stal 80 used for sale

X-axis: 800mm, Y-axis: 400mm, Z-axis: 400mm, max. workpiece weight: 150kg, software: Windows 7, with documentation. An on-site inspection is possible.

MBO folder type T 800 6-4, built 2005. With PIAB air system, Navigator control, steel plate in feeder, serial equipment-slitting shafts and manuals. Configuration: 1. MBO T 800 1-1-78/6: folding unit 1 have 6 pockets that can be automatically adjusted 2. MBO T800 1-2-78/4: folding unit 2 have 4 pockets that are manually adjusted 3 MBO Stream delivery. TESTED. All rollers in very good condition. One auto pocket needs new servo motor. Available immediately. Can ship worldwide.

01 set Picanol Air-Jet Weaving Looms, type OmniPlus 800 – 220-4R YOC 2010, working width 220 cm, 4 weft colors Stäubli electron. dobby 2881 – 16 shafts installed, Sumo motor, electron. take-up and warp let-off, max warp beam flange dia. 1,000 mm, off-loom take-up

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Spindle bore87 mmDiametre of spindle nose170h5 mmSpindle diametre on front bearing130 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (40% DC)10 kWMain drive 1Drive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range25 - 5000 rpmAccuracy at point stopping0,01 degreeFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive s ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the  ...

This 4-axis DMG CTX beta 800 4A was manufactured in 2013. It features a maximum turning diameter of 340 mm and a turning length of 735 mm. The machine is equipped with two 12-station tool turrets and an integrated spindle motor with a maximum speed of 4000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG CTX beta 800 4A multi-spindle turning machine we have for sale. Contact us for further details.

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose220h5 mmSpindle diametre on front bearing160 mmSpindle bore102 mmMain drive 1Drive power (100% DC)33 kWSpeed range20 - 4000 rpmTorque (100% DC)580 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)580 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (40% DC)10 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the a ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmLongitudinal stroke850 mmTransverse stroke300 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmMain drive 1Drive power (100% DC)33 kWSpeed range20 - 4000 rpmTorque (100% DC)580 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the  ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)4,46 x 1,88 x 2,30 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the  ...

C - bow is in good technical and optical condition

Sanding unit IMA Type: 08.062 - oscillating

- Y Travel with head 180 = 3700 - Y from floorplate to spindle middle = 4200 mm - Chain ATC Tool changer 80 positions - Rotary table 1500 x 1500 with V-Axis 1500 mm - Table load 15.000 Kg - Optional Box table 3500 x 1000 x 1000 mm - Under power  - Spindle hours 9300 H 

pressure: 75 t stroke: 250 mm daylight longitudinal/sideways: 800 x 215 mm dayligth: 170 - 885 mm working pressure: 7,5 - 8.5 bar weight of the machine ca.: 0,45 t dimensions: 1,2 x 0,8 x 2,1 mm Hydraulic/pneumatic workshop press Cylinder can be moved sideways pneumatic foot pedal Winch for table height adjustment 2 pcs. pressing blocks CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock number: 3912 PROCESSING Manufacturer: EXCELL, Type: 810 Machine NO.: ES 8031, Year of manufacture: 0 Specifications: Table size 900 x 480 mm Large table load 400 kg Longitudinal movement (X) 810 mm Transverse movement (Y) 510 mm Vertical movement (Z) 560 mm Size distance spindle/table 700 mm Spindle Taper 40 Iso Spindle motor 9 Kw Tool changer 25 places Control Fanuc OM Fabr. Accessories: Cooling water system. Operating instructions Length: 2200 mm, Height: 2600 mm, Width: 3500 mm, Weight: 5400 kg

New shredder Brand: REINBOLD Type: AZR 800 Special 22 kW The AZR series is known for its power. By means of the solid construction the machine also shredders bulky and bigger workpieces. Standard equipment: A row of round knives Ø40 mm with concave shape Turbo coupling Pusher Strenghed screen Switch cabinet with SPS control and 5 m cable Automatical switch-off function at empty container Safety package with gear box end switch and reverse counter Vibration damping machine feet GS-sign (dust tested) & CE-sign Technical data: Hopper opening: approx. 800 x 1200 mm Fill height: approx.1.610 mm Container volume: approx. 1,1 m³ Working width of the rotor: approx. 740 mm Rotor Ø: 354 mm Power main motor: 30 kW - 400 V - 50 Hz. - 3 Ph. Power hydraulical motor: 0,75 kW - 400 V - 50 Hz. - 3 Ph. Rotor speed: approx. 90 rpm. Number of blades: 20 pcs. round knives Kin ...

description: 180 ° curve conveyor suitable for different tray formats. Belt width 800 mm Radius 1800 mm New-quality motor can be offered with the desired requirements width: 4450 mm length: 2500 mm serial number: 642-92-900 S176 Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK techni ...

Linpac 15pcs. transport trolleys for Trolley euroboxes underframe 800x600x200 mm 300kg load capacity RA2210 Technical data: Length: 800 mm Width: 600 mm Height: 200 mm Load capacity: 300 kg for two paralell euroboxes Material: stable plastic body Underride height: approx. 100 mm Weight: approx. 9.1 kg Configuration: 2 steering and 2 fixed castors Purchase quantity 15, stacked L x W x H approx. 800 x 600 x 2270 mm Total weight: approx. 136.5 kg Year of manufacture: unknown Stackable: yes, through cutouts Condition: Used / fully functional Color: red Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Height in mm: 200 Width in mm: 600 Länge in mm: 800 Traglast kg: 300 For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. W ...

Pressure total: 80 - 800 ton Ram stroke: 1600 mm Free frontal opening L-R: 2850 mm Free lateral opening F-B: 1000 mm Daylight: 1900 mm Table surface area : 2800 x 2000 mm Slide area: 2800 x 2000 mm Die cushion capacity in table: 32 - 320 ton Die cushion stroke: 400 mm Die cushion pad area: 2500 x 1700 mm Approach speed: 400 mm / sec Working speed: 5 -42,7 mm / sec Return speed: 420 mm / sec Required power: 246 kW Height over floor approx.: 7785 mm Weight of machine approx.: 100 ton No. of moving bolster: 1 pcs.

Sehr kompakte Andruckpresse / very compact Case Bender Jagenberg 800 Andruckpresse / Case Bender Jagenberg 800 Serial-No. 1032029 Arbeitsbreite / Working width max. 800mm Stufenlose Geschwindigkeitsregulierung / steppless Speed Regulation Walzen Höheneinstellung / Roller high adjustment

Watercooled chiller/Heat pump Climaveneta NX WN 802 251 kW/282 kW Cooling capacity: 251 kW / 71.37 tons (12/7 — 35°C) Heating capacity: 282 kW / 80.19 tons (40/45 —7°C) Year of manufacture: 2016 Options: Heat pump Refrigerant circuit: 1 pcs. Heat exchanger: Plate Compressors: 2 pcs. Copeland ZP485KCE-TWD-522 (scroll) Type of refrigerant: R410a Dimensions: 1.6x1.1x1.95 m Working hours: 124/102 h. Condition: Outlet

Heftkopf / Stitching Head Müller Martini HK 75 0881.8070 Stitching Head Müller Martini HK 75 0881.8070

Heftkopf / Stitching Head Müller Martini HK 75 0881.8070 Stitching Head Müller Martini HK 75 0881.8070

GeneralVertical Machining Centres; Control: DMG MORI SLIMline® Multi-Touch control CharacteristicsMaximum load (table centre)800 KgDimensions (L x W x H)3,3 x 2,7 x 2,94 mRapid feed X / Y / Z30/30/30 m/minMovement X / Y / Z800/560/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with30 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmTable surface1100 x 560 mmWeight approx.5550 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SysteminlineMASTER® spindle 12.000 rpminlineMASTER® spindle 12.000 rpm Spindle speed range 20 to 12.000 rpm Tool Taper SK40 DIN69871 with BIG PLUS inteface Tool clamping according to DIN69872 Power: 13kW (40% DC) / 9kW (100% DC) Torque: 83 Nm (40% DC) / 57 Nm (100% DC) bearings oil-air lubrSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872NC-D ...

This 3-axis POSmill B 800 was manufactured in 2014. It features an X-axis travel of 800 mm, Y-axis travel of 510 mm, and Z-axis travel of 630 mm. The machine includes a table size of 950 x 510 mm and a spindle speed of 10,000 RPM. If you are looking to get high-quality machining capabilities, consider the POSmill B 800 vertical machining centre we have for sale. Contact us for further details.

Opening width min./max.: 600mm/800mm, operating pressure: 6bar, hydraulic pressure: 50bar-200bar, max. clamping force at 200bar: approx. 779.8kN, max. opening force at 200bar: approx. 978.3kN, power supply: 400V/32A. Dimensions X/Y/Z: approx. 2500mm/2050mm/2799mm. The mold carrier is used for handling PU foaming molds. Documentation available. Inspection possible by arrangement.

Chain pipe wrench, pipe chain wrench, chain pipe wrench, chain wrench, chain pliers, pipe clamping system, pipe welding machine, pipe assembly device -Chain wrench: Pipe chain wrench type No. 3 -Length: 800 mm -Dimensions: 800/100/H60 mm -Weight: 5.7 kg

Oil-Insulated Power Transformers for Sale - Manufacturer: ELIN - Model: JDR 8000/110 - Power Rating: 8 MVA - High Voltage: - 124.85 kV (Position 9) - 110 kV (Position 0) - 95.15 kV (Position -9) - Low Voltage: 25 kV - Current Rating: - High Voltage: 37.5 A (Position 9), 42.0 A (Position 0), 47.7 A (Position -9) - Low Voltage: 185 A - Frequency: 50 Hz - Cooling: ONAN - Year of Manufacture: 1960 - Status: Out of service since early 2024 - Notable Condition: Low oil inhibitor content and specific resistance; otherwise, oil is in good condition. Oil treatment with inhibitor replenishment recommended. Find more here - .ucymachines/ Contact us at - sales@ucymachines

max. format 78 x 115 cm Year of construction 2002 MC Control Counting device MCC 3 Round stack feeder Dual feed 6 fold pockets in the parallel fold section Downstream knife shaft Window rebate bag Vertical stack delivery Delivery date: immediately Price on request. We supply and install worldwide.

Linpac 15pcs. transport trolleys for Trolley euroboxes underframe 800x600x200 mm 300kg load capacity RA2210 Technical data: Length: 800 mm Width: 600 mm Height: 200 mm Load capacity: 300 kg for two paralell euroboxes Material: stable plastic body Underride height: approx. 100 mm Weight: approx. 9.1 kg Configuration: 2 steering and 2 fixed castors Purchase quantity 15, stacked L x W x H approx. 800 x 600 x 2270 mm Total weight: approx. 136.5 kg Year of manufacture: unknown Stackable: yes, through cutouts Condition: Used / fully functional Color: red Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Height in mm: 200 Width in mm: 600 Länge in mm: 800 Traglast kg: 300 For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. W ...

Key data: 700 mm, 450 mm, 450 mm

Universal Milling Machine MAHO MH 800 Travel X: 700 mm Travel Y: 450 mm Travel Z: 450 mm Spindle SA 40 Spindle exit : 125 mm Spindle speed: from 32 to 1600 RPM Table size: Length 1050 mm x Width 620 mm Manual table travel: 225 mm Table rotation at 360° Swivel table at +/- 30° Scale 3 axes ACU-RITE Sensory drilling Feeds spindle not working Clutch speed used Lubricant pump Voltage: 380 V Width: 2000 mm Depth: 2100 mm Height: 2500 mm Weight: 3 T

pulling force - max.:80 t total wight:26 t dimensions of the machine ca.:49 m² m total power requirement:85 kW working stroke:250 mm

total power requirement:12 kW weight of the machine ca.:4,6 t

Technical data of the pallet rack crossbar: Shelving system: SSI Schaefer Type: PR600 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 5010 Gentian Blue Box profile: 110 x 40 mm Truss Type: TRV1-180-114-30 CE Agraffe: 5 HK (hooks) Clear width: approx. 1,800 mm Max. load per pair of trusses 3,500 kg, with the same weight. distributed load. 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

turning speeds:10000 U/min output:22 kw weight approx.:20 kg transmission ratio:1: 4,3 high speed spindle with 1 : 4,3 ratio, MK 5 spindle taper and collet chuck for tooling. Misc. parts in wooden case.

Zebra110pax4 label printer and pneumatic stamp. RA2315 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status display and buttons on printer, manual control panel on the side and control via PLC I/O Print type: Thermal transfer printing or direct thermal printing selectable Interfaces: Ethernet/control cable Print media: Standard media, tags and RFID media (reading and encoding of RFIF labels) Current label size: 90x36mm, applicator is designed for this size Label length min: 12.7mm Print media width: 16-114mm Ribbon width: 25.4-107mm Ribbon length max: 900m Roll size core diameter: 25.4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) Dot size: 0.125mm x 0.125mm Print speed: 12 inches/second Base area: 700x700mm, with 100mm protruding control panel/compressed air maintenance unit Applicator height: 800mm lower edge Print speed: ...

Technical data of the pallet rack crossbar: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 100 x 50 mm Truss type: SLB 100|13 Agraffe: 5 HK Clear width: 2,800 mm 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

ALLFASS Foil packaging machine with shrink tunnel Plant consists of: 1) Kallfass Universa 8060/200 foil sealing machine 2) Compact 650SO shrink tunnel 3) Outfeed conveyor system - Extra 4) Storage device for wrapped packages - Extra The goods to be packaged are film-wrapped and sealed inside the Inversa and then shrink-wrapped in the Compact-tunnel. Via a conveyor system the wrapped packages are transported to a parcel storage station. Further technical info => check photos

Key data: 805 kN

Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 80M injection moulding machine, fitted with the Procan Controller. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and ...

Control Siemens ... Sinumerik 840D Sl Table dimensions ... 1600mm Axis X ... 8000mm Axis Y ... 1300mm Axis Z ... 1800mm Spindle speed ... 20-4000 rpm ISO 50 cooling ... 30bar Rapid traverse ... 35m/min Machine weight ... 36500kg

DEMAG ERGOTECH VIVA 800-400 injection moulding machine was built in 2001 in Germany by Demag Kunstofftechnik (currently Sumitomo (SHI) Demag Plastics Machinery GmbH). This highly efficient machine is used for the economic production of plastic parts of different colours, shapes and sizes. These parts are produced using the reliable injection moulding method, which involves feeding plasticised plastic into a mould and then clamping it with high press force. The machine’s high-performance components, including a precision mould clamping system operating at a maximum force of 80 tonnes, ensure high repeatability of the manufactured products. The DEMAG injection moulding machine weighs 3750 kg. Technical specifications of the DEMAG ERGOTECH VIVA 800-400 injection moulding machine - maximum mould clamping force: 80 t (800 kN) - screw diameter: 35 mm - maximum injection weight PS: 157  ...

Rolling mill 800x800 mm, built in 1996 Roller shell thickness 60 mm

Technical data of the pallet rack stand: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack stand, used Material colour: sendzimir galvanised Stand Type: P95 Profile dimensions: 90 x 75 x 2.5 mm Incl. cross and diagonal struts, Stand protectors and base plates The stands are pre-assembled ( bolted truss ) Height: 2,200 mm Depth: 800 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Groninger ZSK800 Cap Sorter BJ.2002 With 5 different format sets Universally applicable, in very good condition!

INCIMAR INCISOGRAFO MC 800 Manual engraving machine/ manual pantograph, with aspirator, Alphabets, various stencils/ templates. For engraving marble and granite surfaces etc.

table diameter: mm workpiece height: mm number of wheels: 2 total power requirement: 11 kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: mm workpiece height: mm number of wheels: 2 total power requirement: 8 kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wheel diameter: 680 mm sawblade length: 8550 mm Sawblade width max.: 1,3 mm Cutting height: mm Motor output: 20 kW Table dimensions: 600 x 620 mm Feed speed: m/min. Machine height: mm Weight: 10.000 kg Bandsaw horizontal, Precision-Saw for Silicon (Solar industry) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 800 mm table load: 0,6 t table height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Circular Indexing Table dia 800 mm, motorized rotating, swivable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 8,0 kN stroke: 40 mm throat: 90 mm Working height from to: 50 - 200 mm table surface area: 120 x 160 mm weight of the machine ca.: 22 Kg dimensions: 160 x 230 x410 mm Knee lever hand press with fine height adjustment SPECIAL PRICE! • Working height adjustable by simply loosening the clamping screws on the stand • Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 680 mm capacity 90 degrees: square: 640 mm : 820x610 saw band length: 5850 x 41 x 1,3 mm band speed: 15 - 100 m/min table height: 800 mm total power requirement: 5,5 kW weight of the machine ca.: 4,45 t dimensions of the machine ca.: 5,85 x 3,6 x 2,7 m 2-column band saw for quick cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effo ...