stationary used for sale

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Volvo Engine: TAD841GE Engine No.: 3008598229 Power: 254 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford Generator type: UCDI274K Gene. No.: N22E211704 Generator power: 250 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 1,200 mm Height approx. mm: 2.291 mm Length app ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Iveco FPT Engine: C13TE2F Engine No.: 284948 Power: 377 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: S 4 L 1 D - F 41 Gene. No.: N 22J425396 Generator power: 400 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Manual & remote start Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 600 Dimensions of the power unit: Width approx. mm: 1.620 Height approx. mm: 2.295 L ...

- Mixing pipe mixture line MWM 12301281 - References: 12300476 ; 12300650 - Suitable for several motors - Please note! Price per piece! - 12301281 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new proje ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Scania Engine: DC13-71A(02-01) - Stage 3A Engine No.: 7395788 Power: 315 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Mecc Alte Generator type: ECO 38.2 L 4 C Gene. No.: P242434 Generator power: 350 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 740 Dimensions of the power unit: Width approx. mm: 1.800 Height approx. mm: 2.340 ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Scania Engine: DC 13 072 A 02 14 ECU Engine No.: in production Power: 440 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: HCI 544 C Gene. No.: in production Generator power: 500 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built-in Tank: Execution: Base frame tank with drip pan Content / liter: 800 Dimensions of the power unit: Width approx. mm: 1.600 Height approx. mm:  ...

- Cover Sealing Lid MWM 12325921 - Suitable for several motors - Please note! Price per piece! - 12325921 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating  ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Scania Engine: DC 16-320A Engine No.: in production Power: 481 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Diesel Technical data generator: Generator manufacturer: Stamford AvK Generator type: HCI 544 D Gene. No.: in production Generator power: 550 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 1.900 Height approx. mm: 2.550 Leng ...

Stationary universal shredder Komptech Crambo 3400, built in 2011, including hopper and elevation Manufacturer: Komptech Type: Crambo 3400 Year of construction: 2011 Hours: 3912 Propulsion: 160 kW Roller speed: max. 32 min-1 Roll length: 2820 mm Roller diameter: 610 mm Throughput: up to 45 t/h Strainer: 12.5 cm Dimensions: 5772 x 2949 x 3191 mm Weight: 19000 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment takes place ex works, without guarantee and guarantee.

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Volvo Penta Engine: TAD 1642 GE Engine No.: in production Power: 565 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: HCI 544 Gene. No.: in production Generator power: 600 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built-in Tank: Execution: Base frame tank with drip pan Content / liter: 800 Dimensions of the power unit: Width approx. mm: 1.700 Height approx. mm: 2.460 ...

- Air guidance air duct MWM 12136627 - Suitable for several motors - Please note! Price per piece! - References -> 12131031 – 12136628 – 12306646 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new pro ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: MTU Engine: 12 V 1600 G 10 F Engine No.: in production Power: 524 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Heating oil or diesel B7 Technical data generator: Generator manufacturer: A. van Kaick Generator type: synchronous with AVR Gene. No.: in production Generator power: 680 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power parallel operation Switch: Generator switch 4 poles Delivery: Built-in Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 1 ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: MTU Engine: 12 V 1600 G 20 F Engine No.: in production Power: 576 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: synchronous with AVR Gene. No.: in production Generator power: 680 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 1.850 Hei ...

Bizerba CWL Eco flex continuous scale with Sick VMS520 volumetric measuring system Bizerba CWL Eco flex Continuous Scale Dynamic weight detection with volume determination The CWL Eco flex can be integrated almost effortlessly into existing parcel shipping, sorting systems and feeding lines. Bizerba WM-CWL flex Continuous Scale Model: CWL Eco in Motion DE-09-MI006-PTB018 Max 60 kg Min 0.4 kg 230 V Sick VMS520 volume measurement system Features • Non-contact, active measuring method • Measuring the length, width and height of cuboid objects • Measure the length, width and height of objects with almost any shape • Works with a wide variety of surface structures and on different flat conveyor systems • Flexible system configurations • Calculation of the small-envelope cuboid (box volume) • Calculation of the real volume Device components Sick ...

Flow rate: 550 ltr./min Head/pressure: 30 m / 3.0 bar RPM: max 400 1/min KW / Voltage: 3,0 / 400 V Suction side / pressure side: DN 100 milk thread / DN 100 milk thread Type: Stationary on galvanized bearing block, pump head in stainless steel, for highly viscous liquids, built in 2017, L 1,180 mm, W 500 mm, H 720 mm Type: Spiral piston pump 07.014 Manuf.: Herold & Co. GmbH Product number: 2023001

- Air guidance air duct MWM 12131039 - Suitable for several motors - Please note! Price per piece! - References -> 12131070 – 12350043 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By cons ...

Edur multi-stage centrifugal pump, 15 cbm p.h., 7.5 bar, LBU404C120L Flow rate: 15 cbm/h Head/pressure: 75 m / 7.5 bar RPM: 2,900 KW / voltage: 4.4 / 400 V, motor 7.5 KW Suction side / discharge side: DN 65 flange 180 mm (flange with milk thread connection DN 65) / DN 40 flange 150 mm Type: Stationary, pump head in stainless steel, for liquids, Bauj. 2006 L 780 mm, W 290 mm, H 350 mm Type: LBU404C120L Manuf.: Edur-Pumpenfabrik Product number: 2023002

- Cover Lid MWM 12141950 - Suitable for several motors - Please note! Price per piece! - References -> 12141951 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integr ...

TECHNICAL SPECIFICATIONS Manufacturer: Förderanlagen-Maschinenbau Kanert Name: Conveyor belt Version: stationary Wheelbase: 20,000 mm Strap width: 650 mm Year of construction: 2015 Drive power: 11 kW Drive type: STIEBEL slip-on gearbox Support: free supporting structure Catwalk: single-sided Handover: baffle plate / synthetic Belt tension: Tension carriage Top chord cover: no Segment length: 1 x 2,000 mm / 1 x 8,000 mm / 1 x 13,000 mm SPECIFIC COMMENT - Very good technical condition

- Cover Lid MWM 12141938 - Suitable for several motors - Please note! Price per piece! - References -> 12141939 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integr ...

- Exhaust manifold exhaust manifold MWM 12300010 - Suitable for several motors - Please note! Price per piece! - References -> 12300011 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By consta ...

Made in Germany Saw blade size: 300 mm Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug.

- Bracket holder MWM 12420933 - Suitable for several motors - Please note! Price per piece! - References -> 12302372 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and i ...

Made in Germany Saw blade size: 300 mm Saw blade speeds: 40/80 rpm. Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug.

- Intake manifold air intake pipe MWM 12452139 - Suitable for several motors - Please note! Price per piece! - References -> 12452137 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constant ...

Stationary crane with pulverizer Brand pulverizer: KRUPP Electric water propulsion

Powerful double mitre saw, ideal for mass cuts of plastic and aluminium profiles at 90° or 45°. Saw blade diameter 550 mm, 4,500 mm length, and 1-axis control E 590/1. Proven elumatec principle of "sawing from below" for optimum accessibility and the best possible use of the saw blade. - Minimized calculation effort thanks to external dimension cut. - Pneumatic angle positioning 90° or 45". - Protective shields with automatic lowering over the sawing areas. - Standard with suction nozzle at the top and bottom. - Steel machine bed in post-and-beam construction. PC control E 590/1: - Industrial PC 1-axis control E590/1 for the cutting length (X-axis) - Drive-independent absolute measuring system - Pneumatic locking in position - Robust, low-wear direct drive of the mobile sawing unit - Ergonomic arrangement of the control unit - Positioning accuracy +/-0.1 mm pe ...

- Intake manifold air intake manifold MWM 12136619 - Suitable for several motors - Please note! Price per piece! - References -> 12136620 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By cons ...

- Flywheel 12140756 + Gear rim (verm. 12028066) MWM - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and pr ...

Overview The CIP system from Diversey is used for stationary cleaning of filling machines and processing equipment in the beverage industry. This unit was developed between 2015 and 2017 and is now for sale as the customer quit the purchasing contract. Therefore it was not in use. It is properly stored and can be installed and implemented into an existing circuit by Diversey technicians. Furthermore there is the possibility to adapt the P&ID to the customers needs. The CIP unit itself has no operator panel, as it will be implemented as slave system into the controle of a filling machine or other machine to be cleaned. It can be connected to an  Allen Bradley control system. It is installed in a stainless steel base frame and has a 500l tank. There are four pumps for the dosing of cleaning and disinfection media. Furthermore there is a heat exchanger heated by steam. In addition th ...

We have a revised 3412 integral motor unit available to be used as a generator or converted into a motorcycle pump. Manufacturer: CATERPILLAR Model: 3412 Arrangement: 2385363 Serial Number: 41202591 Power: 682 KW Type: Stationary Diesel Manufacture: 2004 Rated rotation: 1,800 RPM

- Cooling water line cooling water pipe MWM 12300128 - Suitable for several motors - Please note! Price per piece! - References -> 12300129 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By co ...

- Exhaust Branch 12300088 + Bracket 12300168 - Suitable for multiple motors! - Please note! Price per piece! - References -> The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapt ...

- Exhaust Branch Exhaust Nozzle MWM - Suitable for several motors - Please note! Price per piece! - probably 1230 0468 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting  ...

- Oil line MWM 12303498 - Suitable for several motors - Please note! Price per piece! - References -> 12303499 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integra ...

- Crankc. end cover MWM 12307982 - Suitable for several motors - Please note! Price per piece! - References -> 12307983 & 12027708 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly  ...

- Ganged Valve MWM 12301106 - Suitable for several motors - Please note! Price per piece! - 12301106 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new t ...

- Bracket MWM 12420190 - Suitable for several motors - Please note! Price per piece! - 12420190 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new techno ...

- Manifold MWM 12302114 - Suitable for several motors - Please note! Price per piece! - References -> 12302115 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integra ...

- Plug MWM 12302731 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and proc ...

- Cooling water line MWM 12300538 - Suitable for several motors - Please note! Price per piece! - References- > 12300535 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting a ...

- Bracket MWM 12302180 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and p ...

- Cooling water line MWM 12300048 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technol ...

Emergency power supply system as a 630 kVA diesel generator in a soundproofed container from a DATA Center with MTU 12 V 2000 engine Aggregate type: stationary Version: container Technical data engine: Engine manufacturer: MTU Engine type: 12 V 2000 Engine No.: 535102610 Engine power: 565 KW Cooling: Water-cooled Tempering: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: FKI Marelli Generator type: M8B 400 SB4 B3 Gene. Item no.: HM28 167-11 Generator power: 630 kVA Voltage: 400 / 231 volts Power factor: cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power operation Switch: no switch Delivery: Assembled Tank, version: Mounted on the container Capacity / litre: 4.200 Dimensions of the p ...

- Valve bridge MWM 12129392 - Suitable for several motors - Please note! Price per piece! - References -> 12136467 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and int ...

- Oil level control MWM 12480505 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technolo ...

Sabotage-proof RC 2 emergency generator 41 kVA with internal automatic emergency power 72 hours with Yanmar engine 4 TNV 98 for mains parallel operation Aggregate type: stationary Design: Super soundproofed Technical data engine: Engine Manufacturer: Yanmar Engine Model: 4 TNV 98 Engine No.: in production Motor power: 37.7 KW electronically controlled Cooling: Water-cooled Tempering: Electric 12 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 and diesel B7 Technical data generator: Generator manufacturer: Mecc Alte Generator type: Sychron with AVR Gene. No.: in production Generator power: 45 kVA Voltage: 400 / 231 volts Power factor: cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Version: Automatic start Functions: Emergency power operation with ÜSY Tank: Design: Base frame tank with drip pan Capacity / l ...

KIMLA POWERCUT LF 1530 4 kW fiber laser for tubes and sheet metal was built in 2021. The reliable machine, built on a rigid monolithic body, uses advanced fibre technology to cut workpieces with a maximum weight of 900 kg. The 4 kW high-quality fibre optic beam fed directly to the cutting head expands the machining possibilities and guarantees the user very smooth and even edges. The high-quality steel work table with precise mechanical locking stiffens the pallet during cutting, ensuring that the workpiece remains stationary and secure while cutting in the X, Y and Z axes. In order to ensure that the cutting process is uninterrupted, the KIMLA laser cutting machine is also equipped with an automatic pallet changing system which allows workpieces to be loaded and unloaded at the same time, without interrupting the production process. The POWERCUT LF 1530 fibre laser cutting machine ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Deutz AG Engine: BF 4 M 2011 C Engine No.: on request Power: 53 KW Cooling: Oil-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Leroy Somer Generator type: TAL 042 H Gene. No.: on request Generator power: 60 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Manual & remote start Switch: Generator switch 4 poles Tank: Execution: Base frame tank with drip pan Content / liter: 85 Dimensions of the power unit: Width approx. mm: 1.150 Height approx. mm: 1.647 Length approx. mm: 2.540 ...

- Charge air cooler MWM - Suitable for several motors - Please note! Price per piece! It is a scrap part. - References -> 12301219 - 12141936 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By ...

Key data: 360 , 450 , 400

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Scania Engine: DC 13 72 A (02-13) Engine No.: in production Power: 393 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: S4L1D-G41 Gene. No.: in production Generator power: 450 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 800 Dimensions of the power unit: Width approx. mm: 1.600 Height approx. mm ...