standard used for sale

MATEC easily from our own development and production running lightly and quietly and transport bulk material and individual loads up to 250 kg with minimal energy over long distances up to 12 m at a time with a hand drill 300 w power consumption. The combined forced - and promotion of resonance stores the kinetic energy in the spring and must compensate for only the frictional resistance of the material. Sawdust, shavings, gravel, Earth, grain, hay and grass, etc. are exactly same speed transported with approximately 17 m / min. by means of Frequenzumforner the speed can be adjusted. The transport and screening in a single operation with a built-in sieve base perforation on request MATEC Vibrorinne standard Trough width inner 500 mm Trough height inner 260 mm current trough length 2500 mm (can front and rear to 1.5 m be extended without additional support) In addition current ...

Galvanized fence fields, new with concrete feet and joints. Offer: 20 hoarding fields stand type with 21 feet of concrete and 20 connector = 699,00EUR + VAT = 34,95EUR / piece. Also available separately! The fields are with tubular steel frame, the stuffing out of 2.50-3, 00 is welded to the tube mm steel wire inside. The elements are completely galvanized. 1 x construction fence field 2, 00 m x 3, 47 m = 27,90EUR + VAT 1 x construction fence titanium reinforced on the corners at top prices only 29,90EUR + VAT 1 x construction fence / visibility protection net, 1, 76 m x 3, 41 m = 9,90EUR + VAT 1 x construction fence box 1, 20 m x 3, 47 m = 24,90EUR + VAT 1 x Bauzaufeld 2, 00 m x 3, 47 m more anti climbing = 37,00EUR + VAT 1 x concrete foot 5,90EUR = tax 1 x plastic foot 6,90EUR = tax 1 x plastic foot made of 100% recyclable plastic 9,90EUR + VAT 1 x = element con ...

Shrink Tunnel Kallfass Standard 450 N; State as is; checked only for function; Inlet width 400mm; Pass-through height 200mm; Cooling fan. Shrink tunnel Kallfass Standard 450 N; condition as is; only chekced on function; width 400mm; hight 200mm; cooling unit.

Format 1200 x 750 mm without ruler Working size 120x75cm 220V / 120 Watt / 50.60 cycles (Hz) Dim L130 x W80 x H130 cm

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 50 mm -Tube: Ø outside mm -Stroke: 290 mm -Total length: retracted 607 mm -Admission: hole Ø 50 mm -Ideal for building a hydraulic press -Dimensions: 607/145/220 mm -Weight: 37 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 32 mm -Stroke: 140 mm -Total length retracted: 460 mm -Admission: hole Ø 23 mm -Dimensions: 460/60/H135 mm -Weight: 8.5 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder -Manufacturer: GSL, Hydraulic cylinder, tilting cylinder, stroke 1590 mm -Type designation: D040025-Z2 T06 -Piston rod: Ø 25 mm / Mounting Ø 20 mm -Dimensions: 1895/90/110 mm -Weight: 19.5 kg

Very robust and easy-to-use machine for dividing panel-shaped wood-based materials. - welded, multi-braced, Construction - Support rollers braked - Slatted frame with wooden overlays - long middle support on optimal Height - Fixation for vertical and horizontal cut - Two scales for adjusting the Cutting width for horizontal cutting - Powerful, low-vibration motor Cutting length horizontal mm : 4.300 Cutting length vertical mm : 2.200 Cutting depth mm : 80 Machine length mm : 5.300 Transport heightmin mm : 2.550 Saw blade diameter mm : 303 Dimensions LxH : 5300x2750 mm

- welded, multi-braced, Construction - Support rollers braked - Slatted frame with wooden overlays - Powerful, low-vibration motor Cutting length horizontal mm : 5.300 Cutting length vertical mm : 2.200 Cutting depth mm : 80 Machine length mm : 6.300 Transport heightmin mm : 2.550 Saw blade diameter mm : 303 Dimensions LxH : 6300x2990 mm

Specifications Maximum pressure: 12 tons Power supply: 380V/ 5.5 kW Press force: 2.5 kg/cm² Year of construction: 1985-1993 Bale size: 800x600x(600-1000)mm Productivity: approx. 3 bales/hr Bale weight: approx. 100 - 200 kg Price: on request Machine is fully functional, after technical supervision.

Tetra Alfast Direct Inline standardisation system, designed for inline standardisation of milk and cream. Capacity 25000 l/u. YOM: 2014 Equipped with 2 density meters, 4 electro-magnetic flowmeters and 3 flow control valves for measuring and controlling fat content in milk and cream. Including original documentation. Controls setup for centralised operation. Excellent condition.

brake drum -Bore: conical Ø 27 to 32 mm with keyway -Outer diameter: 220 mm -Inner diameter: 200 mm -Recess: Ø 67 mm -Number: 4 drums available Price: per piece -Weight: 6.5 kg/piece

Valve block, control block, hydraulic control block, control unit, control valve -Manufacturer: GSL (German Standard Lift), control block for the drive of work platforms -Model code: Valves 4070... see photos -Dimensions: 340/300/H400 mm -Weight: 40 kg

CARVING machine type ANDREONI STANDARD 12 second hand machine working conditions : good Technical details : - rotary device for the simultaneous rotation of the model and the pieces (3D) - manual chuck of mandrins unit - also to work with flat pieces n.12 spindles distance betwen spindles mm. 300 rotation speed by HF converter rpm 6.000 / 12.000 max. working length ( on rotation ) mm. 1900 net weigth kgs. 2500 volt. 380/50 With tools : Yes ( as in photo attach )

Control unit, control element, interface, drive control, drive current control, high-performance pulse control, pulse control -Manufacturer: GSL (German Standard Lift), high-performance impulse control for driving work platforms -Type: 1204-406 -Voltage: 36-48 V -Dimensions: 195/145/H75 mm -Weight: 2 kg

Valve block, control block, hydraulic control block, control unit, control valve -Manufacturer: GSL (German Standard Lift), control block for the drive of work platforms -Model Code: Valves 4070... see photos -Dimensions: 340/300/H160 mm -Weight: 38 kg

1 standard steam boiler system, capacity: 10.8 to 13 bar Manufacture No. K19105/AV up to 300 °C steam temperature with overhead feed water tank, capacity 19,860 l, manufactur. Kyll Bergisch Gladbach with a complete feedwater treatment system Total power 10500 kW with white head burner machine Type RGL70(2-A), No. 5163093 with stand-alone control cabinet still operational, shut down at the end of 2022

Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Manufacturer: GSL (German Standard Lift), hydraulic reservoir for the drive of work platforms -Additional parts: see photos -Dimensions: 300/295/H550 mm -Weight: 11.4 kg

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for driving work platforms from GSL (German Standard Lift) -Drive shaft: Ø 22 mm toothed -universally applicable -Number: 3x motors available -Price: per piece -Dimensions: 235/125 mm -Weight: 15 kg/piece

Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs, pipe laying equipment -Manufacturer: Cordes, CORWETT pipe-laying device type ZI standard -Gripping width: 300 to 600 mm -Load capacity: 750 kg -Number: 1x gripper available -Dimension: 1000/510/H950 mm -Own weight: 59 kg

We offer about 8 pieces of foldable lattice boxes Condition: Mint

Potentiometer, dual potentiometer, regulator, controller, level regulator, control Manufacturer: Elvo, Regulator Controller -Type: COF2AC -Voltage: 115-230 V 50-60 Hz -Number: 2x controllers available Price: per piece -Dimensions: 265/160/H90 mm -Weight: 1 kg/pc.

Treatment width: 8mm-12mm, max. plasma generator diameter: 32mm, plasma generator length: 210mm, cable length: 3m, inlet pressure: 5bar-8bar, gas consumption: approx. 2m³/h, generator power: 300W, frequency: approx. 40kHz, dimensions X/Y/Z: approx. 420mm/140mm/500mm, control: manual/semi-automatic, operating hours: 81h. Documentation available. On-site inspection is possible.

Technical data and features: -Made in Germany -Type Standard Shepherd Series 14/6-2 -Made of high-quality stainless steel sheet -Dimensions length 425 x width 275 mm -Material thickness: 1.5mm -Weight: approx. 1.5 kg -315 shape punches for bayonet closure with the plastic clips -The currently available used workpiece carriers are partly electropolished and partly marked. We offer used and new workpiece carrier systems with different plastic clips, also as custom-made products and in different sizes. In addition, the appropriate basket systems and automation technology are also available if required.

Cutting length: 5.300 mm Cutting height: 2.200 mm Dimensions (L/W/H): 6.470 x 1.281 x 2.885 mm output: 4 kw turning speeds: 4.750 U/min saw-blade dia.: 300 mm Cutting depth: 80 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 1000 mm turning diameter: 350 mm turning dia. in gap: 450 mm spindle bore: 40,0 mm turning speeds: 70 - 2000 U/min bed width: 180 mm spindle taper: 55029 D 1-4 taper in tailstock: 3 MK quill travel: 110 mm total power requirement: 1,5 kW weight of the machine ca.: 529 kg. range L-W-H: 1730x700x1340 mm Scope of delivery: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-160 mm / D4 - Face plate 200 mm / D4, according to DIN 55029 - Fixed steady rest - passage diameter max. 60 mm - Follow-on steady rest - passage diameter max. 60 mm - Clamping plate 250 mm - Quadruple tool holder - Shaft fixing device - Protection device for tool holder - Slip clutch - Micrometer longitudinal stop - Coolant device - Extendable chip tray - Frequency converter - Foot pedal with brake function according to CE - Splash guard - Thread gauge - LED machine light - Digital speed dis ...

For sale is a Perfactory 4 LED Standard XL SET A precise and reliable 3D printer for industrial applications. The machine is particularly suitable for use in jewelry, dental, and prototype production, where high levels of detail and surface quality are crucial., Technical highlights:, - Model: Perfactory 4 LED Standard XL, - Technology: DLP (Digital Light Processing), - Light source: High-performance LED for long life and stable exposure, - Construction volume: Large print volume for versatile applications (XL version), - Resolution: Finest details down to the micrometer range, - Operation: User-friendly interface, quick material changes, Advantages:, - Low operating costs thanks to long-lasting LED technology, -, - Robust and reliable for daily use, - Ideal for series production of small components and prototypes, Condition:, - Used, good condition, - Fully functional and ready to use,  ...

One complete and one partially dismantled extruder system Davis are available. 1) Davis Standard DS-25, power: 6385W, max. melt pressure: 700bar, max. temperature: 315°C. Including 4x screws, 6x bursting discs, Digicolor dryer, platform, screen changer with heating and sealing pack, new cylinder, 3x screw seals, and spare drive motor. 2) Davis Standard DS-20, power: 4500W, max. operating pressure: 700kg/cm², max. temperature: 315°C. Including Conair dryer, 3x screws, screen changer with heating and sealing pack, cast housing, extrusion tool, and spare drive motor. General accessories: various ring heaters, 3x Eurotherm temperature controllers, and 3x Eurotherm pressure sensors. Documentation available. An on-site inspection is possible.

JRIMAC Slitting Saw STANDARD -NEW- - Cutting length: up to 6,200mm - Cutting width: 420 - 2,120 mm - Motor power: 11/15 kW - Cutting height: 175 mm - Precise, clean cut - Cutting accuracy +/- 0.5 mm - Hold-down device with extremely strong slat protection, and extraction connection - PLC machine control - Stepless, frequency-controlled, power-stable feed motor - Convenient semi-automatic saw blade height adjustment - Stepless width stop adjustment - Saw blade quick clamping system "JRIMAC" - Front table support made of plastic or solid wood - Force-guided splitting wedge - Lower standard extraction duct installed ready for connection - CE compliant, dust tested - Processing of more than 12 different materials possible - Reliable spare parts and customer service

General SKU259P364 LocationBarneveld MakeITT standard plateflow (usa) TypePF 35 No.A50535-01 Year of construction1995 Pressure Working pressure10.3 Bar Main Features MaterialStainless steel Surface13 m2 Size length380 mm Sizes width350 mm Specified Features - Plate heat exchanger MaterialStainless steel Plate heat exchangerscheck Heating surface+/- 13m2 Number of platens41 Plate sizes380x850 mm Connections(4x) 110 mm Max. temperature110 degr.C Information Mounted on framecheck Floorspace0,9X05 M Total height1,0 M Weight500 KG Technical specs Extra informationindicated size is platen sizePlate heat exchangersITT Standard BuffaloHeat exchangers > Plate heat exchangersBrand > ITT Standard Buffalo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are w ...

General SKU389X986 LocationBarneveld MakeDickow Pumpen TypeNCL s 200/400 Mach.No.24221005 Pressure Working pressure4.5 Bar Main Features MaterialCasted steel Volume500000 Ltr. Motor90 KW Specified Features - Centrifugal Pump Pumpcheck Capacity500 m3/h With motor90 kW (400 V, 1485 rpm) Inlet250 mm Outlet195 mm Centrifugal Pumps MaterialSilicon steel 1.5023 Information Year of construction2024 Mounted on framecheck Total height1,05 m CEcheck Floorspace0,85 x 2,2 m Weight1500 kgCentrifugal PumpsDickow Pumpen GmbHPumps > Centrifugal PumpsBrand > Dickow Pumpen GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Dimensions (L/W/H): 960x900x1460 mm Weight: 200 kg Total power requirement: 2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Side Tables, Air Table, Programmable, Standard Accessories

This 4-axis TAJMAC-ZPS H63 Standard was manufactured in 2005. It features a robust Siemens control system, X-axis travel of 1010 mm, Y-axis of 800 mm, and Z-axis of 1010 mm. The work table measures 800 mm in length and 630 mm in width. Ideal for precision machining, buy this TAJMAC-ZPS H63 Standard horizontal machining centre. Reach out for more information.

This Bystronic ByTrans 3015 Standard was manufactured in 2014. Ideal for automation systems, it offers reliable performance for handling tasks. Consider the opportunity to buy this Bystronic ByTrans 3015 Standard automation system. Contact us for more information.

General SKU389X985 LocationBarneveld CEcheck MakeDickow Pumpen Pressure Working pressure4.5 Bar Main Features MaterialCasted steel Volume500000 Ltr. Motor90 KW Specified Features - Centrifugal Pump MaterialSilicon steel 1.5023 Centrifugal Pumps Pumpcheck Capacity500 m3/h With motor90 kW (400 V, 1485 rpm) Inlet250 mm Outlet195 mm Information TypeNCL s 200/400 Mach.No.24221006 Year of construction2024 Mounted on framecheck Floorspace0,85 x 2,2 m Total height1,05 m Weight1500 kgCentrifugal PumpsDickow Pumpen GmbHPumps > Centrifugal PumpsBrand > Dickow Pumpen GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Cutting length: 5300 mm Cutting height: 2200 mm output: 4,4 kw turning speeds: 4.750 U/min Cutting depth: 80 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1502.930 B Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mm NEW Manufacturer : Kalmeijer Type : KGM 250 NEW Order number : 1502.930 B Details see picture PLUSPOINTS Heating of the figure roller, do not sprinkle flour and thus better baking method Changing the figure roller without tools within one minute Baking tray transport can be folded down, takes up little space. Â Kalmeijer KGM pastry forming roller Standard rollers 250mm Removable dough feed roller, so easy to clean Adjustable thickness of the dough figures (for the right weight)

Kalmeijer 1613.900 B KGM Pastry Forming Roller Manufacturer : Kalmeijer Type : KGM 250 NEW Order number : 1613.900 B Details see picture ADVANTAGES Heating of the figure roller, no flour and thus better baking Changing the figure roller without tools within one minute Baking tray transport can be folded down, takes up little space. Â Kalmeijer KGM pastry forming roller Standard rollers 250mm Removable dough feed roller, so easy to clean Adjustable thickness of the dough figures (for the right weight)

Kalmeijer KGM Pastry Forming Roller 1263.900 B NEW Manufacturer : Kalmeijer Type : KGM 250 NEW Order number : 1263.900 B Details see picture PLUS POINTS Heating of the figure roller, no flour sprinkling and thus better baking Changing the figure roller without tools within one minute Baking tray transport can be folded down, takes up little space. Â Kalmeijer KGM pastry forming roller Standard rollers 250mm Removable dough feed roller, so easy to clean Adjustable thickness of the dough figures (for the right weight)

Kalmeijer KGM 1501.920 B Pastry forming roller Standard rollers NEW Manufacturer : Kalmeijer Type : KGM 250 NEW Order number : 1501.920 B Details see picture ADVANTAGES Heating of the figure roller, no flour sprinkling and thus better baking Changing the figure roller without tools within one minute Baking tray transport can be folded down, takes up little space. Â Kalmeijer KGM pastry forming roller Standard rollers 250mm Removable dough feed roller, so easy to clean Adjustable thickness of the dough figures (for the right weight)

Kalmeijer Pastry Forming Roller KGM  1380.910 Bra Maker : KalmeijerType : KGM 250NEWDedetails see picturePLUSPOINTSThe heating of the figure roller, do not sprinkle flour and thus better baking styleChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space.  Kalmeijer KGM pastry forming roller Standard rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)Automatic “stop and start“ (machine comes to a stop when there are no more dough sheets or baking trays

Kalmeijer 1383.901 B KGM Pastry Forming Roller Manufacturer : Kalmeijer Type : KGM 250 NEW Order number : 1383.901 B Details see picture PLUS POINTS Heating of the figure roller, do not sprinkle flour and thus better baking Changing the figure roller without tools within one minute Baking tray transport can be folded down, takes up little space.  Kalmeijer KGM pastry forming roller Standard rollers 250mm Removable dough feed roller, so easy to clean Adjustable thickness of the dough figures (for the right weight)

Kalmeijer KGM 1612.910 B Pastry forming roller Manufacturer : Kalmeijer Type : KGM 250 NEW Order number : 1612.910 B Details see picture ADVANTAGES Heating of the figure roller, no flour sprinkling and thus better baking method Changing the figure roller without tools within one minute Baking tray transport can be folded down, takes up little space. Â Kalmeijer KGM pastry forming roller Standard rollers 250mm Removable dough feed roller, so easy to clean Adjustable thickness of the dough figures (for the right weight)

Kalmeijer KGM Pastry Forming Roller 1612.900 B Manufacturer : Kalmeijer Type : KGM 250 NEW Order number : 1612.900 B Details see picture ADVANTAGES Heating of the figure roller, do not sprinkle flour and thus better baking method Changing the figure roller without tools within one minute Baking tray transport can be folded down, takes up little space. Â Kalmeijer KGM pastry forming roller Standard rollers 250mm Removable dough feed roller, so easy to clean Adjustable thickness of the dough figures (for the right weight)