sst used for sale

Spreading attachment Schmidt SST 20 – OAXN MITOS, wet salt spreader with conveyor screw. For Unimog, trucks with municipal hydraulics. Content 2 m3, Sole 860 ltr.. Equipment with tarpaulin folding roof, storage stand, height-adjustable, remote control, Optional PTO pump and hydraulic oil tank available. More winter service technology available - see example photos!

2014 Dimension SST 1200ES - washer included and a lot of washing ”powder” and build plates. - Trolly

Control Panel Display Miwe FP 12 SST for Aero Ovens -Control panel display for Miwe in-store ovens -for Miwe Aero, Miwe Econo, etc.

Steam turbine Siemens SST400 Year: 2011 Disassembled and put in a storage. Very low working hours. Power:30mW Voltage:10.5kV/50Hz Fuel: Biomass Generator: SGen5-100A-4P Turbo gear unit Flender-Graffenstaden TX80/3 Transformer Siemens S10-40000/110 Condenser Full set of manual books No boilers, no voltage control cabinet (7) Steam turbine Siemens SST-400 Year: 2011 Never used and never installed. Still in original wooden crates. Packing lists. 7 sets available Power:30mW Voltage:10.5kV/50Hz Fuel: Biomass Generator: SGen5-100A-4P Control system Accessories Full set of manual books No boilers Price: on request

Steam turbine for sale. The turbine was built in 2012, is in good condition and is no longer in operation. Model SST-060 Turbine with impeller in so-called constant-pressure design ("action wheel"). The turbine rotor is mounted on two bearings and consists of the above-mentioned impeller and a shaft, which are connected to each other by means of Hirth gearing. The impeller is located outside the bearing and consists of one piece. The blades are milled out of the solid disc. Live steam pressure: 13.0 ´bara at turbine flange Live steam temperature: 191.6 ´C at turbine flange Live steam flow max: 10,000 kg/h Exhaust steam pressure: 5.2 bara at turbine exhaust flange Turbo generator sound pressure level: 92 dB(A) z 3 dB(A) measured at a distance of 1 m Coupling power: 275kW Total terminal power: The tolerance is 1.0%. 265kWe The pressure drop for the cyclone to be provided sh ...

Manufacturer: Hidrostal Model: F10K-SST+F2310-L Pump Type: Screw centrifugal pump Material: Stainless Steel Find more here - / Contact us at -

Capacity: 3,224 kW Volts: 400 HZ: 50 Condition: Very Good Scope of Supply: Complete Turbine Power Station with turbine and alternator, Control Panel, Condensor, Cooling Towers, Spilling Unit, Switchgear, Synchronisation panel, Transformer, Piping / wiring / pumps. Total cost for power plant components was around 3 million on the actual power plant components. Nominal Steam requirement to run the turbine is 17, 5 t/h at 29 barg & 350 °C. Available for sale from Gas Engine Exchange . Please check our full range of equipment at gasengineexchange.com.

Single-swing jaw crusher with an internal width of 500 mm x 350 mm. The lower gap is adjustable from approx. 30 to 80 mm. Throughput (depending on the selected gap width and the material to be crushed): Between 9 and 30 tons/h. The crusher ran smoothly until the removal and the scope of delivery includes 2 suitable, unused crushing jaws. Additional spare parts / wear parts are available for an extra charge.

Machine Type: Steam Turbine Manufacturer: Siemens (formerly KK&K or Kühnle, Kopp & Kausch) Model No.: SST-060 Serial number: 4.345.107 Year of Make: 2016 Operating hours: 0 h Condition: new, has never been put into operation Power: 1,047 kW Live steam parameters: 29.0 bar (26.0-34.0 bar), 480 °C (430-500 °C) Evaporation parameters: -0.36 bar (max. 0.50 bar), 425 °C Generator: AvK, 400 V, 2,165 A, 50 Hz, 1,500 kVA, cos φ 0.80 Dimensions: approx. 5.0 m long x 2.8 m wide x 2.8 m high (turbo generator set without control cabinet and ancillary systems) Scope: turbine, gearbox, generator, oil generator, oil cooler, control cabinet

Manufacturer: Siemens Model: SST-060 Year of Manufacture: 2016 Output Power: 1006 kW (nominal) Speed: 1500 rpm (nominal) Trip Speed: 1605 rpm Live Steam (Inlet Pressure): - Min: 20.6 bar - Nominal: 23.0 bar - Max: 25.4 bar Live Steam (Inlet Temperature): - Min: 300 °C - Nominal: 350 °C - Max: 378 °C Exhaust Steam (Outlet Pressure): - Min: 2.10 bar - Nominal: 3.10 bar - Max: 4.10 bar Exhaust Steam (Outlet Temperature): - Max: 331 °C Find more here - / Contact us at -

General SKU373X908 LocationBarneveld MakeNiro Atomizer TypeSST 208 B No.5032 Year of constructionunknown Main Features MaterialStainless steel Motor0.55 KW Inlet diameter210 mm Specified Features - Rotating valve MaterialStainless steel 1.4401 (316) Rotary valvecheck Rotor diameter200 mm Rotor width200 mm Number of locks:6 Lock sizes80x180x40 mm Capacity6 l. every rotation InletDia. 210 mm Outlet225x165 mm Installation height410 mm With motor0,75kW, 500V, 1400 rpm (Ex) With variable speed drivecheck Rotor speedcould be 40rpm Capacity19,2m³/h Information Total height0,41 m Weight100 kg Floorspace1,3x0,35 m ATEX compatiblecheckRotating valvesNiro AtomizerRotary valves > Rotating valvesBrand > Niro Atomizer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwid ...

General SKU373X906 LocationBarneveld MakeNiro atomizer TypeSST 208 No.5102 Year of constructionUnknown Main Features MaterialStainless steel Motor0.55 KW Inlet diameter210 mm Specified Features - Rotating valve MaterialStainless steel 1.4401 (316) Rotary valvecheck Rotor diameter200 mm Rotor width200 mm Number of locks:6 Lock sizes80x180x40 mm Capacity6 l. every rotation InletDia. 210 mm OutletDia. 150 mm Installation height1050 mm With motor0.55kW, 220V, 1420 rpm, (Ex) Rotor speed40 rpm Capacity19,2m³/h Information Total height1,4 m Weight290 kg Floorspace1,0x0,7 m ATEX compatiblecheck Extra Specificationswith ball segment valve: height ball segment valve: 350 mm inlet/ outlet dia. 150 mm Rotating valvesNiro AtomizerRotary valves > Rotating valvesBrand > Niro Atomizer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price ...

INDUSTRIAL TUMBLER DRYER MACHINE DE CROWN SST-200 BODY MATERIAL: STAINLESS STEEL SUS304/MILD STEEL. CAPACITY (MAX.WET) : 90KG DIMENSION: 2050mm(L) x 1800mm(W)x2200mm(H) POWER SUPPLY: 415VAC 3PH 50HZ. DRUM DIMENSION: 1480mm (OD) x 990mm(L) DRUM SPEED: 29 RPM. information contact: Ms.Supawadee Kumpone, Manager Procurement, F6 email: supawadeegreatglove.com Tel : +6693-7478585 Office : +6676-620190 Ext : 194 Ms.Wilawan Sakulsongboonsisri, DGM Finance,F6 Tel : +6689-1969222 Office : +6676-620190 Ext : 111

INDUSTRIAL TUMBLER DRYER MACHINE DE CROWN SST-200 BODY MATERIAL: STAINLESS STEEL SUS304/MILD STEEL. CAPACITY (MAX.WET) : 90KG DIMENSION: 2050mm(L) x 1800mm(W)x2200mm(H) POWER SUPPLY: 415VAC 3PH 50HZ. DRUM DIMENSION: 1480mm (OD) x 990mm(L) DRUM SPEED: 29 RPM. CONDITION : MOTOR DAMAGED NEED TO REPLACEMENT THE NEW MOTOR

For sale is a Dimension SST 1200 3D printer from Stratasys. Details: Technology: FDM Max. print size: 254 x 254 x 305 mm Supported Material: ABS Nozzle is clogged and needs to be cleaned! some filament spools and platforms are included The printer is in a used but well-preserved condition, after cleaning the nozzle and drying the material, the printer is ready for use again.

Single professional FDM 3D printer using ABSplus filaments to create prototypes and models functional, thanks to its soluble support technology that allows complex geometries. It has a print volume of: 254×254×305 mm (10\" x 10\" x 12\") and offers layer resolutions of 0.25mm - 0.35mm. Item sold in NOT verified status. Item not subject to sales restrictions. Auction-ID: A7-45186-4

Single professional FDM 3D printer using ABSplus filaments to create prototypes and models functional, thanks to its soluble support technology that allows complex geometries. It has a print volume of: 254×254×305 mm (10\" x 10\" x 12\") and offers layer resolutions of 0.25mm - 0.35mm. Item sold in NOT verified status. Item not subject to sales restrictions. Auction-ID: A7-45186-3

Single professional FDM 3D printer using ABSplus filaments to create prototypes and models functional, thanks to its soluble support technology that allows complex geometries. It has a print volume of: 254×254×305 mm (10\" x 10\" x 12\") and offers layer resolutions of 0.25mm - 0.35mm. Including washing machine. Item sold in NOT verified status. Item not subject to sales restrictions. Auction-ID: A7-45186-1