spotting used for sale

Pressing force: 40 t table size: 670 x 470 mm plunger surface: 670 x 470 mm clearance between the pillars: 620/470 mm gr. Height: 740 mm Preß speed: 20 mm / s rapid traverse: 50 mm ejector force: 3T Electr. Supply: 380 V, 9.5 kW space: 2200 x 1875 x 3000 mm weight: 2400 kg

Technical details Pressure 110 t Technology Passage width 1200 x 1000 mm Stroke 1200 mm Machine weight approx. 12 t Space requirement approx. 4500 x 4300 x 2700 mm Master cylinder 1 piece Installation height (distance table to plunger plate) 1200 mm Table height 700 mm Table can be extended by 1200 mm Table tiltable by 45 degrees Upper tool folds down by 180 degrees Table rotatable by 180 degrees Table load max. 10 t Travel speed of the table 25 mm/sec Flow speed 195 mm/sec Return speed 130 mm/sec Working speed adjustable from 0 to 10 mm/sec. Table area between the columns 1250 x 1000 mm Engines WEG Accessories Paint structure RAL 7035 (light grey) Additional information Painting cladding, doors, maintenance balcony RAL 1021 (Yellow) Painting accessories RAL 7021 (dark grey) Columns and cylinders are made of tool steel SAE 1045 (identical to German standard C4 ...

Spotting ruler, dressing ruler, test ruler, straightening ruler, straightening bar -Spotting ruler: 60° -Ruler length: 2015 mm -Dimensions: 2275/120/H105 mm -Weight: 90 kg

pressure: 100 t table length: 2000 mm table width: 1580 mm stroke: mm pressing speed: mm/sec voltage: 400 V return capacity: t max. table loading capacity: 10.000 / 20.000 kg total power requirement: 18 kW weight of the machine ca.: 22 t dimensions of the machine ca.: 5,65 x 2,95 x 5,85 m Serial no: 03.246.00 max. Distance between columns (width) 1620 mm max.load upper table no swiveling 10t / swiveling 6t max.load lower table 22t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MILLUTENSIL spotting press BV30E-RG New machine in stock for sale..

Millutensil spotting press BV25/PM - Output force adjustable (with max. pressure): 100 - 800 kgf - Ejector stroke max.: 120 mm - Hydraulic pressure adjustable from 5 - 100 bar - Width: 150 cm - Depth: 150 cm - Height: 200 cm - With operating instructions Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

REIS TUS 115 OK 100 Die Spotting Press pressure 100 t table surface area 890 x 1280 mm ram surface 1000 x 1200 mm distance between columns 1250 mm stroke 1035 mm distance table/ram, max. stroke up, adjustment up 1035 mm side window 700 mm table height over floor 630 mm max. tool weight 7 t max. capacity of swivelling ram plate 3,5 t oil volume 180 l power capacity 9,0 kW weight 11 t Dimensions (WxDxH): 2,1 x 3,8 x 3,9 m swiveling ram movable table table - tiltable ram interlocking hydraulic ejector in table

length:600 mm width:500 mm weight of the machine ca.:0,05 t dimensions of the machine ca.:1,5 x 1 x 0,8 m Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2024, Josef Weber. All rights reserved.

pressure: 150 t quantity of oil: 480 l tracking travel: 30 mm safety distance: 180 mm dimensions: 1440x1690x2800 mm total power requirement: 18,5 kW weight of the machine ca.: 4200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t table length: 1250 mm table width: 900 mm table travel: 1200 mm dayligth: 700 mm upper clamping surface:: 1000x1200 total power requirement: KVA weight of the machine ca.: 12 t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t stroke: 250 mm total power requirement: 6 kW weight of the machine ca.: 3 t distance between columns: 600/350mm mm table surface area: 860x620 mm ram surface: 860x620 mm table height: 900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t table length: 2500 mm table width: 1800 mm table travel: 2700 mm dayligth: 2250 mm upper clamping surface:: 1800x2500 column base area: 1900 mm total power requirement: 22 KW weight of the machine ca.: 30 t dimensions of the machine ca.: . m Nominal force: 1000 kN Top plate pivots Table is movable The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for t ...

pressure: 300 t distance between columns: 1350/1000mm mm stroke: 500 mm weight of the machine ca.: 20 t table surface area: 1900x1600 mm ram surface: 1900x1600 mm table height: 1000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t table length: 670 mm table width: 570 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydr. Spotting press MILLUTENSIL type BV 25 PMMasch. No. 632 / 25111 Year of construction 1991Clamping force 18 ton. Opening force 15 ton. Table surface 775 x 760 mm Clamping surface of the upper table 900 x 550 mmStand width 900 mmInstallation height max. 750 mmInstallation height min. 230 mmStroke of the upper table 520 mmLifting speed stepless 0 - 1000 mm/min. Hydraulic pressure adjustable 10 - 200 barTool weight on the table max. 2500 kgTool weight on the upper table max. 800 kgTable height

pressure: 20 t table length: 670 mm table width: 570 mm total power requirement: 8 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 2 x 2 x 3 m No. 2886 Spotting press 200 kN RICE TUS 60 OK 20 Stroke approx. 700 Drive: 7,5 kW Hydraulic control Extendable table 670 x 570 mm, Swivel-out top plate 670 x 570 mm, Installation height 740 mm Clearance between the columns 620 mm, Space requirement L/W/H 1870 x 1620 x 3000 mm, Weight approx. 3.5 to. Asking price: 8.500,-- ex works / EXW Asking price: 12.900,-- EXW warehouse loaded free on suitable truck The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t table length: 1280 mm table width: 900 mm total power requirement: 7 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 3 x 2 x 3,6 m m No. 5282 Spotting press 400 kN REIS TUS 90 OK 40 Working area: table 900 x 1280 Column passage 930 x 705 mm Table top 900 x 1280 mm ram plate 900 x 1200 mm Installation height 1035 mm Space requirement approx. 3 x 2 x 3.6 m Transport dimensions approx. 4 loading meters, width 2.20 / height 2.80 Weight approx. 8 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity 50 tons Stroke 750 mm Table size 1500x1000 mm

Key data: 50 t, 1100 mm, 800 mm

Used spotting press, manufacturer Reis, type TUS 80, built in 1999, For more data, see machine map. The sale takes place from the site without dismantling.! The machine was fully functional until the end.

Key data: 100 t

For sale is a used spotting press from the manufacturer Reis with an adjustable press force of up to 100 t. The 4-column press has a table size of 1600 × 1300 mm, a maximum open height of 950 mm and an ejector in the table, making it particularly suitable for spotting, tuning and tool work in mould and tool making. Here are the technical data of the offered machine: Technical data + information: Spotting press – REIS TUS 80-100 Allgemeine Disclosures - Name: spotting press - Manufacturer: REIS - Type: TUS 80-100 - Type: 4-column press - Year of construction: 1998 - Press force: 26–100 T (adjustable) - Retraction force max.: 45 T - Table size: 1600 x 1300 mm - Max. table load: 5,000 kg - Open height max.: 950 mm - Overall dimensions (WxDxH): approx. 3400 x 4200 x 3700 mm - Total weight: approx. 8,500 kg - T-slots: DIN 650 – 22 mm Hydraulik - Hydraulic pum ...

pressure: 200 t table length: 2200 mm table width: 1550 mm dayligth: 2200 mm ram return capacity: 6.000 kg table load capacity: 10.000 kp total power requirement: ? ca. 25-30 kW weight of the machine ca.: 30 t dimensions of the machine ca.: 4 7 7 m Packing: ca. 13,4 x 3 x 3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t table length: 1800 mm table width: 1550 mm table travel: 2000 mm dayligth: 1800 mm total power requirement: 19,5 KVA weight of the machine ca.: 22 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 4000 kN table length: 2500 mm table width: 2000 mm dayligth: 2500 mm stroke: 2600 mm tank capacity: 1000 l total power requirement: 56 kVA weight of the machine ca.: 85 t dimensions of the machine ca.: 9,2 x 3,1 x 8,2 m integrated wax-injection unit with 0-5 bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 40 t, 1280 mm, 900 mm

For sale is a spotting press from the manufacturer REIS with a maximum pressing force of 40 t. The machine has a table size of 1,280 × 900 mm, a maximum installation height of 1,035 mm and a stroke of up to 1,100 mm, making it suitable for spotting work, coordination processes and tool adjustments in mold and tool making. Technical data + information: Spotting press – 40 t – 1,280 × 900 mm General information - Type: 4-column press - Manufacturer: REIS - Year of construction: 1984 - Press force: 40 T (adjustable) - Restoring force: 20 T - Distance between columns: 930 × 705 mm - Max. installation height: 1,035 mm - Table size: 1,280 × 900 mm - Overall dimensions (WxDxH): approx. 3,800 × 1,850 × 3,600 mm - Total weight: approx. 9,000 kg - T-slots: DIN 650 – 18 mm Hydraulic cylinders - Stroke: 0–1,100 mm (adjustable) - Cylinder diameter: Ø 160 mm  ...

G+K spotting press HPV 60 S very good condition ! technical data see picture... available at short notice from location.

Machine has a frame crack in the upper area To deploy the machine, the basement must be completely supported with supports, the floor must be covered with heavy-duty plates and no forklift can be moved in the hall! Incl. base plates The costs for dismantling/spreading and loading are estimated at about 12000€ Pick-up date: 19.08 - 21.08 Auction-ID: A1-48584-78

Key data: 40 t, 1280 mm, 900 mm

Spotting and Experimental Injection Press REIS TUS 90 OK-40T Year of construction 1975 40 t pressing force Clamping surface 900 × 1280 mm Stroke 1150 mm Tool weight up to 7 t Movable ejector Hydraulic motor 5.5 or 7.5 kW Machine weight approx. 7 t

4x Bow Rail 2x prism rail 2x flat rail Auction-ID: A1-48591-39

pressure:250 t table length:4000 mm table width:3000 mm Controls:SIEMENS SIMATIC C7 PRESS DESIGN:. - frame design : 4 column :. - moving bolster : yes :. PRESS FORCES:. - total force (nominal):250 to PRESS TABLE:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mm - tool weight max.:100000 kg - number of T-slots:12 - distance between T-slots:375 mm - height above floor level:390 mm RAM:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mm - number of T-slots:12 - distance between T-slots:375 mm - stroke:2900 mm - tool weight max.:50000 kg RAM (HYDR. PRESS):. - number of main-cylinders:1 - approximation velocity max.:180 mm/s - working velocity max.:50 mm/s - restoring force of ram:95 to TOOL ASSEMBLY DIMENSIONS:. - distance table - ram max.:2750 mm - distance between columns (H-frame):4100 mm - Free passage be ...

REIS TUS 70 OK-70 – 4-Column Hydraulic Spotting Press General data: Manufacturer: Reis Model: TUS 70 OK-70 Machine number: 01.094.00 Year of manufacture: 1991 Machine type: 4-column spotting press (hydraulic) Weight: approx. 8000 kg Technical details: Pressing force: 700 kN Maximum pressure: 220 bar Equipment: Hydraulic swing-out upper table Movable lower table Control system: Reis PE-NC2511 Description: Industrial 4-column hydraulic spotting press REIS TUS 70 OK-70 designed for die spotting, tool adjustment, and mold alignment operations. The machine features a robust construction, movable lower table, and hydraulic swing-out upper table, enabling precise positioning and efficient setup processes in toolmaking and production environments. Auction-ID: A7-48441-83

length:1500 mm width:1000 mm weight of the machine ca.:0,2 t dimensions of the machine ca.:1,5 x 1 x 0,8 m Surface plate / Welding bench with underframe Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2024, Josef Weber. All rights reserved.

pressure:40 t distance between columns:620 mm stroke:975 mm distance table/ram, max. stroke up, adjustment up:940 mm table surface area:590 x 1000 mm table height over floor:770 mm ram surface:590 x 1000 mm side window:470 mm max. tool weight:2,5 t max. capacity of swivelling ram plate:1,5 t Speed down:0 - 50 mm/s Speed up:0 - 34 mm/s Working speed:0 - 10 mm/s oil volume:150 l power requirement:9,5 kW weight:3,2 t dimensions (WxDxH):2,0 x 2,4 x 3,0 m

pressure:100 t distance between columns:1250 mm stroke:1035 mm table surface area:890 x 1280 mm distance table/ram, max. stroke up, adjustment up:1035 mm table height over floor:630 mm ram surface:1000 x 1200 mm side window:700 mm max. tool weight:7 t max. capacity of swivelling ram plate:3,5 t oil volume:180 l power capacity:9,0 kW weight:11,0 t Dimensions (WxDxH):2,1 x 3,8 x 3,9 m ram interlocking:hydraulic

pressure:70 t distance between columns:750 mm stroke:900 mm table surface area:700 x 1000 mm Distance table/ram, stroke up:900 mm table height over floor:680 mm ram surface:700 x 1000 mm side window:600 mm max. tool weight:5,0 t max. capacity of swivelling ram plate:2,0 t Speed down:0 - 50 mm/s Speed up:0 - 48 mm/s Working speed:0 - 8 mm/s oil volume:140 l power capacity:9,5 kW weight:8,0 t Dimensions (WxDxH):2,2 x 1,2 x 3,7 m