sr 2000 used for sale

Description: Full electric stacker. Rated load:1000kg. Load centre distance:500mm. Lift height:2000mm. Total height when lowered:1580mm. Max height after lifting:2480mm. Handle height form the ground:1200mm. Wheel:pu. Drive wheel size:ф210×80mm. Balance wheel size:ф100×55mm. Load wheel size:ф80×680mm. Total length(pedal no open):2070mm. Total width:800mm. Fork size(plank press):60x170x1100mm. Turning radius:1600mm. Lifting speed(no load/full load):0.08/0.1m/s. Falling speed(full load):0.15/0.12m/s. Drive speed(full load/no load):4.5/5km/h. Climbing ability(no load/full load):5/15%. Lift motor:2.2kW. Drive motor:1.2kW. Battery :24V/80Ah x1 The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 780 x 1,900 x 1,590 mm, weight approx.: 465 kg

Description: Load capacity: 1000kg. Lift height:2000mm. Load center distance:500mm. Fork ,minimum ,clearance ,from ,the ,ground:40mm. Turning ,radius:1425mm. Minimum ,channel ,requirement:2305mm. Total ,length:1735mm. Total ,body ,width: 800mm. Fork ,width:320-1000mm. Fork ,size ,(hammered):110016050mm. Lifting ,speed ,(full ,load/no ,load) ,(m/s) 0.08/0.1. Driving ,speed ,(full ,load/no ,load) ,(km/h) 4.5/5.5. Falling speed(full load/no load) (m/s) 0.12/0.15. Tire:Nylon . Battery:12V/120 Ah The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 800 x 1,700 x 1,580 mm, weight approx.: 500 kg

Description: Rated load:2000kg. Load centre distance:500mm. Lift height:1600mm. Total height when lowered:2080mm. Max height after lifting:2080mm. Handle height form the ground:1200mm. Wheel:pu. Drive wheel size:ф210×80mm. Balance wheel size:ф100×55mm. Load wheel size:ф80×680mm. Total length(pedal no open):2070mm. Total width:800mm. Fork size(plank press):60x170x1100mm. Turning radius:1600mm. Lifting speed(no load/full load):0.08/0.1m/s. Falling speed(full load):0.15/0.12m/s. Drive speed(full load/no load):4.5/5km/h. Climbing ability(no load/full load):5/15%. Lift motor:2.2kW. Drive motor:1.2kW. Battery :24V/80Ah x1 The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 780 x 1,840 x 2,080 mm, weight approx.: 650 kg

plate width: 2000 mm plate depth: 2000 mm plate height: 310 mm weight: 2930 kg dimensions of the machine ca.: 2000 x 2000 x 300 mm Clamping plates - Clamping cube - Plate field 2000 x 2000 x 310 mm If you have not found the size you need, you can also send us an e-mail send us an e-mail with the filled PDF form. With this we can to produce an individual panel for you. Number of grooves: 7 edge distance: 85mm groove spacing: 270mm groove width: 28mm Casting quality HT250 Flatness less than 0,12mm. Surface machined according to DIN 876/III 2x in stock The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used chamber filter press / filter press Rittershaus & Blecher / R & B 2000 x 2000 Plate size: 2000x2000mm Cake thickness: 20 mm / 30 mm Useful length: 12000 mm Chamber number: 121 units Filter pressure: 15 bar Closing pressure: min. 300 bar / max. 320 bar Cake volume: approx. 8.1 m3 Expiration: closed Plate material: PP

length: 2000 mm width: 2000 mm height: 3000 mm weight: 8,2 ton

length: 2000 mm width: 2000 mm height: 3000 mm weight: 8,2 ton

2000 Ltr Roversi butter Churn Double jacketed to avoid the hiumidity, see-through glass, fins inside the churn to brake down the butter and control panel self mounted. Make: Roversi Tank Volume : 2000 ltr Cream Capacity : Min 500 Litres To 1000 Litres Double jacketed 1 Door with safety closer See through glass Stainless steel production area Hzjsulook Skid mounted VISIT & INSPECT : DERBY UK, DE24 8HL , UNIT 6 ,Dairy Machinery UK Site.

Used Decrater APE INCA 2000 UP TO 8000 Bph Efficiency and Precision in Bottling of the Decrater Ape inca 2000 Firstly in the bottling sector efficiency and precision are paramount The Used Decrater APE INCA 2000 up to 8000 Bph stands out as technologically advanced It specifically meets the industrial decrating needs Handling and Mechanical Movement Moreover the APE model 2000 decrater excels in its operation It adeptly handles two crates of 12 bottles each Furthermore the mechanical head movement ensures precise handling This is crucial for preventing bottle damage Flexibility and Adaptability of the Decrater Ape inca 2000 Additionally flexibility is a significant strength of the Used Decrater APE INCA 2000 It features a variable bottle grip head which easily adapts to different bottle diameters Therefore the machine proves to be versatile and efficient Variable Production Speed Importa ...

Counting and banding machine ATS US 2000 FSB-DBN-T; State as is; should be installed by ATS Customer Service; suitable for processing banknotes; Rontech MF-360 RAV counting feeder; 1x Banderolier ATS US 2000 AD bandwidth 40mm and frame 260x260mm; 1x Banderolier ATS US 2000 AD Bandwidth 30mmund Frame 260x120mm; Turning unit installed. Count and banding machine ATS US 2000 FSB-DBN-T; condition as is; should be installed by the support of ATS; used for banknotes; count feeder Rontech MF-360 RAV; 1x banding machine ATS US 2000 AD with band width 40mm and frame 260x260mm; 1x banding machine ATS US 2000 AD with band width 30mm and frame 260x120mm; turning station.

ANAYAK PERFORMER 2000 CNC milling machine built in 2007 in Spain, uses a torsion milling head with automatic positioning in the A+B planes for precision machining of larger workpieces, weighing up to 5000 kg. The machining process is carried out on an easily accessible work table of the milling machine, with dimensions (L x W) of 2200 x 850 mm, in X,Y,Z axes with feed rates of 2000 (X axis), 1000 (Y axis) and 1000 (Z axis). The CNC bed milling machine has a highly efficient spindle with two-stage speed adjustment from 60 to 3000 rpm, ensuring a significant reduction in milling time. The machine also features, among others, a control panel with HEIDENHAIN iTNC 530 CNC control, cooling through spindle and RENISHAW RMP60 workpiece probe. The CNC bed type milling machine weighs 14000 kg. Technical parameters of the ANAYAK PERFORMER 2000 machining centre - work table area (L x W): 2200 ...

C 6250 x 2000 conventional lathe was manufactured in 2010 in China. The machine, characterised by a rigid design with an induction-hardened bed significantly increases the production capacity of any workshop and factories with the utmost precision. The spindle, with adjustable speed from 11 to 1600 rpm is driven by a reliable and high-powered main motor, which is used for versatile tool use. The C 6250×2000 universal lathe with digital readout in three axes weighs 2640 kg. Technical data of the C 6250 x 2000 metal lathe - maximum workpiece length: 2000 mm - turning length in bridge choice: 210 mm - workpiece diameter (turning in bridge choice): 720 mm - workpiece diameter (turning above bed): 500 mm - workpiece diameter (turning over slide): 300 mm - longitudinal feed range: 0.028 – 6.33 mm/rev - transverse feed range: 0.014 – 3.16 mm/rev - maximum spindle speed: 1600 rpm ...

This Tornos-Bechler DECO 2000/13 manufactured in the year 2000. Operated through a Fanuc PNC-DECO control unit, this machine incorporates a head speed of up to 10,000 rpm. Includes a charger for bars from 4 mm to 26 mm in diameter. Presents perfect conditions Brand: Lathes-Bechler year 2000 MODEL: DECO 2000/13 production hours: 55,000 application type: Turning Location: Spain machine type: lathe Availability: Immediate Control unit brand: Fanuc General data Machine length: 1260 mm Machine width: 2000 mm Machine height: 1950 mm Machine weight: 3000 kg Control unit Brand: Fanuc Model: PNC-DECO main transmission Spindle speed range: 100-10000 rpm 1/MIN Half Main current type: 400 V Power consumption: 13KVa Technical benefits of the machine: - 10 axes - Robobar charger ssf-226 for bars from 4 mm to 26 mm in diameter Qualitative benefits of the machi ...

Explore the highly efficient Double Shaft Belt Mixer by Pavan, model GRIM 2000, now available on Kitmondo. This mixer, crafted from durable stainless steel, is specifically designed for the food industry, offering a versatile solution for mixing a wide range of ingredients. With its production capacity ranging from 350 to 1800 kg/h, it is ideally suited for operations of various scales, from small artisan producers to large-scale industrial food manufacturers. Main Features: Manufacturer: PAVAN Model: GRIM 2000 Type: Double axis ribbon mixer Material: Stainless steel General Measurements: Axle length 2000 mm, diameter 70 mm; Lid dimensions 2000x365 mm & 1380x365 mm; Overall dimensions 2600 mm (L) x 1000 mm (W) x 1300 mm (H). Engine Features: Voltage: 220/380 V Current: 20/11.6 A Power: 5.5 HP (4.1 kW) Frequency: 50 Hz Rotation Speed: 1430 rpm Technical Data: The GRIM  ...

faceplate diameter: 2000 mm swing diameter: 2400 mm turning height: 1800 mm x-axis: 2000 mm y-axis: 2000 mm z-axis: 1200 mm ram adjustment: 1200/1500 mm faceplate turning speed range -stepless-: 2,3 - 250 U/min boring spindle drive: 27 kW milling drive motor: 27 kW spindle turning speed - stepless: 0-1200 U/min tool magazin:: 12 fach tool taper: 50 ISO control: Siemens 840 D sl chip conveyor: 2 workpiece weight: 15 t total power requirement: 61/92 kW weight of the machine ca.: 56 t dimensions of the machine ca.: 10 x 10 x 7 m m Machine type: CNC carousel lathe Machining Center - Vertical Rectangular ram head suitable for turning, milling, drilling, drilling and Threading. The machine was overhauled and modernized in 2014 automatic 12-fold tool changer C-axis driven tools • Tappet, hydrostatic bearing completely overhauled • Hyfraukik overhauled • Drives and ball screws renewed •  ...

Ultrasonic cleaner GT85 GT 2000-3P built in 2008. The washing tub is made of 316L stainless steel, the other tubs are made of 304 stainless steel and the supporting structure is made of structural steel. The volume of washed products should not exceed (LxWxH) 2400 x 600 x 600 mm Industrial washer - technical data: - external dimensions (LxWxH): 6400 x 4400 x 2800 mm - usable dimensions: chamber I (washing and phosphatizing): 2800 x 800 x 900 mm - useful dimensions: chamber II (rinsing): 2800 x 800 x 900 mm - usable dimensions: chamber III (drying): 2800 x 800 x 900 mm - power consumption: 63 kW - total weight: 2500 kg Bathtub 1: - preparation type: Ruster P02, Roklin P11 - pH: 2-4 - bath operating temperature: 20-60 degrees C - total bath capacity: 2000 l - maximum product weight: 500 kg - maximum product volume: 250 dm3 Bathtub 2: - type of preparation: tap water  ...

McIntyre Alpack 2000 Automatic Can Sorter The McIntyre Alpack 2000 Automatic Can Sorter provides an inexpensive way of separating large volumes of steel UBCs from high value aluminium cans Efficient, versatile, cost-effective The McIntyre Alpack 2000 Can Sorter can work both independently or be coupled with a JMC Baler to provide a complete sorting and baling system. Alpack 2000 is able to give almost 100% separation of aluminium from steel.

Code 61063 Description Surface grinding machine Make ABA Model FFU 2000/60 Serial No. 208 125 Control Abamatic 3 Year 1986 Tablesize 2510 x 500 mm Grinding surface L x B x H 2000 x 600 x 700 mm Magnetical plate size L x B 2000 x 500 mm Speed table movement 3 – 30 m/min. Max. distance table – centre grinding wheel 900 mm Grinding stone dim. Stone x Wide x Taper Ø 400 x 50 x Ø 127 mm Spindel power 26 kW Spindel speed 1600 - 3000 rpm Motor power 26 kW – 380 Volt Total electr.com. 34 kW Total space L x W x H 7000 x 3500 x 2650 mm Weight 10500 kgs Accessoiries Elec. Magneticplate 2000 x 500 mm Coolant with paperfilter Digital readout Grinding stones, etc. Condition Machine is in good condition

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 2000 (1000 - 5000mm) mm spindle bore: 72 mm turning dia. in gap: 700 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 315 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 3150 kg LZ lathe for industry and training Available in 3 sizes 1000, 1500 and 2000, 3000, 4000 and 50000 mm Excellent quality in terms of accuracy and stability, resulting in that through the stability a quiet running behavior is guaranteed and thus also  ...

turning diameter over bed: 580 mm turning diameter over slide rest: 380 mm turning length: 2000 (1000 - 5000mm) mm spindle bore: 72 mm turning dia. in gap: 780 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 400 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 315 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MK 5 quill stroke: 230 mm total power requirement: 7,5 (11) kW weight of the machine ca.: 3010 kg LZ lathe for industry and training Available in 3 sizes 1000, 1500 and 2000, 3000, 4000 and 50000 mm Excellent quality in terms of accuracy and stability, resulting in that through the stability a quiet running behavior is guaranteed and thus also  ...

HENKE UNI 2000-6000 Built in 1995 Format: 400x400 2-speed 400x600 2-speed 1. Distributor for attachment 2. Doser 3. Settling device 4. Chain conveyor 5. Roller conveyor 6. Plate destacker 7. Cleaning device 8. Plate oiler 9. Pawl conveyor 10. Stacking device 11. Plate removal device with rotating device 12. Control for UNI 2000 13. Belt conveyor with lifting 14. Belt conveyor 15. Plate Displays 16. Carrier chain conveyor 17. Push-off device with roller table 18. Autom. Control for packaging 19. Fader Puller HENKE UNI 2000-6000 Year of production: 1995 Sizes: 400x400 2x 400x600 2x 1. First layer distributor 2. Dozer 3. Take-off device 4. Chain conveyer 5. Roll conveyer 6. Destacking device 7. Cleaning device 8. Oiling device 9. Slap converter 10. Stacking device with rotating device 11. Arm with rotating device 12. Control for UNI 2000 1 ...

GeneralCNC Turning Centre; Control: Control M730UM with CELOS CharacteristicsMax machining diameter920 mmWeight approx.19900 KgRapid feed X / Z20/24 m/minInput precision of C-axis on Mainspindle0,001 degreeMovements X / Z485/2150 mmNumber of tool stations12 Speed max.1600 rpmBar diameter max.116 mmSwing- Ø, max.733 mmMax. Turning Length2000 mmDrive power main spindle45/37 kWCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p(Left Spindle) Hollow Cylinder set for KITAGAWA 24in. Hollow Chuck B-24A1521D (without chuck body) (SK-OP)(Left Spindle) Hollow Cylinder Set for 24-inch) Chuck B-24A1521D (Bar work capacity dia. 117 mm (4.61 inch)) Hollow cylinder and draw bar are  ...

Inv. Num. : 7174 Type: DECO-2000/10 Producer: Tornos Created: 2001 Parameters: Control system: FANUC PNC DECO Max. rod diameter: 10 mm Maximum bar length: 2000 mm Maximum turning length: 180 mm Maximum turning diameter over bed: 200 mm Maximum spindle speed: 12000 1/min Length: 2000 mm Width: 1010 mm Height: 1950 mm Weight: 1500 kg Equipment: Robobar SSF 226 Bar Feeder (2000)

Used case sealing machine APE year 2006 Introduction of the Used case sealing machine APE year 2006 In the bottling industry efficiency is paramount APE Impianti presents a reliable and durable technical solution with its used case sealing machine model CH 2000 HM manufactured in 2006 This article provides a detailed overview of the features and benefits of this essential machine for industrial bottling operations Technical Features Firstly the APE CH 2000 HM case sealing machine is designed to deliver optimal performance in the most demanding production lines With a speed of 2000 boxes per hour this machine ensures consistent and rapid production crucial for meeting market demands Hot Melt Sealing Technology Moreover one of the distinctive features of this machine is its hot melt sealing technology This method ensures a secure and durable seal of the cartons keeping the products inside  ...

Bed feeding machine - Universal AUERBACH FBE 2000 Bearing No. 1105-01972 Category Bed frit machine - Universal Make Auerbach Type 2000 FBE Built in 1996 Condition Used machine Control CNC Heidenhain TNC 415 Storage location FRANCE Country of origin Germany Delivery time by appointment Freight base from stock Technical details x-way 2000 mm y-way 900 mm z-way 900 mm Table size 2100 x 800 mm Tool holder SK 50 Spindle speed: 30 - 3500 rpm Control Heidenhain TNC 415 Spindle drive 29/22 kW Feed speed 1 - 6000 mm/min Rapid speed 15 m/min Total power requirement 42 kVA Machine weight approx. 12.5 t Room requirement approx. 7.7 x 5.5 x 3.0 m Description 3-axis bed-feeding machine With MANUELER two-axle universal head , - vertical level 360 x 1 degree - 45" level 360 x 1 degree

Steam boiler UL-S 2000 Loos International Steam boiler can be used: Industrial and service establishments in the food, beverages, textile, building materials, chemicals, ceramics, and paper sectors, ... with heat and steam demand, for processing, production, and heating. Type: UL-S 2000 Boiler serial number: 103234 Safety valves: Capacity: 2000 kg/h Pressure: 10 bar Technical data: 400V, 5,5kW Boiler Equipment with safety function: • Safety valve – 1 • Safety pressure limiter – 1 • Water level limiter – 1 Piping parts: • Manostat tube – 1 Further equipment: • Steam extraction valve – 1 • Feed water shut-off valve – 1 • Feed water check valve – 1 • Water level probe for feed water control – 1 • Shut-off valve – 1 • Blow-down valve – 1 • Desalting control valve – 1 • Desalting shut-off valve – 1 • Conductivity measu ...

The CD50 series of our high-pressure machines covers a pressure of 230 to 2000 bar and a volume flow of 7 to 74 l/min. The pump is powered by a water-cooled 4-cylinder Toyota diesel engine. The fully enclosed frame is made of hot-dip galvanized steel to ensure a long service life and corrosion resistance. The frame is primed and then painted. The machine only requires a footprint of 1550 x 920 mm. Under the frame 4 rubber feet are mounted. In addition, the machine has forklift pockets and lifting eyelets attached to all four corners. For the protection and storage of, for example, high-pressure hoses, a galvanized roof plate provides. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CD50-230 230 bar 74 Lpm CD50-400 400 bar 40 Lpm CD50-500 500 bar 33 Lpm CD50-700 700 bar 25 Lpm CD50-1000 100 ...

LXSHOW LXW 2000 W FIBER laser cleaner manufactured by Chinese manufacturer LXSHOW Jinan Lingxiu Laser Equipment Co., Ltd. in 2022, is a widely used industrial device designed to remove e.g. rust, paint, oil and oxide layers from the surface of workpieces. The use of the laser cleaner guarantees the removal of contaminants without any damage to the surface and achieves exceptional cleanliness, impossible to achieve with conventional workpiece cleaning. Laser cleaning is performed without the use of chemicals or cleaning solutions, making the fiber laser cleaner environmentally friendly. At the end of the process, the waste takes the form of a solid powder, easy to store and recycle. The LXSHOW fiber laser offered together with the reliable 2 kW RAYCUS RFL-C2000 generator ensures long-lasting, uninterrupted and highly efficient performance at a low cost of operation. The LXSHOW LXW20 ...

Machining center bridge-type 5-axis FAMU Active Five 2000 Make: FAMU Model: Active Five 2000 YEAR 2008 X-AXIS TRAVEL 2000 mm Y-AXIS TRAVEL 1800 mm Z-AXIS TRAVEL 850 mm RAPID FEEDS X-Y-Z 30 m/min SPINDLE 0 – 22000 rpm; 30 kW; HSK A63 TABLE SIZE 2100 x 1000 mm MAX ADMITTED LOAD 3000 Kg HIGH PRESSURE COOLANT 50 Bar TOOL MAGAZINE CHAIN-TYPE ; 30 POS CONTROL UNIT HEIDENHAIN iTNC 530 WEIGHT 19500 Kg OVERALL DIMENSIONS 5850 x 3880 x 3860 mm ACCESSORIES PORTABLE HANDWHEEL ; SWARF CONVEYOR ; LINEAR SCALES NOTE TOTAL RETROFIT ON CONTINUOUS POSITIONING A and B-AXIS HEAD AND ON ELECTRO SPINDLE (YEAR 2021)

Key data: 2000

warehouse no.: 503128 manufacturer: ARBURG type: Allrounder 520 C 2000-800 controller: Selogica year of construction: 2005 clamping force: 2000 kN distance between tie bars h x v: 520 x 520 mm size of mould plates h x v: 728 x 728 mm min. mould height: 250 mm max. open daylight: 900 mm opening stroke: 650 mm screw diameter: 50 mm swept volume: 392 ccm injection pressure: 2000 bar equipment included: screen text german core pulling hydraulically 1x core pulling pneum. 1x air valve 1x machine incl. water flow regulator machine without material hopper Anti vibration mounts interface for handling mould heating 12x measures of machine lxbxh: 5.45m x 1.8m x 2.1m total weight: 7150KG

You will find no hidden costs with us We always present the final amount on sales quotes if the contract is signed within the quote valid period. We always evaluate shipping costs from our warehouse in Poland. Laser welder LWH-2000-N The kit includes: - laser welder with cooling system - welding gun with adjustable focal length and set of accessories - fiber laser source MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz Welding and cutting Otinus laser welders are supplied with a set of nozzles and protective lenses designed for metal welding and cutting. Therefore, the device is versatile, and helps to save money by eliminating the possible need to purchase, for example, a manual pla ...

turning diameter: 1040/1900 mm turning length: 2000/3000/1250 mm swing diameter over bed slide: 740 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Make: EST-Ticino type: 520/2000 distance between centers min/max: 2000/3000 mm center height 520 mm Max. turning diameter over bed 1040 mm Max. turning diameter over support 710 mm max. turning diameter/length 1900 x 1250 mm spindle passage 135 mm with 3 jaw chuck with 4-jaw chuck quick change holder in very good and immediately ready condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 2000 mm plate depth: 1000 mm plate height: 310 mm weight: 1650 kg dimensions of the machine ca.: 2000 x 1000 x 300 mm Clamping plates - T-slot plates - panel array 2000 x 1000 x 310 mm If you have not found the size you require, you can also send us an e-mail send us an e-mail with the completed PDF form. With this we can can produce an individually manufactured panel for you. Number of grooves: 3 edge distance: 185mm groove spacing: 270mm Groove width: 28mm Casting quality HT250 Flatness less than 0,12 mm Surface machined according to DIN 876 Edge distance: 185mm Groove spacing: 270mm Groove width: 28mm Casting quality HT250 Flatness less than 0,12 mm Surface machined according to DIN 876/III The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 2000 mm plate depth: 1500 mm plate height: 310 mm weight: 2385 kg dimensions of the machine ca.: 2000 x 1500 x 300 m Clamping plates - T-slot plates - panel array 2000 x 1500 x 310 mm If you have not found the size you are looking for, you can also send us an e-mail with the completed PDF form. With this we can to have an individually manufactured panel made for you. Number of grooves: 5 edge distance: 135mm groove spacing: 270mm Groove width: 28mm Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/III The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ESAB EAGLE 2000 plasma cutting machine was built in 2009 in Germany. The machine is designed for machining stainless steel, structural steel, low-alloy steel and aluminium with a maximum thickness of 30 mm and has a very stable and vibration-free welded construction. Excellent cutting precision with simultaneous low operating costs is ensured by the ESAB Precision Plasmarc 201 plasma source with a power of 200 A, which generates a narrow plasma beam with high energy density per small area of material. The plasma cutting machine portal was fixed by two dynamic servo drives operating with low backlash on the machined profile rails (X axis). The dynamic servo drive in the transverse carriage drives the spur gear, which then meshes with the toothed bar of the machine portal, causing transverse movement (Y axis). The plasma cutting machine is equipped with an ESAB CNC control with the late ...

Dematic Conveyor Roller Conveyor 3000/2500/2000/1500/1000-500-440 RA1947 Gravity conveyors - roller conveyors without drive Nominal/outer width (NB): 500 mm Available conveyor lengths (FL): 3000 mm, 2500 mm, 2000 mm, 1500 mm, 1000 mm Further information Manufacturer: Siemens Dematic Type: Roller conveyor Year of manufacture: unknown Condition: good (used) roller width (RB): 440 mm roller pitch: 62,5-125 mm variable drive types: none or head and center drive weight of conveyed material: up to 30 kg The following accessories are optionally available e.g.: Motors with and without frequency inverter of the brand SEW Eurodrive / Movimot. supports side guides Features: condition: very good (used) Conveying length in mm: 1000, 1500, 2000, 2500, 3000 Nominal / outside width in mm: 500 Roll width in mm: 440 Roll division in mm: 62,5, 130 Driven: möglich scope of delivery: without supports and s ...

Dematic Conveyor Roller Conveyor 3000/2500/2000/1500/1000-600-540 RA1938 Gravity conveyors - roller conveyors without drive Nominal/outer width (NB): 600 mm Available conveyor lengths (FL): 3000 mm, 2500 mm, 2000 mm, 1500 mm, 1000 mm Further information Manufacturer: Siemens Dematic Type: Roller conveyor Year of manufacture: unknown Condition: good (used) roller width (RB): 540 mm roller pitch: 62,5-125 mm variable drive types: none or head and center drive weight of conveyed material: up to 30 kg The following accessories are optionally available e.g.: Motors with and without frequency inverter of the brand SEW Eurodrive / Movimot. supports side guides Features: condition: new Conveying length in mm: 1000, 1500, 2000, 2500, 3000 Nominal / outside width in mm: 600 Roll width in mm: 540 Roll division in mm: 62,5, 130 Driven: möglich scope of delivery: without supports and side guides F ...

Manufacturer: SR, Type: TM 2000, Year: ca.2000, Lifting power kg: 1000, Length mm: 1500, Width mm: 540 Gabel aussen, Lifting hight approx. mm: ca.150, FREE TEXT: Preis 120 Euro.zzgl.Mwst, Year :ca.2000

Scissor lift table, scissor lift table, scissor lift platform, scissor lift platform, single scissor lift table -Manufacturer: Lödige, scissor lift table -Load capacity: 1000 kg -Platform: 3000 x 2000 mm -Dimension retracted: height 390 mm -Dimension extended: height 2000 mm -Hydraulic unit: Bauknecht 3 kW / 150 bar -Transport dimensions: 3000/2000/H390 mm -Own weight: 2100 kg

Inv. Num. : 7175 Type: DECO-2000/13 Producer: Tornos Created: 2001 Parameters: Control system: FANUC PNC DECO Max. rod diameter: 13 mm Number of synchronized axes: 10 pieces Maximum spindle speed: 10,000 1/min Length: 2000 mm Width: 1260 mm Height: 1950 mm Weight: 3000 kg Equipment: Robobar SSF 226 Bar Feeder (2000)

turning diameter over bed: 460 mm turning diameter over slide rest: 270 mm centre distance: 2000 mm turning length: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 3-jaw chuck diameter 250mm 3-axes digital read-out Parat tool holder device tail stock coolant device Technische Daten / technical details: Spitzenweite / center to center 2000 mm Dreh-Ø über Bett / turning Ø over bed 460 mm Dreh-Ø über Schlitten / turning Ø over sledge 270 mm Umlaufdurchmesser in der Brücke / rotary diameter in the gap 730 mm Drehzahlbereich / spindle speed 20-2000 UpM /rpm Spindelbohrung / spindle hole 76 mm Antriebsleistung / drive capacity 11 kW Gewicht der Maschine ca. / weight 3300 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.  ...

Bobst 2000 + 2 Color Göpfert Impression Göpfert - Impression 16/20 Type: Impression 16/20 Prefeeder Year : 2019 2 Colo Anilox System , Ceramic Roller Vacuum transport Dust Extraction Bobst 2000 - Overhould in 2019 - Siemens S7 Type: SPO 2000 Year: 1988 Centerline Quicklock system Max.Size: 1270 x 2030mm Min.Size: 520 x 600mm Max.Speed: 5000 Sh/h Max. Cutting Force: 550t

Lippert roller conveyor Roller conveyor Alignment conveyor 2000-700-600 RA2073 Make: Transnorm Roller width (RB): 600 mm Nominal width/outer width (NB): 700 mm Length: 2000 mm Roller diameter: 50 mm Distance between rollers: 76 mm Drive motor: SEW geared motor Electrical data: 380 V, 0.37 kW Frame height: 105 mm including motor: 400 mm Conveyor speed: please contact us Optionally available: Supports Side guides Frequency converter for stepless speed control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: nominal voltage: 380-480 V condition: good (used) Conveying length in mm: 2000 Nominal / outside width in mm: 700 Roll width in mm: 600 Roll division in mm: 76 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides For individual, expert advice, ...

Can Filling Line for Beer and CSD, Automatic MITCAB 2000 cph – 2023 Complete can filling line with depalletizer equipped with 300ml can rinser, fully automatic filling block with an overpressure filler with 12 filling heads, one head can seamer and CO2 air pre-evacuation system built in filling nozzles, wraparound roll feed labelling machine for self-adhesive film labels with separate date coder, collecting table for manual packing of cans and intermediate can conveyors. The line is set up for 300ml standard and sleek cans and 500ml standard cans and designed for beer and carbonated soft drinks. Equipment was manufactured in 2023 and only tested, no commercial operation made. Technical Characteristics Producer MIDCAB Sweden Can sizes 330ml slim, 330ml standard, 500ml standard Capacity upto 1500 - 2000 cph Manufacturing year 2023 Operating hours Only tested, no commerci ...

core drilling diameter max.: 32 mm bore depth: 1500 mm swing diameter: mm Control: Heidenhain TNC 430 total power requirement: 40 kW weight of the machine ca.: 15,5 t dimensions of the machine ca.: m CNC deep drilling and milling machine BUCK TBFZ 2000 CNC suitable for deep hole drilling and milling of cubic workpieces. Technical data Travel paths: X - axis (longitudinal) 2000 mm Y - axis (vertical) 1000 mm Z - axis (drilling axis/drilling depth) 1500 mm W axis (boom) 500 mm B-axis (rotary table) 0-360° Drilling/milling unit: Tool holder SK 50 according to DIN 69871 Speed 0-6000 rpm Drive power 17.25 kW at 60% ED NC rotary table (B axis): Clamping table 1800 x 1500 mm Table load max. 20000 kg Feed speed: X-axis (machine column) 0-15000 mm/min Y-axis (vertical slide) 0-15000 mm/min Z axis (drilling slide) 0-15000 mm/min Work performance in material 1.2312: Drilling diameter with ELHB 4 - ...

Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-2000-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work fr ...

turning diameter:620 mm turning length:2000 mm control:FAGOR 8055 max. swing over slide:410 mm bed width:350 mm spindle drive:17 kW spindle taper:A2-8 ASA spindle speeds:0-2500 1/min. spindle bore:105 mm tailstock quill diameter:95 mm tailstock quill stroke:220 mm taper of tailstock quill:5 MK max. length of work piece:2000 mm rapid traverse x/z:15/12,5 m/min weight of the machine ca.:3,5 t dimensions of the machine ca.:3940 x1350x1810 mm automatic tool changer:PRAGATI; aut. Revolver mit angetr. Stationen DTT80 12 POS. fach tools:1 Satz servo spindle motor:von FAGOR sowie Achsmotoren von FAGOR fixed steady rests:1 Stk. live center:1 Stk. follower rest:1 Stk. 3 jaw chuck Ø:315 (hydr.) mm New CNC lathe KRAFT KT 285/2000 with Fagor 8055. Made in Europe, Picture similiar. For more information please see the attached documents

turning diameter:570 mm turning length:2000 mm control:FANUC O i TF turning diameter over bed slide:490 max. swing over slide:360 mm bed width:350 mm spindle taper:A2-8 spindle speeds:0-2500 1/min. spindle bore:80 mm tailstock quill diameter:95 mm tailstock quill stroke:220 mm taper of tailstock quill:5 MK max. length of work piece:2000 mm chuck size:250 mm rapid traverse x/z:15/12 m/min power requirement:11 kW weight of the machine ca.:2970 kg dimensions of the machine ca.:3325x1350x1810 mm automatic tool changer:12-fach, VDI 30 3-jaw hydraulic chuck:250 mm tools:1 Satz New CNC lathe KRAFT KT 285/2000 with Fagor 8055. Made in Europe, Picture similiar. For more information please see the attached documents

turning diameter:2000 mm turning length:1500/2000/3000/4000/5000/6000/8000 mm control:Siemens 828D turning diameter over slide:1640 mm bed width:820 mm spindle nose:A2-11/A2-15/A2-20/A2-20 spindle bore:155/250/305/380 mm spindle turning speed - stepless:4-600/4-400/4-400/4-300 U/min x-travel:750 mm z-travel:2000/3000/4000/5000/6000/8000 mm rapid power traverse in X-and Z direction:6 m/min servo motor X-axis:3 kw Fanuc / 3,3 kw Siemens servo motor Z-axis:4 kw Fanuc / 4,3 kw Siemens tailstock quill stroke:300 mm tailstock quill diameter:200 (295 opt.) mm taper in tailstock:6 MK tool turret:8/10/12 fach tool holder -shaft diameter:32 (40 opt.) mm main drive motor:30 (37 opt.) kW weight of the machine ca.:9/10/11/12/13 t positioning accuracy:+0.01 / 300 mm repeating accuracy:+0,005 mm machine length:5000/6000/7000/8000/9000/10000 mm machine width/height:2500 x 2400 mm max. workpiece weight ...