stahl 100 used for sale

Micrometer, micrometer screw, measurement of tooth width, plate measuring surfaces -Measuring range: 100-125 mm -One revolution of the drum corresponds to: 0.5 mm -without locking device -large measuring areas -Measuring force: ratchet -Including case Setting mass -also other sizes available -Weight: 1.0 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 22 mm / 90° -Dimensions: see photo technical drawing -Dimensions: 100/25/H21 mm -Weight: 0.3 kg

Tool holder, turning tool holder, tool holder, turning tool, turning tool holder -Dimensions of perforated plate: see pictures -Dimensions: 175/165/H65 mm -Weight: 6.6 kg

Marking prism, test prism, prism, angle prism, mounting angle, mounting prism, mounting cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 46 mm -Dimensions: see photo technical drawing -Dimensions: 100/60/H49 mm -Weight: 1.7 kg

We sell large post steel pipes DN 1000 encased, coated inside, wall thickness 14.8 mm, very good condition. Lengths between 4-18m.

clamping plate, welding table, welding table, surface plate -Clamping plate: is steel -Width: 1000 mm -Length: 1000 mm -Height: 820 mm -Plate thickness: 50 mm -Plate is on: steel frame -Quantity: 1 piece available -Transport dimensions: 1000/1000/H820 mm -Weight: 466 kg

Clamping plate, welding table, welding table, straightening plate -Width: 1000 mm -Length: 1000 mm -Height: 780 mm -Surface: milled -partly with threaded holes -Plate thickness: 25 mm -with supporting ribs -Weight: 214 kg

Clamping plate, welding table, welding table, straightening plate -Width: 995 mm -Length: 1000 mm -Height: 800 mm -with supporting ribs -Weight: 170 kg

Depth gauge, dial gauge, depth gauge, depth caliper, caliper, vernier caliper -Measuring range: 0-100 mm -Fine-tuning -long measuring jaws -Transport box -Dimensions: 365/180/H40 mm -Weight: 1.15 kg

Crane block, crane hook, load hook pulley, rope pulley, steel rope pulley, rope pulley, crane -Payload: 1000 kg -Dimensions: 450/210/H90 mm -Own weight: 9 kg

number of feeders: 6 max. speed: 9000 /h max. paper size: 31,1 x 35,5 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Beam width: 100-150 mm -Payload: 1000 kg -Number: 1x drives available -Price: per piece -Dimensions: 370/405/H340 mm -Own weight: 47 kg

number of feeders: 4 max. speed: 9000 /h max. paper size: 31,1 x 35,5 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping plate, welding table, welding table, straightening plate -Width: 1000 mm -Length: 1295 mm -Height: 910 mm -Plate thickness: 28 mm -Wall thickness underframe: 5 mm -Transport dimensions: 1450/1000/H1100 mm -Weight: 570 kg

Clamping table, clamping angle, milling machine table -Clamping angle: for workpiece clamping -Height: approx. 500mm -Groove width: 22 mm -Dimensions: see photo techn. drawing -Number: 2x clamping angle available -Price per piece -Dimensions: 235/100/H500 mm -Weight: 8.9 kg/pc.

Clamping table, clamping angle, milling machine table -Clamping angle: for workpiece clamping -Height: approx. 500mm -Number: 1x clamping angle available -Price per piece -Dimensions: 220/100/H500 mm -Weight: 12,8 kg/pc.

Wire rope, steel rope, nylon rope, ship rope, rope line -Steel cable/rope: with loops -Steel cable: Ø27 mm, length 13 m -Nylon rope: Ø 100 mm, length 4 m -Price/delivery: complete -Transport dimension: 1400/1100/H340 -Weight: 132 kg

rack, toothed rail -Rack: Toothed rail, straight teeth -Length: 1000 mm -Width: 60 mm -Height: ha 60 mm -Module: 6 (see photo) -Dimensions: 1000/60/H60 mm -Weight: 25.1 kg

Gratings, gratings, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating steps, steps -Grid step: 1000 x 270 mm -Total height: 70 mm -Struts: wall thickness 2 mm -Bridge height: 34/7 mm -Gratings: Hot-dip galvanized -Quantity: 1x grates available -Weight: 7 kg

Gratings, gratings, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating steps, steps -Grid step: 1000 x 310 mm -Total height: 70 mm -Struts: wall thickness 3/2 mm -Bridge height: 30/7 mm -Gratings: Hot-dip galvanized -Quantity: 1x grids available -Weight: 8,3 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 160 mm -Clamping depth: max. 100 mm -Dimensions: 460/170/H120 mm -Weight: 40 kg

Pipe clamping system, clamps for butt welding machine, butt welding machine, mirror welding machine, pipe welding machine, assembly device for pipes -Capacity: 100-400 mm -Double clamping device: for pipe mounting -Dimensions: 1000/450/H260 mm -Weight: 22 kg

Plastic chain conveyor, conveyor belt, belt conveyor, transport belt, belt conveyor, chain conveyor -Drive geared motor: 0.37 kW -Belt width: 700 mm -Length: 1000 mm -Speed: 9.1 m/min -Dimensions: 1100/1000/H200 mm -Weight: 136 kg

Clamping plate, welding table, welding table, straightening plate -Width: 750 mm -Length: 1000 mm -Height: 850 mm -Surface: milled -partly with threaded holes -Drawer -Plate thickness: 30 mm -with supporting ribs -Weight: 256 kg

SAMMELHEFTER STITCHING MACHİNE ST 100, 6 STATION OHNE UMSCHLAGSTATION

Gratings, gratings, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating steps, steps, perforated gratings -Grid level: perforated grid 1000 x 270 mm -Total height: 75 mm -Holes: Ø 7/13 mm -Gratings: Hot-dip galvanized -Quantity: 2x grids available -Price per piece -Weight: 7 kg/piece

Gratings, grating, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating step, step, perforated grating -Grating level: perforated grating 1000 x 300 mm -Total height: 70 mm -Holes: Ø 7/13 mm -Gratings: hot-dip galvanized -Quantity: 1x piece available -Weight: 7.2 kg

Gratings, gratings, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating steps, steps -Grid step: 1000 x 265 mm -Total height: 70 mm -Struts: wall thickness 2/2,5 mm -Bridge height: 30/10 mm -Gratings: Hot-dip galvanized -Quantity: 3x grids available -Price per piece -Weight: 7,7 kg/piece

Shelving trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelving, support arm trolleys -Magazine trolley: for open-fronted storage bins, double-sided -Both sides: 90 boxes / total 180 boxes -Swivel castors: with parking brake -Dimensions: 1000/500/H1690 mm -Weight: 70 kg

Description High-performance package delivery Heidelberg Stahl Twinstacker TSH-100 from 2011 -Ideal for one-man operation on folding machines with high machine speed up to 18,000 cycles -MCT control -Mark-free laying out up to three panels, with user-friendly ergonomic removal -max. format 1000x340mm -min. format 100x100mm -Product thickness max. 6mm -Stacking height per level max. 10cm

Falzmaschine - Folding Machine Stahl T 36/6-6-KB Baujahr / Year 1997 Flachstapelanleger / Flat Pile Feeder Falztyp: 6 Taschen - 6 Taschen - Schwert Folding Type: 6 buckles - 6 buckles - 1 knife Format / Size: min. 80 x 100mm - max. 360 x 650mm Papiergrammatur / Paper weight: 40 – 250g/m² Stapelhöhe / Pile height max. 580mm Geschwindigkeit / Speed min. 10 m/min. - max. 160m/min. Durchmesser Falzwalzen / Diameter of folding rollers 32mm Auslage Schuppenauslage / Delivery Stream Delivery Kompressor / Compressor include - Manuals Included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Disc cutter, saw blade, cutter -various: manufacturers -Various diameters: Ø 45 mm - Ø 90 mm, width 1 mm - 8 mm Type: HSS -Sale: only complete set -Weight: 8 kg

; operational

Drying plant aluminum for corn and grain, Direct air heater 1200 KW, Weishaupt burner L5, 1 fans 30 KW, wet elevator galvanized, control cabinet. Mob. + 491715213204

feeder: • pallet feeder • machine number (feeder) 34103/88 • counter EVZ 30 1st folding unit: • pre-slitter shafts • 4 buckle plates • rear-mounted slitter shafts • noise prevention 2nd folding unit: • working width max. 94cm • 4 buckle plates • rear-mounted slitter shafts • noise prevention 3rd folding unit • working width max. 66cm • 2 buckle plates • rear-mounted slitter shafts • noise prevention Still in operation: No Available: sofort

Crane hook Capacity: 0,7 tons Crane hook is fully functional, but not suitable for our requirements.