stationary used for sale

Key data: 32 , 40 , 400

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Yanmar Engine: 4 TNV 98 TGGEH Engine No.: 189150 Power: 38.7 KW Cooling: Water-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: S1L2. K1 Gene. No.: X22A025026 Generator power: 40 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power operation Switch: Mains/generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 170 Dimensions of the power unit: Width approx. mm: 910 Height approx. mm: 1.350 ...

Stationary air compressor Lutos DI 70-4 Oil-free Efficiency 3100 rpm 90 kW Weight 410 kg Ask for an offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biała USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl info@inter-wiba.com.pl

WSM Stationary screwdriving unit screwdriving station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is surrounded by a protective enclosure. The service doors are equipped with interlocking monitoring switches. The doors are locked in automatic mode and can only be opened when the automazik stop or in manual mode after pressing the doors on the control panel. When the door is open, automatic operation cannot be started. Functional sequence The station is equipped with the pre-assembled assembly via the transfer belt. The work steps of the automatic station with a run of a WT are described below. In normal operation, all 3 stations work in parallel. - Positioning the WT with the pre-assembled assembly in St.2.1 - Lowering the wearer with the scanner and the vision sensor - Scanning of the 3 codes (front panel, fro ...

2 BRINKMANN screed Boy built in 2005 and 1996 for sale immediately from stock, without guarantee and warranty

Bohle stationary column for drums and containers, suitable for feeding tablet presses etc. Maximum weight 600kg.

One used Filzmoser GH300 girder line Flexible welding line for the production of standard and special truss girders (e.g. shear reinforcement girders or decking girders) in mid-size to small series Girder hights: 80 to 300mm Girder length: up to 14.000mm

Used Rotary Drum / Screen Drum Manufacturer: Stadler Type: Sorting Drum Year of manufacture: unknown specifications: Diameter: approx. 2,500 mm Length: approx. 8,200 mm Perforation: 50 x 50 mm Weight: approx. 20,000 kg without steel frame, without catwalks, without lanyard

Straightening cutting system with inserting robot and lattice girder processing 1. Straightening, cutting and bending machine Fabr. Fast, type Lista Bend 16/5-12, wire diameter 8-16 mm Coilw. up to 5t, Wire feed up to 140m/min, max. rod length 12,500 mm, bending distance 900 - 10,000 mm, two servogest. Bending head units with autom. Dorm change, five rotor straightening system, fully automatic Wire change, transfer magazine for autom. Taking 2. Fully automatic. AUTOLAYER installation system, - Processes lattice girders and rods, two inserting robots with 4 double gripping units each, positioning with additional stroke and 90° rotation. Head, system area 13,000 x 8,000 mm 3. Lattice girder assembly BWC 450 - For lattice girders up to 14 m, lattice girder height 70 to 45 mm, fully automatic. Storage, feeding, welding, cutting & unloading - Operating system Window

1 gebr. Lattice beam processing plant, make Progress / GTA with infeed and outfeed working magazine and a double welding head Lattice girder processing station with multiple linear robots for storage & processing composed of: Auto. Storage system with handling beam Auto. transversely movable positioning carriage with 6 pcs lattice girder infeed tracks Lattice girder cutting machine Linear movable gripping unit (inlet gripper) Linear movable gripping unit (outlet gripper) Conveyor & buffer magazine, stacking beam Technical data: lattice beam height 70-300 mm, lattice girder width 70 - 90 mm, max. measuring/cutting length 10,000 mm, min. measuring/working length 800 mm, lattice carrier upper chord connecting welding system, for processing lattice girders type KT 800 in Heights from 70 - 360 mm and width from 70 - 90 mm

1 gebr. Straightening cutting system with inserting robot and lattice girder processing from a carousel system for ceilings and walls Specifications: 1.) Straightening-cutting and Bending plant, Fabr. Quick Type Lista Bend 16/5-12 max. bar length: 12,500 mm, bending distance 900 - 10,000 mm 2.) Fully automatic. Autolayer installation system processes lattice girders & rods Two insertion robots, each with 4 double gripping units System area 13,000 x 8,000 mm 3.) Lattice girder assembly BWC 450 for lattice girders up to 14 m, lattice girder height 70-45 mm, fully automatic. Storage, feeding, welding, cutting & unloading Operating System Windows-based AWM Software

gebr. Cutting straightener Progress Ø 6 - 14 mm Outlet 8 m 5 reels Switchboard PC, Software Documentation

Stationary high-pressure cleaner HENKEL S 1010, nameplate not found, for water and foam, 1 handle in the adjoining room

Mixing plant/fresh concrete, with PEMAT mixer, winterproof with heating Sauter/gas, capacity 45-50 m³/h - Binder: 2x60 t (30x30)t & complete silo technology & cement screws - Aggregates: Bucket elevator via revesier belt in chambers (chimneys new about 3 years ago) Boxes/volume = 5 chambers (40,40,30,70,30)t, incl.: moisture measurement, incl.: mixer feed = weighing container (3000 kg) to the inclined belt (cleats) in mixer - Additives: incl. storage/volume: Second-chamber scale 25/5 kg - incl. spirit level: container scale 300 kg - Mixer : PEMAT - Partial mixer 1.25 m³ with 2 mech. Whirling

A stationary Putzmeister concrete pump in trailer design is available. Motor power: 7.5kW, max. delivery pressure: 40bar, delivery capacity range: 30l-90l/min, max. aggregate size: 8mm, piston stroke: 130mm, piston diameter: 100mm, mixing hopper volume: 170l, feed hopper volume: 200l, filling height: 1300mm. Machine dimensions X/Y/Z: approx. 3650mm/1600mm/1600mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible.

Mischturm, Fabr. Liebherr, type Betomat 235 Aggregate silo size 290 m³ / chambers Cement silo: 3 silos (2x60 to + 1 divided with 2 x 30 tons) Forced Action Mixer: BHS Twin Shaft Trough Mixer = Type: DKX 1,67 / refurbished - 1 x Control: BENNINGHOVEN (latest version) Year of construction 89', the system was completely overhauled 5 years ago with control electrical conveyor belt - 1 x Kroll oil heater for winter operation The price of 65,000 euros is intended as a basis for negotiation, as the customer needs the space.

• GROWI wood splitting plant • Type: GAS 850 • Year of construction 2025 • Serial number: 2025048 • Stationary firewood processing plant • Hydraulic splitting drive • Integrated chainsaw unit • Longitudinal conveyor belt / discharge belt • Robust steel construction • Control station with hydraulic control • Emergency stop available • CE version • Suitable for professional firewood operation • High work performance • Stable feet • Well-maintained condition • Ready to use • Ideal for forestry and firewood operations Auction-ID: 04C-FSE-2

Electric Drum Screen Machine Drum length 7000 mm, diameter 2000 mm Drive 22 kW incl. control cabinet incl. cleaning brushes Screen perforation and colour according to customer requirements ROBUST CONSTRUCTION ! Optional: Vibratory feed conveyor

- Drum length 5500 mm, diameter 2000 mm (as with Doppstadt SM 620) - Motor 15 kW - Control cabinet - Cleaning brush - Hole size of the drum according to customer requirements - New machine manufactured in Europe - Documentation and CE - 1 year warranty