129,495 used machines on RESALE, but how to find them? Machine Search
TPJ800 Roller Compactor 1000kg 75HZ Iron Iron Koop Diesel Engine Auction-ID: A1-45995-20
TPJ800 Roller Compactor 1000kg 75HZ Iron Iron Koop Diesel Engine Auction-ID: A1-45995-21
Conveyor system, TGW, NB 420mm, approx. 1,100m, – used - Ex-site price (net): now only 99.000.-€ instead of 269.000.-€ dismantled, packed and loaded, incl. control, feet etc.! Manufacturer: TGW Year of Make: 2016 Condition: good Available: immediately Location: Niedernberg warehouse Here is an excerpt from Hall 2: approx. 42 pieces Type: KRC KingDrive Roller Conveyor A and T Nominal width (NB) 420mm Roll pitch: 110mm Zone length: 990mm Number of KDR's per zone: 2 pieces Type Roller: Steel Conveying speed: different e.g.: .0.47m/s, Acceleration / deceleration: 1.5 m/s In different versions As above only approx. 38 pieces Type: KRC KingDrive Roller Conveyor A and T Zone length: 660mm As above only approx. 4 pieces Type: KRC KingDrive Roller Conveyor A and T Zone length: 880mm 800mm = approx. 8 pieces 770mm = approx. 3 pieces 412.5mm = appr ...
Without BATTERY Auction-ID: A7-46412-75
Drawer cabinet filled see pictures Auction-ID: A7-46460-644
Drawer cabinet with contents See pictures Auction-ID: A7-46460-574
Auction-ID: A1-46501-1583
Capacity: 290 liters. Equipped with spoon insert Auction-ID: A1-40137-377
Holzmann, Panel Trolley PW1000 Auction-ID: A1-46501-86
Includes cabinet with tools Auction-ID: A1-41995-152
Holzmann, Panel Trolley PW1000 Auction-ID: A1-46501-171
Not tested; Auction-ID: A7-46458-210
Is about model of 100cm width. Auction-ID: A3-43529-13012
Worked perfectly before being put into storage 2 years ago. Auction-ID: A3-43529-36042
Not tested; Auction-ID: A7-46458-214
In blue carrying case
Flat bar bending machine Flat bar 100 x 5 mm Square steel 16 x16 mm Round steel 18 mm Angle steel 100 x 8 mm Dimensions L x W x H 400 x 290 x 280 mm Weight 35 kg
Control: Fanuc 0i-MD Cutting time: 2011 hours - X-axis: 1000mm - Y-axis: 550mm - Z-axis: 500mm - Spindle distance to table: 130 ~ 630mm - Table size: 1100mm x 502mm - Max. part weight: 700kg - Spindle speed: 10.000 tpm - Spindle taper: BT-40 - Spindle motor power: 11kW - Positions on tool magazine: 24
Machine is equipped with: - chip conveyor - through spindle coolant - 30 positions ATC - Nikken 4th& 5th axis
Milling machine with - Heidenhain TNC 135 - Rapid traverse - Milling head with hydr. Tool sparing - Coolant system - Central lubrication x-travel 1000 mm y-travel 450 mm z-travel 450 mm Table clamping area 1370 x 400 mm Number of T-slots 5 pcs. Spindle speeds: 32 - 1500 rpm Tool holder SK 50 Total power requirement 7.0 kW Machine weight approx. 3.1 t Dimensions L x W x H 2.1 x 1.7 x 1.9 m
Serial number: 042-024/51 Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220/60V Connection: 17 kW Nominal current: 80 A Nominal force: 1000 kN Operating pressure Speed: 200 mm/s Plunger stroke: 500 mm Projection: 360 mm Maximum distance between table and plunger: 800 mm Table dimensions: 900 x 560 mm
MIG 100 welding machine including welding wire - welding helmet - steel brush
Length 125 mm Width 100 mm Height 70 mm Diameter round - mm Condition: never used / new (5)
3 machine vices – mechanical – BB 100 / 125 / 160 mm Three machine vices in robust design. The vises are identical in construction, differing only in the jaw width. Design: Mechanical machine vices Solid cast design Parallel clamping jaws Spindle actuation Fixed machine holder Suitable for milling and drilling machines Vise 1: Jaw width 100 mm Vise 2: Jaw width 125 mm Vise 3: Jaw width 160 mm
with feed device Nominal force: 1000 kN Pneumatic pressure: 5 bar Permissible delay time: 210 ms Safety distance Tool operation: 336 mm Continuous stroke (interchangeable pulley): 50/80 rpm Single stroke: 45 rpm Working capacity in continuous stroke: 3500/5000 Nm Torque: 25,000 Nm Drive power: 11.5 kW with control panel and digital display CPS 20 with support frame
Robust smoothing mill with a roll diameter of 1000 mm and a roll width of 800 mm, including drives and auxiliary drives. Current residual sheath thicknesses: 80 mm / 85 mm. Optionally available: 1 set of new roller shells.
maximum number of results exceeded
please refine your search
150 € 
