star lathe used for sale

Strong Ball bearing start-up ring set 1x Ball Bearing Idle Brushes (62x30mm) 1x Washer Starting rings: 75, 80, 85, 90, 95, 100, 105, 110, 115, 120mm

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 0T Technical data Number of axis total: 5 Max. turning diameter: 16 mm Turning length: 130 mm Max. drilling diameter: 8 mm Max. threading diameter: 6 M (Metric) Internal spindle diameter: 16 mm Spindle speeds: stepless from: 375 rpm up to: 8000 rpm Tool-holder: number: 5 Counter-operation: number of tools: 3 Drilling tools: 3 pce Spindle motor: 2.2 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: 1700 mm Width: 1000 mm Height: 1900 mm Various accessories: Set of toolholders Bar feeder Manufacturer: LNS Type: MINI-SPRINT

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 0T Technical data Number of axis total: 5 Max. turning diameter: 16 mm Turning length: 130 mm Max. drilling diameter: 8 mm Max. threading diameter: 6 M (Metric) Internal spindle diameter: 16 mm Spindle speeds: stepless from: 375 rpm up to: 8000 rpm Tool-holder: number: 5 Counter-operation: number of tools: 3 Drilling tools: 3 pce Spindle motor: 2.2 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: 1700 mm Width: 1000 mm Height: 1900 mm Various accessories: Set of toolholders Bar feeder Manufacturer: LNS Type: MINI-SPRINT

- overhauled in 2007 (spindle bearings + silde guides) - control: FANUC OT - max. turning Ø: 16 mm - max. turning length in 1 fixture: 130 mm - spindle speed: 300 - 8.000 1/min - cross tools: 5 - spindles in frontal device: 3 - max. boring-Ø: 8 mm - max. thread-Ø: M6x1,0 - fixed and rotating guide bush - parts removal backwards for long partse - after-ripening device - weight: 1.000 kg - div. tool holders - barfeeder CNC-Boss 542/32L, Bj. 1994

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Series 16i-T Technical data Number of axis total: 9 Number of spindles: 2 Max. turning diameter: 205 mm Machining diameter max.: 12 mm Spindle speeds: stepless up to: 12000 rpm C axis (spindle,resolution): 0.01 ° Independent carriage: Number of positions: 5 number of driven tools: 3 Spindle speeds (turning tools): 6000 rpm Power of driven tools: 0.5 kW Back spindle: up to: 12000 rpm C axis (spindle,resolution): 0.01 ° Turret slide: number: 1 number of tools: 8 number of driven tools: 8 Spindle motor: 5.5 kW Power of back spindle: 3.7 kW Machine´s weight about: 3400 kg Overall dimensions machine: Length: 2670 mm Width: 1375 mm Height: 1600 mm Various accessories: Bar feeder Manufacturer: LNS Parts catcher Workpiece conveyor Lamp Coo ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Series O-T Technical data Number of axis total: 5 Max. turning diameter: 16 mm Turning length: 130 mm Max. drilling diameter: 8 mm Max. threading diameter: 6 M (Metric) Internal spindle diameter: 16 mm Spindle speeds: stepless from: 300 rpm up to: 8000 rpm Tool-holder: number: 5 Counter-operation: number of tools: 3 Drilling tools: 3 pce Spindle motor: 2.2 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: 1700 mm Width: 1000 mm Height: 1900 mm Various accessories: Set of toolholders

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Series O-T Technical data Number of axis total: 5 Max. turning diameter: 16 mm Turning length: 130 mm Max. drilling diameter: 8 mm Max. threading diameter: 6 M (Metric) Internal spindle diameter: 16 mm Spindle speeds: stepless from: 300 rpm up to: 8000 rpm Tool-holder: number: 5 Counter-operation: number of tools: 3 Drilling tools: 3 pce Spindle motor: 2.2 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: 1700 mm Width: 1000 mm Height: 1900 mm Various accessories: Set of toolholders

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Series O-T Technical data Number of axis total: 5 Max. turning diameter: 16 mm Turning length: 130 mm Max. drilling diameter: 8 mm Max. threading diameter: 6 M (Metric) Internal spindle diameter: 16 mm Spindle speeds: stepless from: 300 rpm up to: 8000 rpm Tool-holder: number: 5 Counter-operation: number of tools: 3 Drilling tools: 3 pce Voltage 50 Hz 3x: 380 Volt Spindle motor: 2.2 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: 1700 mm Width: 1000 mm Height: 1900 mm Various accessories: Set of toolholders

Star SR-32 Swiss Type CNC Lathe Machine is in working condition All maintenance has been done regularly FMB Bar feeder Chip and tool conveyor are included

Max. Machining Diameter : 20 mm Max. Headstock Stroke : 205 mm Fedek XT-320SI bar feeder Machine is in good condition Power on : 21017 Operating time : 15223 Cutting time : 12542 Bar feeder

Star RNC16 sliding head lathe, in excellent condition, working and operational. Iemca Mini Boss charger included

This Star SR-20RIII lathe was made in the year 2008 and has 40652 working hours. It is equipped with a Fanuc Series 300is-MODEL A control unit. The machine has a spindle speed of 10000 rpm.

This STAR SR-20 R II Lathe was manufactured in the year 2004. It is equipped with a Fanuc Series 18i-TB control unit and has 7 axis. The machine has a spindle speed of 500-10000 rpm.

This machine was powered only by oil. General: Year of construction 2011 Control Fanuc Series 18i TB Main spindle 15,000 rpm Counter spindle 10,000 rpm Rod diameter max. 10 mm Rapid traverses 35 m/min Dimensions: 1,860 x 780 mm x 1,500 mm Weight 1,500 kg Other equipment and accessories: C-axis Part ejector Coolant tank Kraft & Bauer extinguishing system Bar feeder FMB micromag 3200

Star SV32 sliding head lathe ::SPECIFICATIONS::: CNC Model: Fanuc - CNC Version: 16i - TB - Main Spindle Power: 7,5Kw - Main Spindle Bar Clearance: 32mm Headstock stroke (Z1): 310mm - Main spindle speed: 7000 - Number of linear axes: 7 Number of fixed tool holder plate positions: 4 Number of driven tool holder plate tool slots: 3 High refrigerant pressure: yes Number-of turrets-tool-slides: 1 number-of tools-first-turret-slide: 10 Number-motorized-first-turret-slide: 10 Sub-spindle: yes Sub-spindle speed: 7000 Power against spindle: 3.7Kw Bar clearance: 32mm Z stroke sub-spindle : 150mm Refrigerant Used: Neat Oil Bar magazine model and brand: Iemca Boss 432 Chip conveyor: belt conveyor Machine equipment: Set of fixed tool holders, motorized and tilting :::D DIMENSIONS AND WEIGHT::: Length: 2645mm Width: 1403mm Height: 1680mm  ...

complete with IEMCA BOSS 552 HD bar loader for 4 m bars High pressure CNC Fanuc 31 IModelB5 Number of axles 7 axles Diameter 38 mm Rated power 2 kW, 4 kW Total length 2,740 mm Total width 1,315 mm Total height 2,120 mm Weight 4,300 kg Prompt delivery Visible under power Year 2016

Description: Operating hours with pick-up: ,20573 hrs. with bar feeder, type Haas Bar Feeder, Serial 158892, Chip conveyor, type P09.17M8736.01, Serial NP-12332927 serial number: 0095, Approx. Onsite Dimension. (l x w x h): 3,200 x 1,400 x 2,200 mm, weight approx.: 4,300 kg

Description: Operating hours with pick-up: 91452 hrs. with bar feeder, type FMB turbo 3-36/3200A , Serial 48-261109 R 751911, Chip conveyor, type P09.08M7464.01, Serial 815064 turning diameter: 32 mm, serial number: 0797, control: Fanuc 18i-TB, Approx. Onsite Dimension. (l x w x h): 2,600 x 1,800 x 1,700 mm, Type of clamping chuck: collet chuck, C-axis simultaneously controllable: No, Counter spindle: Yes, Integrated C-axis: Yes, Tailstock: No, Bar feeder: Yes, weight approx.: 3,100 kg

Description: Operating hours with pick-up:76804 hrs ith bar feeder, type FMB turbo 3-36/3200A , Serial 51-261513 R879213, Chip conveyor, type P09.11M3416.01, serial 12300408 turning diameter: 32 mm, serial number: 1123 (174), control: Fanuc 18i-TB, Approx. Onsite Dimension. (l x w x h): 2,600 x 1,800 x 1,700 mm, Type of clamping chuck: collet chuck, C-axis simultaneously controllable: No, Counter spindle: Yes, Integrated C-axis: Yes, Tailstock: No, Bar feeder: Yes, weight approx.: 3,100 kg

serial number: 1,120, Approx. Onsite Dimension. (l x w x h): 2,600 x 1,800 x 1,700 mm, weight approx.: 3,100 kg

Description: Operating hours with pick-up:22760 hrs. with bar feeder, type FMB turbo 3-36/3200A , Serial 57-263358, chip conveyor, type P09.17M5112.01, Serial 12329522 serial number: 3,654, Approx. Onsite Dimension. (l x w x h): 2,600 x 1,800 x 1,700 mm, weight approx.: 3,100 kg

Description: with bar feeder, type FMB, Chip conveyor, typeP09.03M6841.01, Serial 64464 turning diameter: 32 mm, serial number: 0274, control: Fanuc 16i - TB, Approx. Onsite Dimension. (l x w x h): 2,600 x 1,800 x 1,700 mm, Type of clamping chuck: collet chuck, C-axis simultaneously controllable: No, Counter spindle: Yes, Accessories included: Yes, Integrated C-axis: Yes, Tailstock: No, Bar feeder: Yes, weight approx.: 3,800 kg

Description: Operating hours with pick-up: 125245 hrs. with bar feeder, type FMB, chip conveyor, type P09.04M6258.01, serial 44660 Further technical data can be found in the PDF turning diameter: 20 mm, serial number: 0581 (054), control: FANUC Series 18i-TB, Approx. Onsite Dimension. (l x w x h): 2,400 x 1,200 x 1,700 mm, C-axis simultaneously controllable: No, Counter spindle: Yes, Accessories included: Yes, Tailstock: No, Bar feeder: Yes, weight approx.: 2,200 kg

bar material dia.:38 mm turning length:350 mm turning speeds:7.000 / 7.000 U/min number of tools:30 (3 x 10) driven tools:ja / yes control:FANUC 31i-B5 rapid traverse:30 m/min total power requirement:10,5 kVA weight of the machine ca.:6,5 t dimensions of the machine ca.:2,50 x 1,45 x 1,75 plus Lademagazin m work piece power:4 kW toolpiece turning speed range:5.700 1/min main spindle power:11 kW sub spindle power:7,5 kW CNC sliding headstock machine STAR ST 38, 3 turrets, 12 CNC Axis (X1/Z1/Y1/C1/X2/Z2/Y2/YA2/C2/X3/Z3/Y3, Fireextinguisher KRAFT und BAUER FB 703, partscatcher and conveyor belt (for long parts), LTA oilmist suction, chiller for oil, machining with oil as coolant, reading hours: approx. 14.500 hours "machine on", approx. 4.100 hours "machining"

This STAR-BEND STAR 800 CN6/GEN/L Bending machine was manufactured in the year 2006 in Italy. It is equipped with a STAR-BEND control unit and has 6 axis.

STAR SV-38R CNC turning centre built in 2015 in Japan, stands out for its unparalleled flexibility and broad functionality, which makes the machine ideal for complex applications in many industries t.e. automotive or aerospace. With the help of two spindles (main spindle and sub-spindle) with C-axis, the STAR SV 38R CNC lathe performs precision machining of inclined surfaces, including front and back angle holes in up to 11 axes. Both spindles of the machine are driven by reliable, high-power motors, which is used for the versatile use of cutting tools taken from the tool holder or the 10-position turret tool head. A special system for guiding the end of the Z-axis spindle through the headstock also guarantees high rigidity and stability at the cutting point. The STAR SV38R lathe is offered with an extensive range of equipment, including an FMB turbo 5-55 / 3200 A bar feeder, workpie ...

Control: Fanuc Series 16-T bar capacity: 32 mm - - -: - - - - - - Turning Automatic Lathe - swiss lathe | STAR - SR 32 The machine is in clean condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: SR32 | SR-32 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sliding head lathe Star SR 38 Type A :::SPECIFICATIONS::: CNC Model: Fanuc CNC version: 31i model B Main spindle power: 11Kw Main spindle bar clearance: 38mm Headstock stroke (Z1): 320mm Main spindle speed: 7000 Number of linear axes: 7 Number of fixed tool holder plate positions: 14 Number of driven tool holder plate tool slots: 7 Rapid feeds for linear axes X Y Z: 36m/min High refrigerant pressure: yes External tank system with filter: yes Sub-spindle: yes Sub-spindle speed: 7000 Power against spindle: 5.5Kw Bar clearance: 38mm Number of motorized rear tools: 8 Coolant Used: Neat Oil Model and brand of bar loader: Iemca Boss 552-HD for 4 meter bars Chip conveyor: belt conveyor :::D DIMENSIONS AND WEIGHT::: Length: 2740mm Width: 1315mm Height: 2120mm Weight: 4300Kg

NC sliding headstock lathe Star SE 16 FMB Minimag bar loader high pressure coolant pump, Control: Fanuc 21i-TB

CNC Lathe Star Type: JNC - 16 YOC 1986 Control: Fanuc. With many accessories, spare parts, partly new or used, such as- Monitor, Inverter, Keypad, Encoder, Servo Drives, Power Unit, Spindle, Hydraulic Power Unit, Hydraulic Valves, Switches, etc. (see pictures).

bar material dia.: 16 mm spindle passage: 18 mm turning length: 205 mm turning speeds: 10000 U/min positive location each: 15 Grad gripping station: 16 turning length: 80 mm turning speeds: 8000 U/min number of tools: 5+4+3 number of milling stations: 3 control: Fanuc 18i-TB Number of axles: 5 St. total power requirement: 3,7 kW weight of the machine ca.: 1,6 t dimensions of the machine ca.: 1,9x1,1x1,75 plus FMB m bar loader: FMB Minimag 20 Bj. 2010 parts conveyor: ja/yes CNC sliding headstock lathe Star SB 16 (year 2005) with FMB Minimag 20 (year 2010) good condition, available immediately. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Producer: INJECT STAR Type: FPW 17 Internal dimensions: Length 1620 x width 560 x height 1480 mm External dimensions: Lenght 1000 x width 500 x height 1050 mm 1 piece - not complet. Used pneumatic meat press for meat and bacon INJECT-STAR type FPW 17 with the possibility of the time setting and the automatic program - Air consumption approx. 7 bar Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Pump vacuum cleaner with integrated submersible pump that continuously pumps absorbed liquids out of the container, RCDs in the mains connection cable, special filter bags, application-oriented accessories. The pump can be completely removed and the container closed, so this industrial vacuum cleaner can also be used as a normal wet-dry vacuum cleaner. Areas of application: Suction/suction of large quantities of liquid, use in floods, use in flat roof renovation, cleaning of garden ponds and pool facilities. SCOPE OF DELIVERY Including accessory set pump vacuum cleaner. Additional filter 1 x FSS 1200 (foam) Filter bag 1 x FSN 80 1 x Suction hose Ø 35 mm x 5 m 1 x Drain hose Ø 33 mm x 5 m 1 x Handle tube plastic with secondary air slider 2 x Suction pipe plastic (each 50 cm) 1 x Aluminium professional floor nozzle 45 with rubber and briste strips EQUIPMENT Main filter FPP ...

High-temperature oven with a maximum working temperature of 1,800C and lowerable/swivel bottom. All sides of the furnace chamber are heated with Kanthal super elements (= MoSi2). Temperature homogeneity is achieved by downward removable U-elements. Operation with 3 transformers and thyristor control. Chamber dimensions: 500 mm x 500 mm x 500 mm (= 125 l.). The oven is practically unused (only about 50 fires).

High temperature kiln with a maximum working temperature of 1.800°C and a descending / pivoting bottom plate. All lateral walls inside the chamber are heated by Kanthal Super heating elements (= MoSi2). Temperature homogeneity is achieved by the use of U-shaped elements that can be taken out downwards. Operating with 3 transformators and thyristor control. Chamber dimensions: 500 mm x 500 mm x 500 mm (= 125 l.). Kiln is in mint condition (ca. 50 firings only).

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Operating hours: 75960 Technical data Number of axis simultaneous: 5 Number of tables: 1 Number of spindles: 1 Table load max.: 800 kg Longitudinal travel (X-axis): 800 mm Transversal travel (y-axis): 750 mm Vertical travel (z axis): 620 mm Dimension of the workpice: Height: 550 mm Diameter: 500 mm Table divisions (B): 0,001° ° A axis: 145° (+35/-110°) Table speed: 30 rpm Pallets:: System Staflex number: 4 Length: 500 mm Width: 500 mm Transport weight: 200 kg Tool changer: Number of tools: 60 Tool diameter max.: 120 mm Diameter with free adjacent pockets: 200 mm Tool lenght: 400 mm Max. tool-weight: 15 kg Spindle nose:: HSK-A 100 Spindle speeds:: STEP TEC stepless up to: 12000 rpm Torque max ...

Various clamping systems with zero-point clamping systems. Various groes. For larger parts, e.g. 1000 - 1500 mm or larger. With hydraulic connection for grid plate clamping. All Wuerfel with corresponding grid plates. clamping and grid plates from well renowning German manufacturers. Best condition. 40 slabs available in various size; Very good

Various clamping cubes with Zero-point clamping systems. Various sizes. All are for larger parts, for example 1000 - 1500 mm or larger. With hydraulic clamping of the clamping angles. All the cubes are fitted with clamping angles. The clamping cubes and clamping angles are made by best precision well named German manufacturers. All in excellent condition. 40 units in various sizes. ; Very good

North Star NSRC / EMCO Pulse Generator Pulse Generator 54kV The pulse generator used in this system consists of two capacitor assemblies which are charged to opposite polaritaants. The system is operated with pressurized insulating gas to supply the specified voltage range of the operation. nitrogen is used for the pulsergefaess for the entire range, wherethe pulse generator pressure of atmospheric pressure (0 psig) reaches to a maximum (60 psig). With 60 psig nitrogen, the pulse generator has at least 27 kV per capacitor and thus delivers a pulse of about 54 kV to the peaking capacitor.

Used machine Starrag Heckert CWK 400D

Type: PI 88 Number of needles: 88 Two pressure pump Needle diameter: 4 mm Max product: width 360 mm Tact per minute: 15 to 55 tact/min. Passage mechanism type: gear rack rail Product passage height: 220 mm Brine pressure: 0,5 to 4,0 bar Electric power: 6.5 kW Machine dimension in cm: Width: 60 Lenght: 210 Height: 190 Delivery time: 30 working days after advanced payment

Saw blade Diameter 400 mm Saw capacity 150 mm round Suitable for: - Plastic pipe - Air clamping Country of origin Netherlands Engine power 2.2 kW Machine Weight 750 kg