stable used for sale

Machine table for laser marking, stable design, aluminium electric height adjustment 36 cm by Rose+Krieger Additional mechanically adjustable height adjustment 4 frame feet - all adjustable Frame dimensions without table: H 121cm, W 88 cm, D 117 cm Table surface: W 80 cm x D 48 cm

Offered are sturdy wooden boxes with loose lids (1 x used) in top condition as export packaging or for storage. with runners for movement with a pallet truck, forklift, etc. Dimensions: width 80 cm, length 107 cm, height 60 cm In stock: 14 pieces Only pick-up possible

Model: R950-08 Power: M2-M8 Speed (rpm): 700 Air requirement: 750l/min Pressure: 6-7bar Working range: Rmax 950mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 18kg Adapter Holder: TCS 1B Model: R950-12 Power: M3-M12 Speed (rpm): 400 Air requirement: 750l/min Pressure: 6-7bar Working range: Rmax 950mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 18kg Adapter Holder: TCS 1B Model: R950-16 Power: M3-M16 Speed (rpm): 300 Air requirement: 950l/min Pressure: 6-7bar Working range: Rmax 950mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 25kg Adapter Holder: TCS 2B Model: R950-020 Power: M3-M20 Speed (rpm): 150 / 400 Air requirement: 950l/min Pressure: 6-7bar Working range: Rmax 950mm Construction parallel arm: Stable arm structure ...

Model: R1450-08 Power: M2-M8 Speed (rpm): 700 Air requirement: 750l/min Pressure: 6-7bar Working range: Rmax 1450mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 23kg Adapter Holder: TCS 1B Model: R1450-12 Power: M3-M12 Speed (rpm): 400 Air requirement: 750l/min Pressure: 6-7bar Working range: Rmax 1450mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 23kg Adapter Holder: TCS 1B Model: R1450-16 Power: M3-M16 Speed (rpm): 300 Air requirement: 950l/min Pressure: 6-7bar Working range: Rmax 1450mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 27kg Adapter Holder: TCS 2B Model: R1450-020 Power: M3-M20 Speed (rpm): 150 / 400 Air requirement: 950l/min Pressure: 6-7bar Working range: Rmax 1450mm Construction parallel arm: Stable arm s ...

Model: R1950-08 Power: M2-M8 Speed (rpm): 700 Air requirement: 750l/min Pressure: 6-7bar Working range: Rmin 300mm – Rmax 1950mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 23kg Adapter Holder: TCS 1B Model: R1950-12 Power: M3-M12 Speed (rpm): 400 Air requirement: 750l/min Pressure: 6-7bar Working range: Rmin 300mm – Rmax 1950mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 23kg Adapter Holder: TCS 1B Model: R1950-16 Power: M3-M16 Speed (rpm): 300 Air requirement: 950l/min Pressure: 6-7bar Working range: Rmin 300mm – Rmax 1950mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 27kg Adapter Holder: TCS 2B Model: R1950-020 Power: M3-M20 Speed (rpm): 150 / 400 Air requirement: 950l/min Pressure: 6-7bar Working range: Rmin 30 ...

The Rivacold with model number QUM245Z0312 is a high-quality cooling unit designed for industrial applications. The system operates at a voltage of 400 volts and a frequency of 50 Hz and has a current consumption of 7.37 amps. This cooler provides reliable and efficient cooling performance for applications in the food, catering or retail industries. With a rated power of 245 watts, it is able to dissipate a considerable amount of heat and ensure a stable cooling temperature. The Rivacold QUM245Z0312 has high-quality components and is easy to install and maintain. Its robust construction and the use of high-quality materials make it a reliable and durable cooling system. In summary, the Rivacold with model number QUM245Z0312 is an excellent choice for anyone who needs a reliable cooling unit for industrial applications. Its high efficiency, stable performance and easy maintenance ...

approx. 1,350 pieces open fronted storage bin, 4 sizes, Treston transparent - second-hand - : Price per piece ex location (net)! Treston 1940-1: approx. 800 pieces: 7.- €/ piece Treston 1930-1: approx. 100 – 150 pieces: 6.- €/ piece Treston 1950-1: approx. 150 – 200 pieces: 11.- €/ piece Treston 1525-1: approx. 300 pieces: 5.- €/ piece Minimum order: 1 pallet Manufacturer: Treston Type: unknown Year of construction: unknown, Condition: good – very good Available: now Location: D-12277 Berlin Treston 1940-1 Original price approx. 15.-€ / piece External dimensions in mm (L x W x H): 400 x 186 x 156 Internal dimensions in mm (L x W x H): 330 x 155 x 140 Capacity: 7.2 l Color: Transparent Made of dimensionally stable polystyrene Resistant to acids and alkalis of all kinds Temperature resistant from -40° Celsius to +55° Celsius Practical re ...

contino 400/2 KLT container washer The machine is manufactured in a special service provider design and has a maximum tunnel width of 410 mm and height of 410 mm, which means that almost all common industrial containers can be cleaned. Depending on the degree of soiling, the capacity is

UNICRAFT-Hand Pallet Truck-PHW-2508 Product name: PHW professional pallet truck Manafacture: Unicraft Item number: 6152512 Year of construction: 05/2023 Technical details: • Load capacity: 2.5 t • Carrying width: 540 mm • Fork width: 160 mm • Fork length: 1,150 mm • min. fork height: 85 mm • max. fork height: 200 mm • Turning radius: 1,281 mm • Steering angle: 205° • Diameter swivel castors: 200 mm • Swivel castor width: 50 mm • Diameter fork rollers: 80 mm • Fork roller width: 70 mm • Dimensions (LxWxH): 1,550 x 540 x 1,235 mm • Weight: 67 kg • Stable, robust quality • Fully hydraulic lifting and lowering device • Hydraulic pump with hard chrome-plated piston and pressure relief valve • Lowering speed infinitely adjustable via drain valve • Frame and fork in very stable and torsionally stiff shell construction • Er ...

UNICRAFT-Hand Pallet Truck-PHW-2508 Product name: PHW professional pallet truck Manafacture: Unicraft Item number: 6152512 Year of construction: 05/2023 Serial Number: 121098013092 Technical details: • Load capacity: 2.5 t • Carrying width: 540 mm • Fork width: 160 mm • Fork length: 1,150 mm • min. fork height: 85 mm • max. fork height: 200 mm • Turning radius: 1,281 mm • Steering angle: 205° • Diameter swivel castors: 200 mm • Swivel castor width: 50 mm • Diameter fork rollers: 80 mm • Fork roller width: 70 mm • Dimensions (LxWxH): 1,550 x 540 x 1,235 mm • Weight: 67 kg • Stable, robust quality • Fully hydraulic lifting and lowering device • Hydraulic pump with hard chrome-plated piston and pressure relief valve • Lowering speed infinitely adjustable via drain valve • Frame and fork in very stable and torsionally sti ...

Carriage length: 3200 mm; Cutting width at width stop: 1250 mm; Cutting width at cut-to-length fence: 2800 mm; Cutting depth: 90 mm; Pre-scorer: yes; Height adjustment of saw blade: manual; Saw blade swivel adjustment: manual; Adjustment of width stop: manual; Display Saw Blade Angle: Scala; Display cutting height: -; Display Width Stop: Scala; Display Cut-to-length ruler: Scala; Saw blade diameter: 315mm; Speeds: 4000 / 6000 rpm; Motor power: 5.5 kW; Extraction connection: 100 mm; Machine length: 3300mm; Machine width: 2000mm; Weight: 650 kg; The Classic 3200 C circular saw with swivel saw blade meets all the requirements of the modern trade and is the ideal machine for cost-conscious small and medium-sized businesses. Both the robust construction and the generous dimensioning of the machine offer the best working conditions when cutting solid wood or large panels, a ...

Carriage length: 2500 mm; Cutting width at width stop: 1250 mm; Cutting width at cut-to-length fence: 2800 mm; Cutting depth: 90 mm; Pre-scorer: yes; Height adjustment of saw blade: manual; Saw blade swivel adjustment: manual; Adjustment of width stop: manual; Display Saw Blade Angle: Scala; Display cutting height: -; Display Width Stop: Scala; Display Cut-to-length ruler: Scala; Saw blade diameter: 3150mm; Speeds: 4000 / 6000 rpm; Motor power: 5.5 kW; Extraction connection: 100 mm; Machine length: 2660mm; Machine width: 2000mm; Weight: 650 kg; The Classic 2500 C circular saw with swivel saw blade meets all the requirements of the modern trade and is the ideal machine for cost-conscious small and medium-sized businesses. Both the robust construction and the generous dimensioning of the machine offer the best working conditions when cutting solid wood or large panels,  ...

SSI Schaefer Kolli flow rack with pallet buffer • Short refill distances from the pallet buffer • Full use of space above the picking area • Stable continuous frame construction • Stable roller rails guarantee a smooth flow • additional stock on the pallets on the storage side • Can be combined with other SSI Schaefer shelving systems • Easy connection to conveyor systems • Particularly rich accessories Manufacturer: SSI Schaefer  Shelving system: PR 600 Rack type: Kolli flow rack with pallet buffer Shelf height: 4700 mm Shelf depth: 2474 mm Number of levels of continuous frames: 6 pieces Number of levels of pallet buffers: 2 pieces Number of fields: 4 pieces Lower shelf height: 2842 mm Clear field width: 2900 mm Column profile: P 90 / 75 / 2.5 Continuous frame depth: 2450 mm Number of editions: 4 pieces Shelf load: 240 kg max. compartment  ...

Description: Tool trolley with 8 drawers, 6 of which contain tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and detectable. - The tool included is made of chrome vanadium steel. - The workshop trolley has 4 stable castors, 2 steerable, 2 lockable, which ensure very comfortable rolling. On the Tool trolley is a stable worktop made of polypropylene Plastic. - The tools contained in the workshop trolley are made of chrome vanadium steel is stored in styrofoam/foam inserts. + Drawer 1: - 1/4' inch: 13 nuts from 4mm to 14mm, 11 long nuts 4mm - 13mm Ratchet, universal joint, extension. - 3/8' inches: 10 nuts from 10mm to 19mm, 11 long nuts from 8mm to 19mm Ratchet, universal joint, extension. - 1/2' inch: 17 nuts from 10mm to 30mm, 9 long nuts from 10mm to 24mm Ratchet, universal joint, ext ...

Sliding table saw Brand: Panhans Type: 680 100 New machine Technical data: Trolley length 3200 mm Cutting length 3400 mm Cutting height max. 155 mm at 90 ° 105 mm at 46 ° Cut width Width stop 1030 mm Saw blade max. Ø 450 mm Saw blade under table retractable Ø 400 mm Table size cast table top 1200 x 655 mm Table extension plus. 750 x 655 mm Table extension 1200 x 655 mm Table height +/- 20 mm 900 mm Main saw blade speed 3000/4000/5000/6000 rpm Net weight approx. 1051 kg Technical description: Solid German mechanical engineering For trimming, cutting to length, formatting, miter cutting, etc. Dimensionally stable and self-supporting machine body manufactured as a stable frame welded construction from thick-walled steel profiles, laser-processed sheet steel parts and mechanically processed The torsion-resistant and finely planed cast table top is built on the  ...

Machine type: hydr. Hacksaw Make: KASTO Germany Type: WBS 150 / 170 Machine No. No. 116 004 1203 /54407 Saw blade length: 300 x 32 x 2.0 mm Stroke cut pressure: hydr. selectable via adjustable wheel Cutting range at 90 Round: 150 mm Cutting area max. 150 x170 mm Cutting speed: approx. 12-24 m /min Cutting range at 90 flat: 170 x 150 mm Miter cut: adjustable up to 45 Cutting range at 45 Round: 100 mm Cutting area at 45 Flat: 100 mm Cutting range at 60 round: Cutting area at 60 flat: Vice clamping: 155 mm Working height: 700 mm Power transmission: stable gear ratio Saw motor: Bauknecht 380 Volt 50 Hz 0.55/0.75 KW 1390/2780 rpm Total power requirement: 1, KW Weight: approx. 170 kg Location: Rotthalmünster Germany Delivery time: immediately possible Freight base: from stock free loading truck Addition solid design stable ironing guide (adjusta ...

Kat-No 09-1017 New Mash tanks made of V2A with agitator and cooling jacket with 4 x feet, very stable version • with manhole front DN 430 x 310 mm • with residual outlet DN 90 mm (DIN 11851) • with threaded connection connector DN 95 mm top floor "with stable agitator with 5 paddles refurbished • with cooling jacket with 2 x cooling zones - OBEN: 750 mm wide - UNTEN: 500 mm wide • with 2 x transport eyelets • with tap flap DN 37 mm Dimensions: Diameter Zyl:1600 mm Total diameter: 1800 x 1800 mm Total height:4000 mm For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage technology and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share: by scope of delive ...

Cat. No. 12-2945 New Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Topsoil: stable stack crown Manhole lid DN 400 6 x Star Head Eye Screws 1 x Threaded welding nozzle DN 50 with blind cap 1 x Overpressure valve 1 x CO2 ventilation valve Body: 4 x Beading stiffeners Underbody: forward pulled outlet pipe DN 50 Cone floor 4 feet, very stable design with pallet truck underpassable with forklift shoes for fork holder Supplement (on request): Fermentation spandconnection DN Trial tap Blind cap DN 50 Fermented spundar fitting CIP Cleaning The price is for a tank. Weight 85 kg Height 1410 mm Diameter 700 mm Cylinder height 750 mm Material AISI304 (V2A) 1.4301 Test pressure 3.4 bar Construction form vertical Working pressure range +2/-0.15 b ...

The small laboratory press MHSP5 can perform very well with the round stamp (70 mm diameter) deformations of many materials. By delivering fine (0.5 mm per wheel revolution), deformations are carried out very accurately. Small punching or stamping operations are possible. The press is driven by a worm gear screw jacks, which requires minimal hand strength by high reduction ratio. The pressing frame consists of stable-dimensioned polyamide PA6G. Here are some technical data:-static force 5 KN (0.5 to) - portable presses frame made of polyamide PA 6 G, very stable design, with FEM program added - spindle manual jacks 20 mm, pitch 5 mm - with Handwheel diameter 120 mm and handle - gear ratio 1:10, per the Handwheel 0.5 mm screw - table size 235 195 mm - clearance width 190 mm - stamp size diameter 70 mm with 4 holes 8 mm for mounting a major stamp Very easy operation with spindle and w ...

Stable Eletro-thrust mast forklift Wagner Capacity: 1250 kg Lifting height: max 7.1 m 24 volt system - 3 wheel - Tripplingmast smooth starting and driving Stable wide wheel base very guterStand Hydr functions: Lifting - thrust (forward) - tilt - side-shift Truck weight without Batt.: 2680 kg Battery weight: 611 kg Mass approx.: width: 1.71 m length: 1.78 m (eingefah. Thrust mast) Height: run-in mast: 3 m Tine length inside 90 cm Accessories: Charger & battery (used) The truck is in very good used condition vorfuehrbar in stock

Year issue: 2017 - new Capacity: 20,000 cph, complete stainless steel Product: energy drinks and juice Can: 250 ml. Type of can: 202/200 slim can Heating method: Steam - Plate heat exchanger in outside of pasteurizer Material: Stainless steel AISI 304 1. TECHNICAL CHARACTERISTICS OF THE PASTEURIZER Temperature of product (inlet temperature) in pasteurizer: 2? - +6? Temperature of product (outlet temperature) from pasteurizer: +27? - +30? Pasteurizing temperature: +72? - +75? Holding on pasteurizing temperature: 12.5 min Heat consumption (steam by 3-4 bar) during stable operation: 480-550 Kg/h Temperature of steam: +140? Water consumption during stable operation: 0.5 - 0.9 m3/h. Consumption of compressed air 6 bar: 500-700 nl/h Total power consumption: 30 kw Supply voltage: 3F/N/PE/A, 50Hz, Control voltage: 400 volts Degree of protection: IP-54  ...

Professional steel shears for tin locksmiths, assembly plants, Teaching work pieces, particularly stable construction stable application with shear encoder made of encoded steel tooth lever translation lever securing via rotary spring knives made of high-quality tool steel, hoisted and ground continuously adjustable holder cuts of sheets, flat steel steel mm: 18 knife length mm: 175 Net weight kg: 47.5 room requirements approx.0.5x0.25x2 m; ready for use

Machine type TIG inverter welding system gas-cooled DC and AC system Merkle brand Type MobiTIG 180 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 180 amps Duty cycle 20 % ED at 180 amps 60% ED at 110 amps 100% ED at 90 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 355 x 160 x 275 mm Weight 9 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 18 months warranty 1 piece instruction manual List-Werks-Price ex stock  ...

Machine type TIG inverter welding system gas-cooled DC system Make Merkle Type MobiTIG 190 DC Connection voltage 1 x 230 volts Adjustment range 5 - 190 ampere Switch-on time 20% ED at 180 amperes 100% ED at 90 amperes Current adjustment infinitely variable max. weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Fuse 16 Ampere Dimensions L x W x H 355 x 160 x 275 mm Weight 9 kg Age 6 months Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece TIG burner 4 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare part box kpl. Equipped 18 month warranty 1 piece user manual New price €1,590.00 + VAT Price kpl. wi ...

Cargo Tricycle Electric Tipper New vehicle available from stock Description E-Mobile, TUC TUC, Electric Tipper Load Carrier Convertible 1000W/60V , Battery 45Ah with small license plate to drive moped driver's license Loading dimensions L X W X H 120 x 100x x34 + 14 CM RAILING 2 front bench seat Bench with storage compartment Color red 2 speed gearbox for steep mountains Empty weight 265 kg Ab. Total 630 kg ECE Europe-wide expert opinion Stable brakes front discs and rear brake drum Handbrake Lockable seat compartment Tilting tailgate Turn signals and high beam Brake light Reverse beeper Reverse gear Leaf springs on the rear axle for maximum load EU approval, small moped license plate is enough Wheelbase 1915 mm Very good traction even on loose or muddy ground because the weight of the batteries is directly on the drive axle. It lies very well in the curve and  ...

Machine type TIG inverter welding system gas-cooled DC system Merkle brand Type LiteTIG 190 DC Connection voltage 1 x 230 Volt Setting range 5 – 190 amps Duty cycle 25 % ED at 190 Ampere 60% ED at 140 amps 100% ED at 115 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 150 x 240 mm Weight 7.4 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 24 months warranty 1 piece instruction manual List factory price ex stock wit ...

Machine type TIG inverter welding system gas-cooled DC system Merkle brand Type LiteTIG 210 DC Connection voltage 1 x 230 Volt Setting range 5 – 210 amps Duty cycle 20 % ED at 210 Ampere 60% ED at 145 amps 100% ED at 135 amps Current adjustment infinitely variable weldable material thickness 6 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 150 x 240 mm Weight 8 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 24 months warranty 1 piece instruction manual Listen-Werk-Price ex stock with 2 ...

Machine type TIG inverter welding system gas-cooled DC and AC system Merkle brand Type LiteTIG 210 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 210 amps Duty cycle 20 % ED at 210 Ampere 60% ED at 140 amps 100% ED at 130 amps Current adjustment infinitely variable weldable material thickness 6 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 150 x 240 mm Weight 9 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 24 months warranty 1 piece instruction manual Listen-Werk-Price ex st ...

Stable stand sieve swing sieve with 3 decks for wood chips and sawdust. Screen area per deck 8 sqm. Inlet and spouting. Stable drive and steel substructure. Drive motor 5.5 KW. Service flaps. Total length approx. 7.0 m.

The Aerzen blower unit, which was manufactured in 1986, is a reliable and powerful solution for various applications. With an operating pressure of 1.05 bar, it provides the necessary compressed air for industrial processes, ventilation systems or other applications. The blower unit has been carefully manufactured and is characterized by its durable construction and efficient performance. It is designed to generate high airflows while maintaining stable operating pressure. We would like to assure you that we can offer you the best possible price for this blower unit. The price is negotiable, so we can respond flexibly to your requirements. If you would like more details about the blower unit or have any questions, please do not hesitate to contact us. Our team will be happy to assist you and answer your inquiries promptly. Contact us today to learn more about this Aerzen blower  ...

x-travel: 700 mm y-travel: 715 mm z-travel: 850 mm Control: FANUC 16i-MB table-size: 500 x 500 mm table weight: 500 Kg a-axis: +45 / -135 ° c-axis: 360 ° distance table / middle of spindle: - mm number of spindle speeds: 10000 U/min/rpm tool taper: ISO 40 spindle drive: 18,5 / 22 kW rapid travel x/y/z: 70 m/min Tools changer: - pos. dimension of workpiece: dia 725 mm total power requirement: - kVA weight of the machine ca.: 21 t dimensions of the machine ca.: m The machines of the Clock series can also be used as 5-axis multitasking machines. The Clock series is characterized by high speed and precision. paired with a very stable machine concept. Thanks to the fast tool change and pallet exchange, the machines achieve a very high productivity. As 5-axis version the Clock 700 is equipped with a very stable Swivel table equipped. The swivel table is double on the axes and thus guarantees ...

saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180x100 mm Working height: 925 mm saw blade turning speeds: 15 - 70 U/min total power requirement: 1,8/2,2 kW weight of the machine ca.: 0,71 t dimensions of the machine ca.: 1,9 x 1,45 x 2,1 m ACTION PRICE ! High Performance Vertical Circular Saw Hydropneumatic Fully Automatic. (20192) · Miter left 60 ° + right 45 ° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Quiet, powerful worm drive with large Gear ratio, integrated in a stable cast housing for Achieving optimal cutting results · Vice with double clamping arm for low-profile cuts.Additionally with lateral quick shift at miter change · Precision prism guide of the gearhead, laterally adjustable · Particularly stable undercarriage with built-in automatic cooling · Large chip drawe ...

length: 3000 mm Wheel width: 500 ( 450 ) mm work height max.: 880 (+/- 60) mm Description: - 3000 mm roller and measuring track type Exakt A standard - with digital position indicator el. connection 230 V 50 HZ with power pack - Display in mm display (measuring range: +/- 0.5 mm on 1,000 mm) - Measuring stop can be adjusted from the workplace by means of a hand wheel - with pneumatic brake for fixing the dimensions. - Stable material stop trolley, 12 ball bearings - on a large guide profile. - The stop is adjustable and can be folded back manually. - Basic version of roller and measuring track - in stable steel construction, all versions are stationary - The max.measuring length is the track length minus 450 mm - Ball-bearing support rollers Ø 60 x 2 mm - Galvanized conveyor roller with axis Ø 15 mm - Load capacity per meter of roller conveyor approx. 300 kg - Roller pitch 250 mm - Web ...

0: 2.000 kg height: 800 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 800 mm - Width: 1200 mm - Load capacity: 2 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 50 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 5.000 kg height: 800 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 800 mm - Width: 1200 mm - Load capacity: 5 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 60 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 15.000 kg height: 790-1350 mm width: 1200 mm weight: ~ 65,0 kg Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - with height adjustment - CE marking techn. Details: - Height: 790 mm - Width: 1200 mm - Load capacity: 15 to - Height adjustment: 790 - 1350 mm - Support surface: 120 x 120mm - Space requirement approx .: 1350 x 720 x 1350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 2.000 mm height: ca. 660 - 815 mm width: 600 mm Furnishing : - stable construction - high load-stable stability - Height-adjustable feet techn. Details: - Track length: 2,000 mm - Roll width: 600 mm - Height: approx. 660-815 mm - Distance between the rollers: approx. 160 mm - Height adjustable: yes - Number of rolls: 8 pieces - Roll diameter Ø 90 mm - color blue / red The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32,0 mm throat: 255 mm bore stroke: 120 mm morse taper: 4 MK table:: 385 x 335 mm turning speeds: 80 - 2130 U/min total power requirement: 1,1 / 2,2 kW weight: 125 kg range L-W-H: 460 x 900 x 1730 mm Furnishing: - Surface-machined work table - Height adjustable via rack and hand crank - Ground base plate with T-slots for clamping high workpieces - V-belt drive with balanced drive pulleys for smooth running - Adjustable drilling depth stop for precise infeed of the quill - Powerful 2-stage motor, speed range from 80 - 2130 rpm - Direction of rotation switch for clockwise and counterclockwise rotation included in the scope of delivery - Cross line laser device for comfortable work - Compact, stable cast iron construction in a modern design - Stable and polished steel column, designed for heavy use Scope of delivery: - Drill chuck arbor MK 4 / B 18 - Keyl ...

0: 2.000 kg height: 500 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 2 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 20 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 3.000 mm height: ca. 660 - 815 mm mm width: 600 mm Furnishing : - stable construction - high load-stable stability - Height-adjustable feet techn. Details: - Track length: 3,000 mm - Roll width: 600 mm - Height: approx. 660-815 mm - Distance between the rollers: approx. 160 mm - Height adjustable: yes - Number of rolls: 12 pieces - Roll diameter Ø 90 mm - color blue / red The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 5.000 kg height: 500 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 5 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 35 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 25,0 / 30,0 mm throat: 150 mm bore stroke: 120 mm threading: M18 / M22 spindle taper: 3 MK table:: 300 x 270 mm turning speeds: 200 - 4.000 U/min column diameter: 100 mm total power requirement: 0,75 / 1,1 kW weight: 170 kg range L-W-H: 800 x 500 x 1400 mm from a training workshop () New price approx. 4.700 euros Furnishing: - robust bench drill with V-belt drive - Clamp / relax using a quick release lever - stepless speed adjustment - digital speed display - EMERGENCY OFF push button at the front - stable feed handle - stable quill for tool mounting - Thread cutting device - Right / left running of the work spindle - Pole changing motor - manual spindle feed - Height-adjustable work table, using a hand crank - adjustable drilling depth stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine type TIG inverter welding system gas-cooled DC and AC system Merkle brand Type LiteTIG 190 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 190 amps Duty cycle 25 % ED at 190 Ampere 60% ED at 140 amps 100% ED at 115 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 150 x 240 mm Weight 7.4 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 24 months warranty 1 piece instruction manual List factory price ex ...

Machine Type Electrode Inverter Welding Rectifier Ep Systems brand Plant No.: 99J33202 Type W 150 E Connection voltage 1 x 230 Volt Setting range 5 – 150 amps Duty cycle 35 % ED at 150 Ampere 60% ED at 120 amps 100% ED at 100 amps Current adjustment infinitely variable weldable electrode 4 mm Cooling inverter by built-in fan Version portable mounting system Fuse 16 amps Dimensions L x W x H 120 x 300 x 270 mm Weight 4 kg Age approx. 10 years Condition workshop tested good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece electrode cable 16 qmm, 4 mtr. long 1 piece ground cable 16 qmm, 4 mtr. long 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 110 mm 10 DIN 25 pieces rod electrodes Böhler 2.5 x 350 mm 25 pieces rod electrode ...

Sliding table saw Circular table saw Circular saw Carpentry circular saw Format saw WH Machines Type: Z45 - 400E Professional New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 415 mm Cantilever table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cutting to length up to approx. 300cm Electric height adjustment of the saw blade Stable round bar guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the saw unit. Parallel fence up to 125cm with fine adjustment stable 50 mm round rod guide Parallelogram protection device with upper suction foldable away for vertical workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up to 400 mm Cutting height at 90°: 125 mm Scorer wi ...

Sliding table saw Circular table saw Circular saw Carpentry circular saw Format saw WH Machines Type: C45-300E Economy New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 380 mm Grid carriage locking system with operation at the carriage end. Cantilever table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cutting to length up to approx. 300cm Electric height adjustment of the saw blade Stable swivel guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the saw unit. Parallel fence up to 125cm with fine adjustment stable 35 mm round rod guide Parallelogram protection device with upper suction foldable away for vertical workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up  ...

The belt sanding machine Ghermandi Caliber 300 2NT, type CL 300M RT 2N, is a robust and reliable machine, perfect for sanding metals, wood and plastics. With an output of 33.5 amperes and 380 volts, it is particularly powerful and can easily handle even heavy grinding work. The machine has a wide grinding table that provides a large grinding surface and allows precise work. The grinding table is also height adjustable to ensure an optimal sanding position. In addition, the belt sanding machine Ghermandi Caliber 300 2NT is equipped with a powerful motor and a stable belt run, which ensures uniform grinding quality. Thanks to its compact design and sturdy housing, the belt sanding machine Ghermandi Caliber 300 2NT is very durable and easy to operate. It is perfect for craftsmen, industrial companies and workshops that place high demands on their grinding machines. If you are looki ...

Boiler capacity: 270l; Flow rate: 520l/min; Motor power: 4 kW; Refrigerant dryer: Yes; Stationary compressors with vertical 270 l tank Maximum performance in the tightest of spaces. Robust equipment and best quality Fully automatic on-switch operation With all safety devices Completely ready for connection  From 7.5 kW as standard with automatic star-delta switch  Fifteen-year warranty against rust penetration on inside and outside hot-dip galvanized compressed air tank quality electric motor Quality electric motor with high tightening torque is equipped with a motor protection switch start-up capacitor and start-up relief valve ensure easy start standard with phase changer for easy manual reversal of direction of rotation compressed air compression via high-performance unit HOS Start-up relief valve ensures easy, pressure-free start The two-cylinder high-performance engine made ...

Sliding table saw, table saw, circular saw, carpenter's circular saw, format saw WH machines Type: Z45 - 400E Professional New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 415 mm Boom table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cut to length up to approx. 300cm Electric height adjustment of the saw blade Stable round bar guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the sawing unit. Rip fence up to 125cm with fine adjustment Stable 50 mm round rod guide Parallelogram protection device with upper suction can be folded away for upright workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up to 400 mm Cutting height at 90°: 125 mm Scoring blade with 1 ...

Sliding table saw, table saw, circular saw, carpenter's circular saw, format saw WH machines Type: C45-300E Economy New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 380 mm Grid carriage locking system with operation at the end of the carriage. Boom table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cut to length up to approx. 300cm Electric height adjustment of the saw blade Stable swivel guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the sawing unit. Rip fence up to 125cm with fine adjustment stable 35 mm round rod guide Parallelogram protection device with upper suction can be folded away for upright workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up to 3 ...