steam heater used for sale

Dryer coolerOTW 150 never used.., For cereal flakes, seeds of any type...for extruded products... never used with fan, cyclone... in perfect working order for extruded products, cereal flakes... and many many other products can dry or cool both functions with steam drying battery Enquiries welcome. Also a CROIX single screw extruder, 75KW 4/6 barrels suitable for pet food, full fat soya .. and many other purposes Visible in Brittany- France

Stephan UMHC403E-GNi Pilot Universal Machine with control cabinet Double jacket Steam injection nozzles Knife insert Lid with pressure-resistant closure Feeder containers Steam transfer station Outlet on the boiler electrically driven stirring blade 3 Speeds Machine tiltable Safety device on the lid not functional, machine runs with the lid open Sight glass of the flow meter at the rear of the control cabinet defective Machine should be repainted and overhauled Voltage 400V Fuse: 32A Machine must in any case be thoroughly cleaned before use Video about test run and further pictures available

Stainless steel tube bundle heat exchanger Coat and pipes made of 1.4571 Power 600 kW 7,400 litres of water from 10 °C to 80 °C at 8 bar saturated steam and 90 °C condensate temperature To the pipes: Pressure 13 bar Operating temperature 200 °C Content 33 litres In the pipes: Pressure 10 bar Operating temperature 120 °C Content 18 litres

Graham Steam tunnel Model: Z3271 2010, Stainless frame and stainless mesh belt, 3000mm x 380mm belt, variable speed, with Hydromatik steam generator, 3Ph

Used High-speed Horizontal form-fill-seal machine Fuji Alpha VII 3430 is specifically designed to package various sizes of product for a variety of industries. Machine type :FW3430/B End sealer diameter : B125 Capacity :10 to 100 packs/min Cut length: 130 to 430 mm (Up to 3,999 mm according to the spec.) Product size to be wrapped Width: Up to 170 mm Height: Up to 30 mm Wrapping film width: up to 650 mm Outside diameter: up to 300 mm Wrapped products properties: Individual food, chemicals or manufactured products Wrapping materials properties: Film which can heat and seal Motor capacity: 3.39 kW Heater capacity: 3.15 kW Electric supply source Three-phase AC 200 V 50/60 Hz 30 A (Transformer for other voltage included) Power consumption 6.54 kW

• Heating tunnel INFID: • Year: 2009 • Producer: INFID • Speed (BPH): 7.000 bph • Used Heating tunnel INFID composed of: • 8.5 m2 internal heating tunnel. • No. 2 centrifugal pump for hot water recirculation. • No. 2 recovery tanks with water heating by steam. • Suitable for heating approximately 7,000 bph of 0.750 liters of sparkling wine. • Dimensions: - Length 5,500 mm X width 2,800 mm. • All in stainless steel. • 2-way belt for bottle entry. • 3-way output belt. • Safety protections. • Code Y 10

Aseptic filtration system Mona. YOM 2008 Technical data: Capacity for concentrate: approx. 5.8 m3 / h (8000 kg / h). Plate filter area: approx. 55 m2. Control system: Simatic S7. The cooling capacity of device: 154 kW. Electric power connected: approx. 100 kW. Steam consumption: approx. 200 kg/h. Steam pressure: 2 Bar. The MONA system is used to improve the quality of the concentrate before loading. The quality is improved by pasteurization of the finished product with the possibility of its pre-treatment on a plate filter. The use of appropriate filter plates allows to reduce the turbidity of the juice and obtain better microbiological parameters by eliminating bacterial spores resistant to the temperatures used in pasteurization. Technical description of the device The device consists of the following elements: five-section plate exchanger, on which the temperature is  ...

Powder mixing plant Ytron Dr. Karg, built in 2012 and with Flow tank. Capacity up to 10 to/h The powder was treated via pipes into the flow vessel. The whey or milk powder mixture was via the plate heater and hot water Cycle in batch operation with the basic tanks set and then released for further processing. With frame and staircase a.) With a GEA plate heater for treatment the powder water solution. Hersteler FA. GEA TDS GmbH, Sarstedt Type: VT 20 CD-9-C-16 170/7412 No. 3600 4074, year of construction 2012 b.) With wall-mounted control cabinet system Siemens S 7 for process technology, CIP tank system and Control of cleaning paths c.) With 1 CIP system for the standing tank as a 1-tank cleaning system for the Batch operation and for the powder mixing plant Self. Content CIP tanks 15,000 l insulated, deformed inwards in the upper area with valve no ...

A 7-stage GEA Wiegand evaporation plant with mechanical vapour compression, Made of V4A material with 2 identical high concentrators and one Vapour compression system for 2 Hoko systems. Capacity: 50,000 litres per hour Year of manufacture 2007 Product enema: 52,000 kg or 38,500 kg/h Concentrate: 12,240 kg or 18,900 kg/h for truck transport Steam consumption Low pressure steam : 300 kg/h with Live steam: 1,000 kg/h, when heating the system max. 2,300 kg/h further energy data can be found in the plant With a concentrate supply tank and with a complete cleaning system, location ground floor with complete tank piping to 2 x 50,000 l tanks and with complete control in Siemens S 7, as well as for the Entire electrical supply with 5 wall control cabinets for pneumatic cabling housed in 5 control cabinets, with various smaller frequency converters and 1 frequency con ...

51 MW - CCGT comprising 3 x 12 MW Solar Gas Turbine generator and 1 x 15 MW steam turbine generator Model : TITAN 130 Capacity : 12 MW Voltage ; 11 KV / 50 Hz Qty : 3 sets Titan 130 + 1 set STG Year : 2012 Running hr : 6000 hrs since new

Electric shrink tunnel 12 Electric thermal tube Electrical: 3 Phase, 24 kWt Weight: 420kg - 3-step heat isolation design for energy saving and operator protection. - Digital control, internal circulation keeps temperature consistent and shrinking effect perfect. - Equipped with high-level VFD(Variable Frequency Drive) that makes controlling of wind speed easy. - Unique wind board design makes controlling of wind direction easy and flexible, able to adapt to different bottles. - Durable electric heater tube ensures efficient heating. - Panel is embedded to prevent operators changing setting accidentally. - Heating can be stopped immediately, or maintained by time

2 nos. GE PG9171E 180MW / 50 Hz gas fired combine cycle gas turbine power plant, year 2004, around 31,000 hr - 34,300 hr, Steam turbine is 60MW each , and complete with heat recovery boiler. Welcome enquiry for buying only 1 or 2 gas turbine or includes engineering works.

Cleaning system make DÜRR type Ecoclean 18 W / DT 16/10Fabr. -No: 5031 built in 1999Workpiece width max.: 700 mmWorkpiece height max .: 600 mmWorkpiece weight max.: 1000 kgContainer capacity: 1.5 m³Working temperature: 45 - 70 °Pump capacity: 35 m³ / hPump power: 7.5 kWPump pressure: 4 barNumber of hand nozzles: 3general spray system: on all sidesTurntable Drum: 1400 mmMax. Table load: 1.5 tRotary table speed: 0.3 - 1 rpm.Max. Feeding quantity: 500 kgusable area: 1.5 m²Weight of the system: 3.0 tDrive power of the turntable: 7.5 kWConnected load: 57 kWWater connection: R1 Fresh water consumption approx. 50-100 l / hHeating power: 48 kWHeating time: 2.2 hExternal dimensions of the system: 4460 x 2970 x 3750 mmWith- Loading trolley- Cover that closes the treatment roomxa0xa0(2 vertical lifting columns with geared motor)- rigid spray system- add. 3 manual externally operable nozzles- C ...

year: 1991, modification controls and measuring technique 2004 no of tanks: 3 pcs (water, caustic, recovered water) material: s/steel heating: steam Consisting of: 1 x CIP-caustic tank content: 7.000 l, make: AMS 1 x CIP-hotwater tank content: 7.000l, make: AMS 1 x recovered water content: 4.000l, make: AMS - controls Siemens S7, new measuring technique 2004 - incl. all valves and pumps - incl. heat exchanger - incl. internal piping

Steam degreaser Fabr. RFT Cleaning and filter technology Type CLEAN MASTER CM 200-0 NTwith control program RDEP 60 for S 5 100 UTechnical specifications:Working space:Length: appro:. 2200 mmWidth: approx: 890 mmHeight: approx: 1150 mmDesorption temperature: approx: 80 - 180 degreesSteam level - Temperature: approx: 50 - 100 degreesSpraying device approx: 10 secondsP max: 14 kWL x W x H approx.: 4500 x 2100 x 1800 mmWeight: approx: 2500 kgWith- Control program RDEP 60 for S 5 100 Uused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Key data: 800 , 149 , 35

Manufacturer: Demag Type: 80/420 - 310 concept Built: 2005 Control: NC 4 Control Type of closure: Hydraulish Closing force: 800 kN Tie bar ratio: 420 mm x 420 mm Plate size: 580 mm x 590 mm WZ Installation height: 250 mm Opening distance: 500 mm Plate spacing max: 750 mm Screw: 35 mm Lifting volume: 149 gram PS / 168.3 cc Spray pressure: 2020 bar General Engine: 18.5 kW Heater: 8.8 kW Dimensions: 3.9 m x 1.4 m x 1.9 m Weight: 4100 kg Screen text: German Optional extras Core train: x1

Many thanks for your interest in our machinery, please find below our offer: Manufacturer : Chocotech Wernigerode (Sollich) Type : Sucrotech cooking plant with Sucrostar & Sucrotwist cookern Year of made : 2012 like new condition Electrical : 400V 50 Hz, 3Ph dimensions : 10000 x 5000 x 2700 (lxwxh in mm) Output/performance : 200-300kg/h (manufacturer information) in depend of product different: - Chocotech cooking system type Sucrotech, consisting of, - Sucrotwist 3m² cooker all sugar and sugar-free masses - Sucrostar cooker with cooler - Preparation tank 150l - pre-dissolving tank 200l - aroma dosing - acid dosing - Alcohol dosage with 100l alcohol tank - Aftercooler with temperature control unit - top condition – Like NEW (Only testrun after installation) - dismantled The Sucro Twist Cooking System can be used for pre- and final cooking of sugar ...

Key data: 1000 , 205 , 40

Manufacturer: Demag Type: 100/420 - 430 concept Built: 2004 Control: NC 4 Control Type of closure: Hydraulish Closing force: 1000 kN Tie bar ratio: 420 mm x 420 mm Plate size: 590 mm x 600 mm WZ Installation height: 250 mm Opening distance: 500 mm Plate spacing max: 750 mm Screw: 40 mm Lifting volume: 231 cc / 205 gram PS Spray pressure: 2020 bar General Engine: 18.5 kW Heater: 11.1 kW Dimensions: 4.9 m x 1.6 m x 2.1 m Weight: 4800 kg Screen text: German Optional extras Core train: x1 Air valve: x1 Robot interface

Complete Acrylic mIll machinery for sale: NSC Schlumberger & Cie. 1. Breaking Converter - ТВ-10, year 1999 - 1 piece. 2. Breaking-mixing machine R5GC15, year 1999 – 1 piece. 3. Drawing machine GC15656RE, year 1999 – 1 piece. 4. Drawing machine GC15683, year 2001 - 1 piece. 5. Drawing machine GC15698, year 2001 – 1 piece. 6. Roving machine FM-20, year 2003 - 1 piece. 7. Spinning-winding machine with steaming Zinser Germany Model 319LSL, year 1985 linked with Murata 7-V, year 1997. 2 pieces. All machines are in excellent working condition. Machines are on floor and all spare parts goes with the machines Sliver cans are available free of charges

Vacuum homogenesia system Made Haagen & Rinau Type Unimix RU IV 200 Useful content 200lt Stirrer m. scraper 1500/300 UPM 3.7/4,4 KW Homogenizer 1500/300 UPM 2.0/2.4 KW Heating by steam double sheath, max 6bar

1 MONTI ANTONIO continuous belt press for knitted fabric ironing/finishing, with steaming upper plate type 205

P228 - 4x used approx. 50 m³ / 50,000 L polyester tank, GRP tank, aboveground, vertically standing, flat bottom, in good condition. technical details: capacity: approx. 50 m³ / 50,000 litres material: polyester tank / GRP tank manufacturer: Reich-Tank dimensions: Ø approx. 3.00 m × h approx. 7.20 m Used, in good condition, manufactured by Reich company, vertically standing storage tank on flat bottom, lid on the roof, several connections, inlets and outlets. This container can be used as a storage tank for many different media such as water, liquid food, whey, potato steam skins, molasses, manure, seepage juice, rapeseed oil or as a rainwater collection tank, etc. Price upon request. Transport can be arranged at low cost. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has al ...

Steam boiler / Dampfkessel FAKO RP580 with universal burner Oilon GKP50H (for natural gas, propane butane gas and heating oil) with universal burner Oilon GKP50H (for natural gas, propane butane gas and heating oil) Year of manuf. / Built: 2004 Temp. 120 °C Press. 2 bar Power 400 kW

Safety valve Handtmann DN 32 Steam/ Gas Input DN 25 Output DN 32 Length 270 Material stainless steel 1.4307 Pressure 0.2-2.5 bar

Dresser-Rand steam turbine (new price 2.8 million EUR), unused and as good as new - built 2009 - inlet steam stream 53,000 kg/h - 1 generator type Syn. 3 phases - 60 Hz, 12.3 MW - 4,500 rqm / 1,800 rqm - gearbox RENK type TL-500, BJ. 2009, GEA surface capacitor, type 2/III/H, BJ 2007, 2 condensate pumps type Etanorm G080-400 G11, BJ 2007

Flow filter, membrane filter housing, MSS 5010 GNW 50BH4, Pall, Stainless steel, used Top Attention! We have set the lowest price on the market for a comparable used part. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Used part! The part was purchased from a spare parts warehouse of a company, is in very good condition and fully functional. - The filter is completely clean and bright. - Stainless steel (316L), - Incl. 5 cartridge filters - Cartridge filter length approx. 52cm - Incl. pressure manometer, - max. operating pressure 10 bar - max. temperature 95°C - 38 x 30 x 127cm high, 30kg, - Product connections in nominal width 50 / dairy pipe thread - high quality pharmaceutical version - for H2O: 10-15,000 l/h, for wine depending on application 1,000 to 2,000 l/h, for spiri ...

continuous grilling line all stainless steel bottom contact grilling + hot air suitable for steam injection belt width 1,100 mm net length 11,000 mm underplate max. 260°C air temperature max. 280°C dimensions (l x w x h) : x 13,500 x 1,700 x 2,400 mm independent platen - air temperature and steam control adjustable speed PLC control Siemens frequency (new hard- and software, frequency inverters) With new Teflon belt suitable for thermic oil heating (600 kW) with belt wash system

ELWIK RT-C1 hot runner control system is a very important device for ensuring the right temperature during the injection process. The temperature controller for an injection moulding machine, having one heating zone with current load of 16 A, is used in cooperation with central nozzles, which enables the processing of all types of plastics. The temperature can be regulated from 0°C to 500°C. Thanks to the functions and protections used, the temperature cmould temperature controller guarantees continuous and uninterrupted operation, preventing, for example, complete burning out of the heater by drying it when the supply voltage is reduced. The extremely important auto-adaptation function automatically sets the P, PI, PID parameters without exceeding the set temperature, while the sequential control, especially important with a large number of nozzles installed in the mould, significa ...

Capacity: 600 l Heating: steam, 127 kW, 8 bar Outside dimensions 110 x 130 x 135 cm (HxWxD) Inside dimensions 60 x 109 x 88 cm (HxWxD) Control: MC K Mouting Voltage: 230/400 V , 50 Hz Cover: insulated,with springs and hinges of stainless steel, opening 90° Drainage: piston – type drain cock Equipment: valves for cold and hot water

ELWIK RT-C hot runner control system is a device for ensuring the right temperature during the injection process. The mould temperature controller, built in a panel system, adjusts temperature in the range from 0 to 500°C using a coding switch. The advanced technology and safety features included in the device guarantee uninterrupted and reliable operation of the mould temperature controller. The P, PI, PID parameters are set automatically by the temperature controller to the injection moulding machine, thanks to an auto-adaptation function that ensures that the pre-set temperature is not exceeded. The heater is dried when the supply voltage is reduced, completely protecting it from burning out. The mould temperature controller is equipped with six heating zones with a 16 A load per zone, making it possible to process any type of plastic. Technical specifications of the ELWIK RT-C ...

Тype: FESSMANN AUTOVENT - 1 trolley Cooking: steam low pressure 0,5 – 1,0 bar , by steam jets and high spraying rate in to the AUTOVENT Connected load for Low Pressure steam 0,5 Bar; 45 kW; 70 Kg/ h Control panel: MC 3.1 Base width: 151 сm Base depth: 127 сm Height corpus: 250 сm Min. room height: 293 сm Recommended room height: 293 сm Trolley dimentions (HxBxT), сm: 198х104х102

Key data: 16230

16MW MAN TURBO back pressure turbine for sale. Model: MARC4 B-00 Year: 2008 Hours: 60,145 Capacity: 16,230 kW Hz: 50 Scope of supply: Steam turbine, Gearbox, Generator, Lubrication oil system, Control oil system, Instrumentation and control system. General Information The turbine is well preserved. Additional info: Steam and cooling system piping not included. Service History Status: All required maintenance carried out in compliance with the operating manuals. There is a leaking sealing at the connection. Cost of repair is estimated to be below €50,000. No further defects are known at this moment. The last revision planned in 2018 was not carried out due to decommissioning. Most likely it will need a major overhaul. Available for Sale. Price: Please apply

Type: FESSMANN T 3000 3 trolleys Heating: steam Control panel: DP 11 Base width: 151 cm Base depth: 347 cm Corpus height: 250 cm Min. room height: 304 cm Recommended room height: 320 cm Smoke-trolley dimensions (HxWxD), cm: 198x104x102 Connected load for HP heating: 111 kW Smoke generator: RZ 550 Machine width: 55,0 cm Machine length: 115,0 cm Machine height: 159,0cm Rated power: 1,8 kW

Type: FESSMANN T 3000 3 trolleys Heating: steam Control panel: DP 11 Base width: 151 cm Base depth: 347 cm Corpus height: 250 cm Min. room height: 304 cm Recommended room height: 320 cm Smoke-trolley dimensions (HxWxD), cm: 198x104x102 Connected load for HP heating: 111 kW Smoke generator: RZ 550 Machine width: 55,0 cm Machine length: 115,0 cm Machine height: 159,0cm Rated power: 1,8 kW

Double finisher 842 Multimatic with control year 08/2014, NP 20110 € Wardrobe former and trouser topper rotatable on one column Finishing process in closed cabin Integrated cabin extraction automatically controlled Doors close automatically Flexible processing of different wardrobes and sizes Computer control with nine freely programmable memory slots Air volume regulation for particularly sensitive wardrobe space-saving and almost no loads in the working area due to finishing process extraneous steam heated or fully electric with built-in electric steam generator Are you looking for an all-rounder for jackets & Co? - Multimatic Double Finisher 842 With the Multimatic double finisher 842, jackets, jackets, coats, trousers and the like can be finished automatically. It consists of a shape finisher and a trouser topper. The two devices are rotatable attached to a column. ...

Double finisher 842 Multimatic with control year 09.2006, Np 20110 € Wardrobe former and trouser topper rotatable on one column Finishing process in closed cabin Integrated cabin extraction automatically controlled Doors close automatically Flexible processing of different wardrobes and sizes Computer control with nine freely programmable memory slots Air volume regulation for particularly sensitive wardrobe space-saving and almost no loads in the working area due to finishing process extraneous steam heated or fully electric with built-in electric steam generator Are you looking for an all-rounder for jackets & Co? - Multimatic Double Finisher 842 With the Multimatic double finisher 842, jackets, jackets, coats, trousers and the like can be finished automatically. It consists of a shape finisher and a trouser topper. The two devices are rotatable attached to a column. ...

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K (refurbished in 2003) Thermoformer with auto-start facility Indramat Servomotor Indexing Top & Lower heaters Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Optimised Schleicher (PLC) Controls Auto Lubrication Pump. Inline ILLIG ÜG70B Counter/ Stacker, with delivery conveyor Inline Grinder & Blower

GE LM2500+ For Sale (31.3 MW, 50 Hz): GE LM2500+ natural gas-fired and associated Aalborg HRSG. The GE LM2500+ has a nominal output of 30 MW. The OCGT originally produced steam for local combined heat and power (CHP”) demand, which no longer exists. Due to this, the HRSG is kept in dry preservation and the OCGT operates using the bypass stack, providing black start and short-term operating reserve capability. Open cycle GE LM2500+ GT driving a 36 MVA generator, which is a totally enclosed air-cooled (TEAC”) design rated at 11 kV. The boiler on this unit is currently in dry preservation. The LM2500+, a design based on the very successful heritage of the LM2500 gas turbine, rolled off the production line in December 1996. The LM2500+ was originally rated at 27.6 MW, for a nominal 37.5 percent thermal efficiency at ISO, no losses and 50 Hz. Since that time, its rating has continually  ...

Stephan TC300 Combicut Machine for cooking, dispersing, mixing dips, sauces, dressing, cream, cheese products, cream cheese, cream cheese, etc.! Machine completely made of stainless steel Electronic control Siemens Main motor 3 speeds, incl. vacuum system, incl. water dosing system with meter, Dosing device with weighing system for weighing the aggregates, direct steam injection, steam filter cleaner station Complete work platform Further information on request Machine is offered as is! A complete overhaul/refurbish by us is possible for an extra charge Stephan TC300 Combicut Machine for cooking, dispersing, mixing dips, sauces, dressing, cream, cheese products, cream cheese, etc! Machine made entirely of stainless steel Electronic control system Siemens Main motor 3 speeds, incl. vacuum system, incl. water dosing system with counter, Dosing device with weighing syste ...

- High pressure cleaner PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam similar but no Dynajet, Oertzen, Falch, - Cold water / hot water / steam 32 bar to 140°C / high pressure steam 150 or 200 bar to 150°C for cleaning and disinfection The following models are available: - TORPEDO MINI-E 3.8 M 230Volt/50Hz Powersteam 8 l/min. at 150 bar - TORPEDO MINI-E 5.8 T 400Volt/50Hz Powersteam 8 l/min. at 200 bar - Dimensions and weight: 110x64x98cm, approx. 150kg - incl. 10 m high-pressure hose, spray gun, lance and flat jet dues 25°

Used Stephan Combicut TC300SK Specific for process cheese/melt cheese Main Features: WORKING PRESSURE / TEMPERATURE: 0.5 BAR / 95°C - 115 °C EXECUTION ORIGINAL STEPHAN UNDERFRAM – COMPLETE STAINLESS STEEL PROCESSING DRUM – STAINLESS STEEL CHARGING SLIDE – STAINLESS STEEL CHARGING HOPPER – STAINLESS STEEL DISCHARGING VALVE – STAINLESS STEEL CHARGING VALVES FOR BOTTEROEL OR OTHER LIQUIDE PRODUCT – STAINLESS STEEL MAIN ENGINE 2 SPEED: 60KW (1500/3000RPM.) MAIN MOTOR SEALING - WATER COOLED WORKING TOOLS MAIN MOTOR: 3 KNIVES GEAR MOTOR SEALING - WATER COOLED WORKING TOOLS GEAR MOTOR: 7.5KW MIXING ARM WITH WALL AND COVER SCRAPER COMPLETE VACUUM POMP SYSTEM VACUUM DOM FOR COOLING AND DEHYDRATION – STAINLESS STEEL ELECTRONIC CABINET – STAINLESS STEEL PLC CONTROLL UNIT SYSTEM WITH DISPLAY (NEW SIEMENS S7 ) SAFETY CO ...

Stephan TC300 Combicut Machine for cooking, dispersing, mixing dips, sauces, dressing, cream, cheese products, cream cheese, cream cheese, etc.! Machine completely made of stainless steel Electronic control Siemens Main motor 3 speeds, incl. vacuum system, incl. water dosing system with meter, Dosing device with weighing system for weighing the aggregates, direct steam injection, steam filter cleaner station Complete work platform Further information on request Machine is offered as is! A complete overhaul/refurbish by us is possible for an extra charge Contact: 01722894884 infoweyrauch-maschinen.com Stephan TC300 Combicut Machine for cooking, dispersing, mixing dips, sauces, dressing, cream, cheese products, cream cheese, etc! Machine made entirely of stainless steel Electronic control system Siemens Main motor 3 speeds, incl. vacuum system, incl. water dosing syst ...

T9 - used approx. 20 m³ / 20,000 ltr steel tank with coated inside, standing upright. technical details: capacity: approx. 20 m³ / 20,000 litres material: steel tank with inner coating dimensions: Ø approx. 2.55 m × total height approx. 5.70 m Used steel tank with inner coating, professionally cleaned and in good condition. Standing, above-ground storage tank on 4 steel feet, lid on top of the roof and down at the tank bottom, several inlets and outlets. Steel rack and matching ladder available at an additional cost. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertise ...

Used sugar agglomeration line made by Olhmann. New 1996. Capacity ca. 600 kg of agglomerated sugar per shift. One batch = 100 kg and lasts 40 minutes. Short operating principle: ground sugar is thrown inside the agglomerator, at the bottom there is a sieve through which hot air from the steam exchanger throws the product upwards, which with the sprayed water causes the formation of very fine balls. The line requires process steam, an input of 8 bar.

Stephan TC300 Combicut Multifunctional, horizontal machine for cooking, melting, with a vacuum system. This machine is suitable for: dispersing, mixing dips, sauces, dressings, creams, processed cheese products, cream cheese products, cream cheese, etc.! Drum capacity 300 mmr., working temperature max. 105°C, working pressure -1.0 to 1.0bar This machine has previously worked in a processed cheese plant for the production of processed cheese products The machine is completely made of stainless steel, the base is made of stainless steel, original by Stephan New electronic control Siemens S7 - with display Main motor frequency controlled 0-3000 rpm, 3 homogenization meters Main shaft seal: Water cooled Integrated heat exchange system Transport wing with scraper on lid and drum vacuum system, Water dosing system with meter, Direct steam injection, Temperature monitoring by a p ...

750 MW each, UNUSED Gas Based Complete Combined Cycle Power Plants 2 units available Technical Specifications: The Project Details: 1. EACH module has two Gas turbines GE 9FA.03 (DLN2+) and one Steam turbine GE D11. Each GT exhaust is directed to the triple pressure unfired, natural circulation horizontal, type CMI USA HRSG. This configuration helps turndown operation of station up to 45%. 2. The Station is based on robust design of GE Gas Turbine with high efficiency DLN2+ Dry low Nox system, each GT is site rated for an output of 235 MW and the triple pressure reheat GE D11 Steam Turbine with downstream Exhaust, is site rated at 266 MW. The HRSG is a Triple pressure, Natural circulation, Horizontal design type with Deaerator atop the LP drum. Thus Net Combined cycle efficiency at Site condition is approx 57% on LHV basis. The inherent design of the gas turbine reduced the N ...

Kitzinger Contino 500 continuous washer, built in 2013, for boxes, pallets, etc. Specifications: Manufacturer: Kitzinger Year of construction: 2013 Suitable for pallets up to 1200x800mm Runway: 4000mm Running-in: 1500mm throughput height: 310mm throughput width: 860mm Volume wash tank: 700 liters Rinse: approx. 250-300 litres/hour Pump capacity: 11kW (1500 l/min; 3 bar +/- 0.5 bar) Gearbox: Drive 0,37kW; Hold-down: 0,12kW Heating capacity: 3x11kW electric flange heater Rinse boiler: 11kW electric flange heater (expandable) Weight: 1800kg without water Connected load: approx. 55kW; 400V 50Hz; 100 A fuse Complete documentation is available.

harden furnace 1200 0.6x0.6x1.0m temperature 100 - 1200 Celsius possible various size Industrieöfen Neubauten Industrieöfen gebraucht Plasmanitrieranlagen Drehherdöfen Drehtrommelöfen Durchlauföfen Herdwagenöfen Induktionshärteanlagen Kammeröfen Ofenanlagen Schachtöfen Vakuumöfen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Ha ...

Magister ES100 ES100/2 Stilo L espresso machine Automatic electronic espresso coffee machine with programmable dosage. Cladding made of or mirror-like stainless steel Built-in volumetric pump with balanced by-pass Electronic monitoring of boiler level Coffee dispensing is done by switch with volumetric dosing (0-3000cc) with 4 cans per group and knob for continuous dispensing A hot water sprayer with automatic programmable dosing as standard Electric heating with safety thermostat Dimensions approx: 795x535x500h Boiler 11 liters Steam taps: 2 Power 4500 Watt Voltage 220/240V Single phase More items - new and used - can be found in our shop! International shipping costs on request!

oven 1100 1.5x1.5x2m t max 1150 150kw auto door auto bogie PLC Haubenofen Schachtofen Sonderanlagen Härt en GlühenNormalisieren Weichglühen Isothermglühen Vergüten Anlassen Entspannen Hubschritt-Kettenförderofen Ringherdofen Kammerofen Durchstoßofen Drehherdofen buerstlein Rollenherdofen Gußplattenbandofen Reinigungsanlagen Schutzgaserzeuger Ofenanlagen zum Homogenisieren von Aluminium Kammerofen zum Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Fore ...