steam boiler 4 used for sale

Composite systems Bitzer with original capacitors Deep pond / Normal cooling -3x compressor Bitzer 4JE-13Y-40P -Kaeltepower: 60 kW at -10ºC/40ºC, 26 kW at -25ºC/40ºC -Volume: 3 x 63.5 m3/h -Quantity in stock: 1 piece -Kealtemittel: R134 -With original capacitors -In very good condition Price on request, We have many other cold machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Offer 23426 Specifications: - Cutting range at 90° around 420 mm - flat 635 x 290 mm - Cutting range 45° round 360 mm - flat 420 x 300 mm - Saw blade dimensions 5200 x 32 x 1.1 mm - Stepless cutting speeds 18 to 108 m/min - Hydr. Raising + lowering the saw frame - Hydr. Material vise - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 2.2 kW - Coolant device - Machine is mounted on bogie - Feed roller conveyor mot. driven 4000 mm - Discharge roller conveyor with dimension stop 6000 mm - Space requirement approx. W 2500 x H 1400 x D 1100 mm - Weight machine approx. 950 kg - Weight roller conveyors 2000 kg

We sell a baguette system of the company JAC type BA 402 incl. baguette long scooter. Used and refurbished.

Reference Num.: 3657 Brand: Beil Type: 780/425-S-H-AP Construction year: 1999 Available: directly Status: Not in production Location: Deutschland

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 8mm total power requirement: 15 kW weight of the machine ca.: 14,1 t dimensions of the machine ca.: 6310 x 1660 x 1590mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Leroy Somer LSA 461 M3 - Used - 150 kVa - Generator End

Complete processing cell with robot and ..., IRB 4400/45kg, ABB, used Top Special price ! This system is sold for an absolute special price of only 8% of the purchase price. If you have a VAT number, we will gladly issue an invoice without VAT. Used, top condition. Due to a series end, this processing cell is free and sold. The machine will be checked by us and can be tested by us before a possible purchase. The robot was regularly serviced by ABB and had an easy process step to complete. We cannot accept any further warranty. Complete deburring cell from Protex: A workpiece is placed in the processing shaft from the outside. The part is clamped onto the fixture. The robot picks the correct tool from the tool storage location and begins processing. The built-in swivelling table can be used to rotate the workpiece and carry out a further machining step. The chips fall into a  ...

Robot with controller and accessories, IRB 4400/45, ABB, used Top Special price ! This robot is sold for an absolute special price. If you have a VAT number, we will gladly issue an invoice without VAT. Used, top condition. Due to a series end, this robot is free and sold. The machine will be checked by us and can be tested by us before a possible purchase. The robot was regularly serviced by ABB and had an easy process step to complete. We cannot accept any further warranty. The system consists of: 1) Robot, ABB, IRB 4400/45 Type B M2000 Foundry version, 6 axes 2) Robot controller, ABB, type S4Cplus, 3) Schunk quick-change system SWK 040, 1x male 2x female 4) Control cabinet with 2 SCA-B4-70 10, E Motion servo amplifiers on the robot 5) All robot cables 8m and cabling of all devices with industrial plugs

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 13mm total power requirement: 22 kW weight of the machine ca.: 21,3 t dimensions of the machine ca.: 6560 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 16 total power requirement: 37 kW weight of the machine ca.: 23,81 t dimensions of the machine ca.: 6560 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1000 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 ja ...

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1000 mm turning dia. in gap: 690 mm spindle bore: 58 mm spindle turning speed range: 25-2000 U/min feeds - longitudinal: 0,031-1,7 mm/U voltage: 400 V / 50 Hz total power requirement: 5,5 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2,3 x 1,0 x 1,5 m • with 3- and 4- jaw chuck, • 2 axis-digital display NEWALL, • fixed and live steady, • Machine light. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Part Number: 7687 SPECIFICATIONS - inlet width 540mm - inlet height 300mm - shaft width 630mm - shaft diameter 700mm - knife length 630mm - number of knives 2pcs - sieve dimensions 40x40mm - toothed pulling shaft at the bottom - lower shaft motor 4kW - toothed pulling shaft from above - upper shaft motor 4kW - belt feeder - length of the feeding belt 4720mm - width of the feeding belt 500mm - main motor 75kW - Autoewers (adjustable) - total dimensions of the machine length/width/height 3100x2000x1830mm - total dimensions of the feeder length/width/height 4800x780x980mm - weight about 5000kg ADVANTAGES – made in Germany – autorewers – used chipper, very good condition Net price: 120900 PLN Net price: 28447 EUR depending on the price of 4.25 EUR (Prices may change with higher fluctuations)

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1500 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 ja ...

saw blade diameter: 400 x 50 mm cutting diameter: 130 mm turning speeds: 3000 U/min reus: variabel einstellbar U/min capacity 90 degrees: round: 130 mm capacity 45 degrees: round: 115 mm capacity 90 degrees: square: 110 x 110 mm capacity 45 degrees: square: 100 x 100 mm capacity 90 degrees: flat: 250 x 85 mm capacity 45 degrees: flat: 160 x 70 mm voltage: 400 V / 50 Hz total power requirement: 3 kW weight of the machine ca.: 380 Kg dimensions of the machine ca.: 0,8 x 0,7 x 1,3 m • Cold circular saw for aluminium, • with pneumatical double clamping of the workpiece, • clamping is adjustable horizontally and vertically, • equipped with mist lubrication, • adjustable saw blade feed, • additional roller conveyor: Height = 850 - 1200 mm, Width = 250 mm, Length = 1000 mm, with 4 posts, Price: € 290.00 The data for this ad was created with ModulMWS - the software solution of  ...

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 2000 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 ja ...

The machine is in good technical condition, a test run is possible by prior arrangement. OKUMA 5-axis vertical machining center MU-400VII with OSP-P300M-H – Tool magazine for 48 tools, BT40 (or Big Plus) – Tool breakage detection incl. automatic length measurement – Preparation for the function of automatic zero point shift (incl. software) – Collision avoidance system for 4-/5-axis milling centers – Coolant pump 0.8 kW instead of the standard version 0.25 kW – Flush cooling – Function for automatic zero point displacement incl. workpiece measurement, Renishaw OMP60 probe – Cutting edge control for 5-axis machining – Super NURBS Type A for 5-axis centers –Conveyor

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1000 mm spindle bore: 58 mm turning dia. in gap: 690 mm spindle taper: Größe 6, DIN 55029 spindle turning speed - stepless: 30 - 2000 U/min feeds - longitudinal: 0,031 - 1,7 mm/U thread - mm pitch: 0,1 - 14 mm thread - inch: 2 - 112 Gang / inch. tailstock quill diameter: 60 mm tailstock quill taper metric: MT 4 tailstock quill stroke: 120 mm max. workpiece weight between centres: 500 kg voltage: 400 V / 50 Hz spindle motor: 5,5 kW total power requirement: 6 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2,9 x 1,2 x 1,5 m • stepless adjustable turning speed via frequency converter, digital display, 2-axe-DRO, Made:NEWALL The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

axis stroke (X,Y,Z): 3950,2145,555 mm Number of spindle head vertical: 13 St. Number of spindles head horizontal: 6 St. Number of tools: 22 St. Number of milling agregates: 1 St. working dimensions: 3200x2000x200 mm Motor output: 12 kW Control: Beckhoff CNC Number of axles: 5 St. Masterwood Project 385 CNC-Bearbeitungszentrum --------------------------------------------- 5-Achs CNC-Bearbeitungszentrum in Auslegerbauweise (dadurch sehr große PLatten auflegbar) für Innenausbau, Plattenbearbeitungen aller Art. Kurze Zusammenfassung: --------------------------------------------- Verfahrwege X = 3950 mm, Y = 2145 mm, Z = 555 mm Arbeitsbereich: X = 3200 mm, Y = 2000 mm, Z = 200 mm 1 Stk. 5-Achs-Hochleistungsspindel, 12 kW, mit HSK 63 F Aufnahme 1 Stk. fest installierter Bohrkopf mit 19 Spindeln mit 7 einzeln abrufbaren Vertikalbohrspindeln X-Richtung mit 6 einzeln abrufbaren Vertikalbohrspin ...

Aircooled chiller/Heat pump EMICON PAE 4902 S KC 488 kW / 570 kW Cooling capacity: 488 kW / 138.76 tons (12/7 — 35°C) Heating capacity: 570 kW / 162.08 tons (40/45 —7°C) Year of manufacture: 2013 Options: Heat pump. Hydraulic module. Recuperation. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 3 pcs. Copeland ZP385KCE-TWD 522 (scroll) + 1 pcs. Bitzer GSD80385VAB4-2 (scroll) + 2 pcs. Bitzer GSD80295VAB431 (scroll) Type of refrigerant: R410a Number of fans: 8 pcs. (EC-fans) Hydraulic module: 2 pcs. water pump Wilo DL80/160-11/2, expansion vessel. + 1 pcs. water pump Wilo IPL65/170-1.1/4 (Recuperation) Dimensions: 4.85x2.3x2.56 m Weight: 4495 kg Condition: Good

closing pressure: 4360 kN table-size: 730 x 730 mm control: B+R Industrieelektronik draw back pressure: 190 kN ajustment speed: max. 60 mm/sec return speed: max. 90 mm/sec daylight between the columns: 900 mm = vulcanizing press with vertical closing unit, with form removal and form separation device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 400 t stroke: 300 mm table surface area: 1200 x 700 mm ram surface: 1200 x 700 mm dayligth: 500 mm adjustment of stroke: 300 mm return capacity: 348 kN capacity of ejector: 100 kN ejector stroke: 100 mm total power requirement: 65 kW weight of the machine ca.: 28 t dimensions of machine L x W x H: 4,4 x 2,75 x 4,0 m = Frame press Accessories: tool changing table - next safety inspection according to stamp 05/2021 - - with cutting shock absorption damping force 4000 kN damping stroke 5 mm spindle adjustment 200 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1000 mm table width: 1000 mm table load: 1,5 t flange diameter: 700 mm turning speed: max. 0,04 U/min weight of the machine ca.: 1,2 t dimensions of machine L x W x H: 1,60 x 2,0 x 1,50 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 450 mm y-travel: 400 mm z-travel: 320 mm tool taper: HSK 63 spindle turning speed range: 0 - 10000 U/min rapid traverse: 30 m/min System for processing fittings, valve housings, etc. consisting of 1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 1-0 / 1-V, YOM 2010, with 2 pcs. 3-axis machining modules, each with 8-pos. tool turret, travel paths module 1: X1 / Y1 / Z1 = 450/400/320 mm, travel paths module 2: X2 / Y2 / Z2 = 450/400/320 mm, tool fixture HSK 63, rotary table with 2 integrated workpiece carriers á 400 mmø (B axis per workpiece carrier 360 x 1 °), coolant through spindle Acc.: chip conveyor, coolant device connected by ABB handling robot with 1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 2-0 / 1-V, YOM 2003, with 3 pcs. 3-axis machining modules, each with 8-po ...

ZASO MSA-4PS beam welding line was built in 2009 in Poland by ZASO Polski Sprzęt Spawalniczy. The machine enables precise longitudinal welding of, among others, plate girders, T-beams, I-beams and H-beams, using the MIG/MAG or SAW method. The applied technical solutions fully automate the process, with the guarantee of obtaining the highest quality welds. The machining process is performed by two torches with integrated correction slides, which allow them to be moved remotely in two axes. A special frame clamp system holds the welded parts throughout the process, without the need for preassembly or the use of special tooling. The overriding control system also synchronises the work travel with the welding power sources. The ZASO automatic welding machine is also distinguished by its modular work table, consisting of up to five modules, each 6 m long. It has an integrated cooling s ...

This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: Premus Precitool Type: Preciset 420 Measuring range X: 420 mm Measuring range Z: 420 mm Pressure: 6-8 bar Frequency: 50/60 Hz Power: 600 VA Voltage: 100-120 V~ / 200-240 V~ Weight: ~120 kg Accessories: Data clips incl. coding section zidCode Scanner All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the Seller's duties or to any injury to life, limb and health. Further legal Information can be found on the website of Witzenmann GmbH under the keywords "Imprint", "Terms and Conditions" and "Data Protection".

measuring range X-axis: 540 mm measuring range Z-axis: 400 mm table diameter: 740 mm enlargement: 20fach range L-W-H: ca. 1,70 x 1,00 x 1,70 mm weight: ca. 600 kg acc.: DRO on 2 axis The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 400 mm roll length: 1000 mm rolls drilled: peripher Nip adjustment: hydraulisch total power requirement: 2x 30 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mm turning diameter over slide rest: 235 mm turning length: 1000 mm turning dia. in gap: 560 mm spindle bore: 52 mm spindle taper: Größe 6, DIN 55029 spindle turning speed - stepless: 18 - 2120 U/min feeds - longitudinal: 0,015 - 0,6 mm/U face feeds: 0,0075 - 0,3 thread - mm pitch: 0.25 - 7,5 mm thread - inch: 4 - 120 Gang / inch. tailstock quill diameter: 50 mm tailstock quill taper metric: MT 4 tailstock quill stroke: 120 mm max. workpiece weight between centres: 500 kg voltage: 400 V / 50 Hz spindle motor: 5,5 kW total power requirement: 7,5 kW weight of the machine ca.: 1,85 t dimensions of the machine ca.: 2,9 x 1,2 x 1,5 m • stepless adjustable turning speed via frequency converter, digital display, 2-axe-DRO, Made:NEWALL The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The new powerful dry-running pumps: The ADH series is specially designed for solar developed for the demanding processes of the semiconductor and LED markets, With a suction capacity of 600-4500 m3/h. Semiconductors: High H2 pumping rate The performance of the ADH series brings the following advantages to the process: -ADL process performance: high pumping efficiency of light gases enables faster chamber emptying between process steps - Epitaxy and EUV: high pumping speed and high flow rate Tolerance meets the most demanding process specifications Adixen AD30K dry pump, high vacuum, AD 30 KL Manufacturer: Alcatel Adixen Type: AD30K.H Year of manufacture: 2008 Adixen AD100K.H Manufacturer: Alcatel Adixen Type: AD100K.H Year of manufacture: 2008 Vacuum pump: Manufacturer: AERZEN Type: GM 2000 CM-C Speed: 6000 rpm Voltage: 200-460 V Frequency (mineral oil/PFPE ...

Material conveyor belt LT-400 | Inclined conveyor belt for waste loading and material feeding for granulators and other applications. Movable, very stable design, height-adjustable at the outlet. Working width: 400 mm Working length: 3000 mm Working speed: 15 m/min. Maximum head: 1950 mm Gearbox: Bonfiglioli 0,55 kWt Weight: 250 kg

PVC Compounding Plant, Hot/Cooling Mixer A hot/cooling mixing system including accessories must be handed in. The control system (PLC) is outdated and needs to be reinstalled. The system is still installed and must be handed in from the site. Hot mixer: Henschel Fluidizing Mixer FM 1500 A Engine power: 180/280 kW, 2-speed 750/1500 rpm Külmischer: Henschel Cooling Mixer KMH 4500 Double jacket, 6 mixing tools, 77 rpm Motor power 55 kW Accessories: - Liquid scale 25 kg - Liquid scale 250 kg - Weighing container for powdered media 650 kg - Conveyor belt for bag addition - Feeding station for big bag with discharge aid and rotary valve (Not shown on P&I) - Weighing container for plastic recyclate 600 kg - Transmitter and buffer tank for discharge from cooling mixer - Kaeser EB 420 C suction blower - Suction blower (blue)

cutting diameter: 460 mm saw band length: 5200 x 41 x 1,3 mm cutting width: 460 mm cutting capacity - flat: 470 x 460 / 90° mm cutting capacity - round: 460 / 90° mm speed: 20 - 100 m/min voltage: 400 V / 50 Hz sawing motor: 4 kW total power requirement: 4,7 kW weight of the machine ca.: 1,665 t dimensions of the machine ca.: 2100 x 1300 x 850 m full-automatical band saw, Accessories: • Inverter for controllable speed, • automatical stop function after sawing and on breakage of the saw blade, • automatical saw arm lifting, • hydro-mechanical clamping of the saw blade, • material clamping to be effected from above, hydraulical vice, • switch for cutting pressure control, • coolant pump, • roller conveyor, length: 1.2 m. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 105 mm x-travel: 1200 mm y-travel: 1000 mm z-travel: 325 mm adjustment of cross-rail: 785 mm distance between columns: 1600 mm distance spindle - column min./max.: 215 / 1100 mm spindle feeds - stepless: 1 - 6000 mm/min spindle taper: ISO 40 spindle turning speed - stepless: 40 - 1800 U/min table surface area: 900 x 1500 mm workpiece weight: 2000 kg spindle drive: 5 kW total power requirement: KVA weight of the machine ca.: 6 t dimensions of the machine ca.: 3,3 x 3,0 x 2,8 m dimensions of the machine ca.: 3,3 x 3,0 x 2,9 m • with RENISHAW -detector OMP 40, • mechanical refurbishing and new control HEIDENHAIN TNC 410 in year 2002 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working length: mm Working width: mm Working height: mm TGT Robby 420 universal, the glass mounting device for working without Effort The TGT Robby 420 420 universal is battery powered and its Telescoping movements, crane arm forward (work 1,25 m in front of the wheels), adjust large discs sideways exactly (100 mm to the right 100 mm to the left), and the lift head to Tilt 60 ° and turn 180 ° upwards, are using a Cable remote control made. Equipped with an Accusauganlage carrying capacity approximately 500 kg the TGT Robby 420 universal is the safe response aid. Of course, the lift head can also be rotated 360 ° manually. moreover The lift head can be equipped with an articulated joint (Turn the disc completely sideways) to drive through narrow doors to be able to. The TGT Robby 420 universal is also with a strong front-wheel drive equipped, so the effor ...

capacity 90 degrees: round: 350 mm capacity 90 degrees: square: 330 mm : 450x320 saw band length: 4250x34x1,1 mm band speed: 40 + 80 m/min table height: 845 mm saw band width: 34 mm total power requirement: 2,2 kW weight of the machine ca.: 0,985 t dimensions of the machine ca.: 1,4 x 2,0 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 460 mm : 460 mm : 460 x 460 mm saw band length: 5450 x 41 x 1,3 mm table height: 800 mm band speed: 20 - 100 m/min total power requirement: 5,5 kW weight of the machine ca.: 3,2 t dimensions: 2,675x 2,15 x 2,05 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mm capacity 90 degrees: round: 110 mm capacity 90 degrees: square: 100 mm capacity 90 degrees: flat: 200x60 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: square: 100 mm capacity 45 degrees: square: 140x60 mm total power requirement: 1,5 kW weight of the machine ca.: 130 t dimensions: 0,8 x 0,7 x 1,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MORI SEIKI SH-400 Horizontal Machining Center was manufactured in 2000 in Japan by Mori Seiki CO., LTD. The CNC milling machine is equipped with Mori Seiki MSC-501 numerical control. The price of the machine includes various types of frames. Technical data of the MORI SEIKI SH-400 CNC milling machine - CNC control: MORI SEIKI MSC-501 - machine weight: 10100 kg

clamping force: -- kN injection volume: 230 cm³ screw diameter: 40 mm platen size: 475 x 475 mm Condition: used, Specification: Horizontal injection moulding machine, injection unit: - Screw diameter: 40 mm - Cylinder diameter: 40 mm - Spraying volume: 230 cm³. Clamping unit: - tie bar distance: 475 x 475 mm - Operating hours approx.: 30000 h - Air valve - Core pull - 12-way hot runner controller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

11 KW

Key data: 30 , 13 , 206

Compresseur WORTHINGTON CREYSSENSAC type Rollair 4000 Compresseur à entrainement direct en bon état

clamping force: 4200 kN injection volume: 572 - 1716 cm³ screw diameter: 90 mm platen size: 1040 x 1040 mm closing stroke: 620 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 400 mm roll length: 1100 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch total power requirement: 2x 30 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cross-section width:: 5 Schläuche 3-5 mm cross-section heigth:: 3 - 20 mm feed:: 1,5 - 50 mm Condition: used, very good condition only approx. 1 year in production Specification: circular knife cutting machine for slices and rings - small cutting machine with high-speed rotating circular knife - feed and knife movement, pneumatic - Tube or strand diameter min.: 3 mm - Tube or strand diameter min.: 20 mm - Feed (ring or strand length): 1.5 - 50 mm - Output depending on material max.: 60 strokes/min - Optionally, the following can be cut 5 tubes or strands: diameter 3 mm to 5 mm 4 tubes or strands: diameter 5 mm to 7 mm 3 hoses or strands: diameter 7 mm to 12 mm 2 hoses or strands: diameter 12 mm to 15 mm 1 hose or string: diameter 15 mm to 20 mm - Power requirement approx.: 0.37 kW - Air supply min.:  ...

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 24mm total power requirement: 45+22 kW weight of the machine ca.: 43 t dimensions of the machine ca.: 6684 x 2280 x 2375mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 48 KW, 60 kVA, 400 V

On hand Perkins Engine Stamford Alternator ComAp Control ABB Disconnect Switches Generator Set Specifications: Model No.: EQ-P6048 Continuous power (Prime Rating): 60 kVA / 48 kW Emergency power (standby rating): 66 kVA / 53 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine Brand: Perkins Engine Model: 1103A-33TG2 Bore x Stroke (mm): 105 x 127 Displacement (L): 3.3 Compression ratio: 17.3:1 Intake system: turbocharging & intercooler Fuel System: In-line Injection Regulator Type: Mechanical Dimensions of the generator set: Length: 2220 mm Width: 960 mm Height: 1258 mm Weight (open): 1085 kg Standard: 4-stroke, 1500 rpm, water-cooled robust diesel engine Leroy Somer Generator ABB Circuit Breakers Protection system in manual operation Flexible oil hoses and oil drain valve Preheater Lubricating oil and antifr ...

Technical data for the shelving system: Shelving system: META Type: CLIP Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 1,100 mm Number of fields per row of shelves: 01 pcs. Number of grating shelves: 06 pcs per field The scope of delivery includes: 02x Shelf stand, used Material color: blue Frame profile dimensions: 50 x 40 x 1 mm Adjustment grid: 25|25 mm incl. base plates and gravel bar The stands are pre-assembled 2,490 mm high 435 mm deep 06x Shelves, used Soil name: V100 Material colour: creamy white Dimensions: 1,000 x 400 x 40 mm Weight: 2.78 kg|pcs. max. load per shelf 100 kg with evenly distributed load 04x Levelling plates, used Dimensions: 76 x 58 x 2 mm Weight|Pcs: 0,064 kg Material colour: sendzimir galvanised 24x Shelf Racks, used Weight|pcs.: approx. 0,014 kg Material colour: sendzimir galvanis ...

Technical data for the shelving system: Shelving system: META Type: CLIP Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 2,150 mm Number of fields per row of shelves: 01 pcs. Number of grating shelves: 06 pcs per field The scope of delivery includes: 03x Shelf stand, used Material color: blue Frame profile dimensions: 50 x 40 x 1 mm Adjustment grid: 25|25 mm incl. base plates and gravel bar The stands are pre-assembled 2,490 mm high 435 mm deep 12x shelves, used Soil name: V100 Material colour: creamy white Dimensions: 1,000 x 400 x 40 mm Weight: 2.78 kg|pcs. max. load per shelf 100 kg with evenly distributed load 06x Compensating plates, used Dimensions: 76 x 58 x 2 mm Weight|Pcs: 0,064 kg Material colour: sendzimir galvanised 48x Shelf Racks, used Weight|pcs.: approx. 0,014 kg Material colour: sendzimir galva ...