st used for sale

Control, control part, interface, driving control, driving current control, high-performance impulse control, impulse control -Manufacturer: GSL (German Standard Lift), high-performance impulse control for the drive of working platforms -Type: 1204-406 -Voltage: 36-48 V -Dimensions: 195/145/H75 mm -Weight: 2 kg.

Jack stand, assembly trestle, steel trestle, welding table, assembly table, work trestle, screw trestle -Support stand: steel stand with screw spindle -Adjustable height: 620 - 980 mm -Quantity: 1 piece available -Dimensions: 510/460/H620 mm -Weight: 31kg

Lifting mast, forklift mast, forklift mast, mast, rear stacker -Triplex mast: with free lift -Load capacity: approx. 2000 kg -Lifting height: approx. 3300 mm -Forklift shield: mm -Recording/Dimensions: see photos/techn. drawing -Number: 1x mast available -Price per piece -Dimension retracted: HWD 2070/1190/290 mm -Weight: 580 kg/pc.

Steel stairs, external stairs, machine stairs, machine steps, add-on stairs -Design: stable design, as a machine step -Step size: 600 x 260 mm -Height: upper step 200 mm -Total dimensions: 590/620/H220 mm -Weight: 28 kg

Steel stairs, external stairs, machine stairs, machine steps, add-on stairs -Design: stable design, as a machine step -Step sizes: 500 x 300 mm -Height: upper step 320 mm -Dimensions: 760/590/H400 mm -Weight: 56 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 220 mm -Piston rod: Ø 125 mm -Cylinder tube outside: Ø 271 mm -Stroke: measured 945 mm, according to the nameplate 926 mm -Total length retracted center center hole: 1695 mm -Piston rod holder: Ø 100 mm -Admission cylinder: Ø 100 x 70 mm -universally applicable: -Number: 4 pieces available -Price: per piece -Dimensions: 1950/271/H371 mm -Weight: 448 kg

Winch rope, crane rope, hoist rope, wire rope, steel rope -Wire rope: Ø 10 mm -Length: 4 m -for: electric wire rope hoist -Also other crane ropes: available -Weight: 1.45 kg

Cable pull, wire rope, steel cable, multi-purpose pull, gripping pull -approx. 20 m rope for: multi-purpose hoist on hand reel -Rope diameter: 15 mm -Dimensions: 430/300/H470 mm -Weight: 29 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 220 mm -Piston rod: Ø 125 mm -Cylinder tube outside: Ø 260 mm -Stroke: 495 mm -Total length retracted center center hole: 1195 mm -Piston rod holder: Ø 100 mm -Cylinder holder: Ø 100 mm -universally applicable: -Number: 14x cylinders available -Price: per piece -Dimensions: 1360/530/H300 mm -Weight: 364 kg/piece

Stainless steel couplings, pipe coupling -Type: FLEX 1L -Inside: Ø 60.3 mm -From: 59.0 to: 61.5 mm -Pressure: 25 bar -Dimensions: 82/92/H75 mm -Weight: 0.6 kg

Stainless steel couplings, pipe coupling -Type: FLEX 1L 114.3 -Inside: Ø 114.3 mm -From: 112.5 to: 116.0 mm -Pressure: 21 bar -Dimensions: 150/150/H95 mm -Weight: 1.1 kg

Cold room lock, cold room lock, mortise worm lock, cold room door lock -Manufacturer: STUV, cold storage lock unused in original packaging -Type: 3.16.416.2 Links -Quantity: 10x door lock available -Price per piece -Dimensions of box: 260/150/H40 mm -Weight: 1.1 kg/pc.

Cold room lock, cold room lock, mortise worm lock, cold room door lock -Manufacturer: STUV, cold storage lock unused in original packaging -Type: 3.16.415.2 Links -Quantity: 6x door lock available -Price per piece -Dimensions of box: 260/150/H40 mm -Weight: 1.3 kg/pc.

Cold room lock, cold room lock, mortise worm lock, cold room door lock -Manufacturer: STUV, cold storage lock unused in original packaging -Type: 3.16.416.1 KRT lock V2A -Quantity: 6x door lock available -Price per piece -Dimensions of box: 260/150/H40 mm -Weight: 1.1 kg/pc.

Nominal force, kN 1600 Slider stroke, mm 320 Distance between table and slide, mm 320 Distance between table and slide, mm 320 Main drive motor power kW 16 Table size width / length mm 580/650 Machine dimensions Length Width Height (mm) 2560_2020_3840 Weight kg 11000

number of feeders: 6 max. speed: 9000 /h max. paper size: 31,1 x 35,5 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fasson gluer type SFAM 716 with display mounting station Suitable for full, façade, edge or strip gluing. A high gluing and repetition accuracy of the gluing is guaranteed. Suitable for different substrates - such as open formats, die-cut blanks, etc. made of corrugated and solid cardboard, rigid foam boards, etc. • Sheet system by means of drive chains, also for complicated cuts • High register accuracy • Working width: 2,050mm • Output: 1-lane approx. 4-20 cuts/min; 2-lane approx. 8-40 cuts/min • Cutting thickness: approx. 0.5 to 20mm • Sheet control • Easy adjustment and correction of the register via the display, even during production Consists of: Fasson—Banding machine type SFAM 716 Display Workbelt Type 5A/1650 PRESS BELT Type 5/1650_D.4 Assembly station

Hot-dip galvanized steel hall [hL53.6m x hW15.6m x dH6.5m / fH7.6m] dismantled from stock. HALL STRUCTURE: the hot-dip galvanized primary structure consists of 9 main frames (IPE 450 frame columns, IPE 300 frame trusses) as well as 2 lightweight end wall constructions (HEA 140 corner supports, HEA 160 internal supports, HEA 120 gable wall transoms) of steel grade S 235 JRG2 (St 37), and the secondary structure consists of hot-dip galvanized lightweight profiles, i.e. roof purlins such as eaves purlins made of Sigma profile SE250/100/30/15/2.5 mm and C-profile wall beams C+150/90/43/15/3 mm of steel grade S355 JRG3 (Lv. 52). The bracing consists of pressure pipe diameter 70 x 2.6 mm as well as roof and wall diagonals made of round steel (diameter 16 mm). ROOF: Hösch Isorock Integral D 115 MW roof panels, component width 1000 mm, sheet thickness 0.50 mm inside and outside (core thickn ...

It is a used but durable hall construction which could also serve as a ball sports / football hall, equestrian sports hall and much more in the future. The steel frames are self-supporting and have a height of almost 11 meters in the ridge (in the middle). APPROXIMATE DIMENSIONS: Floor area: 2560 sqm built-up BG area; | Hall length: 65.50 m AK wall + boiler room; | Hall width: 39.09 m AK wall planking; | Eaves Height: 4.27m UK Roofing; | First - Height: 10.70 m OK Roofing; | Roof pitch: 18.75 degrees sym. gable roof; | STRUCTURE: Solid, articulated steel frame construction, with steel frames made of rolled sections mounted on point foundations or rails. The end frames or gable wall constructions are made of rolled profiles. Purlin line made of hot-rolled roof purlins. The 2 middle hall segments stand on rails so that the hall can be opened in good weather. FA ...

number of feeders: 4 max. speed: 9000 /h max. paper size: 31,1 x 35,5 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stehendbogenauslage mit Markiereinrichtung - Horizontal Stack Delivery with Pressing - Marking Stahl SBP 46.2 Year 1994 - Serial-No. 49504/94-218513 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Falzmaschine - Folding Machine Stahl T 36/6-6-KB Baujahr / Year 1997 Flachstapelanleger / Flat Pile Feeder Falztyp: 6 Taschen - 6 Taschen - Schwert Folding Type: 6 buckles - 6 buckles - 1 knife Format / Size: min. 80 x 100mm - max. 360 x 650mm Papiergrammatur / Paper weight: 40 – 250g/m² Stapelhoehe / Pile height max. 580mm Geschwindigkeit / Speed min. 10 m/min. - max. 160m/min. Durchmesser Falzwalzen / Diameter of folding rollers 32mm Auslage Schuppenauslage / Delivery Stream Delivery Kompressor / Compressor include - Manuals Included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect

Manueller Handstapler / Manual Hand Stacker Carl Stahl FL 600 Baujahr / Year 2000 - Serial-No. 13557 Tragkraft / Capacity max. 600 kg Eigengewicht / own weight 210kg Hubhoehe / Lift high max. 1600mm Gabel Laenge / forks length 1.150 mm Lastschwerpunkt / Load Center 600 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Steel stairs, external stairs, attached stairs -Steel stairs: Add-on stairs with gratings and railings on both sides -Width: 880mm -Step spacing: approx. 200 mm -Dimension of top step: 1940 mm -Transport dimensions: 3880/880/H970 mm -Town weight: 150 kg

Horizontal stack delivery with pressing and marking device Stahl SBP 46.2 6 Serial-No. 47105/93-202516 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Stehendbogenauslage mit Presswalzenauslage - Horizontal Stack Delivery with Pressing Stahl SBP 40 Year 1979 - Serial-No. 14256/79 Size width max. 400mm Vertical press delivery -modified with SELFControl- -Online-Video-Inspection by Live-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

We offer Compressed air tank Flamco STAG 3000 l 16bar 60°C from compressed air system Picture 1-3 The system is part of a compressed air system in a production hall. It is used, built in 1995/2016, and fully functional, in very good condition and is offered by our customer due to restructuring of the hall use. The display will be updated even further specifications: - Manufacturer: Flamco STAG Behälterbau Genthin - Model: 3000l - Year of construction: 1995 - No.: 59457 - TüV.: still available -Ab. Operating pressure : 16 bar -Ab. Cleaning temperature: 50°C - Type marking : CU 295/6 - Dimensions: D 1200 x H 3000 mm estimated - Weight: 704 kg The container is still in our customer's factory in Halle all. The sale is carried out ex works EXW (loading possibility available). The compressed air system also consists of: Screw compressor Kaeser CS 121 Bj.1995 ...

STANDARD’s 700DD Series pumps are engineered to transfer viscous materials from drums, Intermediate Bulk Containers (IBC) and large storage vessels. Utilizing the principle of positive displacement, these pumps deliver a continuous flow of material with little product degradation. Pump is provided with a 1.5 kW TEFC electric motor. Technical Specifications: Design Progressive Cavity / Positive Displacement Max. Viscosity = 100,000 cps (mPas) Discharge Port 1½ (38 mm) Hose Barb Stator Materials PFTE Mechanical Seal SiC / Viton®/ SiC Immersion Length: 1120 mm Wetted Material Tube & Rotor Assembly: Stainless Steel 316 Stator Material PFTE Motor Drives IEC Fittings Threaded design enables operator to disassemble pump quickly for cleaning, maintenance and inspection Mounting Flange B14/C140-160 Max. Flow Rate: 26 LPM based on water Max. Discharge Pressure: 12 bar Max ...

Presstation / Press station Stahl PS 46 Year 1988 - Serial-No. 26184 Arbeitsbreite / Working width max. 460mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Used Stephan Model UM 12 high intensity/universal vacuum mixer. Stainless steel jacketed mixing bowl has total capacity 15 litre, working capacity approx. 12 litre. Bowl rated -1/atmospheric pressure at 95°C max. temperarure. Stainless steel nonpressure jacket capacity 0,8 litre, 95°C max. temperature. Has bottom S-blade type of agitator driven via dual speed el. motor 1.5/1.9 kW, 1420/2810 rpm, 50 Hz, 400 V. The vessel has top entry manual teflon wall scrapper. Integrated el. switchboard with local control panel. Also includes vacuum pump DVP Vacuum Italy model LB.5WR and el. heater Thermo Haake model C10 with circulation pump for heating jacket.

It is a thermally insulated lightweight hall (built in 2008), whose hot-dip galvanized supporting structure and sandwich cladding together with various equipment can be reused. DIMENSIONS according to construction documents: Covered area: 375.00 square meters; Width of the hall: 25.00 m AK wall; Length of the hall: 15.00 m AK wall; Frame spacing: 5.00 m MM frame supports; Eaves height: 5.24 m at the intersection of roof and wall; Ridge height: 7.30 m building height; Purlin spacing: 2.50 m floor area / 2.54 m roof pitch; Wall beam spacing: 2.50 m; Roof pitch: 10 degrees, symmetrical gable roof; LOAD ASSUMPTIONS: Wind load: 0.59 kN/m2 (DIN 1055-4 March 2005). Snow load: 1.25 kN/m2 (DIN 1055-5 July 2005). Seismic zone: 3 (DIN 4149-4 April 2005). STRUCTURE: The primary structure consists of hot-rolled and hot-dip galvanized IPE solid profiles. Main f ...

Option to purchase a hall ensemble of approx. 6000 m2 in total (90 x 66 x 6.3 / 8.3 m) or parts thereof. 3-span steel hall in portal construction, which will soon be dismantled. It is a thermally insulated hall, whose supporting structure and most of the cladding as well as various accessories can be reused. APPROXIMATE DIMENSIONS Covered area: approx. 6000 m²; Width of the hall: approx. 66.40 m AK wall Wingspans: approx. (15 + 15) + 15 + 21 m center-center supports; Length of the hall: approx. 90.40 m AK wall; Frame spacing: approx. 5.00 m MM truss; Eaves height: approx. 6.30 m at the intersection of roof and wall; Ridge height: approx. 8.30 m building height; STRUCTURE: The primary structure consists of hot-rolled Euro profiles (IPE and HEA / HEB). The secondary structure to support the building envelope is made of galvanized strip steel and cold-form ...

Description: Consisting of polishing stand with brush, polishing stand with sanding plate, double bench grinder from the manufacturer SOLID (type: DS0, speed: 2990 rpm) Total table dimensions: approx. 1000 x 650 mm Approx. Onsite Dimension. (l x w x h): 1,100 x 950 x 1,300 mm, weight approx.: 600 kg

S/s cooking, steaming & baking cabinet with trolley, trolley dimensions: 1020 mm x 1070 mm x 2000 mm, total dimensions: 1880 mm x 1360 mm x 2800 mm.

Type : Eurobins Materials : Stainless steel Volume : 200 Litres Quantity available : 6 units Dimensions : approx. 70 X 70 X 70 cm

Description: Carpet width: 1100 mm  ,  , Internally equipped with a hard rubber roller and a steel roller with adjustability. Mountable canvas maximum dimensions: 1100 x 1910 mm. Approx. Onsite Dimension. (l x w x h): 1,900 x 1,900 x 2,100 mm, weight approx.: 2,500 kg

Stainless steel trolley for trays 60 x 80 3 sides closed front with door Cabinet mobile Used appliance cleaned More TOP stainless steel furniture in stock!

Stöcklin automated pallet infeed and outfeed system, year of construction: 2008, 5-lanes from pallet storage to loading docks and manual infeed/outfeed, steel rollers, roller width: 900 mm. Lane 1: infeed from shuttle 1 to pallet storage, capacity line 1: 88 pallets per hour, Lane 2: outfeed from shuttle 2 to pallet storage, capacity line 2: 54 pallets per hour, Lane 3: infeed for from manual infeed to pallet storage, capacity line 3: 72 pallets per hour, Lane 4: outfeed pallet storage to (2x) manual outfeed, capacity line 4: 72 pallets per hour, Lane 5: infeed from sorting lane, capacity line 5: 42 pallets per hour, capacity shuttle 1: 63 per hour, capacity shuttle 2: 63 per hour, including: (3x) Altek Hebetechnik GmbH lifting platform for pallets and (2x) pallet elevator, lifting height: approximately: 4500 mm, total dimensions room: 27500 mm x 24000 mm.

Pallet storage system, 10 lanes, steel rollers, roller width: 830 mm, total dimensions: 26000 mm x 13500 mm x 3800 mm.

Stöcklin Logistik AG 7-lanes cooled pallet storage system for euro H1 pallets with 7 Stöcklin pallet robots, lane dividing roller conveyor, steel platform, protection frames, several evaporators and sprinkler system. Stöcklin 7-lanes pallet storage, year of construction: 1978, 7 Stöcklin pallet robots, type: RBG S0-T, serial numbers: 2329.08, 2330.08, 2331.08, 2332.08, 2333.08, 2334.08 and 2335.08, year of construction: 2008, capacity: 800 kg, weight per robot: 1600 kg, height robots: 12000 mm, steel rollers, roller width: 1000 mm, dimensions lane dividing roller conveyor: 29000 mm x 1250 mm 500 mm, total dimensions line 1 t/m 3: 110 meter x 12800 mm x 12000 mm, total dimensions line 4 t/m 7: 110 meter x 17000 mm x 12000 mm. With 6 Güntner evaporators, Without cooling compressors.

Cylindrical Cone Fermenting Tanks CCT 8 x 150hl Cylindrical cone fermenting tanks (CCT) with net capacity 150hl. Tanks are vertical indoor type with 80 mm PU insulation, self-standing on four legs, with three (glycol) cooling zones, two on the side + one in cone. Tanks have cooling control system for each tank and each zone separately, sampling valve on outside on tank skirt, two CIP panels which are connected to tanks, inside tank rotating CIP ball and normal under pressure and overpressure safety valves on top of thanks. Generally, tanks are in good condition, and they have a high hygienic level. These CCTs have a dedicated chiller made by made by Italian Rhoss S.P.A in year 2015. Compressor is a scroll type, rotary, hermetic and with Inverter actuation (1+i) complete with thermal protection and casing heater. Cooling refrigerant is Freon R410R. Chiller is air cooled by two axial f ...

Description: Load capacity 0.4 t, gripping range 332 mm, serial test number 3162553 Approx. Onsite Dimension. (l x w x h): 800 x 680 x 2,150 mm, weight approx.: 105 kg

Description: each 1100 x 800 x 710, load capacity 6000 kg, width approx. 1000 mm, height approx. 700 mm Approx. Onsite Dimension. (l x w x h): 2,000 x 1,000 x 800 mm, weight approx.: 300 kg

Description: Surface load 5000 kg, length approx. 1000 mm, height approx. 850 mm Approx. Onsite Dimension. (l x w x h): 1,050 x 1,010 x 900 mm, weight approx.: 180 kg

I offer hydraulic shears not sheet metal marked NTA 3150/10A manufacturer Strojáreň Piesok. The maximum cutting length is therefore 3150 mm and the strength of the structural steel sheet is 10 mm. Plugged in, fully functional, but so rarely used that its not worth my while to keep them. (they do not fit into our primary production segment) Price negotiable, buyer arranges transport, total weight 14,000 kg Possibility of viewing, testing - at the Chrudim facility

There are 7 lift stacker (low and high lift) with chargers and batteries available. Riders: 3x Linde D14AP double-decker, operating hours: (2876h, 3354h, 3005h). 1x Linde L14LAP, operating hours: 823h. Carrier: 1x Linde D14AP double-decker, operating hours: 2500h. 1x Linde T20 (low pusher truck), operating hours: 2192h. 1x Stöcklin stainless steel pusher, operating hours: 3500h. 2x batteries for the D14 AP, 1x battery for the L14LAP driver, 6x chargers. Available from July, 2024.

Stainless steel container with manhole 500 litres capacity Derivative: NW 50 Dimensions in cm: 120 height x 93 length x 74 width

Horizontal side channel pump Materials: - Case: 1.4581 - Wheels: 1.4408 - Wave: 1.4571 Housing sealing: single-acting sliding ring seal, carbon/silicon carbide/viton Version A6: Pump mounted on base plate elastically coupled with 1.35 kW IEC standard rotary current motor Pressure: 2 bar Power: 800 l/h Revolutions: approx. 1,450 rpm Rated frequency: 50 Hz Engine power: 230/400 V Protection class: IP 55 Type of protection: E Ex eII T3 Type of construction: B3 Pumps partly unused, therefore in very good condition!

GranitoGrav photo-gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, commemorative plaques, tiles, glass, mirror glass ... Load colour photos or photos in black and white into the CAD-CAM ConstruCAM 3D software via the specially developed module. You can then enter the output of the desired size and have milling paths calculated. This created file is opened in the machine's control software and therefore sent to the machine. - More is not necessary! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical and short time and thus creates first-class photos in all the above-mentioned materials with the CNC machin ...

GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. The CNC milling machine series High-Z/400-T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! The CAM software works off your data accurately and in a very short time and created excelle ...