We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,876 used machines on RESALE, but how to find them? Machine Search
used
Rational combi steamer with hood on s/s frame, type: SCC 101, 400 V, 3Ph, 50/60 Hz, 19 kW, 150-600 kPa, 10 floors, dimensions each floor: 510 mm x 320 mm, total dimensions: 900 mm x 1100 mm x 2210 mm.
used
Leventi combi steamer, type: CM MM Q2.4 B+DI, serial number: 11020052D, 380-415 V, 3 Ph, 50/60 Hz, 15 floors, floor dimensions: (15x) 400 mm x 600 mm, total dimensions: 980 mm x 850 mm x 1900 mm. Including s/s trolley with plate rack, dimensions: 560 mm x 1000 mm x 1700 mm and 2 oven racks, dimensions: (2x) 640 mm x 700 mm x 1700 mm.
used
Description: . Approx. Onsite Dimension. (l x w x h): 290 x 460 x 420 mm, weight approx.: 15 kg
used
Garant Hans Wulff steam boiler, number: 1941, year of construction: 1970, 16 bar, 12 t/h, dimensions: 8500 mm x 3900 mm x 3900 mm.
used
Varioklav steam sterilizer, model: VARIOKLAV Classic 500 EP-Z, serial number: 16052916, year of construction: 2016, 3 x 400 V, 50 Hz, 6.2 kW, volume: 142 liter, design temperature: -10 / 150ËšC, design pressure: -1 / + 2.5 bar, dimensions: 700 mm x 750 mm x 1150 mm.
used
Description: Unused Rated power: 5 5 kVA Rated current: 25 A No-load voltage: 243 V Output voltage: 20-40 A Rated output voltage: 96 V Maximum cutting thickness: 20 mm Cyclic duration factor: 40% Efficiency: 70% Insulation rating: F Protection rating: IP21 Arc start: Contact Approx. Onsite Dimension. (l x w x h): 400 x 500 x 600 mm, weight approx.: 12 kg
used
Convotherm combi steamer, type: OES 10.10, number: FS301003000A00, 400 V, 3 Ph, 50/60 Hz, 26.3 A, 19.8 kW, 11 floors, dimensions floor: (11x) 530 mm x 320 mm, total dimensions: 900 mm x 930 mm x 1800 mm.
used
Rational combi steamer, model: SCC 101, 220 V, 3 Ph, 50/60 Hz, 17.5 kW, 10 floors, floor dimensions: 540 mm x 300 mm, total dimensions: 900 mm x 750 mm x 1880 mm.
used
Venix combi steamer, model: M10S, serial number: 0B5003167, 10 floors, dimensions each floor: 380 mm x 610 mm, total dimensions: 1200 mm x 800 mm x 1350 mm.
used
Mitali combi steamer, model: FORNO A CONVENZIONE, type: 10T 60x40, serial number: 19041664, year of construction: 2019, 400 V, 50 Hz, 16.1 kW, 145 Kg, 10 floors, dimensions each floor: 380 mm x 610 mm, total dimensions: 1200 mm x 800 mm x 1350 mm.
used
Flow steam generator with 23,1 kw/h Capacity: 35 kg/h steam Strom / Volt: 400 capacity / hour ca.: 35 customs no.: 84022000 More then 300 machines new and second hand on our seema .de
used
Durchlaufdämpfer mit 13,2 kw Leistung: 20 kg/h Dampf Strom / Volt: 400 max Bar: 2,5 Leistung pro Stunde: 20 More then 300 machines new and second hand on our seema .de
used
Flow steam generator 16,5 kw; capacity: 25 kg/h steam Number available (price per tank): 2 Strom / Volt: 400 capacity / hour ca.: 25 customs no.: 84022000 More then 300 machines new and second hand on our seema .de
used
entry dimensions: 1000 mm wide / 4000 mm high length of chamber: 3500 mm 4 turbines, 5,5 kW each material speed: 63 m/sec 150 kg/min abrasive material per turbine max workpiece weight: 500 kg electric power: 45 kW Kind off: shot blasting unit Turbines: 4 turbines - 5,5 kW each
used
Transmission wheel made of steam engine Diameter wheel 2m Diameter shaft 170mm Suitable for generators, turbines and steam engines. Price 2,500.00€ plus VAT, ex warehouse
used
Turbine Turbine mileage: 30,000 hours Counter-pressure turbine Manufacturer KKK Initial commissioning in 2002 Type: CFR5 G6a Power Max: 2500 kW Operating power: 2200 kW, Speed 23000 rpm, Fresh steam pressure: 65 bar, Fresh steam pressure temperature: 480 C, Evaporation pressure: 1-17 bar, Investments in 2002, Total steam forming station renewed from 63 bar to 2.5 bar in 2002, El. Generator Leroy Somer, el. Power 2 MW, 525 V, 2488 kVA renewed, Complete measuring, control, control technology of the turbine renewed, steam turbine renewed With Energy Installed boiler power Boiler I Coal Steam generation: 20 t/h, 63 bar, 495 C Boiler II Coal Steam generation: 13 t/h, 34 bar, 425 C Boiler III: Combined burner for oil and gas, steam generation: 20 t/h, 17 bar, 285 C General overhaul of the entire plant from 2002 to 2004, steam generator renewed, automatic charcoal and ...
1999, HOR. FRUIT PRESS, BUCHER, MPX-100, REFRIGERATION UNIT, BITZER, R-134A, CENTRIFUGE, VACUUM FILTER, STEAM BOILER, EVAPORATOR ETC.
used
We have tons of processing equipment for sale, half of it has never been used. Products from suppliers like: Alfa Laval - Heat exchangers, pumps, valves etc, large stock. Tuchenhagen - Valves and pumps APV - Valves and pumps Samson - Steam valves (more than 20, never used) Spirax sarco - Steam traps, steam separators, never used Siemens (Danfoss) - Flow meters MAG5000 and MAG6000, mass flow meters MASS 3100, unsed and unused Danfoss - Frequency converters, VLT5000 and VLT6000 series, still in boxes, only a few left Mobrey, Emerson Process - Level sensors, SK267 flanges 50 pieces, density meters unused Fisher rosemont - Mass flow meters DN50, 3 pieces, unused Procesdata - PD340 flow meters, more than 30 pieces, also mod. C, extended version (DN25-DN80) Not on the list? We probably have it, why not try us? Best regards, Editec AB
SLEEVER , STEAM TUNNEL & TRANSPORTATION UNIT, 2006
used
Cat.-Nr. 09-2900-2 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...
used
Cat.-Nr. 09-2900-1 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...
used
Back-pressure turbine Manufacturer: Fa. KKK First Start-up: 2002 Operating Hours of Turbine: 30,000h Type: CFR5 G6a Power Max: 2500 kW Operational efficiency: 2200 kW Revolution number: 23000 rpm Live steam pressure: 65 bar Live steam pressure temperature: 480 oC Evaporation pressure: 1-17 bar Investments in the year 2002 Entire steam transforming station from 63 bar to 2.5 bar renewed in 2002, El. Generator Leroy Somer, el. Power 2 MW Renewed measuring Entire -, governing and control of the turbine renewed Steam turbine renewed Installed boiler efficiency: Boiler I Hard coal Steam generation: 20 t/h, 63 bar, 495 oC Boiler II Hard coal Steam generation: 13 t/h, 34 bar, 425 oC Boiler III: Combination burner for oil and gas Steam generation: 20 t/h, 17 bar, 285 oC General overhaul of the entire plant from 2002 to 2004 Steam generator renewed automatic cole-loader ...
used
2st. DAUB oven THERMO-ROLLING type RDTO 08.12,5.10 SX02 ofen for 20 tins usable total area 10.00 m and 178 baking surface floor 1.00 m and 178 baking square measure floor 78 x 58 cm 2 ofen Totally total area 20.00 m and 178 - 40tins stove is in very good state general and thorough outdated. functions as anew. a very good steam. secondary circulation for the baking chamber. turbo-equipment. everything maagnetic pumps incl. Daub Thermooel-boiler arrangement with magnetic pumps including. 8 stuck anew stikkenwagen including. 80 stuck rand two rand alubleche sales incl. cargo and assembly on inquiry I also have to sell 2st. DAUB oven THERMO-ROLLING type RDTO 08.12,5.7 usable total area 7.00 m and 178 (7 auflage, high shelves) price on inquiry
used
Daub baking master 22.5 m and 178 stove is a state in TOP general and thorough outdated. functions as anew. anew steam apparatus. anew elektrik anew hearthstones incl. Daub Thermooel-boiler arrangement sales incl. cargo and assembly on inquiry I also have to sell other uberholt DAUB oven THERMO-OEL price on inquiry contact: + 48 692 345 660 anbox.pl
used
6pcs. DAUB oven THERMO-ROLL type RDTO 08.12,5.10 SX02 One oven for 20 sheets Total usable area 10.00 m² Baking area per floor 1.00 m² Baking area size per floor 78 x 58 cm 6 oven Total total area 60.00 m² - 120plates Furnace is in very good condition, General and thorough overhaul. Works like new. A very good steam. Secondary circuit for the baking chamber. Turbo equipment. All maagnetic pump incl. Daub thermal oil boiler system with magnetic pump Including. 12 stuck stikkenwagen Sale incl. freight and assembly on request I also have to sell 2st. DAUB oven THERMO-ROLL type RDTO 08.12,5.7 ( 7 editions, high shelves) Price on request
used
4st. DAUB oven THERMO-ROLLING type RDTO 08.12,5.10 SX02 ofen for 20 tins usable total area 9.60 m and 178 4 ofen Totally total area 38.40 m and 178 - 80tins stove is in very good state general and thorough outdated and checked. functions as anew. very good steam. secondary circulation for the baking chamber. turbo-equipment. everything maagnetic pumps incl. Daub Thermooel-boiler arrangement including. 8 stuck anew stikkenwagen sales incl. cargo and assembly price on inquiry
used
Silo used approx. 75 m ³ / 75,000 litres polyester silo / GRP silo standing, with or without frame, good condition Dimensions: approx. Ø 3,0 m x 12 m high without frame Bulk density 1, 2 t / m ³, Speidel tank, The container can be used as storage tank for water, liquid food, whey, potato steam skins, molasses, grain, salt, rain collection tank, and so on. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site: profi-tanks(dot)de
used
Daub Backmeister 18m² Furnace is in TOP condition, General and thorough overhaul. Works like new. New steam apparatus. New electrics New cooking hobs incl. Daub thermal oil boiler system Sale incl. freight and assembly on request I also have to sell other overholt DAUB oven THERMO-OEL Price on request Contact: +48 692 345 660 anbox.pl
used
Lauber Energy Use Centre for 4 containers. The plant is abandoned due to conversion of the production. We replace our steam engine with a turbine, which is why most of the waste heat is eliminated. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. 4 containers of wood chips/firewood can be connected ( 35m3). Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) The system consists of: Intake hopper for air incl. dust filter Blower unit Heater 370kW Funnel for air flow incl. 4 shut ...
used
Stove is in excellent condition, General and thorough overhauled. Works like new. New steam apparatus. New electrics New stove incl. daub thermal oil boiler plant Sales including freight and installation upon request I also have to sell other uberholt DAUB oven THERMO oil Price on request
used
Full stainless steel heat exchanger in round shape. Previous use: heating air with steam. Suitable for heating or cooling aggressive gases/air.
used
P45 - used approx. 30 m³ / 30,000 litres polyester tank / GRP tank, above ground, flat bottom. Food tank, insulated storage tank, water tank, whey tank,.fodder tank volume: approx. 30 m³ / 30,000 litres dimensions: Ø 2.60 m x height approx. 5.75 m weight: approx. 3.0 t The container is in used condition, according to the age there are traces of use. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, canola oil, seeping Juice, farm slurry or as rainwater tank, water cistern etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us ...
used
2pcs. DAUB oven THERMO-ROLL type RDTO 08.12,5.10 SX02 or 10.12,5.10 SX02 A furnace for 20 sheets Oven is in very good condition, General and thorough overhauled. Works like new. A good steam. Secondary circuit for the baking Chamber. Turbo equipment. All maagnetic pump incl. daub thermal oil boiler system with magnetic pump including. 4 piece rack new Sales including freight and installation upon request I also have to sale 2pcs. DAUB oven THERMO-ROLL type RDTO 08.12,5.7 (7 Edition, high shelves)
Type; AUMA 15SN X 1600 Manufacturer: Berstorff, Germany Year of manufacture: 1998 Technical Specification: Working width: 1600 mm Steel belt width: 1750 mm Steel belt thickness: 1,8 mm Steel belt length: 15600 mm Rolls width: 1950 mm Center distance between frames: 2330 mm Heating roll diameter: 1500 mm Stretch rolls (I, II, III) diameter - 1000 mm Vulcanizing time: 1?30 min Working speed: 7?.210 m/h Max steam pressure in heating roll: 13 bar Max steam pressure in lower stretch roll: 8 bar Surface temperature of: Heating roll: ca. 195oC Lower stretch roll: ca. 175oC Pressure in heating zone between steel belt and rubber: 60 N/cm2 Main motor speed: 1 450 min-1 Drive position: Left from inlet Paint: RAL 6011 Air supply: 6 bar Cooling water supply: + 25oC Max hydraulic pressure Belt pressure tension: 250 bar Belt pressure regulation: ...
used
used approx. 15 m³ / 15,000 litres polyester tank / GRP tank, flat bottom tank, good condition. dimensions: Ø 2.50 m x H approx. 3.10 m Aboveground vertical tank with flat ground / base. Outlet can be attached at customer's request. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, canola oil, AHL/ASL or as rain drip tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site: profi-tanks(dot)de
Filter area: 6.5 m2 Material: polypropylene Total width with filtrate pipe and valves: approx. 2.3 m Total length: approx. 8.9 m Total height: approx. 1.9 m Weight: approx. 5.5 t Effective belt width: 1.0 m Effective belt length: 6.5 m Belt forward stroke: 0.5 m Filtrate zones: 13 zones a 0.5 m Zone arrangement selected (variable): zone 1-2 filtration zone 3-4 1st wash (overflow weir) zone 5-6 2nd wash (overflow weir) zone 7-9 3rd wash (nozzle system) zone 10-11 steaming zone 12 pressing & blowing zone 13 dewatering
used
The filter is designed in modular design consisting of the feeding and discharge part and also of one central part. On these modules vacuum trays are mounted, which are divided into individual filtrate zones, the length of which corresponds to the belt forward stroke. The individual modules are bolted to each other. It will be possible to change the filter area later on by addition or removal of one or several modules. Each module consists of the frame, the vacuum tray and various devices for belt transport, feeding, and discharge of the media, cake discharge and filter belt cleaning. Total width with filtrate pipe and valves: approx. 2.3 m Total length: approx. 8.9 m Total height: approx. 1.9 m Weight: approx. 5.5 t Effective belt width: 1.0 m Effective belt length: 6.5 m Belt fo ...
Qty. 1 Second-hand extrusion press line Mfc.: SCHLOEMANN Built: 1980 Force: 4000 MT The press was used in the brass and copper application. The press has been reconstructed and changed to aluminium application in 2005. Before the production has been stopped was the press in excellent condition. The plant has been stopped in 2010 due to ecenomical situation. Billet dia.: 8’’(203mm) - 12’’(304mm) Billet length: 1000 mm Main ram: 1400 mm dia Side cylinder: 300 mm dia. (piston head) Exit sıze of and plate: 500 mm Scope of supply: Feeding system Billet furnace Extrusion press Run aut table 45 mt long Cooling table (belt type ) Strecher force: 200-300 ton Die oven Finsihing table and saw Billet furnace ( 2 pieces) one natural gas type one induction type JUNKER Hot saw Operation desk PLC type (need sone ...
used
Daub baking master 27 m² Stove is in excellent condition, General and thorough overhauled. Works like new. New steam apparatus. New electrics New stove incl. daub thermal oil boiler plant Sales including freight and installation upon request I also have to sell other uberholt DAUB oven THERMO oil Price on request Contact: + 48 692 345 660 anbox.pl
used
1 x Farrel Banbury internal Mixer, Model 00C. Machine number: 91M7017, Year: 1992, Stainless steel jacketed swing side (drop door design). Maximum steam or water pressure 150psi, chrome plated two wing cored rotors with spherical roller bearings, gross capacity of mixing chamber 4.24 liters. 5" Diameter ram cylinder, maximum pressure 100psi. Chrome plated single slope V-bottom, stainless steel, pneumatically operated front door, F.Y.A. dust stops, oil seals, oil injector, thermocouple. With 65kw (87hp), 340/440 volt, 1500 rpm motor, reducer ratio 15:1. Unit mounted in an enclosed cabinet with a pull-out discharge drawer. Includes an operator panel. In good condition.
used
DAUB oven THERMO-ROLL type RDTO SX02 Oven is in very good condition, General and thorough overhauled. Works like new. A good steam. Secondary circuit for the baking Chamber. Turbo equipment. incl. daub thermal oil boiler system with magnetic pump Sales including freight and installation upon request I also have to sell other model thermooel oven Price on request, Please give as oven you need type.
used
Used stainless steel cooker made by Milfor Olsztyn. Working volume 150 L. Total chamber volume 200 L. Height 2300 mm, lenght 1520 mm, width 1130 mm, weight 1300 kg. Steam usage 120 kg/h. Max ressure in chamber 0,16 MPa. Agitator speed 50 rpm. Agitator's motor 1,1 KW. Unit has bottom driven cutting knifes. Heating jacket on the chamber. Batch is heated also by direct steam nozzles. Cover has opening and closing mechanism
used
Oel-Diffusion pump Manufacturer: Leybold Type: DIP 50,000 Status: used Technical data Product: DIP 50000 Catalogue: 22240 Connection flange Suction side: DN 1000 ISO-F Connection flange Print side: DN 160 ISO-K Suction Below 1.0 x 10-4 mbar / 7.5 x 10-5 Torr: 50000 l/s working range: 1.0 x 10-2 - 5.0 x 10-7 mbar 7.5 x 10-3 - 3.8 x 10-7 Torr Final pressure: < 5.0 x 10-7 mbar < 3.8 x 10-7 Torr Max. pre-vacuum pressure: 6.0 x 10-2 mbar 4.5 x 10-2 Torr Equipment: Pump is delivered without equipment quantity of equipment min.: 12.0 l 12.7 qt max.: 25.0 l 26.4 qt grid connection: 3-ph Y, 400 V, 50/60 Hz Heating capacity: 24 kW Number of heating cartridges: 24 Heating time: < 30 min Number of cooling water circuits: 3 Cooling water minimum pump: 1500 l/h 6.6 gal/min Duesenhut steam barrier: 150 l/h 0.66 gal/min Max. Cooling water pressure: 6 bar 87 psi Cooling water connection pump: 1/ ...
used
1 x Farrel Banbury internal Mixer, Model 00C. Machine number: 91M7017, Year: 1992, Stainless steel jacketed swing side (drop door design). Maximum steam or water pressure 150psi, chrome plated two wing cored rotors with spherical roller bearings, gross capacity of mixing chamber 4.24 liters. 5" Diameter ram cylinder, maximum pressure 100psi. Chrome plated single slope V-bottom, stainless steel, pneumatically operated front door, F.Y.A. dust stops, oil seals, thermocouple. With 65kw (87hp), 340/440 volt, 1500 rpm motor, reducer ratio 15:1. Unit mounted in an enclosed cabinet with a pull-out discharge drawer. In very good condition. Machine to be supplied checked over (overhauled) and fitted with new electrical controls including Siemens S7-1200 PLC and touch screen PC for auto/manual mixing and recipe/data saving.
1 x BUZULUK 1920mm wide Four-roll 'L' calender - Type: 03506 - Rolls dia 710x1920 mm - Year of manufacture: 1989 - Peripherally drilled rolls - High pressure hot water heating (Steam 1.6 and 3.2 MPa) - Motorised nip adjustment to rolls 1, 2 and 4 (30mm adjustment) - Cross axis on roll 3 (0-30mm) - Roller Bearings - Unidrive gearbox with DC motor to each roll - Rolls 1 and 4: 46 kW - Rolls 2 and 3: 77 kW - Working speed of 4th roll max 60m/min In very good condition.
used
Motor tube Notchers from ALMI AL1â2U Notching of gas -, steam -, stainless steel, non-ferrous, as well as numerous other pipes with heavy use, ALMI has developed a series of particularly efficient pipe Notchers with electric drive. Wherever ensure the Notcher ALMI extremely quickly and accurately for the correct tube recess where welded tubes at a 90 ° angle. They are suitable also for the production of double corner joints. The pipe Notchers with a 2.2 KW motor is equipped for intensive use. The engine forms a whole with special eccentric shaft, which drives the notching tool. The model AL1-2U also has a Notcher for zinc spout. The tube Notcher has a 0 voltage fuse, and a protection device. Properties High productivity Low investment costs Several diameter available immediately Ideal for double corner joints up to 5 mm wall thickness (for VA up to 4 ...
used
Various spare parts for SOMOS dryers e.g.: gear wheels, electrical parts, desiccant Chambers, filter elements, blowers, heating elements, motros, sight glasses, turbines, magnetic valves or cylinders can be offered on demand.
used
Ness Smokehouse - two trolley - steam heated - complete with smokegenerator
used
used approx. 15 m ³ / 15,000 liter tank of polyester / GRP tank above ground, lying, good condition Dimensions: Ø 2.40 m x approx. 3.80 m long lying tank dome on the top of the tank, multiple connections,-, spouts, etc. The container can be a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, rain collection tank, AHL / ASL, etc are used. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site: profi-tanks(dot)de
used
P92 - used approx. 7 m³ / 7,000 litres polyester tank, GRP tank, Juno tank, standing on 4 cones, in good condition. technical details: capacity: approx. 7 m³ / 7,000 L material: polyester tank / GRP tank manufacturer: Juno dimensions: w 1.50 m x l 2.00 m / h total 3.50 m including feet Manufacturer Juno, aboveground storage tank, including four steel bases / cones, lid on the front side, several in - and outlets. The container can be used as a storage tank for many different media such as water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL, ASL, seeping juice, rapeseed oil, or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it m ...