springs used for sale

1. Disk Spring 2093F Ø80 x Ø36 x 4 mm - 5,400 pcs 2. Clamping Tool Large - 6 pcs For OD: 28 inch (711.2 mm) to 64 inch (1625.6 mm) Includes: Clamping Adapter Large; Cylinder Revolving Connector; Pants Rotating Coupling (3 m); Pneumatic Foot Pump XA12G

BTS 200 spring coiling machine + AB1 decoiler cap wire diameter: 0,4 gt; 1,5 mm winding diameter: max 40 mm 18 gt; 445 pieces/min power: 1,5 kW length: 990 mm width: 1000 mm height: 1600 mm weight: 610 kg nbsp; extension springs - compression springs - conical springs - biconicalsprings with winding on the right or on the left

BX 400 spring coiling machine + AB2 decoiler cap wire diameter: 0,8 gt; 4 mm winding diameter: max 70 mm speed: 180 m/min (max 90 pieces/min) power: 6 kW length: 1400 mm width: 1350 mm height: 1900 mm weight: 2200 kg nbsp; extension springs - compression springs - conical springs - biconicalsprings with winding on the right or on the left

SMERAL LZK 2500 Hot Forging press Fully refurbished in 2024 Capacity: 2500 Ton Speed: 65 SPM, continuous mode Ram/Slide Stroke: 320.00mm Ram/Slide Adjustment: 10.00mm Shut Height (Ram/Slide Down, Adjustment Up): 905.00mm Stroke of Upper Knockout: 50.00mm Stroke of Lower Knockout: 70.00mm Ram/Slide Width: 1320.00 mm Ram/Slide Height: 1100.00 mm Bed Width: 1340.00 mm Bed Depth: 1400.00 mm Power: 130kW Machine Length: 4055.00 mm Machine Width: 4000.00 mm Machine Height: 6710.00 mm Weight: 140000 kg Condition: like new refurbishing report: 1. Mechanical part • Complete disassembly of the press. • Measurement and troubleshooting of all parts. • The main parts of the press are tested (without destruction) in order to identify any defects. Frame: The frame was inspected and non-destructive testing of the most loaded areas was carried out. Damage to the table pl ...

for torsion springs wire diameter 1,0-3,5 mm spring diameter max. 50 mm leg length 115x130 mm legth of springs max. 150 mm output - pieces/min 65

spindle speed: 16,000 rpm(steptec switzerland) spindle taper: hsk-a63 x axis movement mm : 1020 y axis movement mm : 560 z axis movement mm : 600 x-y axis fast progress(m/min): 40 z axis fast feed (m/min): 40 table dimension (mm): 1000x560 tool magazine: 40 pieces (6 missing ports) controller: hei̇denhai̇n tnc 620 slide structure: lineal slide (glass table reader) maximum table load kg : 1350 it has the feature of watering into the tool, it has the feature of air into the tool, there is a renishaw probe machine spindle working time is 23000 hours. there has not been any release to date. there was no major faults. axis bearings have changed at certain times. the springs inside the spindle have changed. leaf springs have changed. it is original and zero precision like the day it was purchased with spindle. the machine was not into rough chip, precision and finish works ...

Type: VK 1056, Y.O.M. 2006. Single-deck rod sizer with integrated feed channel, rod carrier and rod rake made of stainless steel, screen frame rubberized 60 shore, 2 unbalance motors 2.8 kW / 960 UPM, open screen box on compression springs, brake control, steel base. Current cutting at 8 mm; machine was only in use for 12 months, therefore in very good condition.

Stainless steel vibrating sieve for wet sieving, 1 deck with 915 mm, 2 outlets, with unbalance drive (approx. 1 kW) and springs. 2 pcs. available.

: Plant used separation / separation system Manufacturer: Schauenburg Type: MAB 200 Year of construction: 1991 1: mixture task box DN 150 Usage: for the slurry task on the average grading railway of the Schwingentwässeres Execution mixture task box: welded and bolted steel sheet construction with a 10 mm strong LINATEX lining and a removable, with 20 mm LINATEX baffle wall. Inlet port: DN 150 flange, born after DN 10 2: Schwingentwässerer type 1240 Machine number: 1127 Dimensions: Width 1200, length 4000 mm Execution: The sieve bin and the actuator yoke, welded and bolted steel construction with one-piece side, rear window, dropping snout rubberized. Drive unit: 1 double unbalance Exciter type S3, 1 drive motor 7,5 kW, 1000 rpm, design B3 3: screen surfaces Classification: single-track plan screening surface width 385 mm, stoma lengthwise in the direction of request, gap width  ...

We have more than 1000 used Alfa Laval SRC valves in different sizes in stock. Also actuators with heavy duty springs, two-step actuators, components like RC or BC housings (reverse closing, brewery CIP) and many more special items. We also sell valve parts, please ask. The valves can be customized with new seals of your choice and delivered ready to install. Valve tops like Thinktop , basic top ,Sattop , LKT-S , LKT-N and proximity switches also available, both new and used. Editec AB

FOR SALE... NOHAB DIESEL F30 NEW & GENIUE SPARE PARTS AT TURKEY. HAVE A GOOD DAY SIR; WE VE NEW UNUSED SPARE PARTS OF NOHAB DIESEL F30 ENGINE AT OUR STOCK WE'VE MORE THAN 198 NEW ITEMS. PLS FIND SOME SELECTED ITEMS AS BELOW WE VE ALSO RECON SPARE PARTS. RECON PISTON 4 GROOVES (4 PCS piston SCHMIDT & 1 PCS MAHLE) 5 PCS RECON CYLINDER LINERS (WITH CLASS STAMPED) 5 PCS RECON CYLINDER HEADS FULL (WITH VALVES & SPRINGS) LLYODS STAMPED 2 PCS RECON FUEL INJECTION PUMPS BOSCH 12 PCS RECON OIL PUMP 1 PCS OVERHAULED COMPLATE FUEL INJECTORS 10 PCS RECON FUEL FEED PUMP 1 PCS . IF YOU HAVE ANY QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. PLS FIND SOME NEW SPATE PARTS ITEMS LIST PISTON 4 GROOVES PISTON SCHMIDT 9198100965 1 LINER DNV TESTED ...

FOR SALE NOHAB POLAR GENUIENE F 312V PARTS DEAR SIR ; WE'VE OVER HAULED NOHAB POLAR F312 V CYLINDER HEADS AND STANDARD GROOVES USED MONO BLOCK PISTONS AT OUR STOCK. PLS FIND DETAILS AT BELOW. -OVERHAULED CYLINDER HEADS WITH VALVES AND SPRINGS TOTAL 12 PCS PART NO. 120128 / W 00027762 S3 TYPE HEAD NK CLASS STAMPED TESTED WITH 7 BARS NO. CRACK / WELD FREE / VALVES SEATS IN NOMINAL SIZE -- MONO BLOCK 4 GROOVES PISTONS TOTAL 9 PCS MAKER MAHLE 2008 MODEL PART NO. 9111323501 / 421401 TYPE G5 GROOVES ARE STANDARD SIZE 4-4-4 - 8 MM IF YOU'VE ANY FURTHER QUESTIONS. PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Best Regards ; Aliaga Marine Services E mail: info@aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 abc.aliagamarine.com TURKEY

Vibrating sieve for wet screening, 1 deck with 915 mm (36) Ø, 2 outlets, with imbalance drive (ca. 1 kW) and springs. 2 pcs availabe.

cylinder head completed with valves+springs recondioned at stock now! MIW GmbH Nord-West-Ring 8 D-27404 Zeven-Germany phone: 0049(0) 4281950583 fax : 0049(0) 04281950585 mail: info@miw-zeven

Of used filter cake-cerium-smaller impulse: Springs a filter cake-cerium-smaller exists of two mutually running knife waves they chop up the filter cake.

hydraulic internal clearing machine in good operational condition Clearing stroke:1.500mm Tension: 16,000 KG â?¢ the drawing head shot in the drawbridge:85mm Through-hole in the clamping table: 120mm Workpiece diameter: max. 750mm (due to the machine body of the tool feeder) Cutting speed: hydraulically infinitely adjustable from 1 m/min to 6m/min Return speed: hydraulically infinitely adjustable from 5m/min to 30m/min Dimensions of the machine: (bx t x h) approx. 6,600 mm x 800 mm x 1,500mm (without working area) Power supply / connection power: 380Volt 50 HZ /8.0 KW Accessories / Optional equipment: â?¢ the machine has an electrical control for clearing lifting movement â?¢ the machine has an integrated cooling cutting system â?¢ the machine has a flanged machine bed with a manual tool feeder The machine is ideal for the produ ...

We offer new cylinder heads with valves+springs fully assembled from stock immediately available to: MIW Ltd. Engine Repair Plant North-West Ring 8 D-27404 Zeven / Germany Tel:0049(0) 4281-950583 Fax:0049(0) 4281-950585 Email: info@miw-zeven.de abc.miw-zeven.de

Cylinder head, Vasa 32 Low Nox Including valves, springs and rotocaps Part no: 120055

used mechanical vertical internal clearing machine in very good condition. Pulling force at 3m/min: 3000 KG Clearance speed: 3m/min Return speed: 3m/min maximum stroke: 800mm Ropcmo87 maximum tool length: 1000mm Table area: 350mm x 220mm Table break-in: 90mm Workpiece diameter: any Dimensions (h x w x t): 1260 x 500 x 720mm Engine power: 1.1 / 1.5KW Power supply: 380 volts 50 HZ Accessories / Optional equipment: - integrated coolant / cutting agent system - Machine documentation Comment: The double spindle drive ensures a quiet and central pulling point as well as a constant clearance speed. The machine is mainly designed for the production of spring springs up to 20mm. The machine has been partially overhauled, all bearings, shaft seals and seals of the trapezoidal spindles and gearbox have been renewed. The drawing head is re-ground and adjusted, the machine body is  ...

The milling center DUGARD EAGLE 660 was produced in 2005. The vertical machining center has a reconditioned spindle with a tool haul change - a rod, springs and a gripper. Technical parameters of the CNC milling machine: - CNC controller: SIEMENS SINUMERIK 810D ShopMill - workpiece probe - tool probe Worktable : - table dimensions: 810 x 510 mm - maximum table load: 500 kg - T-slot, quantity: 5 mm - T-slot, size: 18 mm - T-slot, spacing: 100 mm Processing field: - X axis travels: 660 mm - Y axis travels: 530 mm - Z axis travel: 510 mm - distance of the spindle tip to the axis of the table: 150 ~ 660 mm - distance of the spindle axis to the column: 585 mm Spindle: - spindle taper: ISO 40 - constant spindle power: 11 kW - spindle power 30 min. : 15 kW - spindle speed range: 80 ~ 8000 rpm. Rapid feeds: - X axis travel: 30 m / min. - Y axis travel: 30 m / mi ...

Mogensen twin-sizer with 4 decks (each deck has 2 screen gauzes with a sieving area of 1,32 m x 0,98 m per gauze) and 4 outlets. Incl. 2 imbalance drives (4,0 kW / 380 V each), meshes, covers and supporting springs. Since sieve has a central division wall two separate material streams can be fed (after corresponding adaptation of the outlet hoppers).

Cylinder head, complete for Wartsila L32 / V32 engine The cylinder head has only done a few running hours. Part no: 120080 Including valves / springs / rotocaps / rocker arm Standard size exhaust valve seats.

Mogensen double-sizer with 4 decks with 2 screen coverings (screen area per covering: 1.32 m x 0.98 m) and 4 outlets each. With 2 unbalance scoundories (each 4.0 kW / 380 V), sieve coverings, lids and support springs. Two different grains can also be given up by means of a middle bar, provided that the outlet housings are adapted appropriately.

Screen deck: approx. 1,000 x 3,000 mm, with springs, spring seats and pipework for water spraying

Complete Printshop from one place in germany: Manufacturer: Heidelberg Model: GTO Year of construction: 87 Size: 32 x 46 cm Totalizator status: approx. 29,450,894 Availability: in July 2021 Manual double sheet control AntiqueStatic Simco Powder device WEKO Chromed plate cylinder 2 display trolleys Sticks of paper Rubber blankets 2 clamping bars Page marks + upright + left for small formats Support plate Bacher Controll- 1 Bacher register punch with assembly and fitting strips Plus version complete numbering and imprinting device incl. 3 numbering machines + accessories Perforation device: 2 perforation and creasing insert blocks Bracket with three leaf springs Dampening system Varn Kompac III GT 46 Year: December 9, 1994 POLAR CUTTING MACHINE High-performance high-speed cutter Manufacturer: PolarMohr Model: 76 EM Year: 1993 Availabile: end of July 20 ...

Set of 2 unused Duechting type MC 50-315 D pumps, manufactured in 2014. Düchting Pumpen Maschinenfabrik GmbH & Co. KG Q 20 m³/h H 21.8 m N 1140 1/min P 4.1 kW T 70 °C Rho 1400 kg/m³ TYPE MC Horizontal single-stage centrifugal pump in back pullout design. • Pumping of abrasive and corrosive liquids • All components which are in contact with the liquid are made of SICcast • Suction flange: Axial • Discharge flange: Top (Vertical) • Closed impeller with three-dimensionally curved vanes • Impeller is key driven; reverse rotation (e.g. back-flushing) is possible • Re-adjustable inclined gap between impeller and volute casing to optimize the efficiency and differential pressure after longer operation • Single acting, metal free mechanical seal DÜTEC with springs located outside of the liquid (other seal types available) • Oil-lubricated antifriction  ...

SUB: FOR SALE NEW UNUSED WARTSILA L 20 CYLINDER HEADS YOB 2013 HAVE A GDY SIR; WE VE 10 PCS NEW UNUSED ORIGINAL WARTSILA L 20 CYLINDER HEADS AT OUR STOCK. , HEADS HAS NIMONIC VALVES SPRINGS ROTO CAPS INDICATOR COOK. HEADS HAS ' W ' 0215 CAST IRON STAMP ON IT . HEADS SUPLIED VIA EX OWNER FROM WARTSILA ON 2013 CYLINDER HEADS READY TO TRANSPORT. IF YOU'VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With child of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

FOR SALE: NOHAB POLAR F20 S TYPE CYLINDER HEAD AT STOCK DEAR SIR; WE VE 11 PCS NOHAB POLAR F20 S TYPE OVERHAULED CYLINDER HEADS AT OUR STOCK HEADS CHECKED WITH 10 BAR WATER PRESSURE TEST. CRACK FREE CORONATION SEATS ARE IN NOMINAL SIZE. WE OFFER HEADS WITH FULL VALVES & SPRINGS ROTO CAPS WITH AIR STARTER IF YOU INTEREST PLS LET ME KNOW. Capt. Ayhan Ugurluba With child of regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 aliagamarine.com TURKEY

Vertical axis basket centrifuge with discharge from above with bag mounted on three feet (with straps and compression springs) of second hand. Model FT-12-BG manufactured by COMTEIFA. All parts in contact with the product are made of 316L stainless steel. General characteristics: Maker COMTEIFA Model FT-12-BG Guy Vertical axis basket centrifuge with discharge from above with bag Material Stainless steel 316L Variable speed per frequency converter. Total opening. All parts in contact with the product are made of AISI 316L stainless steel. Mounting on very strongly sized roller bearings. Box of casting bearings. Electric stop brake made by the converter. Stainless steel cap AISI 316L piston movement compensated by spring. Specifications: Discharge Manual above with bag Basket diameter 1,200 mm Basket height 650 mm Maximum permissible load 450 kg Payload 350 d ...

DYNAJET 500th HELI with approx. 4,250 operating hours, price 22.000€ (net) The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. CONSTRUCTION • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Self-supporting and indestructible framework for weight optimization • Crane eyelet for easy transport and handling • Underrun protection for additional safety • Frame in dip painting technology for high corrosion protection and highest surface quality • Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, overall machine safety and noise reduction • Impact-resistant plastic hood for mi ...

Out of stock, we offer spare parts for McIntyre alligator scissors. Main wearing parts such as blades for JMC 150, JMC 200B, JMC 320; JMC 407, JMC 500, JMC 600, JMC 640, JMC 900. In addition you will find control blocks, hoists, foot control, springs, screws for the knife sets, adjusting screws on the knife sets, adjusting screw cutter with brass wear plate, electric box next to other parts always in stock. Inquire. We help in the short term. Also express shipping possible. By phone at 02824/4193

DYNAJET 500th HELI with approx. 800 operating hours, price 38.000€ (net) The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. CONSTRUCTION • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Self-supporting and indestructible framework for weight optimization • Crane eyelet for easy transport and handling • Underrun protection for additional safety • Frame in dip painting technology for high corrosion protection and highest surface quality • Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, overall machine safety and noise reduction • Impact-resistant plastic hood for mini ...

DYNAJET 500th HELI with approx. 1,450 operating hours, price 33.000€ (net) The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. CONSTRUCTION • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Self-supporting and indestructible framework for weight optimization • Crane eyelet for easy transport and handling • Underrun protection for additional safety • Frame in dip painting technology for high corrosion protection and highest surface quality • Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, overall machine safety and noise reduction • Impact-resistant plastic hood for mi ...

General / technical data: used mechanical vertical internal clearing machine in very good condition. Pulling force at 3m/min: 4000 KG Clearance speed: 3m/min Return speed:6m/min maximum stroke: 1000mm maximum tool length: 1200mm Table area: 450mm x 250mm Table break: 90mm Workpiece diameter: any Dimensions ( h x w x t): 1610 x 630 x 855mm Engine power: 2.2 / 3.5KW Power supply:400 volts 50 HZ Accessories / Optional equipment: - integrated coolant/cutting agent system -electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the drawbridge) - Central lubrication system - CE machine marking Comment: The double spindle drive ensures a quiet and central pulling point as well as a constant clearance speed. The machine is mainly designed for the production of spring springs up to 20mm. The machine has a very quiet machine  ...

Screen area: 1250 x 3000 mm Square mesh screen covering with underframes, springs and feathers

Capacity: 600 l Heating: steam, 127 kW, 8 bar Outside dimensions 110 x 130 x 135 cm (HxWxD) Inside dimensions 60 x 109 x 88 cm (HxWxD) Control: MC K Mouting Voltage: 230/400 V , 50 Hz Cover: insulated,with springs and hinges of stainless steel, opening 90° Drainage: piston – type drain cock Equipment: valves for cold and hot water

USED COMTEIFA FT-12 BG CENTRIFUGE REF#: C5613 Used vertical axis basket centrifuge with upper discharge with filtering bag mounted on three feet (with compression straps and springs). Type FT-12-BG manufactured by COMTEIFA. AISI 316 SS wetted parts. General characteristics: Manufactured by COMTEIFA Model FT-12-BG Type Vertical basket top discharge centrifuge Material Stainless steel 316L Variable speed by frequency converter. Total opening All parts in contact with the product are made of AISI 316L stainless steel. Mounting on very strongly sized roller bearings. Bearing house of cast iron. Electric stop brake made by the converter. AISI 316L stainless steel lid with spring-compensated piston movement Technical characteristics: Download Manual above with bag Basket diameter 1,200 mm Height basket 650 mm Max. load 450 kg Useful load 350 dm3 Max. rotationa ...

cutting diameter: 330 mm saw band length: 3870 x 34 x 1,1 mm cutting width: 400 mm band speed: 15 - 90 m/min : 400 x 200 mm cutting capacity - round: 330 bei 90° mm : 250 x 170 mm cutting capacity - round: 250 bei 45° mm work height max.: 940 mm cutting capacity - square: 320 bei 90° mm cutting capacity - square: 230 mm total power requirement: 3,0 kW weight of the machine ca.: 665 kg dimensions of the machine ca.: 2660 x 204 x 2060 mm Description: The ARG 330 F. is a robust manual metal band saw with high cutting accuracy for medium to heavy workpieces! Your exceptionally compact design, as well as its massive saw frame made of gray cast iron are ideally suited for use in workshops and production facilities. The The basic equipment of the machine enables the processing of a wide variety of different materials, including stainless and tool steels. With With this machine, miter cuts ar ...

dimensions:: innen 1160 x 580 x 580 mm Air consumption: 400 - 800 l/min. air pressure: 3,4 - 8,0 bar workpiece weight: max. 120 kg total power requirement: 1,2 kW weight: 115 kg range L-W-H: 1225 x 935 x 1640 mm Furnishing: - Very large front flap that opens upwards - Suitable for various blasting materials e.g. quartz, glass ball, plastic ball, etc. - With gas pressure springs for quick and easy loading and unloading - Integrated suction system with exchangeable air filter - Jet gun without a finger trigger The air flow is controlled by a foot pedal - Two fluorescent tubes (230 volts) in a separate housing with protective screen and exchangeable protective film - Light switch with double function: suction and cabin lighting are switched on and off at the same time Regulation of the working pressure via pressure regulator with manometer - Jet head (grain size 0.125 - 0.42 mm can be  ...

DYNAJET 500th HELI ATC RC INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner In addition to its user-friendliness, 500th with up to 500 bar working pressure is characterized in particular by its low weight, compact dimensions and high level of performance and safety. Construction 1-axle chassis with pneumatic tyres for easy manoeuvring on site Self-supporting and indestructible framework for weight optimization Crane eyelet for easy transport and handling Underrun protection for additional safety Frame in dip painting technology for high corrosion protection and highest surface quality Targa concept with separation between unit side and operating side f ...

Binding press, completely made of stainless steel (frame & all rollers) Bandwidth 1450mm, L x W x H: 4450 x 2100 x 2450mm. Processing capacity with apples approx. 4-6 t/h. Year of construction 1994 Other fruits, berries and vegetables are also possible. No compressed air needed! No complex control necessary! Belt tension by means of 2 pcs. 5t. crank winches and 2 steel springs Very little trub in the juice because no shear effect of 2 bands! Rotary brush & 2 rotary high-pressure nozzles for belt cleaning. This press is an improved replica of an (Amos Compact cover press, see Prospeckt from Amos) in contrast to the Amos press, all rollers in our press are completely made of stainless steel and with continuous shaft (not only shaft stumps) as well as in the interior again amplifier discs to significantly increase the stability of the rollers. The rollers lurk on plain bearings t ...

chamfer lenght: 2060 mm plate thickness: (2,0) 1,5 mm distance between columns: 2060 mm bending angle max.: 135 ° stroke of upper beam: 120 mm weight of the machine ca.: 1,25 t dimensions of the machine ca.: 2,9 x 0,56 x 1,25 m Description. Our folding machines are manufactured entirely in steel construction and with segmented (pan box) tools. Using the OCM is extremely easy and convenient for series production. Thanks to (Pan Box) tools, it is very convenient for the entire production to be made in the form of a box in various sizes. The movable lower beam is operated by strong springs and a manual handle. With these types, no adjustment is required for the compression of the blade on the upper jaws. With the OCM series, the upper tools can optionally be manufactured in full length. Features: Welded structural steel interchangeable upper tool with T-slot Easy to use open and press sys ...

chamfer lenght: 1260 mm plate thickness: 1,5 (2,0) mm bending angle max.: 135 ° stroke of upper beam: 40 mm stroke of upper beam: 100 mm power capacity: 0,75 kW weight of the machine ca.: 350 kg dimensions of the machine ca.: 1,63 x 0,92 x 1,2 m Description. Our folding machines are manufactured entirely in steel construction and with segmented (pan box) tools. Using the OCM is extremely easy and convenient for series production. Thanks to (Pan Box) tools, it is very convenient for the entire production to be made in the form of a box in various sizes. The movable lower beam is operated by strong springs and a manual handle. With these types, no adjustment is required for the compression of the blade on the upper jaws. With the OCM series, the upper tools can optionally be manufactured in full length. Features: Welded structural steel interchangeable upper tool with T-slot Easy to use  ...

DYNAJET 350th HELI The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame in dip painting technology for high corrosion protection and highest surface quality - Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, the Overall machine safety and noise reduction - Impact-resistant lockable hoods made of glass fiber reinforc ...

DYNAJET 350th HELI high pressure hot water cleaner. Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame in dip painting technology for high corrosion protection and highest surface quality - Targa concept with separation between the unit side and the operating side for eno ...

DYNAJET 350th HELI INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! For purchase: Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame ...

DYNAJET 500th HELI Blue Performance INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! For purchase: Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. Construction: • 1-axle chassis for easy manoeuvring • Self-supporting and indestructible framework for weight optimization • Central crane eyelet for optimal transport in hard-to-reach places • Frame in dip painting technology for high corrosion protection and hi ...

Industrial freezer down to -40°C TTS 40-944U Fryka Refrigeration Freezer down to -40°C Tyxp TTS 40-944U Manufacturer Fryka Kältetechnik GmbH LED temperature display Electronic control ST100 (membrane keyboard) Alarm equipment Standby switch Current connection 400Volt, 16A Former original price 20.000.-EUR Quote from manufacturer description: "The housing is made entirely of stainless steel sheet. The insulated outer lid is lockable on the handle. In addition to the outer lid with double seal, the interior is closed with PE insertion lids. The lid is fixed to the base housing with folding hinges and is dampened by gas springs when opening and closing. This allows an opening angle of 90°. The insulation between the interior and the housing jacket is made of two-component insulating foam. The evaporator tubes of the chiller are wound around the interior. The inner she ...

DYNAJET 500th HELI ATC RC INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! For purchase: Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner In addition to its user-friendliness, 500th with up to 500 bar working pressure is characterized in particular by its low weight, compact dimensions and high level of performance and safety. Construction 1-axle chassis with pneumatic tyres for easy manoeuvring on site Self-supporting and indestructible framework for weight optimization Crane eyelet for easy transport and handling Underrun protection for additional safety Frame in dip painting technology  ...

Size: 1.600 x 5.500 mm - Decks: 2 - Included Electrical motor and springs - Will be overhauled, sandblasted and painted