spoon used for sale

Backhoe bucket, excavator bucket, demolition bucket -Execution: stable -Content: 175 l -Width: 500 mm -Height: 550 mm -Depth: 1000 mm -Quick change holder -Carrier device: Hekomat SKL08 -Ripper teeth -The mounting on the spoon can be changed by us at an additional cost -Own weight: 210 kg

Excavator buckets / rock bucket, very stable, unused The geometry corresponds to a Fang, the tooth holder / cutting edge is rounded, this high performance, grave. Bucket width: 1500 mm Bucket volume: 1 m 3 (piled) base plate for quick coupler: 520 mm (width) x 640 mm (depth) Excavator size: 18-30 to use weight

Tilt bucket, excavator bucket, tilt bucket, ditch cleaning bucket, trench bucket -hydraulically controllable -Total width: 1600 mm -Height inside: 400 mm -Depth: 500 mm -Locating pin: Ø 45 mm -Intermediate dimension: 165 mm -Weight: 200 kg

Mold Measured Spoon (baby food), 12 sockets out of 16 work

we sell 1 of 2 used tray / carton setup with an additional magazine for a package leaflet or e.g. Spoon that is placed in the box and glued to the bottom. The tray / carton erector has 2 Nordson hot glue devices (Pro Blue) each and is completely built in V2 A (also the control cabinet). The system is adjustable in terms of cardboard height and width as well as length, but are set to a currently fixed level. The systems are in a very good used condition as they were in stock after a factory closure (optical condition is almost as new). The special feature of the system is that a vision system (by KEYENCE) is installed in the system, which can check a correct insertion of the package leaflet or the spoon and can stop the system if it is not executed correctly (looks at the tray from above). The system is immediately available and could also be converted to other tray types (stacking corner ...

used Watermaster Classic suction excavator / dredger construction year: In 1993 working weight: approx. 19 metric tons transport length: 12.4 m transport height: 3.2 m transport width without side pontoons: 3.2 m pontoon frame height: 1.2 m spoon: 360 l shovel: 700 l

Inhalt:2.6m? Gewicht:1220kg spoon and Schaufeltyp:ERDSCH Schnittbreite:2700 mm dental system 1U3252 lower hole admission is 50 mms of diameter. upper hole admission is 70 mms of diameter. the shovel is in good one was entitled.

Vehicle data: Make: Komatsu, Type: PC16R-3H, Drive type: Diesel, \Year of construction: 0, Internal no.: 1305, Mast data: Dimensions: Battery & Charger: Description & Special equipment: Attachments: Quick coupler, Bucket, bucket in 400 mm and 600 mm -Ditch clearing bucket hydraulic 1000 mm Special equipment: Front tyres: 0 x / Rear tyres: 0 x / / Description: We rent a brand new KOMATSU mini excavator type PC16R-3H with tiltable ROPS/FOPS cab and heating, proportional control (via EPC lever) HCU-A and 2 work lights on the cab front (HCU-A/EPC) (NOT in conjunction with Utility KOMTRAX for cabin) Basic machine with hydr. adjustable undercarriage, 2 speeds with auto-shift-down, servo pre-control, swivel boom, 2-way additional hydraulics to boom (switchable to hammer operation), variable displacement pump (210 bar), protective cover on the boom lifting cylinder, work lights on the boom, doz ...

Hydraulic excavator chain excavator crawler excavator Manufacturer: Hyundai Type: ROBEX 280 LC Built ca.1999 6 cylinder four-stroke diesel engine Engine model: Cummins 6BT 5.9 / 128 hp Chassis length approx.: 4900 mm Cab height approx.: 3000 mm Chassis width: 3400 mm extra width quarry bog chain, chain width approx.: 810 mm Weight about 30 tons. Deep Spoon Oscar Meier AG Type ASM 100 Pinion repaired from the rotary gearbox and seals of rotary entry.

Backhoe bucket, excavator bucket, demolition bucket, trenching bucket -execution: stable -Width: 500 mm -Height: 900 mm -Depth: 1100 mm -Admission intermediate dimension: 185 mm -Bore mounting: Ø 50 mm -ripping teeth -The mounting on the spoon can be changed by us at an additional cost -Own weight: 190 kg

COVER LABELING SYSTEM SCHLEUTER GU 2 DO WITH 2xSTATIONS FOR PLACING SPOONS M. No.: 12087 Performance: 90 lids per minute (spoon inserted diagonally) Consists of: - Stacker - 2xStations for placing spoons - Labeling unit - Delivery station

Backhoe bucket, excavator bucket, demolition bucket, trench bucket, excavator bucket -Execution: stable -Width: 485 mm -Height: 450 mm -Depth: 620 mm -Admission intermediate dimension: 141 mm -Bore mounting: Ø 40 mm -The mounting on the spoon can be changed by us at an additional cost -Own weight: 90 kg

Backhoe bucket, excavator bucket, demolition bucket, trenching bucket -Execution: stable -ripping teeth -extended cutting edge -Width: 585 mm -Height: 700 mm -Depth: 900 mm -Socket: Ø 45 mm -Width inside: 165 mm -The mounting on the spoon can be changed by us at an additional cost -Own weight: 154 kg

Backhoe bucket, excavator bucket, demolition bucket, trench bucket, excavator bucket -Execution: stable -Width: 595 mm -Height: 680 mm -Depth: 700 mm -Admission intermediate dimension: 180 mm -Bore mounting: Ø 51 mm -The mounting on the spoon can be changed by us at an additional cost -Net weight: 152 kg

Backhoe bucket, excavator bucket, demolition bucket, trenching bucket -Execution: stable -ripping teeth -Width: 790 mm -Height: 500 mm -Depth: 700 mm -Socket: Ø 40 mm -Width inside: 150 mm -The mounting on the spoon can be changed by us at an additional cost -Own weight: 108 kg

Backhoe bucket, excavator bucket, demolition bucket, trenching bucket -Execution: stable -Width: 280 mm -Height: 750 mm -Depth: 1100 mm -Admission intermediate dimension: 165 mm -Bore mounting: Ø 45 mm -Ripper teeth -The mounting on the spoon can be changed by us at an additional cost -Own weight: 150 kg

Backhoe bucket, excavator bucket, demolition bucket, trenching bucket -Execution: stable -Width: 420 mm -Height: 700 mm -Depth: 1200 mm -Admission intermediate dimension: 210 mm -Bore mounting: Ø 50 mm -Ripper teeth -extended cutting edge -The mounting on the spoon can be changed by us at an additional cost -Own weight: 180 kg

Mini excavator bucket, backhoe bucket, backhoe bucket, demolition bucket -Width: 470 mm -Height: 470 mm -Depth: 600 mm -Admission intermediate dimension: 135 mm -Bore distance: 110 mm -Bore: Ø 35 mm -Ripper teeth -extended cutting edge -The mounting on the spoon can be changed by us at an additional cost -Own weight: 80 kg

Backhoe bucket, backhoe bucket, trench bucket, ditch cleaning bucket -Width: 300 mm -Height: 600 mm -Depth: 800 mm -Admission intermediate dimension: 255/200 mm -Bore: Ø 45/50 mm -Ripper teeth -extended cutting edge -The mounting on the spoon can be changed by us at an additional cost -Own weight: 100 kg

Backhoe bucket, excavator bucket, demolition bucket -Width: 600 mm -Height: 600 mm -Depth: 800 mm -Admission intermediate dimension: 255/200 mm -Bore: Ø 45/50 mm -Ripper teeth -The mounting on the spoon can be changed by us at an additional cost -Own weight: 160 kg

Backhoe bucket, excavator bucket, demolition bucket, trench bucket, excavator bucket -Execution: stable -Width: 710 mm -Height: 1000 mm -Depth: 1500 mm -Admission intermediate dimension: 350 mm -Bore mounting: Ø 80 mm -Ripper teeth -elongated cutting edge -The mounting on the spoon can be changed by us at an additional cost -Own weight: 700 kg

Backhoe bucket, excavator bucket, demolition bucket, trenching bucket -Execution: stable -Width: 280 mm -Height: 750 mm -Depth: 1000 mm -Admission intermediate dimension: 290 mm -Bore mounting: Ø 60 mm -Ripper teeth -extended cutting edge -The mounting on the spoon can be changed by us at an additional cost -Own weight: 340 kg

Backhoe bucket, excavator bucket, demolition bucket -Execution: stable -Width: 570 mm -Height: 450 mm -Depth: 600 mm -Admission intermediate dimension: 160 mm -Bore distance: 220 mm -Bore: Ø 45 mm -extended cutting edge -The mounting on the spoon can be changed by us at an additional cost -Own weight: 130 kg

Backhoe bucket, backhoe bucket, demolition bucket -Execution: stable -Content: 175 l -Width: 680 mm -Height: 650 mm -Depth: 700 mm -Quick change holder -Admission intermediate dimension: 260 mm -Ripper teeth -The mounting on the spoon can be changed by us at an additional cost -Net weight: 230 kg

Backhoe buckets, excavator buckets, demolition buckets, ditch buckets, excavator buckets, ditch cleaning buckets -Manufacturer: KSW, backhoe type TL LK5-600 -Intake: KSW03L -Width: 600mm -Content: 158 liters -Recording on the spoon: can be changed by us for an additional charge -Dimension: 935/600/H690 mm -Own weight: 152 kg

Backhoe bucket, excavator bucket, demolition bucket, ditch bucket, excavator bucket -Excavator bucket: heavy design, very stable -Width: 1220mm -Height: 950mm -Depth: 1380mm -Recording: Atlas 1704, dimensions see photos -ripper teeth -Load hook -the recording on the spoon: can be changed by us for an additional charge -Own weight: 814 kg

Backhoe bucket, excavator bucket, demolition bucket, trenching bucket -Execution: stable -Width: 275 mm -Height: 715 mm -Depth: 1020 mm -Admission intermediate size: 185 mm -Bore mounting: Ø 50 mm -The recording on the spoon: can be changed by us at an additional cost -Own weight: 120 kg

Backhoe bucket, excavator bucket, demolition bucket, trench bucket, excavator bucket -Execution: stable -Width: 415 mm -Height: 450 mm -Depth: 405 mm -Admission intermediate dimension: 98 mm -Bore mounting: Ø 25 mm -The recording on the spoon: can be changed by us at an additional cost -Own weight: 26 kg

Backhoe bucket, excavator bucket, demolition bucket, trenching bucket -Execution: stable -Width: 420 mm -Height: 1010 mm -Depth: 1370 mm -Admission intermediate dimension: 275 mm -Bore mounting: Ø 60 mm -Ripper teeth -The recording on the spoon: can be changed by us at an additional cost -Own weight: 360 kg

Backhoe bucket, excavator bucket, demolition bucket, trenching bucket -Execution: stable -Width: 290 mm -Height: 780 mm -Depth: 930 mm -Admission intermediate dimension: 205 mm -Bore mounting: Ø 45 mm -Ripper teeth -The recording on the spoon: can be changed by us at an additional cost -Own weight: 116 kg

Backhoe bucket, excavator bucket, demolition bucket, ditch bucket -Execution: stable -ripper teeth -Width: 590mm -Height: 1070mm -Depth: 1590mm -Recording: Ø 80 mm quick coupler Lehnhoff type MS20 -Width inside: mm -the recording on the spoon: can be changed by us for an additional charge -Own weight: 506 kg

Backhoe bucket, excavator bucket, demolition bucket, trenching bucket -Execution: stable -ripping teeth -Width: 570 mm -Height: 540 mm -Depth: 980 mm -Take: Ø 50 mm -Width inside: 189 mm -The mounting on the spoon can be changed by us at an additional cost -Dimensions: 1060/570/H700 mm -Own weight: 142 kg

Backhoe bucket, excavator bucket, demolition bucket, trenching bucket -Execution: very stable -Width: 850 mm -Height: 1060 mm -Depth. 1600 mm -Zeppelin quick change adapter NADO -ripping teeth -Number: 2x excavator buckets available -Price: per piece -The mounting on the spoon can be changed by us at an additional cost -Dimensions: 850/1600/H1060 mm -Own weight: 600 kg

Backhoe bucket, excavator bucket, demolition bucket, trenching bucket -Execution: stable -ripping teeth -Width: 540 mm -Height: 560 mm -Depth: 1060 mm -Socket: Ø 45 mm -Width inside: 168 mm -Dimensions: 1100/540/H700 mm -The mounting on the spoon can be changed by us at an additional cost -Own weight: 144 kg

Backhoe bucket, backhoe bucket, ditch cleaning bucket, trench bucket -Total width: 2530 mm -Height inside: 700 mm -Depth: 850 mm -Locating pin: Ø 70 mm -Intermediate dimension: 370 mm -The mounting on the spoon can be changed by us at an additional cost -Weight: 700 kg

Cartoner with bottle infeed and spoon fedder Manufacturer CAM Model HS Located in United Kingdom

Machines that roast coffee from 1kg to 500kg at a time are produced. Capaccity of EKO 1K is 1,5 kg per batch.EKO 1K Coffee roasting machine of heating is electric.The coffee roasting machine is made by welding St 37 welded material. Our coffee roasting machines • Control sample spoon and sample viewing glass • Independent of cyclone dust collectors • Roasting and cooling at the same time • High capacity cooling system • It consists of a temperature control system.

Machines that roast coffee from 1kg to 500kg at a time are produced. Capaccity of EKO 5K is 5 kg per batch.The coffee roasting machine is made by welding St 37 welded material. Our coffee roasting machines • Control sample spoon and sample viewing glass • Independent of cyclone dust collectors • Roasting and cooling at the same time • High capacity cooling system • It consists of a temperature control system. As fuel Gas (compressed ore natural gas) and DIESEL can be used. Also electric can be ordered for heating .

ID3035 Caterpillar 374F LME year/Year of construction 2015 approx. 9800 hours/hours Mono boom, Cab protection grid, stick 2.55 ME Mass Excavator, central lubrication, lift cylinder protection, pipe rupture valves, Reversible fan manually, Löfflel 5.0 cbm KVX (floor is still being renewed), wear then 75% good, overall drive 70% good Mono boom, cabin protection grille, stick 2.55 ME Mass Excavator, central lubrication, lifting cylinder protection, pipe burst protection, reversible fan manual, spoon 5.0 cbm KVX (floor is still being renewed), wear condition then 75 % good, undercarriage over all 70 % good

Machines that roast coffee from 1kg to 500kg at a time are produced. Capaccity of EKO 20K is 20 kg per batch.The coffee roasting machine is made by welding St 37 welded material. Our coffee roasting machines • Control sample spoon and sample viewing glass • Independent of cyclone dust collectors • Roasting and cooling at the same time • High capacity cooling system • It consists of a temperature control system. As fuel Gas (compressed ore natural gas) and DIESEL can be used. Also electric can be ordered for heating .

Lid placing machine, make Laue Engineering, year 2018, used for tin cans with a diameter of 127 mm (dried milk), Slip lid with integrated spoon (10 ml), Consisting of:, can conveyor, for the supply of the cans, feed generation in front of the separation station and transfer of the finished article (can with lid)., execution: Welded frame made of stainless steel with Intralox conveyor belt, drive motor, feed star and goods security, cover conveyor: Feeding of the lids to the lid placer, execution: Welded stainless steel frame with Intralox conveyor belt, drive motor and article surveillance, lid setter: Separation, positioning and joining of cans and lids, return of finished part to can conveyor, execution: Welded frame made of stainless steel with carousel (8 stations), drive motor and goods security and complete cladding; switch cabinet, Destacker: Lid magazine and lid feeding on lid co ...

1. ) Lawn fan three-point attachment, frame with 9 heavy cast iron discs equipped with 8 triangular knives each, penetration depth up to 11 cm. Working width approx. 170 cm. 2.) Lawn fan three-point attachment, frame with 9 heavy cast iron discs equipped with 8 3/4" hollow spoons, penetration depth up to 12.7 cm. Working width approx. 180 cm. Other aerifiers as well as verticuators with rotating tools stock. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...

IMA CARTONING MACHINE, MODEL K150C Year of manufacture: 1995 (overhaul: 2011) K150 is an accessible, reliable and efficient cartoner ensuring quiet running at high speed. Its carton prebreaking and opening system combined to extrapositive carton handling by multiple belts ensures best carton forming control. Its design allows fast access and easy cleaning. The machine is equipped with a feeding system for bottles, a feeding system for vials, a GUK Cartonac 81 FA21/ 4 leaflet feeder, IncJet printing and control unit, Antares Vision print control system. TECHNICAL DATA Frequency: 50 Hz Voltage: 380 volts Power: Kw 4,5 Weight: Kg 1500 Production characteristics: Min carton dimensions: mm 20 x 12 x 50 Max carton dimensions: mm 85 x 60 x 190 Max production: 150 cartons/min Pressure: 6 ATM The K150 can handle a wide range of product feeding groups (bottles, squeezable  ...

Shovel with a shield Side tilt angle adjustable Shield L 135 cm x W 62 cm Shovel L 110 cm x W 55 cm x H 40 cm many more shovels and spoons available! , Condition state: Sufficient (condition state 3)

COVER LABELING SYSTEM SCHLEUTER GU 2 DU WITH CIRCULAR STATION FOR PLACING SPOONS RNA SRC-N-630-1R M. No.: 12086 Performance: 60 lids per minute Consists of: - Stacker - Circular station for placing spoons - Labeling unit - Stapler

Fork for skid steer loader many more shovels and spoons available! , Condition state: Sufficient (condition state 3)

fully hydraulic wheeled excavator Liebherr 912, built in 1986 4 times twin tyres. 70 KW 6 cylinder Deutz engine. Rideable on the road. Additional hydraulic connections for chisels. Device is operational. Equipment : trench bucket, bowl gripper, 3 normal spoons in different widths. Total weight 18 tons (can be driven on a low-loader)