stationary block making used for sale

Kitchenette Premium cooking block MKN 370x90x86 cm, composed of: - deep roaster: frying surface 44x56x10 cm, 2 zones switchable 50°C-300 °C, 400 V, 7.2 kW, 14 A, plug 16 A, - Double fryer London II: 2×12 litres, basket size 16x30x11 cm, swivel radiator for easy cleaning, oil drain tap, 400 V, 12 kW, 18 A, plug 32 A - Hob: 2 zones separately switchable, 34×63 cm, 400 V, 6 kW, 9 A, plug 16 A - Bain Marie: 230 V, 3 kW, 12 A - Heating cabinet: 30°C to 110°C, 71x74x33cm - Gas stove 6 flames: set to liquefied petroleum gas 30 kW, with electric oven. 400 V, 5.9 kW, top and bottom heat separately switchable, 50 °C – 300 °C, for 2/1 GN - incl. railing optionally mountable on both sides or on one side for center installation or wall installation, width of the railing incl. spacer 12 cm

Stationary block machine SUMAB R-500 – automatic control model (with automatic operation equipment, including PLC, sensors, hydraulic valve's switching from manual to electrically operated). Working pallet dimension: 1400 x 700 mm. Useful area Max.: 1250 x 650 mm. With stationary block making machine Sumab R-500 following concrete products are produced on efficient way: hollow blocks, insulated blocks, paving stones, curbstones and others. Production capacity in 8 h/100%: Hollow blocks: 12960 pieces (20x20x40 cm) Paving stone: 864-1016 m2 (10x20x6 cm) For more information, please send a request.

With PRO 400 concrete products machines we provide excellent medium-level entry solution, and also long term solution for many customers. These machines combine durable, heavy-duty construction with the possibility for assembly various concrete product lines - from simple to fully automatized. Production of high-quality concrete products is offered with RHP series of machines: concrete paving stones, hollow blocks, solid blocks, insulated blocks, curbstones, gardening blocks, etc... PRO machines are working with hi-efficiency vibration system named SYNCHROTRONIC VIBRATION. Vibrators driven with frequency regulators enables the operator to adjust the frequency during machine cycle providing hi-speed mould feeling and final product compaction. The rigid mechanical structure of the vibrating table and vibrators ensure hi durability and low maintenance. PRO 400: • Production board s ...

Euroblock 12 movable block machine offers a very wide production range of concrete products. It can be used as a universal machine as well as special product making machine. This multi-purpose block machine can be used for the production of: Hollow blocks Chimney blocks Hourdy blocks Insulated blocks Garden blocks Solid blocks Curbstones Paving stones with or without face mix Layers separated by plastic foil or by sand. With its standard safety devices, rigid frame construction that allow heavy duty use, and simplicity of design that reduce maintenance to a minimum, this machine is the most economical choice for a very wide range of concrete products manufacturers. Useful area: 1290 x1130 mm (product height 170 ? 250 mm) Useful area: 1290 x900 mm (product height 250 ? 500 mm)

Design of PRO 1000 concrete products machines put this machine beside most flexible in the world. The most versatile machines in their class, the PRO machine series offers the largest variety of handling and cubing systems available. By upgrade of handling the equipment on the wet and dry line side, the capacity of complete installation can be increased significantly. Double layer products are easily produced with and optional face mix device. Pallet size: 1400 x950 mm Useful area: 1350 x850 mm Paving stones 10x20x6 cm Production capacity in 8h 1355m2 Hollow block 20x20x40 cm Production capacity in 8h 17280 pieces

With PRO 500 concrete products machines we provide excellent medium-level entry solution, and also long term solution for many customers. These machines combine durable, heavy-duty construction with the possibility for assembly various concrete product lines - from simple to fully automatized. Production of high-quality concrete products is offered with PRO series of machines: concrete paving stones, hollow blocks, solid blocks, insulated blocks, curbstones, gardening blocks, etc... PRO 500: • Production board size: 1400x700 mm • Production area: 1300x650 mm • Production height: 25 - 300 mm

Machine a blocs mobile Contec SP 5 pour la fabrication des blocs, hourdis, blocs U, pavee, bordures, blocs mur etc. Max hauteur de produit 300 mm Min hauteur de produit 100 mm surface travaillant max. 1000 x 500 mm Capacité: jusqu´a 3.500 blocs 400 x 200 x 200 mm / 8-heures poste de production

Pallet size 1.270 x 1.050 x 125 mm Production area Max. 1.240 x 1.000 mm Block height Max. 500 mm Min. 50 mm Year 2006 With Spare parts (pumps, motors etc..) With 5 pieces molds and 300 pieces metal pallets Machine maintained than dismantled

with 14 shapes with 14 Forms

APPLICATIONS: - Paving manufacture - Curb manufacture - Concrete block manufacture for: - masonry - foundation - posts - floor slabs - chimneys - gutters - roadway gutter covers ADVANTEGES: - Vibrators on tamper head. - Bunker and drawer for finishing layer of paving and kerbs. - High productivity - active area 1,10 x 0,6m - Automatic operation: PLC (Mitsubishi Electric) logic programmer + touch display + software for automatic machine operation; Schneider Electric electrical command and control components - Our wide range of moulds can ensure a diversified production. - Reliable mechanical and hydraulic systems. COMPONENTS: B79qqiplcm - Press unit - Pallet space - Pallet feeding line - Hopper and drawer (1) for feeding the mould with concrete - Hopper and drawer (2) for making the finishing layer (paving, kerbs) - Pall ...

Our company currently offers the R-1000 stationary concrete block machine. The SUMAB R-1000 is one of the most technologically advanced machines on the market! A giant among all block machines! Real money maker! Using a SUMAB R-1000, you can produce the following products: • Empty blocks • Curb stones • Paving stone • Tiled stone Technical details: • CAPACITY - 1000 m2 pavers per shift. • BLOCKS 20X20X40 18000 pieces/8 h Scandinavian quality and good prices! Contact us for pricing and technical specs! We will provide you with the best solution for your business projects!

SUMAB R 400 Für Blöcke, Bordsteine, Pflastersteine Produktionsfläche: 1100x500mm Palettengröße: 1200x550 mm Maximale Produkthöhe: 330 mm Mindestprodukthöhe: 40 mm Produktionskapazität in 8 Stunden / 100 %: Hohlblock: 6.912 Stück (20x20x40 cm) Pflasterstein: 550-640 m2 (10x20x6 cm) SUMAB R 400 For blocks, curbstones, pavers Production area: 1100x500mm Pallet size: 1200x550 mm Maximum product height: 330 mm Minimum product height: 40 mm Production capacity in 8h / 100%: Hollow block: 6,912 pieces (20x20x40 cm) Paving stone: 550-640 m2 (10x20x6 cm)

Our company offers the SUMAB E-12, which is a movable concrete block machine. The E-12 is a block machine that uses a technique known as egg laying,” where the block machine moves and produces concrete block products on the ground to dry – We offer the machine in fully/semi-automatic modes. With the SUMAB E-12, the following concrete products can be produced in an efficient way: • Hollow block stones • Solid block stones • Chimneys • Light weight blocks • Paving stones [with vibration table option] additional option Production capacity: For hollow blocks 400 x 200 x 200 mm ………. 1.200 blocks/h. For hollow blocks 400 x 200 x 120 mm ………. 2.000 blocks/h.

Niemeyer shaft base paver for lower parts 1100 mm incl. many accessories such as moulds, base sleeves, rotating device, spare parts, from location, immediately available

Henke brick system for DF bricks, with complete circulation, palletizer, strapping, lifting and lowering ladder, trolley, hardening chamber, 2000 boards as new, approx. 10 shapes, armor plate tape, etc. fully functional, immediately available from location

Henke brick system for DF bricks, with complete circulation, palletizer, strapping, lifting and lowering ladder, trolley, hardening chamber, 2000 boards as new, approx. 10 shapes, armor plate tape, etc. fully functional, immediately available from location

SUMAB R-500 MAX Fully automatic block line with concrete batching plant. Block line is in stock and ready for delivery! Technical details: • Automatic control model (with automatic operation equipment, including PLC, sensors, hydraulic valve's switching from manual to electrically operated) • Working pallet dimension: 1400 x 700 mm. • Operation area Max.: 1300 x 650 mm. With the SUMAB R-500 stationary block machine, the following concrete products can be produced in an efficient way: hollow blocks, insulated blocks, paving stones, curb stones and others. Production capacity in 8 h/100%: Hollow blocks: 12960 pieces (20x20x40 cm) Paving stone: 864-1016 m2 (10x20x6 cm)

Fully automated sand-lime brick factory. 50,000 tonnes/year. Modernised in 1986, 2000 & 2019. The current plant meets today's high safety standards and has been continuously modernised and modified. The residual steam is reused for heating company buildings. Packaging installation: fully automatic The entire installation is fully automated, with the exception of the manual opening and closing of the autoclave doors. 2x Atlas Krupp Polysius presses (1 with new Bosch Rexroth hydraulic system and controls) Forming boxes for different stone formats Conveyors and silos Primary crusher Gyradisc 36 Jg. 1980 Fine crusher SBM V8 machine nr.12041/2X Vibrating screen GFA sieve 0-3mm Mixer machine factory Gustav Eirich, type DE 22 Machine no. 23104, built in 1984, with vortex device capacity 1500 lt/ 2400 kg Eirich mixer, with agitator 1.5 m or 2.5 t 2 x reactors Namur mixer, with w ...

ZENITH 844 paving plant with face mix device and packacking line. Control Siemens PLC Simatic S5. Including 5 moulds. 4 paving/interlock moulds and 1 lawn edge kerbstone mould 1 Parolin/Wave mould 6 cm, 1 Unidekor mould 6 cm, 2 Rectangular moulds 8 cm, 1 lawn edge kerbstone mould. See Mould list in photos. 300 steel production boards Plant is in very good, well-maintained condition.

1 Gebr. Stone production plant Fabr. Locksmith Board size 1400 x 1150 Consisting of: Stone forming machine Schlosser SV 40 Compl. with hydraulic station Compl. Pallet circulation Stacking machine Pallet transverse transport with board stack gripper Product forming, i.e. 14 floors / 2 pallets/floor Collecting scaffold in front of the lift ladder, etc. Euro pallet magazine approx. 4000 wooden boards 5 pcs. gebr. Form

Used sand-lime brick press, hydraulically working, two-sided compaction, 195 kW install. Power, control S5, max. pressing force approx. 10,000 kN, max. pellet height 650 mm, for the production of sand-lime brick blocks and elements, fully automatic operation, plant still in operation – visit possible

MachineApplications: manufacture of paving, kerbs, concrete blocks for masonry, foundation, pillars, floor slabs, chimney stacks, gutters, roadway gutter covers. 1 Advantage: Powerful vibration provided by 2 electric motors Tamper head equipped with 2 vibration motorsSchneider Electric electrical control and command components Our wide range of moulds can ensure a diversified production. Reliable mechanical and hydraulic systems. Component parts from trusted pateners: Drive: electrical and hydraulic Operate: Mostly manual (commands executed automatically: stop vibration when reaching height, start/ stop exhaust line) Concrete mould supply: Mechanised with hydraulic control Optional equipment: ) Auxiliary equipment for the paving and kerb finishing (hopper and drawer) Production cycle automation Electrical panel with PLC + HMI + software Automatic elevator with product panels f ...

Ground paver Knauer TYPE Komet 104 C built in 1980. Manual machine for small quantities or trial productions. Stone height maximum 50 cm For hollow blocks, chimney blocks, lightweight concrete blocks, etc. Very robust machine, with manual hydraulic control. The electrics are very simple and easy to repair. The machine is ready for operation and was still used for special stones until the introduction of a new fully automatic machine. It is well maintained. However, all guides and drives are in order and well lubricated. Without mold shaker and mold, these are in the photo, but are not included. Spare parts are also still available and could be purchased at the time of sale.

ID2149 Pedershaab Multiflex – Plant for the production of concrete pipes Plant for the production of concrete pipes, little used, with concrete feeder, with 10 jackets for 1m pipes, with 4 cores (300, 400, 500, 600 mm diameter) for 1m pipes, with approx. 90 base sleeves, output approx. 60-70 pipes per 8 hours, ready for use Plant for the production of concrete pipes, little used, with concrete feeder, with 10 pieces of jackets for 1m pipes, with 4 cores (300, 400, 500, 600 mm diameter) for 1 m pipes, with approx. 90 pieces of lower sleeves, capacity approx. 60-70 pipes per 8 hours, ready for use

Complete plant for the production of L bricks and wall panelsMould list : 7 pieces of wall panel formwork 12 cm Pos. 1 Masonry panel formwork 550 / 800 x 490 mm Number of wall panels : 12 pieces 550 x 490 mm 12 pieces 550 x 490 mm Pos. 2 Masonry panel formwork 550 x 990 mm Number of wall panels : 16 pieces 550 x 990 mm Pos. 3 Masonry panel formwork 800 x 990 mm Number of wall panels : 16 pieces 800 x 990 mm Pos. 4 Masonry panel formwork 1050 x 990 mm Number of wall panels : 16 pieces 1050 x 990 mm Pos. 5 Masonry panel formwork 1300 / 1550 x 990 mm Number of wall panels : 8 pieces 1300 x 990 mm 8 pieces 1550 x 990 mm Pos. 6 Masonry panel formwork 1050 / 1300 x 490 mm Number of wall panels : 8 pieces 1050 x 490 mm 8 pieces 1300 x 490 mm Pos. 7 Masonry formwork 18000 / 1300 x 4 ...

Used concrete block mould for the production of 2 concrete steps each with nominal lengths of 90cm, 100cm, 110cm and 120cm. The mould includes fitting parts and corresponding printing plates, which are built into the mould according to the step length to be produced. Step height 18cm. Step tread approx. 27cm. The mould was used on a concrete block machine type Schlosser SV40.

Used brick production line Make OMAG with Teka mixing plant approx. 20 shapes approx. 3,000 pieces of production boards 1400x950mm Used concrete block production plant / pavers production plant Manufacturer: OMAG Teka mixers about 20 moulds about 3000 production boards 1400x950mm

Used brick production line Locksmith SV40 Year of construction: 1994 with lifting ladder, sliding platform, lowering ladder Drying chamber with 3,000 storage spaces approx. 1,600 production plates Used block, pavers, stone manufacturing plant Locksmith SV40 Year of construction: 1994 with lifting ladder, transfer platform, lowering ladder Drying chamber with 3,000 places approximately 1,600 production boards

Transport trestle, steel trestle, heavy-duty shelving, steel trestles, heavy-duty trestles, tubular bearing trestle, transport trestle -Steel trestles: pipe bearing trestles / transport frames 2 pieces -Execution: massive steel construction with wooden support -Usage: for storage and transport of heavy round material -Price / fee: complete -Dimensions: 1300/305 / H980 mm -Weight: approx. 206 kg / pc.

Stationary air compressor Lutos Oil-free air blower Ask for an offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biała USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl info@inter-wiba.com.pl

WSM Stationary screwdriving unit screwdriving station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is surrounded by a protective enclosure. The service doors are equipped with interlocking monitoring switches. The doors are locked in automatic mode and can only be opened when the automazik stop or in manual mode after pressing the doors on the control panel. When the door is open, automatic operation cannot be started. Functional sequence The station is equipped with the pre-assembled assembly via the transfer belt. The work steps of the automatic station with a run of a WT are described below. In normal operation, all 3 stations work in parallel. - Positioning the WT with the pre-assembled assembly in St.2.1 - Lowering the wearer with the scanner and the vision sensor - Scanning of the 3 codes (front panel, fro ...

equipped with 1 Holz Her feeding device

Max. grain size: 32mm, max. delivery pressure: 75bar, max. rotational speed: 1500/min, max. hydraulic pressure: 300bar, connected load: 45kW, weight: 2.5t, operational hours counter: 2990h, with single-axle chassis, four support legs and cable remote control.

2 BRINKMANN screed Boy built in 2005 and 1996 for sale immediately from stock, without guarantee and warranty

stationary transition, stationary crossing EUROLINE 512 Size 6 5126306 Step load: max. 150 kg Total load: max. 300 kg DIN EN ISO 14122 Clear height ( inside ): 1210 mm handrail with knee bar installed on both sides, Height: 1100 mm Climb angle: 60° 5 steps: 1000 x 180 mm Step spacing: 210 mm Platform size: 1440 x 1000 mm Platform height: 1240 mm Material: aluminum, steps: aluminum grooved used, tested ! Dimensions (assembled, length x width x height): 2760 x 1180 x 2360 mm

stationary transition, stationary crossing GÜNZBURGER STEIGTECHNIK 5100 x 3150 x 3060 mm Total load: max. 200 kg Clear height (inside): 1800 mm handrail with knee bar installed on both sides, height: 1100 mm Climb angle: 45° 9 Steps: 800 x 240 mm Step spacing: 225 mm Platform size: 3100 x 800 mm Platform height: 1920 mm Material: aluminum, steps: aluminum grooved used, tested ! Dimensions (assembled, length x width x height): 5100 x 3150 x 3060 mm

stationary transition, stationary crossing PAGUS 4200 x 2600 x 2510 mm Clear height ( inside ): 1400 mm handrail with knee bar installed on both sides, height: 1000 mm Climbing angle: 45° 7 steps: 900 x 240 mm Step distance: 190 mm Platform size: 2450 x 900 mm Platform height: 1500 mm Material: steel ( galvanized ), steps: steel, grating ( galvanized ) used, tested ! Dimensions (assembled, length x width x height): 4200 x 2600 x 2510 mm

stationary transition, stationary crossing PAGUS 4640 x 4600 x 2420 mm Clear height ( inside ): 1330 mm handrail with knee bar installed on both sides, height: 1100 mm Climb angle: 45° 7 steps: 990 x 270 mm Step spacing: 190 mm Platform size: 4480 x 1040 mm Platform height: 1430 mm Material: steel, steps: steel, grating ( galvanized ) used, tested ! Dimensions (assembled, length x width x height): 4640 x 4600 x 2420 mm

stationary transition, stationary crossing GÜNZBURGER STEIGTECHNIK 4500 x 4220 x 2340 mm Total load: max. 200 kg Clear height (inside): 1100 mm handrail with knee bar installed on both sides, height: 1100 mm Climb angle: 60° 4 steps: 2x 800 x 200 mm / 1x 600 x 200 mm Step spacing: 250 mm Platform size: 3200 x 800 mm / 2660 x 800 mm Platform height: 1210 mm Material: aluminum, steps: aluminum grooved used, tested ! Dimensions (assembled, length x width x height): 4500 x 4220 x 2340 mm

stationary transition, stationary crossing GÜNZBURGER STEIGTECHNIK 5960 x 1160 x 2880 mm Total load: max. 150 kg Clear height ( inside ): 1550 mm handrail with knee bar installed on both sides, height: 1100 mm Climb angle: 45° 7 steps: 1000 x 240 mm Step spacing: 225 mm Platform size: 4230 x 1000 mm Platform height: 1780 mm Material: aluminum, steps: aluminum grooved used, tested ! Dimensions (assembled, length x width x height): 5960 x 1160 x 2880 mm

stationary transition, stationary crossing PAGUS 162000 x 3470 x 2870 mm Clear height ( inside ): 1640 mm handrail with knee bar installed on both sides, height: 1100 mm 3 stairs, climbing angle: 40° 9 steps: 1000 x 270 mm Step spacing: 190 mm Platform size: 13850 x 1020 mm Platform height: 1770 mm Material: steel, steps: steel, grating ( galvanized ) used, tested ! Dimensions ( assembled, length x width x height ): 162000 x 3470 x 2870 mm

stationary transition, stationary crossing GÜNZBURGER STEIGTECHNIK 3720 x 960 x 2310 mm total load: max. 200 kg Clear height (inside): 1090 mm handrail with knee bar installed on both sides, height: 1100 mm Climb angle: 45° 5 Steps: 800 x 240 mm Step spacing: 205 mm Platform size: 1400 x 800 mm Platform height: 1210 mm Material: aluminum, steps: aluminum grooved used, tested ! Dimensions (assembled, length x width x height): 3720 x 960 x 2310 mm

1 piece of used scraper / scraper Manufacturer: Liebherr Type: LSM 16/11 Completely overhauled/repaired in 2022 Year of construction 2009 In perfect condition AT CALL Location: Southern Germany Price on request Offer and prices are purely net ex location Subject to prior sale, errors and/or misrepresentations excepted, without guarantee and/or warranty, as seen, lying and/or standing

Mat bending machine Hambi TV 30 V = reinforced design, up to single rod 12 mm, Passage width: 3 meters, Weight: 645 kg

Bohle stationary column for drums and containers, suitable for feeding tablet presses etc. Maximum weight 600kg.

We can offer you all types of Wafios nail machines from S25 - N90

We can offer you all types of Wafios nail machines from S25 - N90

we can offer various wire pin presses, please ask for our list

overhauled in 2006 after overhauling only 100 workinghours Available: sofort

Specifications / Technical Data S-400/T CNC portal fraesmachine / engraving machine, TUeV certified Already more than 4500 CNC machines of type High-Z sold worldwide ! With the T-variant of the High-Z CNC-Fraesmaschine you acquire old-fashioned technology with the certain I-T-Tpfelchen The High-Z/T is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. The high-Z/T CNC fraes machine achieves fantastic accuracy and an almost unmeasurable reversal of about 0.01mm due to the ball-circuit spindles used. At the same time, high travel speeds of up to 108mm/second ( 6500mm/ minute) can be achieved. Thus, engraving and fraes speeds of up to approx. 4500mm/min can be realized and fast-moving speeds up to approx. 7000mm/min. This is just as applicable in the industrial sector for work such as engraving, frause, drilling, measuring, cutti ...