stal 80 used for sale

Age 1988:- Technical data ILLIG STAL 80 The ILLIG STAL80 can work Inline with any Thermoformer, or it can be used Off-Line as a stand-alone Trim Press. In Stock at our Warehouse in Enger, Germany, Punching table area max: 1000 x 510 mm, Material width max: 800 mm, Infeed length: 20 – 400 mm, Stroke height: 200 mm, Mold height: 272 mm, Punching pressure: 20 000 daN, Drive capacity: 4.16 kW, Total length: 3950 mm, Total width: 2385 mm, Weight approx: 3600 Kg

Amonyak compressor Stal-Astra,screw with ekonomisor,switch box Venig used,only cca.6.000 operating hours.150Kw cooling capacity.

ILLIG STAL80 Trim Press, age 1988:- Technical data ILLIG STAL 80 :  Punching table area max. 1000 x 510 mm  Material width max. 800 mm  Infeed length 20 - 400 mm  Stroke height 200 mm  Mold height 272 mm Part height (positive and negative) max. 100 mm  Number of strokes (infinitely variable) 25 - 130 /min Trimmed Parts are stacked through the Punch Tool The Skeletal Waste is fed directly into the Grinder ILLIG RS75 Under the Trim Press Grinder, Motor 8.3 kW, age 1995

Angle conveyor (roller-chain) - galvanized rollers - stainless steel chain - working length of the roll: 730 mm - roll diameter: 50 mm - lifting on chains: B08-1 - spacing between chains: 145 mm - number of chains: 5 - construction: stainless steel - includes 2 geared motors: - for rollers – SEWUSOCOME; 0.25 kW; 1300/77 rpm - for chains – SEWEURODRIVE; 0.25 kW, 1300/77 rpm

20 MW STAL-LAVAL Industrial Steam Turbine Generator Set Manufacturer: STAL-LAVAL (Sweden) Type: Industrial Multi-Stage Steam Turbine Configuration: Condensing / Extraction-Condensing Manufacturing Era: Circa 1963–1964 Condition: Industrial Condition – Available for Inspection Availability: In Stock Power & Electrical Data: Rated Output: Approx. 20 MW Frequency: 50 Hz Rated Speed: 3000 RPM Generator: STAL-LAVAL GTP Series Generator Poles: 2-Pole Turbo Alternator Cooling System: Radial-flow air ventilation with filtration Coupling: Direct-coupled turbine-generator set Steam Design Parameters: Steam Pressure Class: Approx. 65 bar Steam Temperature (Design): Approx. 480–520 °C Operating Mode: Condensing turbine with surface condenser (extraction capable) Exhaust System: Shell and tube surface condenser Technical Features: Curtis con ...

Manufacturer: Stalam, Type: RF 30, Year: 1996, Control: Programm, Working widht mm: 1350, Working hight mm: 100, Frequency of generators MHz +/-: 27,12, Conveyor lenght mm: 11000, Feedin speed m/min: ca. 7, Belt conveyor: yes, Generator 1 kW: 30, Generator 2 kW: 30, Fan inside the dryer: yes, Cooling unit at the out-feed: yes, Cooling of gernators by air: yes, Year :1996

Used ILLIG STAL80 Trim Press, age 2004:-, Technical data ILLIG STAL 80 :, Punching table area max. 1000 x 510 mm, Material width max. 800 mm, Infeed length 20 - 400 mm, Stroke height 200 mm, Mold height 272 mm, Part height (positive and negative) max. 100 mm, Number of strokes (infinitely variable) 25 - 130 /min, Trimmed Parts are stacked through the Punch Tool, The Skeletal Waste is fed directly into the Grinder, Punching pressure 20 000 daN, Drive capacity 4.16 kW, Servomotor Indexing of sheet, Laser control Technology for v. low tolerances in the difference in the Hole Punch Position, ILLIG RS75 Under the Trim Press Grinder, Motor 8.3 kW, Condition: v.good, Condition: v.good

As good as new, as never used before

VERTICAL PLATE FREEZER, DYBVAD STÅL INDUSTRI, TYPE: V-4-16 Technical description: Refrigerant: R22 / R502 / R717 Temperature range: - 40 ° C / + 40 ° C Blocks number: 16 or 32 blocks Block size (16x): 820 mm x 76 mm x 800 mm Block size (32x): 390 mm x 76 mm x 800 mm Total dimensions: 2300 x 1400 x 1400 mm

Spare welding controllers for resistance welding machines MPS 100mono MPS 100monoR1 MPS 100multi MPS 100multiR1

Transnorm Rising falling Incline with arch belt conveyor GF 6200-800-900-800 RA2180 Technical data: Conveyor length (NL): 7000 mm (6200 mm incline + 800 mm arch) frame width (NB): 900 mm, 1000 mm with motor belt width (GuB): 800 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DRE80M4BE1/MM15/LN Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed controll Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 7000 ( 6200 + 800 ) Nominal / outside width ...

Caljan telescopic roller conveyor 600-5/6.5 RA2166 Base part with 2 manualy retractable telescopic elements. The telescope can be moved in or out with a crank handle on the take-off side. Attention: ONLY for trucks loading Type: 600-5/6.5 Year of manufacture: 1998 Condition: functionally tested faultless optical: minimal traces of use fixed part with double supports: 400 mm hight Telescope elements 2 pieces: manualy retractable and extendable Telescope extension/retraction: crank handle on operator take-off side Accumulating effect: accumulating with slope Technical data: Staionary part Length: 5000, +6500 mm extention Part Roll width: 600 mm Outside width: 930 mm Height 1 transfer: 400 mm - Feeding e.g. via belt conveyor on customer side Rollers galvanized and plastic: d = 50 mm Roller pitch super narrow: RTLG = 65 mm Protective cover: bottom complete Operation/crank handle: front side  ...

1 mixing arm with bottom discharge screw all stainless steel right-left turn 1 speed dimensions (l x w x h) : ± 2.500 x 1.050 x 1.700 mm with new control box + control (Siemens logo) all new cables

Cell wheel lock made of noble steel unused KREISEL Environmental Technology Type: ADG 630 x 800 x 21-24 Z Built: 2005 Inlet opening: approx. 800 x 500 mm Outlet opening: approx. 800 x 500 mm Cell wheel diameter: 630 mm Number of cells: 12 Cell depth: approx. 200 mm Cell wheel made of stainless steel Housing made of steel Geared motor : SEW-EURODRIVE Type :RF107 AR132S/MWEX/II3GD DV132M4/TFII36D 7.5 kW 24 rpm 230/400 V IP65 Motor Ex protected! Total dimensions: approx. 2700 x 800 x 800 mm

For sale we offer new scissor roller conveyor. Roll width 610mm Length retracted 3000mm Length extended 8000mm Height 690-1000mm Load capacity 130kg/m Available quantity: 2 pieces Other lengths available in stock: 4 and 10m Shipping worldwide Price per piece 6.700€ net plus VAT If you are interested, please contact us to confirm availability.

For sale we offer new scissor roller conveyor. Roll width 760mm Length retracted 3000mm Length extended 8000mm Height 690-1000mm Load capacity 130kg/m Quantity available: 1 piece Other lengths available in stock: 4 and 10m Shipping worldwide Price per piece 7.100€ net plus VAT If you are interested, please contact us to confirm availability.

Sinumerik 805 SM-TW with plug-in cards, New!, New, Siemens, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Sinumerik 805 SM-TW, consisting of: 1 piece Sinumerik basic rack, 805 SM-TW, 6FM2805-1WB00, 1 piece battery plug-in unit 6FX1410-0CX46 1 piece Sinumerik power supply, 6EW1861-3BA, 1 piece Sinumerik CPU, 6FX1138-5BB04, 1 piece Sinumerik basic memory module, without RAM, 6FX1128-1BA00 - sold! 1 piece Sinumerik 805 SM T/W software, 6FX1882-0BX22-4D, 1 piece Sinumerik 805 SM T/W basic software module 1, 6FX1882-0BX01-4D, Attention: All parts are new! These prices are absolute best prices and are only valid for the purchase of the whole position. We also sell the parts individually, see separate Ebay listings.  ...

Height rippler, parallel rippler -Max. working height: 800 mm -Price: per piece -Quantity: 2 pieces -Dimensions: 380/90/H855 mm -Weight: 7.5 kg

BOEHRINGER VDF V 800 universal lathe was built in 1977 in Germany. The machine, designed for precision machining of workpieces with a maximum diameter of 800 mm and a length of 1500 mm, is distinguished by its robust construction, which ensures excellent stability during even the most intensive challenges. On the other hand, the spindle features an optimised speed range, allowing efficient turning using both high-speed steel and carbide-tipped tools. All of this makes the BOEHRINGER lathe the perfect choice for both unit and series production. The total weight of the machine is approximately 5400 kg. Technical specifications of the BOEHRINGER VDF V 800 metal lathe - maximum turning diameter above the bed: 800 mm - maximum turning diameter over the slide: 515 mm - maximum turning length: 1500 mm - maximum spindle rotational speed: 1120 rpm - minimum spindle rotational speed: 5.6 r ...

Extruders 65-50-50 mm. diam.screws, K DESIGN thickness control, Double collection of 1.800 mm., Average throughput rate 200-240 kg/h, total installed power 350 kw, compressed air consumption 330 l/min, water consumption 10 l/min, air pressure 6-7 bar, min-max line speed 0-150 m/min, motor power 234 kw, resistive power 25 kw, reduction ratio 1/6, ac motor revolutions standard 2300 rpm, Cartridge filter changer, power 6.75 kw, Resistive power 32.6 kw, Die diameter 220 mm, Bubble cooling group, Electric fan power 22 kw, RV ironing motor 2.7 kw, Platform rotation 0.4 kw, Diagonal fans 0.75 kw, Speed ​​0-150 m/min, Double winder with calender, Total motor power 6kw, Min./Max. diameter of reels 150/900 mm, Max. reel weight 750 kg, installed power - used power in work: about 60-65% : 350, capacity: 200-240 kg/h, working width: 1.800 mm.

TRIA GRANULATOR, (machine offered totally reconditioned - photos taken before reconditioning), Series 80-49 DN Rotor width 800 mm. diam.450 mm. 45 kw motor Granulation chamber 840 x 490 mm. Complete with conveyor belt Feeding hopper N.3 screens available (9-15 mm) Control panel The machine is offered TOTALLY RECONDITIONED, See how we recondition [HERE](.germanplast.eu/pages/photo-gallery), INSTALLED POWER: 45 kw, rotor size: 800x450 mm.

2025 BIG backhoe bucket 80cm with MS03 Symblock attachment, Technical specifications:, - Weight: 191 kg, - Recording width: 80 cm, - Contents: 278 liters, - CAT 4 - suitable for 4.0 - 5.5 t excavators

Doka Box 1.20x0.80m Storage and transport box Doka box 1.20 x 0.80m Storage and transport Box

Linear slide, toothed belt axis, stroke 800, EGC-185-800-TB-KF-0H-CK, 556817, Festo, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used part! The part was purchased from a spare parts warehouse of a company, is in a very good condition and fully functional. Festo linear slide, toothed belt axis, EGC-185-800-TB-KF-0H-CK, 556817, Festo, second-hand Overall dimensions: 1143x190x170mm, approx. 65kg Table 280x110mm, stroke 800mm, bore for drive shaft 32mm Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of t ...

Vertices: • Transformer from a well-known German manufacturer • Currently stored directly at the manufacturer – no waiting for production • Fast and uncomplicated delivery • Ideal for time-critical applications or ongoing projects • Manufacturer's warranty is 5 years (starting 01.06.2025)

Glass scale, glass measuring stick, scale, digital display, measuring stick, length measuring system, length measuring device, linear scale, position indicator, digital scales, digital scale for digital display, linear encoder, displacement transducer -Manufacturer: Sfernice, linear displacement transducer -Measured length: 800 mm -Dimensions: 1000/35 / H60 mm -Weight: 1.3 kg

AGFA AccuSet 800 with AGFA Viper Rip. System is completely tested and cleaned. Resolutions: 1200, 1800 and 2400 dpi - the system is complete and includes accuset, supply & recording cassette, APIS cable, CD's, software and dongle. Includes Techkon film densitometer. We will be happy to send you further information and pictures. Available now

Wolf cooking kettle with mixing work steam-heated approx. 800 to 900 litres of volume outlet DN 100 at the side

used, kpl. 1 year warranty, plate size 800 x 800 mm, 95 plates, closed drain ( 4-hole), 30 mm cake thickness, pressure 15 bar, capacity approx. 1350 liters, filter area 95m2, dimensions 7500 x 1300 x 2000 mm, weight approx. 7 to

used, kpl. 1 year warranty, plate size 800x800 mm, 50 plates, open drain, 25 mm cake thickness, pressure 15 bar, capacity approx. 660 liters, filter area 53m2, dimensions 5500 x 1600 x 1200 mm, weight approx. 5 to

used, kpl. 1 year warranty, built in 1994, plate size 800x800 mm, 60 plates, open outlet, 25 mm cake thickness, pressure 15 bar, capacity approx. 800 liters, filter area 64m2, dimensions 5500 x 1500 x 2200 mm, weight approx. 6 to

Used chamber filter press / filter press Rittershaus & Blecher / R & B 800 x 800 Plate size: 800 x 800 mm Chamber number: 100 pieces Filter pressure: 15 bar

Standard

Hydraulic Type Manufactured by Angelo Cremona Maximum Diameter 800 mm Minimum Diameter 120 mm

Very good condition, like new. We plan and build the whole plant exactly for your needs. Are you looking for something else? Write us below!

Filter cloths for chamber filter press 800x800, 1000x1000, 1200x1200 and other formats from overproduction

; ready

Thank you for your interest on our machines, we like this may offer you: Manufacturer: Sandeep Singh Model: KSF 800 marzipan & nougat transformer Year of construction: 1977 Working width: 800 mm Capacity: á 20mm - article 8 g - 180 kg /. Electr. Values: 230/400 V, 50 Hz Details: - with 17 different form rollers (!) -Suitable for large production volumes -Plastic rollers with steel core -Stepless speed control -with prior extruder and feed conveyor -For Marzipan and nougat mass We offer this machine "as available" without any warranty/warranty claims or representations for sale. from stock Hess. Lichtenau; bulk

If mobile chamber filter press / used filter press Filox 800 x 800 construction year: In 1980 record format: 800 x 800 mms benefit length: 5,200 mms chamber number: 88 pieces cake thickness: 25 mms filter pressure: 15 cash Schliessdruck: Min 300 cash, max. 320 cash whole filter surface: approx. 98 square metres cake volumes ges .: approx. 1,100 litres engine tension: 380 V, 50 hertz protective kind: IP 44 record material: PP expiry: openly service side: on the left cloths: Optionally

As a standard solution in the field of vibration screening machine, we offer our VS series, whose complement individual solutions can be worked out. This is made possible by our modular system. You can buy the technology so exactly, that you actually need in daily practice. As well, our machines of the VS series are characterized by constructive benefits as well as simple retrofit solutions. AREAS OF APPLICATION Dry and wet sieving Protection and control screening Dust removal Drainage FACILITIES 1 to 3 of sieve decks internal and external screen frames Size: 800 screen diameter OPTIONS Ball tap cleaning Ultrasonic cleaning Crossing facilities flexible hoses Quick release skewers Special enemas or special outlets ATEX

Used chamber filter press / filter press Rittershaus & Blecher / R & B AEH 800 x 800 Plate size: 800 x 800 mm Useful length: 3500 mm Chamber number: 64 pieces Cake thickness: 20 mm Filter pressure: 15 bar Closing pressure: Min. 240 bar / max. 300 bar Total filter area: 64 m2 Cake volume totalling: 640 litres

2 pcs. Siemens 800 ampere 1 pc. Merlin Gerin 2000 Ampere As good as new !

As a complement to our standard solution of the VS series we offer our VD vibration screening machine for protection from screenings with Central infeed and discharge. Here, too, individual solutions and supplements can be developed. This is made possible by our modular system. You can buy the technology so exactly, that you actually need in daily practice. Our machines of the VD series is also characterized by constructive benefits as well as simple retrofit solutions. AREAS OF APPLICATION Dry and wet sieving Protection and control screening Dust removal Drainage FACILITIES 1 to 2 of screen decks internal and external screen frames Size: 800 mm filter diameter OPTIONS Ball tap cleaning Ultrasonic cleaning Crossing facilities flexible hoses Quick release skewers Special enemas or special outlets ATEX

used membrane chamber filter press / filter press Netzsch 800 x 800 mix parcels record size: 800x800 mms cake thickness: 32 mms benefit length: 4,768 mms filter surface: 34m? filter pressure: 15 bars record transport: automatically the arrangement is in a very good state.

TYPE: DIRECT, BILLET DIA.: 90 MM, LENGTH: 400 MM

<br>8 stations 7 investors P 15 Bulletin station Trimmer Trimmer HT 15 Stacker RS 10<br><br>Still in operation: No.<br>Available: immediately

ZKG tanks / storage tanks / tank / pressure tanks in V2A with cooling jacket and insulation Operating pressure: 3.0 bar test pressure: 4.0 bar Capacity: 2,800 litres NEW! Surface: inside and outside 2B = IIIC material: V2A (AISI 304) 1.4301 Top shelf: â?¢ with 2 loops â?¢ with threaded weld NW 25 â?¢ with CIP cleaning NW 40 â?¢ with below drawn pipe DN 32 with fermentation sheet pile valve (with pressure relief valve, with pressure gauge)(gegen Aufpreis) Tank cylinder: â?¢ with wire hook up â?¢ with manhole oval 430 x 330 mm, with handle â?¢ with cooling jacket H = 750 mm and with insulation â?¢ with test valve DN 15 with spiral in V2A (extra charge) â?¢ with Tauchschafthülse with temperature display (extra charge) â?¢ on the back of the tank 2 x connecti ...

Used chamber filter press / filter press Rittershaus & Blecher / R & B 800x800 Plate size: 800 x 800 mm Useful length: 3500 mm Chamber number: 64 pieces Cake thickness: 30 mm Filter pressure: 15 bar Closing pressure: min. 380 bar / max. 440 bar