steam inject used for sale

Negri Bossi NB 250 Injection Moulding Machine power output: 79kw Dimensions: 620014002000 weight: 10,560 kg screw size: 60 mm column spaces: 460460 mm plate dimensions: 860860 mm

The BATTENFELD BA 600 CDC injection molding machine was built in Austria in 2002. It is equipped with Unilog B4 control. It has a closing force of 600 kN forms. The screw diameter is 33 mm and the injection volume is 99 cm3. The machine has plates for mounting injection molds with dimensions of 511 x 511 mm, and the clearance between the columns is 320 x 320 mm. The injection molding machine is equipped with a receiving robot, hot runners, a conveyor belt for collecting moldings, four pillows, a string of cores and technical documentation. Technical parameters of the BATTENFELD BA 600 CDC injection molding machine – control: Unilog B4 – dimensions of tool plates: 511 x 511 mm – clearance between columns: 320 x 320 mm – tool height, min. : 150 mm – opening path: 511 mm – injection pressure: 2022 bar – injection volume: 99 cm3 – injection weight: 90 g – screw  ...

H400 RS115/100 (29:1) o 1x hydraulic function MVP o 1x hydraulic function STP o Euromap Mold Mounting Pattern o No Walkway o Ring check valve o Pin shut off nozzle o Barrier screw MFI 5-30 o Hotrunner control package 24x3 A + 5x 15A o Mixer blender signal o SPC/SQC o 2 Pneumatic valve gates o Euromap 12 Robot Interface o Side Entry Robot interface o Early injection o Proportional carriage control o Dry contact for separate external mold heats controller

Closing unit Closing force: 1400 kN Other Equipment : Commissioned: 1999 Number of hours: 46868 h Tonnage: 140

Used machine in good condition. Available for immediate delivery. - Air Valves: n/a - Distance between tie-bars (h x v): 1.810 x 1.610 mm - Screw diameter: 140 mm - Shot weight max: 8.630 (PE) g - Shot weight max: 10.880 (PS) g - Injection rate: 1.510 cm?/s - Injection volume: 11.820 cm? - Screw speed: 90 / 90 / 75 rpm - Screw L/D ratio: n/a - Nozzle stroke / force max.: 600 mm / kN - Nozzle stroke max: 350 mm - Clamping force: 25.000 kN - Mould opening stroke max: 2.700 mm - Mould height max: 1.700 mm - Mould height min: 900 mm - Daylight between platens max: 3.600 mm - Platen size (h x v): 2.480 x 2.250 mm - Cascades / Sequential valve gates: n/a - Heating zones: n/a - Ejector force: 60 kN - Control: HICOM-5000 - Core pulls: n/a - Oil tank capacity: 3.800 l - Operating hours: 635 - Power: installed max: 85 + 55 +55 +55 +11 kW - Dimensions (long x wide x ...

The machine is fully equipped with equipment, i.e.: a plastic hauler and a plastic mill/cascade crusher. Year: 2015

Used machine in good condition. Available for immediate delivery. - Screw diameter: 80 mm - Clamping force: 2.500 kN - Shot weight max: 1.441 g - Injection rate: 2.000 cm?/s - Injection pressure: 1.665 bar - Injection volume: 1.583 cm? - Screw speed: 240 rpm - Screw L/D ratio: 19,3 - Nozzle stroke / force max.: - / 115 mm / kN - Ejector stroke / force max.: 200 / 85 mm / kN - Mould opening stroke max: 850 mm - Mould height min: 345 mm - Daylight between platens max: 1.195 mm - Platen size (h x v): 970 x 1.035 mm - Heating zones: 4 + 1 - Distance between tie-bars (h x v): 630 x 630 mm - Ejector force: 85 kN - Mold opening force: 144 kN - Oil tank capacity: 680 l - Power: installed max: 77 kW - Weight: 18.500 kg - Dimensions (long x wide x high): 8.220 x 2.160 x 2.660 mm

Cycle Times: ? 28 gm (48 cavity) : 24~25sec ? 56 gm (48 cavity) : 25~26sec Including - Mold, 48 Cavities, 27g, for 250ml and 300ml. (Milk Bottle), Mold is not used a lot. - YUDO Side Entry robot included. - Screw diameter: 105 mm - Shot weight max: 3.950 g - Injection pressure: 1.280 bar - Clamping force: 4.500 kN - Mould opening stroke max: 820 mm - Distance between tie-bars h: 850 mm - Distance between tie-bars v: 740 mm - Power: installed max: 390 kW

included Sepro, with accumulator - Distance between tie-bars (h x v): 630 x 630 mm - Air Valves: 1 - Screw diameter: 60 mm - Shot weight max: 694 g - Injection pressure: 2.144 bar - Injection volume: 763 cm? - Clamping force: 1.750 kN - Mould height min: 295 mm - Daylight between platens max: 750 mm - Heating zones: 4 - Platen size (h x v): 1.035 x 970 mm - Ejector force: 0 kN - Control: IQT6 - Core pulls: 1 - Operating hours: 82.000 - Power: installed max: 55 + 29,3 kW - Weight: 11.200 kg - Dimensions (long x wide x high): 6.900 x 2.000 x 2.600 mm

Used machine in good condition. Available for immediate delivery.

ENGEL two shot (2k) 2300 ton injection molding machine -Model : DUO 23050H/11050M/2300 COMBI -Manufactured year : 2009

Recon ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts of different manufacturers/types available. We are happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

PET PREOFRM injection mould Hotrunner : PET injection mould Manufacturer: HUAYAN HR 61 Hotrunner from the manufacturer Husky Year of construction: 2010 General overhaul 2017 Sketch see PDF Cavity: 48 cavities Preform: 21.7 g (PCO 1881) with mould and thread set and cooling mould

Inv. Num: 5345 Type: Insert 330H 90 Producer: Engel Generated: 2006 Parameters: Clamping force: 340 t Injection capacity: 113 cm3 Screw diameter: 30 mm Facilities: Turntable

Injection moulding machine 3-colours (horizontal /vertical/ and 3rd in L-position with protective enclosure) with turntable available now from our warehouse Hannover Make: Arburg Type: 420C 1000-150/150/60 Built in 2003 Control: Selogica Hours: 20092 h +Closing Unit+ Clamping force: 1000 kN / 1000 to. Tie bar ratio: 420 x 420 mm Plate size: 570 x 570 mm Injection Unit 1 (150 unit) Screw size: 15 mm (high-screw) Pvlzwy Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2750 bar Injection Unit 2 (150 unit Screw size: 15 mm (high-screw) Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2750 bar Injection Unit 3 (60 unit) Screw size: 15 mm (high-screw) Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2080 bar extras 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection moulding machine Tool clampi ...

Used machine in good condition. Available for immediate delivery. - Screw diameter: 95 mm - Injection pressure: 2.230 bar - Injection volume: 3.544 cm? - Screw L/D ratio: 26,4 - Ejector stroke / force max.: 300/285 mm / kN - Clamping force: 13.500 kN - Mould height max: 1.400 mm - Mould height min: 800 mm - Daylight between platens max: 3.100 mm - Platen size (h x v): 2.300 x 2.010 mm - Distance between tie-bars (h x v): 1.700 x 1.350 mm - Control: POLARIS - Core pulls: 2 - Power: installed max: 180 + 87 kW - Weight: 70.000 kg - Dimensions (long x wide x high): 12.000 x 3.500 x 5.000 mm

includes FMR6-5 Robot (Wemo) X: 420mm / Y: 1200mm / Z: 2.150mm / C: 90? Rotation 1 x gripper / 1 x vacuum incl. safety fences + conveyor belt 3000 x 600 - Screw diameter: 45 mm - Clamping force: 1.500 kN - Shot weight max: 272 g - Injection pressure: 1.568 bar - Injection volume: 286 cm? - Mould opening stroke max: 440 mm - Mould height max: 510 mm - Mould height min: 150 mm - Daylight between platens max: 950 mm - Distance between tie-bars (h x v): 510 x 510 mm - Control: Endura Touch - Core pulls: 2 - Weight: 7.500 kg - Dimensions (long x wide x high): 6.400 x 2.000 x 2.500 mm

MACHINE IN GOOD CONDITION NEGRI BOSSI CANBIO Injection moulding machine

DEMAG ERGOTECH- EL-EXIS E 1000/420-310 (130) Built: 2003 specifications Screw diameter [mm]: 35 Spray weight [g]: 150 Spray pressure [bar]: 1865 Closing force [kN]: 1000 Tie bar distance [mm]: 420x420 Clamping plate size [mm]: 600x600 Tool installation height min. [mm]: 200 control Control: ERGOcontrol Monitor: Yes Control cabinet: Yes Language: Yes other Power [kW]: 46.7 Engine hours [h]: 67455 Dimensions [m]: 4.6x1.5x2.1 Weight [kg]: 6500 - KNIESCHLIESSEINHEIT - CORE TRAIN - EUROMAP - AIR VALVE

Type: IMAX 520 Working with boneless meat Product width: 520 мм Cycles: 15 to 60 per minute Feed: max. 60 mm Product height: 130÷230 mm Number of needles: 200 (2 х 100), 4 мм Brine pressure: 0,5-4,5 bar Machine charging height: 1170 mm Compressed air: 6bar Voltage: 230/400 V, 50/60 Hz Connection: 10,0 kW ; 23 А Rotary brine filter DF 510 Machine dimensions in mm: Length: approx. 2100 Width: approx. 1350 (about 2500 mm with filter) Height: approx. 2300

This Husky H225 RS 55/50 Injection Moulding Machine was manufactured in the year 2013 in China and has 62435 hours. The machine has a closing force of 2250 kN and a screw diameter of 50 mm.

Type: N 50 Number of needles: 50 Diameter of needles: 4,0 mm Max. product width: 350 mm Transportation type: walking beam Product passage height: max 180 mm Brine pressure: 0,5 - 4,0 bar Machine dimensions in mm: Width: 800,0 Length: 1600,0 Height: 1900,0 Power: 8,0 kW , 17 A Voltage: 380 V, 50Hz

This Sumitomo Demag Systec 1300 1500-9500 Servo Injection moulding machine was manufactured in the year 2019 and has 17522 production hours, of which 3695 are heating hours.

This HAITIAN JU650II Injection moulding machine was manufactured in the year 2018 in China. The machine has a clamping force of 6500 kN and a screw diameter of 80 mm.

This ENGEL ES 500/110 HL Injection moulding machine was manufactured in the year 2001 in Austria. The machine has a clamping force of 1100 kN and screw diameter 40mm. It comes with a linear robot ENGEL ERC 23/2-EA (2002). Production hours are at 98167.

Aburg 470C-2000-800 SKU: 49 Availability: In stock Built: 2006 Brand: Arburg specifications Spray weight: 510 g Closing force 2000 kN Screw diameter: 60 mm Spray pressure: 1380 bar Tie bar ratio: 470x470 mm Clamping plate size: 730 x 730 mm Tool installation height min.: 250 mm Control: Selogica Language: Polish Power: 44.9 kW Engine hours: 57310 h Weight: 6830 kg Air valve: Yes

This Krauss Maffei PX 121-540 injection moulding machine was made in the year 2017. It is equipped with a Krauss Maffei MC6 control unit. The machine has a clamping force of 1200 kN and screw diameter of 40 mm.

This Arburg 370C-800-250 Injection moulding machine was manufactured in the year 2006 in Germany. It is equipped with an ARBURG SELOGICA control unit. The machine has a clamping force of 800 kN and a screw diameter of 30-40 mm.

This Arburg 370C-800-250 Injection moulding machine was manufactured in the year 2001 in Germany. It is equipped with an Arburg control unit. The machine has a clamping force of 800 kN.

KRAUSS MAFFEI KM 110-520 C1 warehouse no.: 503020 manufacturer: KRAUSS MAFFEI type: KM 110-520 C1 controller: MC4 year of construction: 2003 technical data clamping unit clamping force: 1100 kN distance between tie bars h:: 470 mm distance between tie bars v:: 470 mm size of mould plates h: 745 mm size of mould plates v: 770 mm min. mould height: 300 mm max. open daylight: 900 mm opening stroke: 600 mm ejector stroke: 150 mm ejector force: 22 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 1485 kg technical data injection unit screw diameter: 40 mm swept volume: 217 ccm injection pressure: 2377 bar screw length: 23 l/d screw speed: 307 min plasticising rate: 22 g/s PS injection rate into the open: 126 g/s PS number of heating zones: 5 measures & weight measures of machine lxbxh: 4.4m x 1.5 ...

This ARBURG 470C 1500-675 Injection moulding machine was manufactured in the year 2003 in Germany. The machine has clamping force of 1500 kN, a Opening stroke max. of 500 mm and a Mould height of min 250 mm.

This ARBURG Allrounder 520 C 2000-675 Injection moulding machine was manufactured in 2002 in Germany. It is included a pallet protective fence (approx. 100 kg // 2000x1100 mm).

This Battenfeld HM 13000/9200/7700 Injection moulding machine was made in 2004 in Germany and has 67871 hours. The machine has a clamping force of 13000 kN and a screw diameter of 120 mm.

This Krauss Maffei KM 280-1400 C3 injection moulding machine was made in the year 2003 in Germany and has 60000 hours. The machine has a clamping fore of 2800 kN and an injection pressure of 2380 bar.

This KRAUSS MAFFEI 50-180CX Injection moulding machine was manufactured in the year 2013 in Germany. The machine has a clamping force of 500 kN.

This FOSTAG 64fold injection mold for injection moulding machine was built in the year 2003 in Switzerland.

Manufacturer: Arburg Type: 320 C 600 - 250 Year of construction: 2003 Control: Selogica Closing type: Hydraulic Closing force: 600 kN Tie bar spacing: 320 mm x 320 mm Plate size: 446 mm x 446 mm Tool height: min 200 mm Opening distance: 350 mm Plate spacing max.: 550 mm Screw: 35 mm Stroke volume: 106 ccm / 89 gram PS Injection pressure: 2470 bar general Engine: 15 kW Heating: 5.5 kW Dimensions: 3.4 m x 1.5 m x 1.6 m Weight: 2080 kg Screen text: German Optional extras Core train x1 Robot interface Sorting flap Hot channel integrated

Manufacturer: Arburg Type: 270 C 400 - 100 Year of construction: 1998 Control: Selogica Closing force: 400 kN Closing type: Hydraulic Tie bar spacing: 270 mm x 270 mm Plate size: 446 mm x 446 mm Tool height: min 200 mm Opening distance: 350 mm Plate spacing max.: 550 mm Screw: 30 mm Stroke volume: 70 ccm / 64 gram HP Injection pressure: 1550 bar general Engine: 11 kW Heating: 5.9 kW Dimensions: 3.42 m x 1.5 m x 1.7m Weight: 1980 kg Screen text: German Additional equipment Core train: x1

This LS MTRON LGH170D-ES Injection moulding machine was manufactured in the year 2017 in China. This machine has a 1706 kgf/cm2 pf pressure. Contact us anytime for further questions.

Manufacturer: Arburg Type: 221KS 350 - 100 Year of construction: 2001 Control: Selogica Closing force: 350 kN Locking type: Knee lever Tie bar spacing: 221 mm Plate size: 324 mm x 250 mm Tool height: min 150 mm - 300 mm Opening distance: 200 mm Plate spacing max.: 350 mm - 500 mm Screw: 25 mm Stroke volume: 49 ccm / 41 gram PS Injection pressure: 2000 bar general Engine: 7.5 kW Heating: 4.5 kW Dimensions: 2.7 m x 1.4 m x 2.2 m Weight: 1150 kg Optional extras Robot interface

This Krauss-Maffei 160-380 CX Injection moulding machine was manufactured in the year 2016 in Germany. It is equipped with a clamping force of 1600 kN, a SP 380 injection unit with a screw diameter of 35 mm. Shot weight for PS is at 140g.

Manufacturer: Arburg Type: 221K 350 - 100 Year of construction: 2001 Control: Selogica Closing force: 350 kN Locking type: Knee lever Tie bar spacing: 221 mm Plate size: 324 mm x 250 mm Tool height: min 150 mm - 300 mm Opening distance: 200 mm Plate spacing max.: 350 mm - 500 mm Screw: 25 mm Stroke volume: 49 ccm / 41 gram PS Injection pressure: 2000 bar general Engine: 7.5 kW Heating: 4.5 kW Dimensions: 2.7 m x 1.4 m x 2.2 m Weight: 1150 kg

This Battenfeld HM 10000 Injection moulding machine was manufactured in the year 2005 in Germany. The machine has a clamping force of 10000 kN.

This Netstal SynErgy 1500-460 Injection moulding machine was manufactured in the year 2003 in Switzerland. It is controlled by a Netstal control unit. The machine has a clamping force of 1500 kN.

Manufacturer: Arburg Type: 270 S 250 - 150 Year of construction: 1997 Control: Selogica Closing type: Hydraulic Closing force: 250 kN Tie bar spacing: 270 mm x 270 mm Plate size: 400 mm x 400 mm Tool height: min 200 mm Opening distance: 275 mm Plate spacing max.: 475 mm Screw: 25 mm Lifting volume: 54 ccm / 45 gram PS Injection pressure: 2500 bar general Engine: 11 kW Heating: 4.8 kW Dimensions: 3.2 m x 1 m x 1.6 m Weight: 2100 kg Screen text: German Optional extras Core train x2 Robot interface Air valve Sorting flap

Manufacturer: Arburg Type: 270 S 250 - 60 Year of construction: 1997 Control: Selogica Closing type: Hydraulic Closing force: 250 kN Tie bar spacing: 270 mm x 270 mm Plate size: 400 mm x 400 mm Tool height: min 200 mm Opening distance: 275 mm Plate spacing max.: 475 mm Screw: 25 mm Stroke volume: 39 ccm / 33 gram HP Injection pressure: 1800 bar general Engine: 7.5 kW Heating: 2.7 kW Dimensions: 3.2 m x 1 m x 1.6 m Weight: 1900 kg Screen text: German Optional extras Picker Gaiger Robot interface Air valve

This Tederic DE360 Injection moulding machine was manufactured in the year 2018. It is equipped with a TEDERIC KEBA 2880 control unit. The machine has a conveyor belt of 3000 x 600 mm.

Manufacturer: Arburg Type: 220 S 250 - 60 Year of construction: 1999 Control: Selogica Closing type: Hydraulic Closing force: 250 kN Tie bar spacing: 220 mm x 220 mm Plate size: 400 mm x 400 mm Tool height: min 150 mm Opening distance: 275 mm Plate spacing max.: 425 mm Screw: 18 mm Lifting volume: 20 ccm / 17 gram PS Injection pressure: 2500 bar general Engine: 7.5 kW Heating: 4 kW Dimensions: 2.9 m x 1 m x 1.6 m Weight: 1900 kg Screen text: German Optional extras Robot interface Air valve Hot channel integrated

Manufacturer: Arburg Type: 221K 350 - 100 Year of construction: 09/2005 Control: Selogica Closing force: 350 kN Locking type: Knee lever Tie bar spacing: 221 mm Plate size: 324 mm x 250 mm Tool height: min 150 mm - 300 mm Opening distance: 200 mm Plate spacing max.: 350 mm - 500 mm Screw: 25 mm Stroke volume: 49 ccm / 41 gram PS Injection pressure: 2000 bar general Engine: 7.5 kW Heating: 4.6 kW Dimensions: 2.7 m x 1.4 m x 2.2 m Weight: 1200 kg Optional extras Core train x1 Hot channel integrated

This Husky H225 RS 45/38 Injection Moulding Machine was made in the year 2013 in China and has 54744 hours. The machine has a clamping force of 2250 kN and a screw diameter of 38 mm.