stahl 100 used for sale

Caster, swivel caster, transport equipment caster, fixed caster -Swivel caster: Polyamide -Wheel: Ø 100 mm -Width: 36 mm -Number: 6x swivel casters available - Price: per piece -Overall dimensions: 145/85/H130 mm -Weight: 0.8 kg/pc.

feed under pressure: 2,7 mm/sec pressure: 100 t stroke: 400 mm table surface area: 920 x 560 mm feed down: 4,25 mm/sec feed up: 8,22 mm/sec oil pressure max. in the work cylinder: 385 bar oil volume: 26 l diameter of piston: 125 mm column daylight: 920 mm voltage: 400 V/ 50 Hz total power requirement: 4 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,7 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • pressure cylinder horizontally moveable, • table can be hydraulically adjust in height, • Cylinder Ø 175 mm, piston base Ø 125 mm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Material width: 1000 mm workable material thickness: 1-20 mm min. part length: 150 x 100 mm Required power: 4 x 4,8 kW Rotation speed: 1400 rpm Length: 2220 mm Width: 1500 mm Height: 1500 mm Weight of machine approx.: 1550 kg

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Total length: 285 mm -Width/Height: 100/120 mm -Dimensions: see drawing in the photos -Weight: 23.7 kg

• \cf1Slim design (space requirement only 0.3 square metres) with electromechanical lift drive • Permissible load 1,000 kg • Lift mast with floor and ceiling bearing (included in scope of delivery) • Overall height 3,700 mm without ceiling bearing • Overall height 3,857 mm with ceiling bearing for room height 4,007 mm • Operation via remote-controlled touch panel outside the danger zone • Jog mode and semi-automated process sequences through the use of a microcontroller with touch panel visualisation • Motor with spring-applied brake • Button for operating the discharge flap • Button for activating the vibrator • Safety catch to prevent hazards caused by sudden and unintentional dropping of the load arm • Load support for Bohle container MCG 1200 and MCG 1600 (container not included in the scope of delivery) • Insertable drum frame with load turning gear for 200 ...

• Slim design (space requirement only 0.3 square metres) with electromechanical lift drive • Permissible load 1,000 kg • Lift mast with floor and ceiling bearing (included in scope of delivery) • Overall height 3,700 mm without ceiling bearing • Overall height 3,857 mm with ceiling bearing for room height 4,007 mm • Operation via remote-controlled touch panel outside the danger zone • Jog mode and semi-automated process sequences through the use of a microcontroller with touch panel visualisation • Motor with spring-applied brake • Button for operating the discharge flap • Button for activating the vibrator • Safety catch to prevent hazards caused by sudden and unintentional dropping of the load arm • Load support for Bohle container MCG 1200 and MCG 1600 (container not included in the scope of delivery) • Insertable drum frame with load turning gear for 200 l M ...

Key data: 360 mm, 1060 , 900

Machine type: EVP-RA 100 Manufacturer: ERBA Power kW: 1.1 Total volume: 130 lt. The EVP-RA 100 vibratory finishing machine from ERBA has a rising work container base with separation. It has an easily replaceable screening unit and an electrical control cabinet. A fully automatic PLC process control is optionally possible. The machine is characterized by high work efficiency by means of an integrated drop stage. Emptying or separation takes place via the integrated flap (manual/pneumatic). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely adjusted by means of a frequency converter. The EVP-RA 100 can be linked to other machines due to its lateral discharge. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories ...

Square, locksmithsquare, hair square, precision hair square -Angle angle: Leg length 1000 x 660 mm -Dimensions: 1015/660/H70 mm -Weight: 18 kg

Weinig Unimat 1000 Star four-sided planer Working width 20-230mm Working height 8-160mm Number of spindles 6 Spindle system: Bottom 5.5kw 6000r.p.m Right 4kw 7000r.p.m Left 5.5kw 7000r.p.m Mountain 7.5kw 7000r.p.m Bottom 7.5kw 7000r.p.m Universal 7.5kw 7000r.p.m Automatic height and width setting Automatic Countertop Lubrication Pump Countertop driven rollers (1 corrugated roller for wet wood) Pusuw speed adjustable by variator 5-24m/min Weinig EM10 automatic material feeder

Stop square, locksmithsquare, hair square, precision hair square, control square -Manufacturer: Horex, stop square DIN 875/2 -Type: 1000 x 500 mm -Accuracy level: 2 -Quantity: 5x angle brackets available -Price: per piece -Dimensions: 1010/500/H50 mm -Weight: 7 kg/pc.

Motor power 5.5kW 400V 1240 rpm Boiler 2 pieces à 100 liters Maximum volume flow 850 litres Maximum pressure 10 bar Refrigeration Dryer AD54 No. 17M019986 Motor 0.37kW 230V max. 16 bar input Flow rate 900 litres/min Coolant R13a-0,21kg The compressor and dryer are mounted as a single unit on a steel pan, which can also be used as a pallet with Pallet truck functions (to be transported with pallet truck)

Angle bracket, locksmithsquare, flat angle -Flat angle: Leg length 1000 x 660 mm -Number: 2x flat angles available -Price: per piece -Dimensions: 1000/660/H12 mm -Weight: 10 kg/pc.

Angle bracket, locksmithsquare, flat angle -Flat angle: Leg length 1000 x 500 mm -Quantity: 4x flat angles available -Price: per piece -Dimensions: 1000/500/H9 mm -Weight: 5.3 kg/pc.

Stop square, locksmith square, control square -Manufacturer: Holex, stop angle DIN 875/1 -Type: 452510 100 x 70 mm -Accuracy level: 1 -Dimensions: 105/70/H20 mm -Weight: 0.3 kg

Power converter, power supply, power supply unit, switching power supply, power supply module, DIN rail power supply -Manufacturer: Mean Well, switching power supply -Type S-100F-24 -Output: 24 V 4.5 A -Dimensions: 200/10/H40 mm -Weight: 0.7 kg

Key data: 245 mm, 1080 , 895

Machine type: EVK 100 Manufacturer: ERBA Heating element kW: 1.1 Total volume: 100 lt. Description: With the ERBA Granulate Dryer EVK 100, workpieces can be easily separated from the granulate with the integrated screening device. It has excellent drying ability, a direct heating system and digital temperature control. The working tank is completely sprayed with polyurethane on the inside. The EVK 100 can be linked to other machines. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. These are sample photos. The actual appearance and size may differ from the pictures. If you are interested, we look forward to hearing from you. We will be happy to advise you wit ...

USED TETRA PAK TBA 8 1000 ML SLIM FILLING LINE FOR SALE Item #: Usm-204 Category Tetra Pak TBA 8 TBA 8 1000ml Slim Filling Machine, version 120v Cap Applicator 30 Flex, for helicap 23 Packer 70 conveyors and paper trolly

USED TETRA PAK A3 FLEX 1000ML SLIM FILLIN LINE FOR SALE YEAR 2017 Item #: Usm-207 Category Tetra Pak A3 CF/Flex Used A3 Flex 400v 1000ml Slim Filling Line Year 2017 A3 Flex 1000ml Slim Filling Machine, Version 400v, Year of manufacturing 2017, Working ours 4650, Speed 7000 Packs Per Hour Helix Accumulator ACHX 30, Lenght 50meter, Year of manufacturing 2017 Cardboard Packer 32, TCBP 32, Working hours 5450, Year of manufacturing 2017 Tetra Pak Shrink Wrapper, Year of manufacturing 2017 Tetra Pak Cap Applicator, Cap Flex 30, Cap type Helicap 23, working hour 5071, Year of manufacturing 2017 Line Controller 30 plus, Year of manufacturing 2017 Conveyors and Paper trolly PROCESSING EQUIPMENTS: Pasteuriser 8000 LPh, Type C85, Year of manufacturing 2017 Homogeniser, Tetra Alex 30, Year of manufacturing 2017 High sheer mixer, capacity 8000 LPh, Year of manufactuirng 2017 Mi ...

Reciprocating saw, dovetail saw, tiger saw, saber saw -Manufacturer: Flex, reciprocating saw with carrying case -Type: SK 602 VE -Nominal power input: 1000 W -Stroke rate: 800 - 2400 /min -Dimensions: 620/260/H110 mm -Weight: 9 kg

Working area: 6000 x 1000 x 3000 mm (max stroke) Rotary table: 2000 x 2000 - load capacity: 15000 kg Max working feed: 5000 mm/min Max rapid feed: 8000 mm/min Fixings: ▪ Nose: 3000 rpm ▪ Universal Head: 3000 rpm Control: Selca 3045 PD

Reciprocating saw, dovetail saw, tiger saw, saber saw -Manufacturer: Flex, reciprocating saw with carrying case -Type: SK ZSK 602 E -Nominal power input: 1000 W -Stroke rate: 700 - 2400 /min -Dimensions: 620/260/H110 mm -Weight: 8.6 kg

Fan filter, fan array, air cooler, control cabinet fan, filter fan -Manufacturer: Rittal, filter fan type SK 3238.100 -Motor: NMB 230 V 16.5 W -Dimensions: 150/150/75 mm -Weight: 0.8 kg

Servo drive, power supply module, control unit, converter, controller, servo module, axis amplifier, DC converter, inverter -Manufacturer: B&R, ACOPOS micro 100S Servo inverter module -Type: 80VD1 00PS.C02X-01 -Dimensions: 200/65/H105 mm -Weight: 0.9 kg.

Directivity: 100 t Projection: 325 mm Table size: 490 x 3500 mm Max. stroke: 160 mm Pushrod speed upwards: 206 mm/s Slide speed downwards: 68 mm/s Hydraulic drive: 380 V, 15 kW Space requirement: 3500 x 1650 x 2760 mm Weight: 5500 kg

Servo drive, power supply module, control unit, converter, controller, servo module, axis amplifier, DC converter, inverter -Manufacturer: B&R, ACOPOS micro 100D Servo inverter module -Type: 80VD1 00PD.C022-01 -Dimensions: 200/65/H105 mm -Weight: 0.9 kg.

Scissors, pneumatic scissors, air cutters, wire cutting scissors -Manufacturer: OPT, Replacement blades for pneumatic shears, 4 pieces -Type: 100S -Cutting length: see photo -Submission/Price: complete -Dimensions: 120/45/H35 mm -Weight: 0.1 kg/pc.

KNOLL Chip Conveyor + Coolant Tank for DMU 200 TYPE: 375 S-2/100 TOTAL LENGTH (mm): 4350 TOTAL WIDTH (mm): 1180 BELT DIMENSIONS (mm): 1840 x 375

Length stop, rip fence, saw stop, material stop, motorized length stop, controlled length stop, feed stand, support foot with angle piece -Length stop: Support foot with angle piece for various machining options -Shafts: Ø 45 mm -Displacement lengths: see photos -Dimensions: 1000/200/H560 mm -Weight: 18.7 kg

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt roller: Transport roller -Roll: Ø 100 x 1800 mm -Shaft: Ø 23 x 200 mm -Quantity: 3x transport rollers available -Price: per piece -Dimensions: Ø 100 x 2200 mm -Weight: 13 kg/pc.

arm length: 4000 mm weight max. in kg: 1000 kg swivelling range: mindestens 160 Grad height: 4000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Schneider Automatic Demga Hoist 500 KG The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 3050 mm turning diameter over slide rest: 2500 mm turning length: 21200 mm Control: Siemens type: 840D turning speeds: 0,236-60 U/min faceplate: 3000 mm main drive motor: 200 kW tailstock quill diameter: 900 mm roll stand: steady: 1200 mm steady: 1200 mm steady: 750 mm steady: 750 mm with live steady: 2000 mm faceplate: 2000 mm Thickness: 330 mm workpiece weight: 200 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 3500 mm weight max. in kg: 1000 kg swivelling range: mindestens 160 Grad height: 3000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Schneider Automatic Demga Hoist 500 KG The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t passage width: . mm stroke: . mm tracking travel: 45 mm safety distance: 208 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vibration damper, compensator, damper -Installation: on pumps, compressors, valves -Machines for: noise dampening and absorption of small vibrations -Size: DN 100 -Number: 2x available -Price: per piece

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 260 x 1000 mm -T slots: 16 mm

x-travel: 700 mm y-travel: 550 mm z-travel: 500 mm spindle taper ISO: 40 control: Heidenhain type: TNC 155 milling-head swivable +/-: boring spindle: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1000 mm table width: 1008 mm table height: 130 mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1000 mm swing diameter: 1400 mm turning height: 1100 mm Control: Siemens type: 840 D Shop Turn Tool changer: 12 Pos. x-travel: 2000 mm z-travel: 700 mm slide adjustment: 1000 mm Rapid movement: 6000 mm/min turning speeds: 500 U/min : total power requirement: 62 kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore for us not binding. We reserve the right to prior sale, it apply only our business and conditions of sale. About Us more than 400 own machines in stock over 12000 m² storage area, crane capacity 70 t more than 10000 articles accessories for your workshop You want to sell machines, production lines or your company, Then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1100 mm turning diameter over slide rest: 710 mm turning length: 6000 mm Torque: 35000 Nm Height of centres: 550 mm steady: 100-440 mm steady: 280-550 mm steady: 80-300 mm chip conveyor: workpiece weight: 10000 kg workpiece weight in steadies max.: 15000 kg total power requirement: 55 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 410 mm stroke: 8-112 mm no. of strokes doubel-strokes per min.: 55 / 82 ram - range of adjustment: 80 mm table surface area: 950 x 700 mm ram surface: 700x450 mm hole in the table: Ø 280 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 7,0 t dimensions of the machine ca.: 1400x2200x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t stroke: 10-130 mm no. of strokes: 30-90 Hub/min throat: 330 mm ram - range of adjustment: 100 mm table surface area: 950x660 mm ram surface: 540x440 mm hole in the table: Ø 230 mm table height: 1000 mm tool hole in ram: Ø 50 mm total power requirement: 7,5 kW weight of the machine ca.: 7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 380 mm stroke: 300 mm arm length: 380 mm table surface area: 1700x700 mm ram surface: 1400x700 mm dayligth: 650 mm total power requirement: 30 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 2400x3600x3400 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 410 mm stroke: 8-112 mm no. of strokes: 55/82 Hub/min ram - range of adjustment: 80 mm table surface area: 950x700 mm ram surface: 700x450 mm hole in the table: Ø 280 mm table height: 800 mm total power requirement: 11 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: BxTxH 1600x2200x3000 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 380 mm stroke: 400 mm power capacity: 22 kW dayligth: 600 mm ram surface: 600x500 mm table surface area: 720x600 mm weight of the machine ca.: 9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

hydraulic unit, hydraulic pump, hydraulic pump -Max. pressure: 100 bar -Liter output: 21 l/min -Weight: 200 kg

pressure: 100 t distance between columns: 625 mm stroke: 150 mm table surface area: 580x450 mm ram surface: 580x340 mm hole in the table: Ø 150 mm table height: 850 mm tool hole in ram: Ø 45 mm column travel -side: 200x200 mm weight of the machine ca.: ca. 6,0 t dimensions of the machine ca.: BxTxH ca. 1300x1300x2750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t distance between columns: 310 mm no. of strokes: 80 Hub/min ram - range of adjustment: 40 mm table surface area: 400x300 mm ram surface: 250x190 mm tool hole in ram: Ø 35 mm table height: 960 mm weight of the machine ca.: 1,5 t dimensions of the machine ca.: BxTxH 1500x1500x2200 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hoe, transport wagon -Material: entirely made of 4301 stainless steel -Dimensions: 1100/1000/H780 mm -Intermediate dimension: 85 mm -Weight: 41 kg

pressure: 100 t throat: 340 mm stroke: 8-140 mm no. of strokes: 50 Hub/min ram - range of adjustment: 110 mm table surface area: 1000x700 mm ram surface: 650x450 mm hole in the table: Ø 180 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 10,5 t dimensions of the machine ca.: BxTxH 2300x1600x3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t passage width: 810 mm stroke: 400 mm table surface area: 1140x740 mm ram surface: 1140x740 mm dayligth: 670 mm weight of the machine ca.: 8 t dimensions of the machine ca.: 1800x1800x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.