steam unit used for sale

Inverters Model No.: ACS800-104LC-0700-7 +E205 Manufacturer: ABB The part is technically in good condition, but this is a used item that shows or may show signs of wear. Internal number: 622 056 257398513187 622 055 257398515598

feed pressure: ? 60 / 80 bar liter capacity: ? l power capacity: 4 kW tank: 250 l weight of the machine ca.: 0,3 t dimensions of the machine ca.: 900 1050 1100 (2100 ) mm Inclusive: - Hydraulic diagram ! - External valve block - Central lubrication The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 160 / 180 mm Control: NC total power requirement: ? kW weight of the machine ca.: 120 kg dimensions of the machine ca.: 500 x 230 x 270 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 70 bar liter capacity: - l tank: 80 l power capacity: 2,2 kW weight of the machine ca.: 400 t dimensions of the machine ca.: 0,83 x 0,6 x 1,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

carrying capacity: 250 kg number of suction cups: 6 suction cup dia.: 215 mm Vacuum lifter VH 6-250 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. is routed to the lifting device nex ...

thread dia.: M6 - M36 turning speeds: 30 - 150 U/min working area: max. 1200 R angle adjustable from - to: 0 - 90 Grad voltage: 230 V engine output: 1200 W weight: 65,0 kg - Includes quick-change chuck - for use with taps - for through holes and blind holes - Swivel motor unit for thread cutting - at any desired angle between 0° and 90° - Higher accuracy compared to manual thread cutting - Thread is guaranteed to be right-angled (90°) - High productivity - significant time savings compared to manual thread cutting - Quick-change chuck with integrated slip clutch - Includes swivel arm with large radius - for easy positioning of the tap on the workpiece - Highly economical due to low investment and maintenance costs - For thread cutting in steel, stainless steel, aluminum and non-ferrous metals Scope of delivery - Operation via touchscreen - Digital drilling depth display - Quick-change ...

JUNG OTA 76 (optique) ist ein Teilapparat mit Reitstock, konstruiert für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsmaße: Spitzenhöhe 76 mm, Spitzenweite 160 mm, Spindelaufnahme 3 CM. Technische Daten: Abmessungen L×B×H 720×210×215 mm. Ausgelegt zur Erzielung enger Toleranzen; geeignet für Präzisionsbranchen wie Optik, Uhrmacherei und Werkzeugmaschinenbau. Technische Daten ohne Gewähr

FEHLMANN AT 100 NC ist ein Teilapparat hoher Präzision, entwickelt für hohe Genauigkeit und Zuverlässigkeit beim Teilen/Indexieren. Betriebsdaten: Spitzenhöhe 100 mm; Länge 380 mm; Breite 160 mm; Höhe 300 mm; Eigengewicht 32 kg; Auflösung: °. Kernangaben: Eigengewicht 32 kg; Abmessungen LxBxH 380x160x300 mm. Zur Erzielung enger Toleranzen; geeignet für Automotive, Uhrmacherei, Werkzeugbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

OLAER CW 19 NBSQC ist ein Oelkühlgerät ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Betriebsdaten: Abmessungen – Länge 700 mm, Breite 450 mm, Höhe 360 mm. Hauptspezifikationen: Anschluss 50 Hz 3x: 400 Volt; Leistung der Heizung 2 kW; Maschinengewicht ca. 48 kg. Ermöglicht enge Toleranzen; typische Anwendungen: Automobil, Werkzeugmaschinen, Hydraulik, Luftfahrt. Technische Daten ohne Gewähr

STUDER ist eine Kühleinrichtung, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Betriebsdaten wie Durchmesser oder Verfahrwege sind nicht angegeben. Technische Hauptdaten: Eigengewicht 500 kg; Abmessungen L 1400 mm x B 1000 mm x H 2300 mm. Keine speziellen Zusatzausrüstungen angegeben. Eignet sich zur Erzielung enger Toleranzen und findet Anwendung in Branchen wie Automotive, Luftfahrt, Medizintechnik, Uhrmacherei und Maschinenbau Technische Daten ohne Gewähr

Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG unit carrier for milling units -with heavy leadership -laterally movable -with counter -Table height: 278 mm -Table surface: 1600 x 295 mm -Table thickness: 18 mm -Price: per piece -Number: 2x available -Dimensions: 1600/295/H278 mm -Weight: 170 kg

sheet width: 1.250 mm plate thickness: 1,0 mm cutting speed: 10 m/min blade shaft - diameter: 70 mm Working width: 1,250 mm Sheet thickness, steel: max. 0.8 mm with 3 pairs of knives Sheet thickness, copper: max. 1.0 mm with 3 pairs of knives Knife shaft: Ø 70 mm Number of knife pairs: 3 Cutting / feed speed: approx. 10 m/min Power supply: 380 V Equipment: Manual longitudinal and cross-cutting line for sheet metal strips with rubber transport rollers. Knife shaft Ø 70 mm 3 pairs of knives Length measuring device with measuring scale Automatic and manual operation Brake motor Manual rotary shear for cross-cutting The RULI 120 / SBVA is a longitudinal and cross-cutting line designed for processing sheet metal strips. The machine enables longitudinal slitting and cutting to length and is particularly suitable for processing thin sheet metal. The sheet material is fed to the knife shaft vi ...

6 x temperature control units (Wittmann, GWK and Motan)

Bitzer LHV7E/4CE-9F3Y-40S Condensing Unit Bitzer Ecostar condensing unit, with integrated frequency inverter, duel speed controlled EC fans, cooling capacity approx 32Kw, 3Ph

Year of construction unknown suitable for Heidelberg SM 102 Printing unit protection operating side SM 102 curved design Drupa 2008 Delivery date: immediately from stock

Used SIDEL monocolumn Palletizer 200 Unit per hour -Year 2013Technical Specifications & Performance DataThe Sidel Monocolumn palletizer is an automatic palletizing solution designed for the efficient end-of-line handling of PET bottles in industrial packaging and beverage production environments. Built in 2013, this machine is configured to process a current bottle format of 2.0L and can reach a maximum performance of 200 layers per hour.Manufacturer: SidelModel: MonocolumnManufacturing year: 2013Container material: PETCurrent format: 2.0L bottlesMaximum capacity: 200 layers per hourSupported pallet: Eur-EPAL 800x1200 mmInstalled power: 73 kWWorking plane height: 800 mmAdvanced Automation & Control SystemsThe palletizer is controlled by a Siemens PLC, providing dependable automated coordination of palletizing movements and end-of-line material handling. The electrical system is configure ...

Temperature controller, temperature control unit, temperature regulator, modular temperature control unit -Manufacturer: GWK, temperature control unit teco wi -Type: teco 1000 -Heating output: 18 kW -Nominal cooling capacity: 100 kW -Technical data: see photo of the type plate -Dimensions: 1190/320/H745 mm -Weight: 102 kg

For sale is a powerful CompAir Broomwade screw compressor unit (electric motor incl. compressor stage / screw block). Ideal as a spare part, replacement unit for existing industrial plants or for export/repairers. Technical data (according to nameplate): Power: 90 kW Speed: 1,465 rpm (50 Hz) Voltage / Current: 380/415 V | 191/178 A (star/delta circuit) Year of Make: 1996 Degree of protection / frame: IP 23 | Frame C250MC As shown in the pictures, stored on pallet. Incl. suction tube / flexible hoses and device for fastening.

Consisting of: 1x Sartorius” Pro Mixer Drive Unit serial no: BDR0722003932 equipped with touchscreen dimension 1250x420x1000 mm, 1x Sartorius” Palletank equipped with Minebea intec” weight indicator capacity 50 liter dimension 800x820x1100mm. Auction-ID: A1-48959-70

Consisting of: 1x Sartorius” Pro Mixer Drive Unit serial no: BDR0721007081 equipped with touchscreen dimension 1250x420x1000 mm, 1x Sartorius” Palletank equipped with Minebea intec” weight indicator capacity 100 liter dimension 800x820x1100mm. Auction-ID: A1-48959-68

Consisting of: 1x Sartorius” Pro Mixer Drive Unit serial no: BDR0722003942 equipped with touchscreen dimensions 1250x420x1000 mm, 1x Sartorius” Palletank equipped with Minebea intec” weight indicator capacity 100 liter dimensions 800x820x1100mm. Auction-ID: A1-48959-66

Consisting of: 1x Sartorius” Pro Mixer Drive Unit serial no: BDR0722003947 equipped with touchscreen dimension 1250x420x1000 mm, 1x Sartorius” Palletank equipped with Minebea intec” weight indicator capacity 100 liter dimension 800x820x1100mm. Auction-ID: A1-48959-67

Consisting of: 1x Sartorius” Pro Mixer Drive Unit serial no: BDR0720005861 equipped with touchscreen dimension 1250x420x1000 mm, 1x Sartorius” Palletank equipped with Minebea intec” weight indicator capacity 50 liter dimension 800x820x1100mm. Auction-ID: A1-48959-69

VersaPUR bag melter 6080646 year 21 overhauled and cleaned PUR processing from environmentally friendly 20-litre bags with film coating. Melt-on-demand function to reduce thermal stress and protect bonding properties. Pneumatic piston to squeeze the adhesive out of the container, almost eliminating residues. Retention of sufficient adhesive in the hopper to continue operation during bag changes.

VersaPUR bag melter 7092486 year 18 overhauled and cleaned PUR processing from environmentally friendly 20-litre bags with film coating. Melt-on-demand function to reduce thermal stress and protect bonding properties. Pneumatic piston to squeeze the adhesive out of the container, almost eliminating residues. Retention of sufficient adhesive in the hopper to continue operation during bag changes.

Used 6-axis articulated robot from Stäubli, model RX60, with associated CS7B control unit. The robot is suitable for pick-and-place tasks, handling, assembly and automation tasks in industrial production environments. The control unit has connections for RS232, DeviceNet, V-REGAUTO and Ethernet. The system is used and shows normal signs of use due to use. Connection cables and connecting cables are available. Scope of delivery: 1 Stäubli RX60 articulated robot 1 control unit CS7B Connection cable between robot and controller Type: RX60 Control: CS7B Year of construction: 2001 Machine number: F01/5K85B1/C/01 Connection: 3x400V / 50/60Hz / 3700VA Mass (robot + controller): 230 kg Interfaces: RS232 (1), RS232 (2), DeviceNet, Ethernet, V-REGAUTO ― Length: approx. 125 cm Width: approx. 80 cm Height: approx. 110 cm Weight: 230 kg Auction-ID: A7-49816-184

Afag Control Unit IRG 1-S Manufacturer: Afag Type: IRG 1-S Technical Data: Degree of protection: IP54 Input voltage: 230 V Output voltage: 20–228 V (adjustable) Frequency: 50/60 Hz Rated current: 6 A Degree of protection: IP54 Function: Power and frequency controller for Afag vibratory conveyors > linear oscillator or spiral conveyor Auction-ID: A7-49816-16

The Kistler maXYmos NC is an NC-controlled joining and monitoring system for quality assurance in assembly and joining processes. The system consists of a maXYmos monitor (type 5847/5877AZ000) for process monitoring and an electrical NC joining unit (NCFT, model T-13646) with integrated force transducer and displacement measurement. It is suitable for monitoring and controlling pressing, joining and press-fitting processes in manufacturing and assembly technology. The device is used, removed from an industrial plant and shows normal signs of wear. A functional test was not carried out. Sold as a used industrial component. Scope of delivery: 1 maXYmos NC monitor (type 5847 / SN 457173BA) 1 NC joining unit NCFT (model T-13646, weight 5.8 kg) 1 orange motor cable (coiled, approx. 10–15 m) 1 gray encoder/signal cable (coiled) 1 green encoder cable (coiled) 1 white cable (coiled) 1 red c ...

Stereo microscope from Leica in a compact design with binocular view and external LED control unit. The device is suitable for observation and control tasks in the laboratory, in fine assembly and during inspection work. The version with power supply and separate control unit allows operation as an optical work device on an existing workstation system. The device is used and shows normal signs of age and use on the housing. Power supply, connection cable and control unit are available. Scope of delivery: 1 stereo microscope 1 LED control unit 1 power supply Connection cable according to existing design Type: MZ75 Device type: Stereo microscope Version: binocular Lighting: LED control unit Power supply: external power supply Auction-ID: A7-49816-207

Used hydraulic power unit from HYMA with vertical engine design on integrated oil tank. The unit generates hydraulic pressure in the range of 100 to 250 bar and delivers a volume flow of 24 l/min. The drive is provided by a three-phase asynchronous motor with an output of 11 kW. It is suitable for use as a hydraulic supply unit in the machine tool industry, in press construction and in hydraulic production technology systems. The unit is used and shows normal signs of use due to use. It is completely available and assembled in a compact unit. Scope of delivery: 1 hydraulic power unit complete Three-phase motor mounted Pressure gauge Bosch pressure valve block Oil tank integrated connection lines available Type motor: FC1 32M/4 Year of construction: 2002 Engine power: 11 kW Speed: 1440–1745 1/min (depending on circuit) Connection: 380/660 V or 420/720 V, 3~, 50–60 Hz Protecti ...

Regloplas water temperature control unit for industrial use in plastics processing, especially for temperature control of injection moulds and other process tools. The device works with water as a heat transfer medium and achieves a maximum flow temperature of 90 °C with a heating capacity of 9.5 kW. It is suitable for applications in injection moulding, extrusion and related manufacturing processes where precise temperature control is required. The device is used and shows normal signs of use due to use. It was in industrial use until recently. Scope of delivery: 1 Regloplas 150 KL temperature control unit Without additional accessories Type: 150KL/9/TP20/1K/RT45 Serial number: 143709 Control: Regloplas RT 45 Max. temperature (Tmax): 90 °C Heating capacity: 9.5 kW Tank volume: 11 dm³ Connection: 400 V / 3 PE / 50 Hz Power consumption: 15 A Circuit diagram No.: 32035 ―  ...

Afag Control Unit IRG 1-S Manufacturer: Afag Type: IRG 1-S Technical Data: Degree of protection: IP54 Input voltage: 230 V Output voltage: 20–228 V (adjustable) Frequency: 50/60 Hz Rated current: 6 A Degree of protection: IP54 Function: Power and frequency controller for Afag vibratory conveyors (linear oscillator or spiral conveyor) Auction-ID: A7-49816-17

WEISS rotary switching unit / rotary indexing table with control from an automated assembly system. Condition: used Technical data: Manufacturer: WEISS GmbH Type: TC0320T Serial number: TC514801 Station: 04 Year of construction: 2019 Weight: 112 kg Drive / control: Siemens SIMOTION D Siemens SINAMICS PM240-2 Dimensions approx.: 45 × 82 × 40 cm Auction-ID: A7-49816-61

SCHUNK Swivel Unit SRU+30-W-180-3-4-M8 with 2× Gripper JGP 64-1 (used) Manufacturer: SCHUNK Model Swivel Unit: SRU+ 30-W-180-3-4-M8 Model Gripper: JGP 64-1 (2 pieces, parallel gripping) Condition: used, fully functional at the time of dismantling Assembly: completely pre-assembled unit (swivel unit + two grippers) Technical data: Swivel unit SRU+30-W-180-3-4-M8 Swivel angle: 180° Size: 30 Design: W variant (reinforced bearing) Damping: Level 3–4 Connection thread: M8 Compact, lightweight design Pneumatically operated gripper JGP 64-1 Type: JGP Parallel gripper Size: 64 Gripper stroke: typically approx. 6–8 mm (depending on model) Clamping force: approx. 700–900 N 2-jaw gripper Robust, industrial-grade housing Pneumatic drive Mounted on both sides of the SRU rotary unit Auction-ID: A7-49816-35

Regloplas water temperature control unit for industrial use in plastics processing, especially for temperature control of injection moulds and other process tools. The device works with water as a heat transfer medium and achieves a maximum flow temperature of 90 °C with a heating capacity of 9.5 kW. It is suitable for applications in injection moulding, extrusion and related manufacturing processes where precise temperature control is required. The device is used and shows normal signs of use due to use. It was in industrial use until recently. Scope of delivery: 1 Regloplas 150 KL temperature control unit Without additional accessories Type: 150KL/9/TP20/1K/RT45 Serial number: 143709 Control: Regloplas RT 45 Max. temperature (Tmax): 90 °C Heating capacity: 9.5 kW Tank volume: 11 dm³ Connection: 400 V / 3 PE / 50 Hz Current consumption: 15 A Circuit diagram No.: 32035 � ...

The Kistler maXYmos NC is an NC-controlled joining and monitoring system for quality assurance in assembly and joining processes. The system consists of a maXYmos monitor (type 5847/5877AZ000) for process monitoring and an electrical NC joining unit (NCFT, model T-13646) with an integrated force transducer and displacement measurement. It is suitable for monitoring and controlling pressing, joining and press-fitting processes in manufacturing and assembly technology. The system is used and shows normal signs of use due to use. All main components are present and complete. Scope of delivery: 1 maXYmos NC monitor (type 5847) 1 NCFT NCFT joining unit (model T-13646, weight 5.8 kg) 1 orange motor cable (coiled, approx. 10–15 m) 1 grey encoder/signal cable (coiled) 1 green encoder cable (coiled) 1 white cable (coiled) 1 red cable (coiled) Other connection cables and wires Type monitor:  ...

Assembly / press station with TOX power pack, feeding unit and sensors Pneumatic-hydraulic assembly or press station from an industrial plant, consisting of frame, press drive, feed and control/sensor components. Last use for semi-hollow rivets Ø 4.0 mm, length 5.0 mm (stainless steel 1.4016). Conversion to other rivet types/sizes depending on the tool set. Condition Used, from production dismantling Mechanically complete Optical with usual signs of use Untested, no function or process test carried out Sale as shown Scope of delivery Complete pressing/assembly station TOX powerhouse Feeding unit incl. funnel and valves Sensors, pneumatics, electrical components Technical data:Main components Machine frame / system Manufacturer: VTS – Connection Technical Service Type: 300-4/180.6 Serial No.: 300.329.00 Stable steel frame, floor-standing, ready for assembly Press drive Manufactu ...

SCHUNK Swivel Unit SRU+30-W-180-3-4-M8 with 2× Gripper JGP 64-1 (used) Manufacturer: SCHUNK Model Swivel Unit: SRU+ 30-W-180-3-4-M8 Model Gripper: JGP 64-1 (2 pieces, parallel gripping) Condition: used, fully functional at the time of dismantling Assembly: completely pre-assembled unit (swivel unit + two grippers) Technical data: Swivel unit SRU+30-W-180-3-4-M8 Swivel angle: 180° Size: 30 Design: W variant (reinforced bearing) Damping: Level 3–4 Connection thread: M8 Compact, lightweight design Pneumatically operated gripper JGP 64-1 Type: JGP Parallel gripper Size: 64 Gripper stroke: typically approx. 6–8 mm (depending on model) Clamping force: approx. 700–900 N 2-jaw gripper Robust, industrial-grade housing Pneumatic drive Mounted on both sides of the SRU rotary unit Auction-ID: A7-49816-34

WEISS rotary switching unit / rotary indexing table with control from an automated assembly system. Condition: used Technical data: Manufacturer: WEISS GmbH Type: TC0320T Serial number: TC514801 Station: 04 Year of construction: 2019 Weight: 112 kg Drive / control: Siemens SIMOTION D Siemens SINAMICS PM240-2 Dimensions approx.: 45 × 82 × 40 cm Auction-ID: A7-49816-60

Afag Control Unit IRG 1-S Manufacturer: Afag Type: IRG 1-S Technical Data: Degree of protection: IP54 Input voltage: 230 V Output voltage: 20–228 V (adjustable) Frequency: 50/60 Hz Rated current: 6 A Degree of protection: IP54 Function: Power and frequency controller for Afag vibratory conveyors (linear oscillator or spiral conveyor) Auction-ID: A7-49816-15

Manufacturer: Rittal Series: TopTherm Type: SK 3387.540 Designation: Enclosure Cooling UnitYear of construction: 25.09.2019 Origin: Made in Italy Technical data: Nominal voltage: 400 V / 50 Hz / 3~ Nominal current: 3.9 A Starting current: 17.0 A Fuse: 6.3 – 10 A Refrigerant: R134a Filling quantity: 1,800 g Total cooling capacity (DIN EN 14511): L35 L35: approx. 3.8 kW Sensitive cooling capacity: approx. 3.47 kW EER: 2.38 Operating temperature: +10 °C to +55 °C Degree of protection: Internal circuit: IP54 External circuit: IP34 Weight: 77 kg Auction-ID: A7-49816-82

Assembly / press station with TOX power pack, feeding unit and sensors Pneumatic-hydraulic assembly or press station from an industrial plant, consisting of frame, press drive, feed and control/sensor components. Last use for semi-hollow rivets Ø 4.0 mm, length 5.0 mm (stainless steel 1.4016). Conversion to other rivet types/sizes depending on the tool set. Condition Used, from production dismantling Mechanically complete Optical with usual signs of use Untested, no function or process test carried out Sale as shown Scope of delivery Complete pressing/assembly station TOX powerhouse Feeding unit incl. funnel and valves Sensors, pneumatics, electrical components Technical data:Main components Machine frame / system Manufacturer: VTS – Connection Technical Service Type: 300-4/180.6 Serial No.: 300.329.00 Year of construction: 2000 Stable steel frame, floor-standing, ready for ass ...

S03-C Mason, 7,5KW, 380V, Pump : Rexroth 1PV2V3-30/40 RA01MC 63A1 , 1/80. Hydr. Block for 4 valves, 2 4/3 directional valves, elek. , tank approx. 170lt., dimensions; 95 x 60 x 80cm Possibly also with bending tool, bending cylinder! See photos. Other units on request! See photos!

Hydraulic Power Unit Type: Hydraulic power unit Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-49922-73

S03- A ( 2pcs. ) BOSCH 3 pumps, 2xkonst. No. 1517222370 / 0510715004, 1 xadjustable. 2517300000 Vn=17cm3/U, 70bar; little used 4/a directional control valve R250 768, pressure regulator, 2 pressure gauges up to 100bar or up to 400bar, oil cooler, hydraulic accumulator, engine 5.5 kw, 1400rpm, oil level indicator. Tank approx. 60lt. Dimensions: Length : 100cm; Width : 55cm ; Height : 80cm; Weight: Price per piece Others on request !

S03- A ( 2pcs. ) BOSCH 3 pumps, 2xkonst. No. 1517222370 / 0510715004, 1 xadjustable. 2517300000 Vn=17cm3/U, 70bar; little used 4/a directional control valve R250 768, pressure regulator, 2 pressure gauges up to 100bar or up to 400bar, oil cooler, hydraulic accumulator, engine 5.5 kw, 1400rpm, oil level indicator. Tank approx. 60lt. Dimensions: Length : 100cm; Width : 55cm ; Height : 80cm; Weight: Price per piece Others on request !

Tank 120lt., P max 250bar, 15lt/min, 7,5kw, pressure gauge up to 400bar, PD 315bar, Pmax 350bar, with hydraulic accumulator Hydrac P-300bar-10lt., throttle check valve; engine BBC 7,5kw, 380V, electric control, oil level indicator,

Hydraulic Station Type: Hydraulic station / hydraulic power unit Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-49922-46

Fully Automatic Shrink Film Packaging Machine with Shrink Tunnel

Temperature Control Unit, Empty weight 458 kg, 6,9A; sizes 2000x500x1200mm height.