stainless tank used for sale

Stock number: F619, Liter: 250, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Silo, Standing: On leg rack with 4 pcs. of wheels, Conveyor: In the bottom, W 300 x L 750 mm.

Stock number: F679, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tube sealer, Construction: For sealing of plastic tubes, Welding width: Max W 75 mm., Manufacturer: Arenco, Type: GAP, Other: Excl. traction station

Stock number: F713, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Flow rate meter, Standing: On a rack, Manufacturer: Fischer & Porter

Stock number: F742, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Alu seal welder, Construction: 4 holes circular table model - Semi-automatic, Motor: 600 W heating coil - 220 Volt, Manufacturer: Trepko, Other: Ellipse tooling, L 115 x W 72 mm.

750 litre, Stock number: T1267, Litre: 750, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Vat, Standing: 4 pcs. wheels, Top: Open, Dimensions: L 1500 x W 1000 x H 500 mm.

350 litre, Stock number: T1354, Litre: 350, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Trough, Lying: On legs, Dimensions: L 4080 x W 400 x H 450 mm., Other: With wall mountings

250 litre, Stock number: T1517, Litre: 250, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Trolley, Standing: On 4 pcs. of rubber wheels, Top: Open, Dimensions: L 1040 x W 620 x H 960 mm., Other: Handle at the top

1.000 litre, Stock number: T1020, Litre: 1.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Vat, Lying: In painted rack with wheels, Top: Open with lid, Agitator: From bridge at the top, Dimensions: L 1200 x B 1000 x H 1100 mm.

Stock number: F744, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Auger filler, Hanging: In stainless rack, Construction: Inlet hopper L 210 x W 220 mm., Bottom: 4 x screws, L 220 x W 80 mm. outlet., Motor: 0,75 kW - 62 rpm.

Stock number: F837, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tube sealer, Construction: For sealing of plastic tubes, Welding width: Max W 75 mm., Manufacturer: Arenco, Type: GAP, Other: Excl. traction station

Stock number: F841, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Filling nozzle, Construction: Ø 18 x L 330 mm. with clip, Other: Air driven

Stock number: F891, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 4 pcs., Item: Filling nozzle, Construction: Ø 21 mm. outlet with pneumatic clip, Inlet: 1 ½, Other: Mounted on angle brace

Stock number: F977, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Unscrambler, Construction: Erecting of plastic bottles etc., Motor: Variable speed, Manufacturer: Groninger, Type: ZSB 600

550 litre, Stock number: T1035, Litre: 550, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Vat, tiltable, Standing: On legs, Top: Open, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Inner diameter: Ø 1000 mm., Dimensions: W 1700 x H 1200 mm., Other: Manuel tilt

Stock number: F893, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 3 pcs., Item: Tube filling machine, Chamber: 375 ml., Filling head: Ø 13 mm.

Stock number: F976, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Unscrambler, Construction: Erecting of plastic bottles etc., Motor: Variable speed, Manufacturer: Groninger, Type: ZSK 1500

9 litre, Stock number: T1024, Litre: 9, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Mixer, Top: Open top, with lid, Bottom: Dished bottom, Agitator: Yes, Agitator type: Vertical frame agitator, Inner diameter: Ø 220 mm., Dimensions: L 220 x H 325 mm., Other: Excl. motor

Stock number: F978, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Unscrambler, Construction: Erecting of plastic bottles etc., Motor: Variable speed, Manufacturer: Groninger, Type: ZSK 1500

2.000 litre, Stock number: D244, Litre: 2.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Cheese vat, Standing: On legs, Top: Open, Double jacket: Yes, Outer cladding: Fully welded stainless, Agitator: Yes, Agitator placement: In the top from brigde, Other: Cheese sieve

Stock number: F995, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 3 pcs., Item: Vibrator weigher, Construction: For weighing of powder, granulate etc., Dosage: 0-200 g., Manufacturer: Zeuya, Type: MG 200

New 5.000 litre tank,, stainless steel AISI 304,, closed top, standing on 3 pc. legs., Conical top and bottom 15°,, tank cover in the top Ø 450 mm., Ø 1” pipe in the top centre,, Ø 4” pipe in the top,, Ø 2” pipe in the bottom centre., The tank is made of pickled plate type B2., All weldings on the inside grinded grain 60., All weldings on the outside sandblasted., Tank dimension Ø 2000 x cylinder 1500 mm., Density: 1,0., Working temperature: 0 - +50°C., Working pressure: None, Scope of application: A, Litre: 5.000, Material: Stainless steel AISI 304

Stock number: F872, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Rinser, Standing: In stainless cabinet with safety shield, Construction: Carousel type, Stations: 9 pcs., Capacity: 3600 bottles/hour, Manufacturer: Promec Evolution, Type: 15+1A.3.9.251, Year: 2007

Stock number: F996, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Construction: Air driven with foot switch, Filling head: 1 pc., Piston dosage: 13-130 ml., Manufacturer: Würschum, Type: H 130

GT-5374 Two Stainless Steel Bathtubs - Stainless steel - For 2.85 meter pipe each tub

Stainless steel vacuum vessel with EKATO FLUID Mixer TYPE FGL-25D (mixer new 2005) vessel 1370 Ltr, vacuum -1/0,5bar, maximum allowed Work Temp 110C

Stainless steel vacuum vessel 1370 Ltr, vacuum -1/0,5bar, maximum allowed Work Temp 110C , down two outlets DN50, mounted on stainless steel frame 1220x1020mm total height 2800mm

ATEC 1220 Ltr stainless steel vessel with anchor stirrer with scrapers (5,5kw), jacket 250 Ltr, two heaters (2x7,5kw), inlet/outlet DN50, for atmospheric pressure, control cabinet, speed controlled stirrer, on wheels

Diessel stainless steel vessel 170 Ltr. with propeller stirrer and heating for oil phase, works on atmospheric pressure, on wheels, down outlet diameter 26mm

VALOREL Stainless Steel Vessel 620 Ltr. with propeller stirrer, allowed pressure 2,5/-1bar, max. temp 150C , on top there is a inlet 50mm for clamp connection, down outlet valve diameter 2"

ARSILAC Stainless Steel Vessel 1000 Ltr. CUVE INOX 304

Closed stainless steel butter silo. Single jacketed. Vacuum on the silo is possible (manometer 0 / - 1,0 Bar). The horizontal buffer silo is equipped with 2 augers (driven by 1 main motor of +/- 3 kW - 380 V - 50 Hz - 1.420 rpm - n2: 14 rpm, no nametag on motor, only on drivework). Total capacity: 3.000 kg. Manhole, round, on one side and a sight glass on the same side. 1x infeed possibilities for direct connection of the outfeed pipe from a Continuous Butter Machine (CBM) on the back side and one on the side of the QHK butter silo (DN100). CIP cleanable with spraybowl in the top. Outfeed plate with 1x rectangular flange and 1x round DN100 flange on the outfeed of the silo. Excluding control panel or outfeed butterpumps., Type of Machine: Buttersilo, Capacity: 3.000 kg, Motor: +/- 3 kW - 380 V - 50 Hz - 1.420 rpm - n2: 14 rpm, Dimensions: ± 275 x 200 x 225 cm, Weight: ± 1.500 kg

Hanging cabinet HS 1000 with sliding door Used device cleaned Dimensions: 1000 x 400 x 600 mm, WxDxH with intermediate floor

Stock number: F1127, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Unscrambler, Standing: On legs, Construction: Erecting of bottles etc., Dimensions: L 2350 x W 1100 x H 1550 mm., Conveyor: Plastic lamella, Conveyor dimensions: L 1300 x W 82 mm., Manufacturer: M. S. Packaging, Type: FLR 1000, Year: 1999

Item No. Z-HF63-WH - 30 cm rack with 30 plates - As good as new device, built in 2022 - Total Trubraum approx. 249ltr. - Total filter area approx. 19.5m² - With electric hydraulic pump - without feed pump - Connection thread DN50 DIN 11851 - with monofilament cloths and end cloth - 1 year functional warranty

Auction-ID: A7-45162-12

Stainless steel, VA, chrome-nickel steel, material cuts, stainless steel, chrome steel, rust-free -Material: cutting and manufacturing -Round steel, tubes and sheets -different materials: in stock -Material numbers: 4301, 4541, 4571, 1.4828, 1.4876, 1.4841, 1.4878 -Please ask for the material you want with the dimensions. -Price from: per kg and cut depends on material

Conveyor belt, belt conveyor, conveyor belt, belt conveyor, conveyor belt -Body: made of stainless steel -1x conveyor belt speed: 16 m/min -1x conveyor belt speed: 8 m/min -Drive: 0.55 kW -Transport belt: with carrier -Belt width: 695 mm -Length: 4500 mm -Number: 2x conveyor belts available -Price: per piece -Transport dimensions: 4550/1000/H1630 mm -Weight: 450 kg

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor - Execution: stable -Drive motor: SEW Eurodrive 0.3 / 1.3 kW -Speed: 12/51 rpm -Case: stainless steel -Conveyor screw: O 150 mm -Trough width inside: 170 mm -Screw: steel / stainless steel, higher torque -Dimensions: see technical drawing in the photos -Transport dimensions: 2960/300 / H600 mm -Weight: 154 kg

Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box made of: stainless steel -Stuffing box for: Ø 38 mm shaft -for: gland tape -Price: per piece -Number: 8 pieces -Dimension: Ø 101 x 45 mm -Weight: 1 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers -Diameter roller: 50 mm -Transport roller width: 265 mm -Total length: 310 mm -Socket: Ø 14 mm -Wrench size: 12 mm -Number: 30 rolls available -Price: per piece -Weight: 0.9 kg/piece

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Material: 1.4408 stainless steel -without: drive -Connection: DN50 -Width: 152 mm -Nominal pressure: PN40 -Number: 1x valves available -Price: per piece -Weight: 9.69 kg/piece

Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box: made of stainless steel -Stuffing box: for Ø 60-62 mm shaft -for gland tape -Number: 19x glands available -Price: per piece -Dimensions: 147/147/H70 mm -Weight: 2.8 kg

Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box: made of stainless steel -Stuffing box: for Ø 40 mm shaft -for gland tape -Number: 3x glands available -Price: per piece -Dimensions: 145/145/H66 mm -Weight: 3.1 kg

Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box: made of stainless steel -Stuffing box: for Ø 50-52 mm shaft -for gland tape -Number: 8x glands available -Price: per piece -Dimensions: 144/144/H68 mm -Weight: 2.9 kg

Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box: made of stainless steel -Stuffing box: for Ø 70 mm shaft -for gland tape -Number: 2x glands available -Price: per piece -Dimensions: 155/155/H71 mm -Weight: 3.9 kg

Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box: made of stainless steel -Stuffing box: for Ø 95 mm shaft -for gland tape -Number: 2x glands available -Price: per piece -Dimensions: 180/180/H82 mm -Weight: 6.6 kg

Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box: made of stainless steel -Stuffing box: for Ø 90 mm shaft -for gland tape -Number: 2x glands available -Price: per piece -Dimensions: 175/175/H80 mm -Weight: 6 kg

Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box: made of stainless steel -Stuffing box: for Ø 110 mm shaft -for gland tape -Number: 2x glands available -Price: per piece -Dimensions: 205/205/H84 mm -Weight: 8.5 kg

Disinfectant wash basin, hand wash basin, wash basin -Premo Aquadator: -Multifunctional: cleaning station -With MISCEA sensor fitting: with integrated soap and disinfection dispenser -With hygiene unit: -Stainless steel: sink -Basin height: 920 mm -Dimensions: 700/670/H1565 mm -Weight: 98 kg

Shredder system, single-shaft shredder, shredder, chipper, cutting mill, single-shaft crusher, rotor mill -Shredder system: completely made of stainless steel, for frozen meat or other -Motor power: 4 kW -Speed: approx. 60 rpm -Number of cutting knives: 10 pieces -Dimensions cutting blade: 250 mm -Filling spout 500 x 895 x H480 mm -Dimension 880/1390/H2060 mm -Weight 640 kg