space requirement approx. W 800 x D 1000 x H 1600 mm - Weight approx. 650 kg

Qty. 1 Second-hand vertical fermentation tanks Mfc.: Holvrieka, Schmidding, Ellinghaus Built: 1991, 1996 Capacity: 24 x 1450 hl & 4 x 237 hl N° Name Producer Year Data Comments 1 Fermentation tanks Holvrieka 1991 1450 hl 2 tanks 2 Fermentation tanks Schmidding 1996 1450 hl 16 tanks 3 Fermentation tanks Ellinghaus 1991 1450 hl 6 tanks 4 Fermentation tanks Ellinghaus 1991 237 hl 4 tanks

stainless steel cabinet, work cabinet PAGUS 1150 x 600 x 860 mm work surface: 1150 x 600 mm with backsplash ( 100 mm ) working height: 860 mm 3 drawers: 530 x 560 x 150 mm (width x depth x height) 1 compartment with door: 400 x 510 x 6100 mm (width x depth x height), 1 shelf ( fixed ) height upper compartment: 230 mm height lower compartment: 330 mm lockable, without key used, tested ! Dimensions( transport ): 1150 x 650 x 960 mm

• Useful capacity 2245 l • Material 1.4404 • Operating temperature 30°C • Manhole cover top Ø 500 mm • Concave tank bottom • Drain at bottom centre NW 30 • Drain at the side NW 50 • Formerly storage tank for PW plant

Milk tank with cooling unit, without automatic cleaning machine Nominal capacity: approx. 4100 l Material: Stainless Steel Dimensions (LxWxH):approx. 3.55 x 1.80 x 1.70 m Availability: as of now

filter plate suitable for SEITZ Orion filter 400x400 S1 first plate More then 300 machines new and second hand on our seema .de

• Mixing tank for suspensions • Useful capacity approx. 500 l • 1 agitator blade in the centre of the base with rubber wipers • Stirring blade speed fixed 18/min • 2 fixed guide rods • 1 drain at the side in the bottom Ø 200 mm with swivelling valve • Bottom flat slightly inclined • Drive 380V/50Hz, 3,6kW • Standing on 4 feet