stahl 100 used for sale

SHORT ROD AUTOMATIC LOADER IRCO BREUNING ILS – RBK 100 With servo drive Year 2006 Material length: 1200 mm Material diameter from 0 to 5 mm – max. 0 to 102 mm

Two identical, mobile, electrically heated and thermally insulated stainless steel preparation vessels Scharf are available. Nominal volume: 100l, max. filling material density: 1kg/dm³, max. operating temperature: 80°C, diameter: 500mm, machine dimensions X/Y/Z: approx. 1000mm/700mm/1050mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible.

AFM DEFUM BACA R-1000 CNC vertical machining center was built in 2013 in Poland by Andrychowska Fabryka Maszyn S.A. The machine is designed for the precision machining of workpieces with a maximum weight of 500 kg. The combination of a stable design and high-quality components guarantees the best machining results. This makes the CNC milling machine ideal for use in production plants, both for unit and series production. Workpieces are machined in three axes X, Y and Z with feeds of 1000 mm, 510 mm and 560 mm respectively. To ensure excellent dynamics and repeatability of feeds, all linear axes are driven by efficient servo drives. The spindle, operating at a maximum speed of 8000 rpm, features a BT40 taper, which enables the use of a wide range of cutting tools designed for various machining operations. The work table with a length of 1200 mm and a width of 500 mm is equipped with T- ...

Manufacturer: NORTE Year of manufacture: 2002 Model: VS 1000 Type of machine:Milling Machining Center Technical Details : - Machine weight: approximately 28,000 kg - Transport width: approximately 12,000 mm - Transport depth: approximately 4,800 mm - Transport height: approximately 4,500 mm - Working area, X axis travel: 8,000 mm, with pendulum machining at vertical spindle, 2 working areas of 2 x 3,765 mm - Working area, Y axis travel: 1,000 mm - Working area, Z axis travel: 1,000 mm - Feed range for X and Y axis: 1 to 20,000 mm per minute - Feed range for Z axis: 1 to 20,000 mm per minute - Maximum feed force X, Y, Z axis: 15,000 N - Rapid traverse X and Y axis: 20,000 mm - Rapid traverse Z axis: 20,000 mm - Protection class of feed drives: IP 64 - Voltage: three phase current 400 / 240 V, 3 phases / MP / 50 Hz - Control voltage with transformer: 24 V DC - Supply cable: minimum 4  ...

Semi-portaal bovenloopkraan - twee vaste hefsnelheden - dubbele drive bovenaan - geen rails nodig, de kraan beweegt over de vloer

x-travel: 2000 mm y-travel: 1500 mm z-axis: 3000 mm W-axis (spindle longitudinal): mm spindle diameter: 100 mm table surface area: 1.400 x 1.300 mm table load: t spindle turning speed range: U/min power capacity - milling spindle: kW tool taper: MK | dimensions: 6,4 x 3,2 x 3,4 m weight of the machine ca.: 11,0 t used table borer. - some tool holders - turntable with motor - coolant system - facing plate Ø 660 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Profile height: max.150 mm Profile width: max. 300 mm Milling area: 365 x 230 mm Pneumatic workpiece clamping Minimum quantity spraying device 2 pneumatic copy bolts with copy pin 5/ 8/ 10 mm

Manufacturer: TOS Model: W 100 Condition: Used Stock number: 9339 Worktop length: 1250 mm Worktop width: 1250 mm X-axis moves: 1600 mm Y-axis moves: 1120 mm Z-axis moves: 1250 mm Spindle diameter: 100 mm

Semi-automatic strapping machine for PP strapping ROBOPAC SR 1000 Clamping head with electromechanically controlled feed and return unit. Welding unit with electronically controllable temperature control by potentiometers. Strap tension adjustable from 15 to 40 kg by handwheel. Reel seat adjustable to 3 different core diameters 200-230-280 mm. Removable stainless steel work surface with safety switch. Working height 750 mm. Mobile. Castors with parking brake. Power supply 220 V. PP tape outer diameter up to 480 mm. Width 6/8/12/15.5 mm. Machine dimensions: height x width x depth: 750 x 930 x 580 mm. Internal NR 662 Strapping Machine ROBOPAC SR 1000 Carton Sealing Machine Packing Machine

Key data: 100 t, 2600 mm

Manufacturer: ERMAKSAN Model: Speed-Bend Pro 2600×100 Year: 2022 Condition: Used Stock number: 9340 Control system: Delem DA-66T Press force: 100 t Maximum bending dimension: 2600 mm Motor power: 11 kW Machine height: 2550 mm Machine length: 4350 mm Machine width: 2500 mm Machine weight: 6273 kg Equipments: Back stop Front Support Arms Foot control Safety Covers Bending fixtures

Code: 0453 Brand: OSAMA Model: S 2 R 1000 - CE Standard Automatic 2 rollers glue spreader for vinyl glue (PVAC), urea glue (UF) and polyurethane glue, for various types of materials like MDF, chipboard, plywood, parquet, composite materials, plasterboards, furniture, panels, doors and various, building sector, sponges, mattresses, papermaking - CE Standard NEW grinded roller Working width 1000 mm Working height 100 mm Roller diameter 185 mm Feed speed 18 mT/min Motor power 0,5 Hp Work surface height 800 mm Overall dimensions mm 1700 x 780 x 1350 h Weight kg 270

The used DORST DK 100 is a robust sizing and powder compaction press designed for high-performance industrial applications. Capable of a maximum pressing force of 1000 Kn and a withdrawal force of 500 Kn, this machine provides powerful and reliable operation. It accommodates a filling height of up to 110 mm with a pressing travel of 50 mm, ensuring versatility for various compaction tasks. The upper punch stroke is 140 mm, with adjustable travel up to 75 mm, allowing for precise control over pressing operations. This model offers between 5 and 22 strokes per minute, giving you flexibility in production rates. The die return force is 100 Kn, while the supporting force in the pressing position reaches 300 Kn. Pneumatic operations are supported with an upper punch preload of up to 30 mm and compressed air consumption of approximately 80 liters per minute. It requires a total connected load  ...

Pressure total: 100 ton Daylight: 1.400 mm Table surface area : 1.300 x 1.000 mm Slide area: 1.300 x 1.000 mm Ejector Force: 35 kN max. capacity of swivelling ram plate: 40 kN Die Weight on table max.: 80 kN max. capacity of tilting table: 50 kN Oil volume: 200 l Required power: 10 kW Dimensions L x W x H: 3.95 x 2.3 x 4.5 m Distance between the columns F - B: 1.050 mm Weight of machine approx.: 10 ton

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 7408; Engine: Perkins 4008-TAG2A; Accessories: Battery, Control Panel, Including : coolant heater and battery charger

Injection moulding machine Demag 1000 to BJ 2019

carrying capacity: 1000 kg number of suction cups: 8 suction cup dia.: 280 mm Vacuum lifter VH 8-1000 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 4x galvanized crossbeams with a length of 1,000 mm - 8x Springy, articulated and adjustable suction cup holders - 8x suction cups Ø 280 mm, in case of wear the seal can be separated whose metal supports can be changed inexpensively and without tools - 8x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. is routed to the lifting device ne ...

pressure: 100 t punching cross-cut in cmm: 40.0 in 22.0 mm ST stroke: 120 mm column arm: 760 mm total power requirement: 8.5 kW weight of the machine ca.: ca. 3.800 kg dimensions of the machine ca.: ca. 2500 x 1700 x 2000 mm Original price, including stop system: approx. 45.000 euros Special price available upon request Features: - Robust / heavy-duty hydraulic hole punch - Punch stroke continuously adjustable - NC stop system MUBEA MATIC 82 Travel range in X and Y axes With FAGOR control unit Includes large support table Separate control cabinet - Various (custom) punching tools (see Figure 9) - Front safety guard, including sheet metal scraper - 1 freely movable foot switch - Operating instructions for machine and stop system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t stroke: 300 mm table surface area: 1070 x 260 mm column travel between the guideways: 1070 mm ajustment speed: 8.0 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec oil volume: 90.0 l engine output: 5.5 kW weight of the machine ca.: 1500 kg. dimensions of the machine ca.: 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery speed 1x working speed 1x retreat speed - Piston can be stopped in any position - Hydraul ...

weight max.: 1 t clamping width: 810 mm Colour: 7016 RAL length: 1210 mm width: 810 mm height: 590 mm gear diameter: 175 mm dimensions of the machine ca.: 1370 x 840 x 605 mm Robust pallet truck for the safe and easy transport of pallets in workshops, warehouses, or factories - Powder-coated in anthracite gray - Made in Germany. - Four corner stops prevent the load from slipping during transport. - The pallet truck chassis is easy to maneuver thanks to its two swivel casters. Transport can be carried out with low rolling resistance The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t stroke: 380 mm table surface area: 1740 x 996 mm pressure: 258 bar ajustment speed: 7,54 mm/sec work speed: 2,47 mm/sec return speed: 9,06 mm/sec dayligth: 700 mm table height: 720 mm total power requirement: 2,2 kW weight of the machine ca.: 1685 kg - Manually movable portal - Movable cylinder manually (left - right) - Cylinder extension up to the table - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Joystick to move the piston up / down - Hand pump for precision work These straightening presses are equipped with a movable cylinder (on the side) and a Movable frame (longitudinal-running) equipped to allow easy access to all allow points of the surface. The design of this portal press makes it possible to put heavy material on the table with a crane and that Slide the portal over the material at the beginning of the pressing process. The qual ...

x-travel: 1.000 mm y-travel: 340 mm z-travel: 450 mm table:: 1.300 x 400 mm spindle taper ISO: 40 SK turning speeds: 32 - 1.400 U/min spindle stroke: 80 mm total power requirement: 7,5 kW Features: - Universal console milling machine with HEIDENHAIN digital display - Mechanical tool clamping - Cooling system - Various SK 40 tool holders - Machine documentation in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: max. 1000 kg turning speeds: 0,18 - 0,58 U/min height: 976 - 1436 mm inclination: 0 - 115 ° table diameter: 895 mm voltage: 380 V total power requirement: 2,0 kW weight: 685 kg range L-W-H: 2414 x 920 x 1436 mm Exhibition machine from 2024 with only approx. 2x operating hours Condition NEW Special price on request The AK BEND SRH hydraulic welding positioner is ideal for welding, assembly and maintenance work. Positioning is done via a hydraulic rotation and tilting function. Description: - electro-hydraulic turning and tilting function - Fast handling of workpieces - Maximum productivity thanks to optimal working position - Lifting, tilting and turning workpieces in one clamping - Low idle times thanks to turning components - Maximum work performance thanks to comfortable working - Back-friendly working for the user Equipment: - Continuously variable speed adjust ...

turning length: 1000 mm turning diameter: 330 mm turning dia. over face-slide: 198 mm turning dia. in gap: 476 mm spindle bore: 38.0 mm turning speeds: 70 - 2000 U/min bed width: 180 mm spindle taper: DIN ISO 702-2 Nr. 4 taper in tailstock: 3 MK quill travel: 110 mm total power requirement: 1.5 kW weight of the machine ca.: ca. 610 kg. range L-W-H: 1930 x 755 x 1300 mm Features - Ideal for technical schools, repair shops, and training workshops - Modern main spindle bearing assembly with precision-grade angular contact ball bearings - Single-lever chuck for the tailstock, adjustable for taper turning - Hardened and ground gears and shafts in the gearhead - Optimally suited for machining steel, non-ferrous materials, and plastics - Removable bridge for machining workpieces with large . diameters - To minimize the effects of vibration, the solid prismatic bed . is additionally equipped wit ...

cutting diameter: 335 mm saw band length: 4400 mm table height: 750 mm : 500 mm : 335 mm : 500 x 335 mm : re. 330 li. 305 mm cutting speed: re. 320x335 li. 305x335 mm down speed: re. 180 mm dimensions of saw-band: re. 170 x 335 mm workpiece weight: 18 - 115 m/min capacity 90 degrees: round: 0 - 300 mm/min. capacity 90 degrees: flat: 4400 x 34 x 1,1 mm capacity 45 degrees: round: max. 250 kg/m : 4,0 kW work height max.: 2400 kg connected load: 3500 x 2350 x 1900 mm Features: - Material bundle clamping - Automatic feed - Laser light for cut line indication - Micro-dosing device - Motorized chip brush - Clamping pressure control on the control panel - Fully automatic sawing process after entering the length and quantity - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 45 mm square edge steel: 40 mm L-beam: 120 x 13 mm flat steel: 500 x 12 mm punching pressure: 60 t throat: 510 mm : 500 x 12 oder 400 x 16 mm punch diameter: 27 in 17 mm punch diameter: 39 in 12 mm oil volume: 80 l total power requirement: 7,5 kW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 1,8 x 0,9 x 1,8 m Hydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm². Electric 380 volt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: RAUHEIS Hommel TKLT 1000 : ja weight of the machine ca.: 200 kg Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 10000 , 110

DEMAG SUMITOMO ERGOTECH 1000 T Injection Molding Machine - Year 2003 Type: 1000/1400 - 8000 NC4 Clamping Force: 1000 T Screw Diameter: 110 mm Theoretical Injection Volume: 4372 cm³ Injection weight. : 3930 gr Opening Stroke: 1250 mm Daylight : 2450 mm Distance Between Tie bar : 1400 x 1120 mm Platen Dimensions: 1950 x 1670 mm Mold tickness min/max : 500 /1200 mm Oil Capacity: 1300 L Dimensions: 11,90 x 3,20 x 2,90 m Weight: 63 tons

An electric Nabertherm shuttle kiln for firing ceramics, stoneware and soft-paste porcelain is offered. Connected load: 69kW, maximum temperature: 1340°C, volume: approx. 1000l, internal dimensions X/Y/Z: 800mm/1600mm/800mm, control system: Nabertherm C19 program controller. Equipped with automatic exhaust-air flap control, motorized ceiling flap and removable lifting eyes. Overall dimensions X/Y/Z: approx. 1300mm/2200mm/1840mm, weight: approx. 3000kg. Documentation available. An on-site inspection is possible.

DAB Drenag 1000 M-A: Automatic version with float switch., , The DAB Drenag 1000 M is a professional, stainless steel submersible pump designed for pumping groundwater, rainwater, sandy construction site water, and lightly contaminated wastewater. Thanks to its robust construction of AISI 304 stainless steel and a wear-resistant steel impeller, this pump is highly resistant to abrasive particles such as sand and mud., , , Pump capacity: Up to 21, Head: Up to 15.2 meters (1.52 bar pressure)., Maximum particle size: 10 mm for solids (no long-fiber material)., Connection: 1 ½ female thread (vertical compression fitting)., Power: 1 kW (rated) / 1.29 kW (maximum input)., Cable length: Standard 10-meter H07RN-F power cable., Protection class: IP68 (fully waterproof for prolonged immersion), , Throughput capacity: 21 m3/h, Max dirt passage: 10 mm, Max. head: 15 MWK, , = More information =, , Y ...

DIGI-Flow water meter, 45 units in stock. Available for immediate delivery!, , -Housed in a protective steel casing, -Minimum flow rate: 4 m³/h, -Built-in batteries, 5-year battery life, -Liquid temperature up to 50°C, -Connection fittings: Female and Male Cardan - Type C - Perrot, , Digi-Flow 100 with a 100 mm free passage. The digital display shows the current water flow rate and tracks the total volume of water pumped. This makes it possible to quickly and easily get an overview of the pump’s water flow at any time. Ultrasonic waves are used to measure the water flow with high accuracy and reliability. The major advantage of this principle is that the medium does not come into contact with the measuring sensors. The system is completely obstruction-free. Pressure loss is negligible, so the pump loses virtually no power. The housing is made of galvanized sheet metal for a long serv ...

x-travel: 1000 mm y-travel: 550 mm z-travel: 500 mm CNC-control: Fanuc Oi-MD table-size: 1.100 x 500 mm max. table load: 700 kg spindle taper ISO: BT-40 spindle turning speed range: 10.000 U/min feed stepless: 24.000 mm/min rapid traverse: 36/36/30 m/min drive capacity - spindle motor: 15/11 kW tool change unit: 24 coolant: IKZ 20 bar voltage: 400 V total power requirement: 30 kVA weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3,35 x 2,20 x 2,67 m chip conveyor: 2,40 x 1,50 x 1,40 m filter unit: 0,90 x 1,40 x 1,30 m Transformer: 0,60 x 0,55 x 0,55 m - Serial No..:M281361B5N D - Machine ON: 21,011 h - NC-Indexing Device Manufacturer KITAGAWA, (Call by M-Command) - control: FANUC Oi-MD - Internal coolant supply through spindle 20 bar - Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 255 mm centre distance: 1080 mm turning diameter over bed: 500 mm turning diameter over slide: 290 mm turning length: 1000 mm spindle taper: KK 8 DIN 55027 control: Sinumerik 810 D SIEMENS bed width: 360 mm spindle bore: 70 mm turning speed range: 2 - 2800 U/min rapid travel - longitudinal/face: 10 / 5 m/min quick change toolholder: MULTIFIX Typ B / CAPTO drive capacity - spindle motor: 11,0 kW taper in tailstock-quill: MK 5 dia. of quill: 80 mm quill stroke: 160 mm coolant: voltage: 400 V total power requirement: 16,0 kVA weight of the machine ca.: 3,0 t dimensions of the machine ca.: 2,85 x 1,60 x 1,80 m chip conveyor: 4,00 x 0,40 x 1,50 m - Serial-No.: 346 / 03 - control: SIEMENS Sinumerik 810 D - quick change tool holder MULTIFIX - coolant equipment - machine lamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 100 mm weight of the machine ca.: 30 kg dimensions: 300 x 250 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm arm length: 1.000 mm workpiece height max.: 1.250 mm table-size: 1.150 x 690 mm spindle taper MT: 4 spindle turning speed range: 40 - 1.400 U/min feed range: 0,08 - 0,40 mm/min crossrail adjustment horizontal: 800 mm crossrail adjustment vertical: 700 mm spindle stroke: 220 mm power requirement: 3,5 kW coolant: voltage: 380 V total power requirement: 4,0 kW weight of the machine ca.: 1,6 t - Serial-No.: A01/446/97 - adjustable cube table 600 x 500 x 500 mm - coolant device - machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t table length: 1250 mm table width: 900 mm table travel: 1200 mm dayligth: 700 mm upper clamping surface:: 1000x1200 total power requirement: KVA weight of the machine ca.: 12 t dimensions of the machine ca.: . m Nominal force: 1000 kN Top plate pivots Table is movable The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulM ...

workpiece weight: 500 kg 0: 65 °C heating capacity: 54 kW 0: 2x300 l total power requirement: 84 kW weight of the machine ca.: . t dimensions of the machine ca.: . m No. 407 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1050 mm y-travel: 650 mm z-travel: 400 mm table surface area: 1200x350 mm Spindle clamping, automatical: boring spindle: : spindle taper ISO: 50 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

height: 1000 mm width: 750 mm depth: 500 mm T-slot - width: 22/40 mm T-slot - distance: 170 mm number of T-slots: 5 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m There are 2 brackets. The dimensions refer to 1 angle. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software soluti ...

turning diameter: 280 mm turning length: . mm control: Mazatrol 640 T x-travel: 190 mm y-travel: 309 mm z-travel: 330 mm turning speeds: 4000 U/min feed: 30 m/min number of tools: 12 bar loader: ja total power requirement: 24 kvA weight of the machine ca.: 3,5 t dimensions of the machine ca.: . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created  ...

turning diameter: 1020 mm turning length: 4000 mm turning diameter over slide: 720 mm Holder Multifix: control: Siemens type: 805 tailstock quill taper MT: 6 transmission ratio: 2 turning speeds: U/min turning speeds: U/min bed width: 560 mm spindle bore: 200 mm workpiece weight: kg faceplate: 1000 mm make: Forkhardt PSA 1000 3 jaw chuck Forckrath: 500 mm steady: 263 mm steady: 500 mm total power requirement: KVA weight of the machine ca.: t dimensions of the machine ca.: 7,4x2,5x2,5 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your bus ...

faceplate diameter: 4770 mm swing diameter: 10000 mm turning height: 3500 mm table load: 100 t turning speeds: 40 U/min table drive: 125 kW Control: Siemens type: 840 D Rest: 1 slide adjustment: 1421 mm ram head dimension: 250x250 mm inclination: +/-30 ° live tooling: 16 Kw spindle taper ISO: 50 spindle turning speed range: 3000 U/min chip conveyor: total power requirement: 150 kW weight of the machine ca.: t dimensions of the machine ca.: m Machiney Refurbished 2003 Table extension up to 8000 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, ...

turning diameter over bed: 3050 mm turning diameter over slide rest: 2500 mm turning length: 21200 mm Control: Siemens type: 840D turning speeds: 0,236-60 U/min faceplate: 3000 mm main drive motor: 200 kW tailstock quill diameter: 900 mm roll stand: steady: 1200 mm steady: 1200 mm steady: 750 mm steady: 750 mm with live steady: 2000 mm faceplate: 2000 mm Thickness: 330 mm workpiece weight: 200 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m vier Bahnenbett Mitlaufendes Stützlager durchmesser 680 Bohrstangenlagerung Rollenbock Rollenbock mit Adapter Bohrstand 450 x 10300 mm Bohrstand 650 x 11100 mm Innenschleifmaschine Faros Adapt for Bohrstangenaufnahme The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 4 ...

ram weight: 1000 kg stroke: 1000 mm throat: 800 mm impact capacity: 4200 mkp total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m Steam drive The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t passage width: . mm stroke: . mm tracking travel: 45 mm safety distance: 208 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Follow-up time 149 sec The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece length: 5000 mm swing dia.: 1100 mm clamping length: 6000 mm grinding diameter: 1100 mm grinding wheel diameter: 1300 mm workpiece weight: 2500 kg main drive motor: 22 kW crankshaft bearing diameter: 275 mm steady: 100-250 mm speeds of tool: 400/500 U/min workpiece turning speeds: 20-40 U/min total power requirement: kW weight of the machine ca.: 30 t dimensions of the machine ca.: m 13 Grinding Steady Rests Mandrels Mounting Flanges Clamping Devices The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. Y ...

turning diameter over bed: 1100 mm turning diameter over slide rest: 710 mm turning length: 6000 mm Torque: 35000 Nm Height of centres: 550 mm steady: 100-440 mm steady: 280-550 mm steady: 80-300 mm chip conveyor: workpiece weight: 10000 kg workpiece weight in steadies max.: 15000 kg total power requirement: 55 kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look ...

x-travel: 10000 mm y-travel: 1100 mm z-travel: 1700 mm Control: Heidenhain type: TNC 155 Tool changer: 30 table surface area: 10000x1000 mm chip conveyor: universal head: table height over floor: 800 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mm y-travel: 550 mm z-travel: 500 mm spindle taper ISO: 40 control: Heidenhain type: TNC 155 milling-head swivable +/-: boring spindle: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

pressure: 1000 t distance between columns: . mm stroke: . mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Reading type: . 0 weight - pallet system: . kg length: . mm 1 Posten Bügelmessschrauben 400-500 mm 700-800 mm 800-900 mm 900-1000 mm The technical data is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to sell the machine prior to purchase, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.