steam turbines used for sale

Biomass CHP Boiler Plant – 5.4 MW Thermal and 995 kWe Turbine Capacity A lightly operated, complete biomass CHP boiler plant featuring a 9.5 MW bubbling fluidized bed boiler (BFB), designed for wood-based fuels. The plant includes a back-pressure steam turbine and a heat exchanger for hot water production from back-pressure steam. The plant was built by Estonian Filter Solutions, a company highly experienced in steam boiler plant engineering and EPC contracting. The BFB steam boiler was delivered by Vapor Boilers Finland. The steam turbine was manufactured by Triveni Turbines (India), in combination with a generator and controls from ABB. Other key equipment includes KSB pumps, conveyors from Technobalt AS, and rotary airlock valves from Rotolok UK. The power plant was commissioned in 2013 and operated at partial load until 2015. The control system, developed by Filter Solutio ...

Key Details: • Turbine: Solar Centaur 40 (Dual Fuel: Natural Gas & Diesel) • Power Rating: 3.5 MW • Total Running Hours: 40,000 since the last overhaul • Alternator: Hyundai, Air-Cooled, 3,500 kW, 50 Hz, 3,300V • Heat Recovery Boiler: Nebraska, 22-ton capacity • Gas Compressor & Control Panel included Spare parts available. Find more here - / Contact us at -

2x Tapping back-pressure turbine with spur gearbox and generator Nr1: Turbine Make: ELIN Type: KR 25 Rated power in relation to the generator terminals: 3800 kW Speed: l0000 rpm Steam inlet pressure max. : 37 Steam inlet temperature max. 44 degrees Tapping pressure max. : 24 Tapping temperature : 390 degrees Evaporation pressure : 2 Normal absorption capacity : 27 t/h Maximum absorption capacity : 32 t/h Gearbox Make Voith, St.Pölten Type D 64 Rated power: 5,700 HP Speed 10 OOO/1 5oo rpm Backpressure steam turbine + gearbox + synchronous generator incl. auxiliaries Nr2: Turbine Make: ELIN Type: KR 25 Rated power in relation to the generator terminals: 43oo kW Speed: 9900 rpm Steam inlet pressure max. 24 atü Steam inlet temperature max. 42o 00 Exhaust steam pressure 2 ata Normal absorption capacity 35 t/h Maximum absorption capacity 35.7 t/h Gearbox Make BHS  ...

Steam Boiler Plant 120 MW / 30 bar Saturated Steam This steam boiler plant is in good condition and designed to produce 54 kg/sec of saturated steam at 30 bar for industrial processes. The boiler features a membrane wall construction and is supported from the bottom. It is equipped with four burners located at the top of the boiler: two fired by natural gas and two by light fuel oil, each with a capacity of 30 MW. The firebox base and lower manifold are protected by refractory tiles. The flue gas side of the boiler operates under positive pressure. The plant includes two 100% capacity combustion air fans; there is no exhaust gas fan. The equipment has been meticulously maintained and upgraded throughout its operational life, meeting the most stringent modern quality standards. The steam boiler operates on natural water circulation, with heating surfaces arranged across two draughts ...

SUMAB is currently offering a horizontal steam generator. Technical details: Capacity 1500 kg/h, allows you to produce steam in a short period of time. Pre-installed accessories are ready to run. A two part platform for easy assembly on site. Includes: water softening device, condensate tank, cavitation preventing pump, by-pass group with float trap, all fittings and piping connections.

Steam turbine for sale. The turbine was built in 2012, is in good condition and is no longer in operation. Model SST-060 Turbine with impeller in so-called constant-pressure design ("action wheel"). The turbine rotor is mounted on two bearings and consists of the above-mentioned impeller and a shaft, which are connected to each other by means of Hirth gearing. The impeller is located outside the bearing and consists of one piece. The blades are milled out of the solid disc. Live steam pressure: 13.0 ´bara at turbine flange Live steam temperature: 191.6 ´C at turbine flange Live steam flow max: 10,000 kg/h Exhaust steam pressure: 5.2 bara at turbine exhaust flange Turbo generator sound pressure level: 92 dB(A) z 3 dB(A) measured at a distance of 1 m Coupling power: 275kW Total terminal power: The tolerance is 1.0%. 265kWe The pressure drop for the cyclone to be provided sh ...

Maurer cooking chamber. Twin trolley., 6 trolleys available

Lot 592 500L steam jacketed hemispherical scrape surface vessel, bottom central discharge, half moon lid, agitator (six sets of removable propellers along shaft)

Qty. 1 Second-hand power plant including boiler (BFB – boiler: bubbling fluidized bed) Mfc.: Foster Wheeler, Siemens, Raumaster, YIT Corporation, Honeywell, Built: 2001, 2002, 2006, 2009 Revision: 2009 Insulation removed in 2018 BFB Boiler – 88 MW Steam turbine – 22.5 MW Main Steam Cycle BFB boiler K7 – Some parts removed and storaged indoor at the paper mill area – Boiler is made electrically safe (cables cut) – Dry conservation ongoing since 2014 (tubes filled with nitrogen, dry air circulation) – Steam Turbine VP4 (in storage) Generator (in storage) Power Plant – Function Primary function is to produce steam for the Paper Mill reliable and economically Secondary functions: Burning of the Paper Mills (PM) waste wood Incineration of sludge from the PM: WWTP Production of flue gas to the PCC (precipitated calcium carbonate) plant Electricity product ...

1. LBBC Autoclave (AC3) Working diam. 600mm (2ft) Working: 1500mm (5ft) Max. working pressure 100 PSI 2. LBBC Autoclave (AC3) Working diam. 750mm (2ft.6”) Working: 1200mm (4ft) Max. working pressure 80 PSI

Giusti, cooking vessel, steam jacketed vessel, 225L, central bottom discharge, stainless lid

Scholz Steam Autoclave Year 1979 7 bar pressure Internal dims: 1.5m diam. x 2.6mm long Temperature 150deg C 10 x steam connectors Indirect steam Full rail system Machine overhauled 2016/17 Full safety certification available Complete with control panel

Safety valve Handtmann DN 32 Steam/ Gas Input DN 25 Output DN 32 Length 270 Material stainless steel 1.4307 Pressure 0.2-2.5 bar

78 MW- 50 HZ

This plant is currently intact and fully connected. The footprint is rectangular and measures approximately 9x5 metres (not including the steam plant, which is in a separate building, adjacent to the brewery). All brewery pipework is stainless steel with clamp-type connectors. The Vessels are all 1,250 litres (except for the glycol tank). - Hot Liquor Tun with level sight. - Mash Tun with wedge-wire filter and powered rakes; inlets for sparge; CIP and Vorlauf. - Combined Copper / Whirlpool with 2 x outlets; exhaust condenser; CIP ball. - Glycol Tank; 2,500 Litres. - 5 x Cylindro-conical, insulated fermenters with CIP, pressure gauge, sample outlet, spunding valve, racking and base outlets. - Side and top-entry access door. - Bright Beer Tank. Spec. as fermenters, but without the conical base. - 2 x Glycol Chillers. - Two Stage Heat Exchanger (water/glycol) with clamp-typ ...

Marel/Stork/Townsend twin spiral hot air/steam oven 600 mm belt Machine in lovely condition direct from major UK factory which stopped producing for fast food chain in 2016.

Conrad Engelke 3m diam. x 2.2m long Autoclave Steam operation Design pressure 7bar Design temp 169deg C Volume 19m3 Length of rotating steel tube 1320mm With new Control Panel Complete with full documentation

LBBC Steam Autoclave Max. working pressure 100psi Max. working temperature 200degC Double ended Steam Operation Double doors at both ends Dims 40” (3ft) diam. x 92” (7ft.6”) long Safe work pressure 7.59 bar Vessel type 95/23 With boiler

Steam Turbine 1 and major components Plant part Manufacturer Year of construction techn. data turbine VEB EKM 1970 generator VEB EKM; VEB Bergmann Borsig 1970 31250 kVA x 6,3 kV condenser VEB EKM 1970 "Bearing oil plant, pumps, "VEB Apparatebau Leisnig-Tragnitz; Filter Cooler" VEM, Siemens, VEB EKM and KSB" 1969 Steam jet cleaner Wilhelm Wigand ca. 1970 Condensate pumps VEB EKM ca. 1970 Find more here - / Contact us at -

Shrink tunnel for shrinking labels onto bottles, jars, containers. Evenly shrinking of the labels without wrinkling due to the steam process. ? Specifications tunnel: max. product size: ? 100xH220mm | max. Output: 166 container/minute | compressed air: 1bar | power: 220V, 900W | machine dimensions: L2450?W500?H1600mm | weight: 120kg. ? Specifications steam generator: capacity and steam output: 27l, max. 34,4kg/h | steam temperature: 170?C | max. 24kW | compressed air: 7bar | power: 380V | dimensions: 660x420x1230mm | weight: 120kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machine ...

Height=19 m, Overall length= 90 m, Overall width= 125 m, Net weight= 50 kg, Miwe SK-II Econo Modular steam condenser Power: 0,2 kW; Mesuares: 90x125x19 cm; Avaliable: 2 tk.

General SKU332X714 LocationBarneveld MakeKörting Hannover No.210-4-32860-3 Mach.No.210-4-32860-3 Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell0.5 Bar Working pressure tubes6 Bar Main Features MaterialStainless steel Shell (Material)Stainless steel Tube (Material)Stainless steel Volume235000 Ltr. Motor5.5 KW Specified Features - Vacuum pump MaterialStainless steel 1.4571 (316Ti) Pumpcheck Number of pumps:1 Capacity235 m³/h With motor5,5kW, 400/690V, 1450 rpm, (Ex) InletDN50 OutletDN50 Information Year of construction2014 Mounted on framecheck Total height2,10 m Floorspace2,80x1,10 m Weight1100 kg ATEX compatiblecheck Extra SpecificationsWith: - seperator tank, volume 125 l. - condenser, volume 140 l., 0/+185°C Vacuum pumpsKörting Hannover AGPumps > Vacuum pumpsBrand > Körting Hannover AG What you can expect from Foet ...

REF-2721 FIREX TILTING STEAM BOILING PAN WITH MIXER 180 LITRES Brand: FIREX Range: BASKETT Model: PRIV180M Serial no.: 30 LL 18785/2007 Year: 2007 Industrial tilting boiling pan/cooking kettle with indirect heating by steam Equipped with mixer with Teflon scrapers Made of AISI 304 stainless steel Bottom of the cooking vessel made of AISI 316 stainless steel Power: 2 kW Voltage: 220-240 V 1N, 50/60 Hz Vessel dimensions (mm): 700 x 520 (Diameter x Height) Vessel capacity: 180 litres Steam consumption: up to 72 kg/h Mixer adjustable speed: 12-40 RPM Overall dimensions (mm): 1,300 x 1,450 x 1,500 (LxWxH)

General SKU332X715 MakeKörting Hannover Mach.No.210-4-32860-3 Year of construction2014 Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell0.5 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Main Features MaterialStainless steel Shell (Material)Stainless steel Tube (Material)Stainless steel Volume235000 Ltr. Motor5.5 KW Specified Features - Vacuum pump MaterialStainless steel 1.4571 (316Ti) Pumpcheck Number of pumps:1 Capacity235 m³/h With motor5,5kW, 400/690V, 1450 rpm, (Ex) InletDN50 OutletDN50 Vacuum pumps Heat exchangercheck Horizontalcheck Tube capacity60 l. Number of tubes:64 Tube diameter17 mm Tube length2200 mm Max. temperature0°C/+80°C Shell diameter300 mm Shell length2400 mm Max. temperature0°C/+185°C Shell connectionsDN40 Cover connectionsDN80 Information Mounted on framecheck LocationBarneve ...

General SKU279X362 MakeS.A. Comesse / CETAL TypeCodap 2310 cat B2 z=0.85 Steam Generator No.9467 Year of construction2013 Mounted on legscheck Pressure Working pressure21 Bar Working pressure shell21 Bar Vacuum possible shellcheck Main Features Heating (medium)Steam Capacity46.6 KW Temp.210 °C Specified Features - Temperature control unit MaterialStainless steel 1.4305 (303) Temperature control units Tube capacity25 l. Max. temperature210 °C Shell diameter140 mm Shell length1700 mm Shell connectionsDN25 Cover connectionsDN25 Temperating machinecheck steam generator Water heatercheck Electric heating46,6 kW Heating capacity25 l. Temperature210 °C With controlcheck Information LocationBarneveld Floorspace2,30 x 0,30 m Total height0,93 m Weight60 kg CEcheck Extra SpecificationsWith Cetal heating tubes, type TPE, power 46.600 kW, 400 V, and control.Tem ...

General SKU221Y082 LocationBarneveld Specified Features - Miscellaneous Capacity102 kg/h Capacity50 l. Information MakeJordan SerialT5-75.1289/B-21 Magento base g_extra_specificationsSteam Generator performance 75 kW, steam capacity 102 kg/h, operating pressure 10 bar, with a 50 l vessel, pressure 11 bar, +5/+188 °C, Information Year of construction2021 Extra SpecificationsSteam Generator Performance: 75 kW Steam capacity: 102 kg/h Operating pressure: 10 bar with a 50 l. vessel: pressure 11 bar, 5—188 °CMiscellaneousJordanMiscellaneous > MiscellaneousBrand > Jordan What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU042Y538 MakeStilmas TypePSG-500 DTS No.3797/86 Year of construction1986 Mounted on framecheck Pressure Working pressure10 Bar Working pressure jacket10 Bar Working pressure tubes6 Bar Main Features Capacity1.35 Ltr./Hr. Specified Features - Distillation Distillation installationcheck Pure Steam Generator Vessel sizesø 320 x 1800: ø 280 x 1300 mm Number of columns:2 Electric heatedcheck MaterialStainless steel 1.4401 (316) Information LocationBarneveld With switchgearcheck Floorspace1,5 x 0,7 m Total height2,7 m Weight600 kg Extra SpecificationsStilmas Pure Steam Generator type PSG-500 DTS produces saturated, dry, pyrogen-free pure steam, used as heating fluid for industrial systems. Pure steam production: adjustable (operating range stated) up to 8 bar. Steam consumption (heating steam to pure steam): 1.35 kg/kg of pure steam. DistillationDiscount ...

General SKUR0371 MakeGPI Tanks & Process Equipment LocationBarneveld CEcheck Type30 m3 vacuum steam distillation vessel Pressure Working pressure1 Bar Vacuum possiblecheck Working pressure jacket16 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume29900 Ltr. Motor7.5 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4404 (316L) Stainless Steel Reactors Reactorcheck Capacity29.900 Ltr (working volume 25.400 Ltr) Vessel sizesdia. 2500x6975mm Dished bottomcheck Dished top sidecheck Top connections(11x) Outletdia. 80mm Internal heating spiral(5x 80 Ltr) Max. temperature-20/+220 Degr. C. With paddle stirrerfabr. Jongia Motor7,5 kW, 400 Volt Ex de IIB T4Gb Atex Information No.317233-10 Year of construction2018 Floorspace2,9x2,9 M Total height8,3 M Weight6.850 KG (vessel weight without agitator) Extra Specific ...

6.6 MW MAN THYSSEN Extraction Condensing Steam Turbine Manufacturer: MAN THYSSEN Year of Construction: 1999 Condition: Used – In Good Running Condition Availability: In Stock Technical Data: Rated Power Output: 6.6 MW Voltage: 11 kV Frequency: 50 Hz Steam Inlet Conditions: Pressure: 40 bar Temperature: 440 °C Extraction Performance: 6 MW with 50 t extraction – 65 t/h 6 MW with 16 t extraction – 45 t/h 5 MW with 0 t extraction – 28 t/h Extraction Steam: Pressure: 12 bar Temperature: 294 °C Exhaust Steam: Pressure: 0.25 bar Temperature: 65 °C Description: Well-maintained German manufactured extraction condensing steam turbine suitable for industrial power generation and combined heat and power applications. The unit is designed for continuous operation and is ideal for sugar mills, textile plants, paper mills, chemic ...

10 MW W H-ALLEN Bedford England Back Pressure Steam Turbine Manufacturer: W H-ALLEN, Bedford, England Type: Back Pressure Steam Turbine Condition: Used – In Good Industrial Condition Availability: In Stock Technical Specifications: Rated Power Output: 10 MW Rated Speed: 7,750 RPM Voltage: 11 kV Frequency: 50 Hz Steam Conditions: Inlet Steam Pressure: 44.8 bar g Inlet Steam Temperature: 400 °C Exhaust Steam Pressure: 1 to 5.2 bar g Heavy-duty British-manufactured back pressure steam turbine designed for continuous industrial power generation and process steam applications. This unit is suitable for combined heat and power systems in sugar mills, textile plants, paper mills, chemical industries, and other steam-based manufacturing facilities. The turbine operates at high efficiency with stable back pressure performance, making it ideal for facili ...

20 MW STAL-LAVAL Industrial Steam Turbine Generator Set Manufacturer: STAL-LAVAL (Sweden) Type: Industrial Multi-Stage Steam Turbine Configuration: Condensing / Extraction-Condensing Manufacturing Era: Circa 1963–1964 Condition: Industrial Condition – Available for Inspection Availability: In Stock Power & Electrical Data: Rated Output: Approx. 20 MW Frequency: 50 Hz Rated Speed: 3000 RPM Generator: STAL-LAVAL GTP Series Generator Poles: 2-Pole Turbo Alternator Cooling System: Radial-flow air ventilation with filtration Coupling: Direct-coupled turbine-generator set Steam Design Parameters: Steam Pressure Class: Approx. 65 bar Steam Temperature (Design): Approx. 480–520 °C Operating Mode: Condensing turbine with surface condenser (extraction capable) Exhaust System: Shell and tube surface condenser Technical Features: Curtis con ...

Manufacturer: AEG Germany Equipment Type: Back Pressure Steam Turbine Generator Power Output: 11,200 kVA (≈ 9 MW) Voltage: 6.5 kV Frequency: 50 Hz Speed: 3000 RPM Generator Type: S 688/4 Condition: Available As-Is, Where-Is Technical Specifications Electrical Output: 11,200 kVA (9 MW) Inlet Steam Pressure: 65 bar Inlet Steam Temperature: 440 °C Steam Consumption (Full Load): 60 tons/hour Exhaust Steam Pressure: 2.5 bar (Max) Exhaust Steam Temperature: 190 °C Voltage: 6.5 kV Frequency: 50 Hz Speed: 3000 RPM Generator Insulation Class: B Description High-capacity AEG Back Pressure Steam Turbine Generator designed for industrial power generation and energy recovery applications. This 9 MW steam turbine system is suitable for industries with continuous steam availability such as: Sugar mills Textile mills Chemical plants Paper mil ...

Dear Ladies and Gentlemen, We constantly have transformer stations for wind turbines in every power and voltage.

In stock on pallet Auction-ID: A1-45495-439

Including pallet Auction-ID: A1-45495-459

2x GE Frame 6B gas turbines # Technical Summary Equipment Details - Gas Turbines: Two GE MS 6001 B gas turbines paired with AEG generators (Type S7102/2). - Operation History: - Commissioning: 1981 - Gas-fired Operation: Until 2005, primarily for base load (~7000 hours/year). - Operational Hours in Combined Cycle: - GT21: ~167,000 hours, ~1130 starts - GT22: ~159,000 hours, ~1180 starts - Retrofitted: In 1996 with water injection for NOx reduction. - Conversion: In 2007 to peak load operation using heating oil (HEL) with new steel chimneys and upgraded control systems to ABB Procontrol 14. - Operational Hours in Peak Load: - GT21: ~130 hours, ~177 starts - GT22: ~150 hours, ~180 starts - Last Network Operation: 2015 - Last Oil Service: - GT21: October 2015 - GT22: September 2016 - Last Borescope Inspection: December 2016 - Defect: Heating oil transfer line issue in 2 ...

Manufacturer: Bell Maschinenfabrik Year of Manufacture: 1988/1989 Design: Horizontal Nozzles: 2 Flow Rate (Q): 2.1 m³/s Net Head (H Net): 209.5 m Power Output (P): 3750 kW Speed: 429 min⁻¹ Operating Hours: 285,000 by end of November 2024 Pelton Wheel: PN25 DN 700 The turbine is sold completely with bearing and control hydraulics, as well as turbine governor, controller, Pelton wheel, and housings, along with supply pipes. Spare runner (11,000 operating hours) is available. Optionally, the generator, including the turbine bearings from AvK, can also be taken over: 10.2 kV, air-cooled. Find more here - / Contact us at -

Manufacturer: Siemens Model: SST-060 Year of Manufacture: 2016 Output Power: 1006 kW (nominal) Speed: 1500 rpm (nominal) Trip Speed: 1605 rpm Live Steam (Inlet Pressure): - Min: 20.6 bar - Nominal: 23.0 bar - Max: 25.4 bar Live Steam (Inlet Temperature): - Min: 300 °C - Nominal: 350 °C - Max: 378 °C Exhaust Steam (Outlet Pressure): - Min: 2.10 bar - Nominal: 3.10 bar - Max: 4.10 bar Exhaust Steam (Outlet Temperature): - Max: 331 °C Find more here - / Contact us at -

Manufacturer: KKK Model: AFA4 / AFA6 TWIN Year of Manufacture: 1997 Output Power: 1822 kW (maximum) Inlet Steam Pressure: 22.9 bar (minimum), 25.5 bar (normal), 28.1 bar (maximum) Outlet Steam Pressure: -0.5 bar (normal), 0.2 bar (maximum) Inlet Steam Temperature: 355 °C (minimum), 405 °C (normal), 415 °C (maximum) Outlet Steam Temperature: 275 °C (maximum) Generator Specifications: Brand: AEM Generator Type: SE 500 M4 Power: 2203 KVA (400 V, 3180 A, 50 Hz) Find more here - / Contact us at -

Manufacturer: KKK Model: CF 5 G Year of Manufacture: 1986 Output Power: 412 kW Inlet Steam Pressure: 19 bar (Normal) Outlet Steam Pressure: 3 bar (Normal) Inlet Steam Temperature: 300°C (Normal) Alternator Features: Brand: AVK Alternator Type: DKBN80/500-4TS Power: 482 KVA (400 V, 696 A, 50 Hz) Year of Manufacture: 1986

Titan T250 Specifications Condition New / Never Used Status Disconnected. Preservation inspection was done in the Fall of 2020 and another inspection in 2022. Manufactured Solar Turbines 2017 Driver Solar Turbines Titan 250 Natural Gas Turbine / Version 30002S CS/MD Max HP 30,000 HP Rated RPM 10,500 RPM Control Panel Solar Turbotronic CTLM02

Large steam generator LOOS, type: UL-S including gas burner WEISHAUPT G50/2-A - LOOS steam generator, built in 1991 for 6,000 kg of steam / h - Steam capacity: 6,000 kg/h - WEISHAUPT burner, built in 2013 - Burner power: 600 - 5,400 kW Viewing possible on request.

in stainless steel sliders, t-pieces, flanges, etc. Price piece: from EUR 80,00 Pipes available approx. 800m Price /m: from 40,00 by DN 50 - DN 120 various steam control valves Price piece: from EUR 180,00

Wolf cooking kettle with mixing work steam-heated approx. 800 to 900 litres of volume outlet DN 100 at the side

One used AEG Kanis G 20 back pressure steam turbine from 1985 in good running condition.  The steam inlet pressure of 14 bar can be increased up to 20 bar. Alternators with other voltages are also available on request. For Sale type: AEG-Kanis G20 el. power: 2046 KW generator end: AEG 2650 KVA, 5250 Volts, 50 Hz, cos phi 0,8 steam consumption: 40 to/h at full load steam inlet pressure: 14 bar (up to 20 bar possible) back pressure: 4,5 bar inlet steam temperature: 320 °C gear ratio: 8,04 manufactured: 1985 mesurements: 8,30 L 3,00 H 4,2 W price on request: Here you can download all the turbine pictures (30 MB):  abc.stromerzeuger-discount.de/AEG-Kanis_G20_back_pressure_2046_kw_stea m_turbine_14_bar/all_pictures.zip Here you can download the scope of supply      (13 MB):  abc.stromerzeuger-discount.d ...

STILMAS pure steam generator - type PSG 3OO DTS - produce saturated dry pyrogen-free pure Steam by using industrial steam as heating fluid. Pure steam DN 50 PN 16 Sampling discharge: ½” Triclamp Industrial steam DN 40 PN 16 Condensate discharge: DN 25 PN 16 Cooling water outlet: ½” Triclamp Safety valve: DN 40 PN 16 Cooling water inlet: ½” gas M. Electric line 380 V/50 Hz Compressed air 6 bar Main components: A) E 020 DOUBLE TUBE SHEET EXCHANGER - Construction in AISI 316 - ISPESL tested - Design pressure: shell side 10 bar – tube side 6 bar B) ER 020 EVAPORATION CHAMBER AISI 316 L construction ISPESL tested - Design pressure: 6 bar C) SUPPORT FRAME Painted carbon steel construction D) FEEDWATER PUMP P 020 AISI 316 stainless steel construction Type GRUNDFOS CRN 2 – 70 ( See Annex n° 24) E) SAFETY VALVE PSV 020 - SN - AISI 316 STAINLESS STEEL CO ...

Choice of 3 x RENTEC n.v. (Belgium) steam heated autoclaves Internal dimensions: 3000mm dia x approx 2500mm long (inc. dished end and door), Working pressure 10 Bar, Hydraulic Bayonet type door Year of manufacture 1995 Drawings and documentation available. No controls or hydraulic unit for door (all 3 were running off 1 pump). In very good condition.

Product number: 920 Year of construction: 2005 Belt width: 700 mm Belt length: 15000 mm Power: 3 x 400V, 50Hz Dimensions: 15000 x 2100 x 4150 mm Siemens control panel

Turbine Turbine operating hours: 30,000h Backpressure turbine Manufacturer: Kkk First start-up: 2002 Type: CFR5 G6a Power max: 2500 kW Operating efficiency: 2200 kW, Number of revolutions: 23000 rpm, Live steam pressure: 65 bar, Live steam pressure temperature: 480 C, Evaporation pressure: 1-17 bar, Investments in 2002 , Entire steam transformation station renewed from 63 bar to 2.5 bar in 2002, El. Generator Fa. Leroy Somer, el. Power 2 MW, 525 V, 2488 kVA, renewed, complete measurement, control and control of the turbine renewed, steam turbine renewed with energy production General overhaul of the entire plant from 2002 to 2004, steam generator renewed, automatic corder and ash removal system renewed, water treatment plant renewed, complete instrumentation renewed, flue gas cleaning plant Lurgie renewed from 1991 - 2001 Mistakes excepted!

The steam humidifier Defensor Mk5 is a pressure steam generator. It works on the principle of resistance heating. It is designed to directly (with ventilation) and indirect (corded steam distribution) humidifying of the air in conjunction with ventilation systems and air conditioning. Parameter Air Fan: Voltage: 200-240 V 50/60 Hz power consumption = U: P 26 W = maximum steam output: 16.0 kg / h Parameter MK5 Visual VE 8: 400V/3/50-60Hz, 6.1 kW