spm used for sale

"PAWERT" SPM I-90/200 Manufactoring in 1992, reconditioned in 2016 Mechanical single head crank-type Briquette Press for continuous Heavy Duty operation. - Capacity: 2,650 Lbs/Hr (1,200 kg/Hr) depending on raw material quality. Briquette dimensions: 3-1/2" (90 mm) dia.; 3/4" to 11-3/4" (20 - 300 mm) length. Main drive: 75 HP (55 kW installed). High quality welded steel construction. Belt driven flywheel drive. Pre-Heated oil Chamber. This press has (200) press strokes per minute forcing the material through an extrusion chamber to produce uniform material at a high pressure; significantly reducing the volume from of chips/dust to a densified log. This line also has: fully automatic cutting saw control box. < Conveyor Belt. KALLFASS UNIVERSAL Type "600" Shrink Tunnel for packaging. The PAWERT Press was reconditioned in 2016 This is a complete line. it just needs the ...

Spindle module BOSCH Type SPM 50-TB 062353-106 520 V DC 50 A used, tested ! Dimensions: 395 x 330 x 120 mm

Long-term relays, program timer VEB RELAISTECHNIK Großbreitenbach SPM - 220 V/WS 10 U/A-3 min G Supply voltage: 220 V AC 50 Hz < br /> t: 180 sec 5 Switch Switching capacity: 16 A 380 V AC 50 Hz IP20 New ! Dimensions (packaging): 230 x 150 x 150 mm

Stock# U2347-1 Used mixer by Buhler (CH) type SPM-50-HT with butterfly/tri-foil agitator for work on vacuum. Mixer has contact parts designed in non-corrosive steel. Mixing shaft has length about 1750 mm and is equipped with butterfly agitator, with three paddles and external diameter 1040 mm. Top cover is equipped with two pneumatic accutators and fits mixing pans with diameter 1100 mm. Cover can be rised up to 500 mm. Agitator is belt driven by el motor 45 kW, 1470 rpm, 380/660 V, 50 hz. Mixer is hydraulically risen about up to 90 cm. Machine is equipped with local control panel by Siemens with touchpad and electric cabinet. Machine is also equipped with hydraulicaly operated post for mixing can. Working pressure in mixing tank can reach 0.3 bar. Machine had been working on paints. Mixing pan is not included.

SPREMATEC – Baking system SPM 30 for cast wafer products Condition: Demonstration system Number of baking plates: 30 pieces Baking plate size: length: 390 mm, width: 2 x 55 mm for cast waffle cones other poured waffle products are also possible on request incl. discharge belt and packing tray

Schneidmaschine - Guillotine Wohlenberg 76 SPM Serial-No. 3212-011 Schnittbreite max. 760mm / Cutting width max. 760mm Programm - Duisplay / Program - Display Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives In einem guten Zustand - in very good Condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Cutting machine Wohlenberg 92 SPM, machine number 3388-010, program control, air table, light barriers, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Cutting machine Wohlenberg 76 SPM, machine number 3364-037, air table, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Air table 2 side tables 3 knives Photo cells Program

Dosing pump, diaphragm dosing pump unused Seko 3 head diaphragm dosing pump Stainless steel pump housing Built: 2016 Engine 7.5 kW 380/660 V Pumps Temperature range: -20/30 °C Type 1T10N12FB Capacity: max 11.4 l/h Pressure max 60 barg Speed. max 117 SPM Type: 1T30N12FB Capacity: max 108 l/h Pressure max 60 barg Speed. max 117 SPM Type 1T50N32FB Capacity: max 598 l/h Pressure max 60 barg Speed. max 117 SPM Actuators: Seko SRE.40AA2000 Rotork R-250 with pulsation damper and accessories as shown in photos Shipping dimensions: approx. 1800 x 1800 x 1800 mm Sale also possible in parts! The pump comes from a research facility and has never been used. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Bruderer BSTA 18 600 spm High-performance speed from 100-600 spm Force Max 180 KN Adjustable stroke New Silicon control Pneumatic and hydraulic all new Strip width max 190 mm Feed Bruderer BBV With digital stroke counter with programmable auto stop and digital speed counter Overhauled, very good condition, ready to work.

Press type: PME 315 T Drive system: Eccentric Type of used tools Progressive Nominal force: 3150 kN Rating above BDC mm Material flow L->R - Maximum SPM: 75 1/min Minimum SPM: 20 1/min Maximum shut height: 525 mm Minimal shut heigh:t 325 mm Slide adjustment: 130 mm Maximum slide stroke: 210 mm Minimum slide stroke: 40 mm Bolster specification Bolster dimension: 2220 x 1225 mm T-slots in bolster: T28 H8 DIN650 - Draw cushion N/A - Draw cushion stroke: N/A mm Draw cushion force: N/A kN Draw cushon dimension: N/A mm Maximum weight: kg Ram specification Ram dimension: 2220 x 1225 mm T-slots in ram: T28 H8 DIN650 - Max. upper die weight: 3600 kg Tool manipulation Tool is manipulated by forklift - Max. tool weight: 5500 kg Forks size/pitch: 150x60/940 mm Lower die clamp height: 50 mm Upper die clamp height: 50 mm Tool locating (centering) stůl/bolster  ...

HAULICK HPV 75 Eccentric Press Maximum pressing force 75 t Bottom working table 640x540 mm Maximum number of strokes per minute (manual work) 50 spm Maximum number of strokes per minute (automatic work) 270 spm Min. length of the slider stroke 7 mm Max. length of the slider stroke 78 mm Certified by SCHULER 04.08.2012

DEAR'S SALE, NEW DRIVERS 4 PCS 2301A LOAD SHARING & SPEED CONTROL 1 PC 2301D DIGITAL LOAD SHARING & SPEED CONTROL 3 PCS SPM-A SYNCHRONIZER 1 PC 2301A SPEED CONTROL 1 PC LOAD SHARING MODULE Brgds Hakan KUSCU +905323642509 info@kscege.com

Manufacturer: SCHULER Model: ES2 400 T Year of manufacture: 1984 Condition: Very good Location: Rudniki - Poland Press Capacity: 400 Tons Rated Tonnage Point 12.5 mm The Height: 1018 mm Slide Adjustment: 305 mm Slide Stroke: 610 mm Bolster Size: 2743 x 1524 mm Slide Size: 2743 x 1524 mm SPM: 20 The Cushion Capacity: 70 tons x 2 pcs. The Cushion Stroke: 203 mm Main Motor Capacity: 60 KW Moving Bolster: Front Exit

Mechanical Press SCHULER ES2 400 T Manufacturer: SCHULER Model: ES2 400 T Year of manufacture: 1978 Condition: working. Press capacity 400 T Slide stroke 610 mm slide adjustment 305 mm Die Height 1018 mm bolster size 2743 x 1524 mm number of strokes 20 SPM required power 82 kW table height over floor 400 mm Die cushion capacity 70 T Die cushion stroke 203 m weight app. 120 T Stroke dia at four pressure points: 400 x 190 mm Stroke dia for pressure transformer: for pneumatic: 200 mm for hydraulic: 30 mm extending table: Pulling device in the table: Puller quantity: 2 pieces Pneumatic cushion quantity: 2 pieces Pressure plate surface on cushions: 1170 x 977 mm Impact diameter: 1000 mm Push stroke: 203 mm Total force at pressure above 6 atm. : 70 Mp

Press Erfurt Model: PKZZ-III-250-1FS YOM: 1980 Press capacity: 250 ton Table size: 2500 x 1250 mm – slidding table Slide size: 2500 x 1250 mm Slide stroke: 400 mm Max. height of the tool. Position slider SDAU: 954 mm Min. height of the tool. Position slider SDAD: 715 mm Slide adjustment: 250 mm SPM 25 Cushion drawing: operates

Capacity 500 tons Speed 20 spm Bed area 2800 x 1800mm Ram area 2800 x 1700mm Stroke 500mm Die height 1100mm SDAU weight 130 tons

PKZZ 250 Double Column Crank stamping Press Completely overhauled. Electric and Control- Not available. Table 2500 x 1400 mm Ram 2320 x 1250 mm Distance between uprights 2525 mm Window in table width 2300 mm Window in table depth 850 mm Stroke 400 mm Strokes per minute SPM 12 Adjustment of ram 120 mm Shutheight 550 mm Table cushion force 50 to Cushion stroke 160 mm Motor 32 kW Weight ca. 39 tons

Bruderer Automatic Precision Punching Press. Type: BSTA 110H. Max. Pressure: 1100 kN (110 T). Speed range: 100 – 800 spm. Year of production: 1976. Fitted with roller-gripper feed unit BBV 320/200 on left-hand side. Max. strip width: 400 mm. Max. strip thickness: 12 mm. Max. feeding pitch: 200 mm. Adjustable stroke: 16-75. Ram height adjustment: 89 mm. Max. Tool width clearance between columns: 1170 mm. Weight of machine: cca. 26000 kg. Electrical cabinet and control. Oil pump. Oil cooler. Fitted with spring feet dampers. Front and rear safety guards with inspection glass.

NEAGARI SHIBUYA Radial Forging Machine Model BF-350 New 2010 Specifications 1. Machine components (1) Bar-Forging Machine: 1 set (2) Manipulator: 2 set (3) Hydraulic System: 1 set (4) Electric Power & Control System: 1 set (5) Foundation: 1 set (6) Unloader: 1 set (7) Work Support: 6 set (8) Work Support (center): 2 set (9) Mandrel (IN): 1 set (10) Mandrel (OUT): 1 set (12) Die Changing Unit: 1 set 2. Work Piece 2-1. Material (1) Tool Steel (EX. DIN-X40CrMoV51AISI-H13JIS-SKD) (2) C-steel 2-2. Starting Dimension (1) Round: max. diameter 450mm (2) Square: max. flat to flat 240mm (3) Max. Length: 3500mm (4) Max. Weight: 3000kg 2-3).Forged Dimension (1) Min. Diameter: 80mm (2) Min. Square: 120mm (3) Max. Length: 8000mm (4) Max. Weight: 3000kg 3. Bar Forging Machine 3-1. Forging Ability (1) Number of rams: 4 (2) Force / ram: max. 7000kN (3) Hydrau ...

10′ x 3/8″ Cincinnati Mechanical Shear Material Length: 10′ Material Thickness: 3/8″ Front Guage Gap: 4″ Speed: 60 spm Auto Lube Number of Hold-Downs: 11 Electric Foot Pedal Digital Control Motor: 8HP AC

year 1985 Capacity 2500 / 2750 Ton 24900 / 27400 kN Speed 65 SPM, continuous mode Ram/Slide Stroke 12.60in, 320.00mm Ram/Slide Adjustment 0.39in, 10.00mm Shut Height (Ram / Slide Down, Adjustment Up) 35.60in, 905.00mm Stroke of Upper Knockout 2.00in, 50.00mm Stroke of Lower Knockout 2.80in, 70.00mm Ram/Slide Width 52.00 in, 1320.00 mm Ram/Slide Height 43.00 in, 1100.00 mm Bed Width 53.00 in, 1340.00 mm Bed Depth 55.00 in, 1400.00 mm power Existing Additional 28 Strokes per minute in manual mode, height shown is above floor, total height is 291 in ( 7390 mm), new quick change hydraulic type bolster Machine Length 160.00 in, 4055.00 mm Machine Width 157.00 in, 4000.00 mm machine height 264.00 in, 6710.00 mm Weight 320000 lbs, 145455 kg Condition Excellent Currently disassembled an ...

12′ x 1/4″ Cincinnati Mechanical Shear Material Length: 12′ Material Thickness: 1/4″ Model: 1812 Serial # 30782 Gap: 4″ Speed: 60 spm Auto Lube Number of Hold-Downs: 12 Electric Foot Pedal Digital Control Motor: 15HP AC

12″ x .250″ Cincinnati Mechanical Shear Material Length:12′ Material Thickness: 1/4″ Model: 1812 / Serial # 33664 Gap: 4″ Speed: 60 spm Auto Lube Number of Hold-Downs: 12 Electric Foot Pedal Digital Control Motor: 12HPAC

pressure: 2500 t stroke: 360 mm dayligth: - mm ram adjustment: 8 mm table-size: 1500 x 1400 mm ram surface: 1400 x 1400 mm ram strokes: 70 Hub/min Shut Height: 1000 mm main drive: 190 kW total power requirement: - kW dimensions of the machine ca.: - m total wight: - t 2500 ton Sumitomo hot forging press together with a 150 ton Komatsu OBS press - Model: OBS-150 - Capacity: 150 ton - Stroke: 200 mm - SPM: 256 - 50 - Slide Plate: 700 x 650 mm - Bed: 1250 x 780 mm - Die Height: 420 mm - Adjust: 100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity, ton 1000 Slider stroke, mm 400 Unattainable stroke, mm 12 Slider strokes, spm 20 Shut height, mm 730 Distance adjustment between table and slider, mm 200 Slider size, mm 1200 x 1200 Table size, mm 1250 x 1250 Table gap size, mm 800 x 800 Bolster plate thickness, mm 260 Pneumatic cushion capacity (eject), ton 40 Pneumatic cushion stroke, mm 160 Pneumatic cushion load, kg 4500 Main power drive, kW 75 Voltage, V 340 Machine dimensions, mm 4310 x 3820 x 6790 Machine weight, kg 77100

Capacity 250 ton Kinetic energy of moving parts at the end of max. ram stroke 13,5 kj Max. ram stroke 400 mm Number of ram stokes (SPM) 34 Slide clearance 560 mm Ram size (front-back 560 mm Table size 670 x 750 mm Lower ejector capacity 16 ton Lower ejector movement 105 mm Main drive motor powe 15 kW Press dimensions 3710 x 1925 x 4415 mm Press weight 18000 kg

Capacity 250 ton Kinetic energy of moving parts at the end of max. ram stroke 13,5 kj Max. ram stroke 400 mm Number of ram stokes (SPM) 34 Slide clearance 560 mm Ram size (front-back 560 mm Table size 670 x 750 mm Lower ejector capacity 16 ton Lower ejector movement 105 mm Main drive motor powe 15 kW Press dimensions 3710 x 1925 x 4415 mm Press weight 18000 kg

Make: MABU Model: 25 VPR. Made in Germany. Max. Pressure: 250 [kN] (25 [T]) Speed range: 80-400 [spm]. Year of manufacture: 1998. Operating modes: Manual, One-cycle and Automatic. Equipped with two hand start and foot-clamp start. Fixed stroke: 17 [mm]. Ram adjustment: 40 [mm]. Max. Tool dimensions: 400 x 400 [mm]. Power: 3 [kw]. Current: 230 / 400 [V]. Air connection: 5.5 [bar]. Feeder: Silicon SFS 200 on left-hand side. Max. strip width: 200 [mm]. Machine dimensions: H 2350 x W 1700 x D 1400 [mm]. Weight of machine: cca. 2500 [kg]. Electrical cabinet with Mabu Pf 1.3 control. Front and rear safety guards with inspection glass. Technical documentation and operating instructions in English and German included. CE certificate and EUR-1 certificate of origin. On stock, tested and ready for delivery. More used machines from Mabu, Bruderer, Bihler and Schaal available ...

MITSUBISHI GUIDELESS CNC GEAR SHAPER Model ST40A s/n will advise Condition; NEW Condition Delivered and installed July 2020 low hours Less than 1900 hours Machine was delivered and installed 3rd QTR of 2020 and has been hardly used. Customer is looking to sell due to limited work and project loss.machine is available for immediate inspection. Machine is equipped with all required features, Tailstock & Pinion support, chip conveyor and all options. Machine wont last contact us today Machine specifications to follow shortly: -Maximum diameter capacity 18" / 450 mm Option -Maximum DP/ module 3.175 DP/8 mod -Maximum work width 4.52" / 115 mm -Maximum cutter stroke 5.31" / 135 mm -Maximum helix angle + 45 deg -Cutter stroke 30-600 SPM -number of cuts 1-4 -Center distance from cutter Max/ Min 16.73" / -4.92" -Maximum radial travel 21.65" -Height of work table to spindl ...

Hand screw press, Balance SPM YB-3 Pressure max: 20.000 kg width between stand: 380 mm stroke: 200 mm greatest height: 320 mm table bore: Ø 76 mm Balance diameter: Ø 1450 mm table: 1120 x 1120 mm Dimensions: 1450 x 1450 x 2110 mm

Bruderer BSTA200M High-performance automatic punching press. Max. pressure: 200 [kN] (20 [T]). Speed range: 100 - 1800 [spm]. Year of manufacture: 1996. Feed BBV 101/75 on the right-hand side. Max. strip width: 125 [mm]. Max. feed distance: 75 [mm]. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 [mm]. Ram height adjustment: 51 [mm]. Dimensions of the clamping plate (clamping plate): 510 x 400 [mm]. Bed opening: 400 x 160 [mm]. Mbawvyqg Max. distance of the mold width between the columns: 410 [mm]. Max. strip passage width: 260 [mm].= Connected load: 36 [kVA]. Power 400 [V] 50 [Hz]. Control voltage: 24 [V]. Machine dimensions: H 2540 x W 1661 x D 855 [mm]. Machine weight: approx. 3100 [kg]. Control cabinet and control system. Including all original technical documentation. Also high-speed presses in stock: Mabu, Schaal, Bihler and other Bruderer models.

SMERAL LZK 2500 Hot Forging press Fully refurbished in 2024 Capacity: 2500 Ton Speed: 65 SPM, continuous mode Ram/Slide Stroke: 320.00mm Ram/Slide Adjustment: 10.00mm Shut Height (Ram/Slide Down, Adjustment Up): 905.00mm Stroke of Upper Knockout: 50.00mm Stroke of Lower Knockout: 70.00mm Ram/Slide Width: 1320.00 mm Ram/Slide Height: 1100.00 mm Bed Width: 1340.00 mm Bed Depth: 1400.00 mm Power: 130kW Machine Length: 4055.00 mm Machine Width: 4000.00 mm Machine Height: 6710.00 mm Weight: 140000 kg Condition: like new refurbishing report: 1. Mechanical part • Complete disassembly of the press. • Measurement and troubleshooting of all parts. • The main parts of the press are tested (without destruction) in order to identify any defects. Frame: The frame was inspected and non-destructive testing of the most loaded areas was carried out. Damage to the table pl ...

Capacity, ton 630 Stroke path till its position where it develops nominal capacity, mm 16 Slider stroke, mm 320 Slider strokes, spm 20 Max. distance between table and slider, mm 800 Distance adjustment between table and slider, mm 180 Table size, mm 1250 x 1250 Slider dimensions, mm 1000 x 1000 Opening in the table, mm 800 x 800 Thickness of bolster, mm 180 Cushion stroke, mm 130 Main motor power, kW 58 Machine dimensions, mm 3280 x 3470 x 6190 Machine weight, kg 55500

Technical details: 400 ton press – 4 pcs -Manufacturer : SIMPAC -Model : MC2-400 -Y.O.M : 2010 -Capacity : 400 ton -Stroke : 320 mm -SPM : 30 -The height : 700 mm -Slide adjust : 120 mm -Slide area : 2700 x 1200 mm -Bolster area : 2800 x 1300 mm -Bolster thickness : 230 mm -Main motor : 37 Kw 350 ton press – 7 pcs -Manufacturer : SIMPAC -Model : MC2-350 -Y.O.M : 2005 -Capacity : 350 ton -Stroke : 300 mm -S.P.M : 35 -The height : 700 mm -Slide adjust : 120 mm -Slide area : 2600 x 1200 mm -Bolster area : 2700 x 1300 mm -Bolster thickness : 220 mm -Main motor : 37 Kw

Used Mechanical Press MOSSINI 200 ton equipped with electronic feeder and decoiler dimension table 1400 x 750 mm dimension slide 900 x 650 mm stroke min/max 4-180 mm stroke par minute 20-50 spm electroni Feeder 400 x 2 mm model RNM - CE Marked

WEINGARTEN ER 100 Eccentric press Capacity 100 t Table 710 x 570 mm Sheet thickness 12 mm Number of strokes 55 spm Ram stroke 8-112 Ram adjustment 80 mm

1250 TON SMS-HASENCLEVER SCREW DOWN HOT FORGING PRESS YEAR NEW . 1983 YEAR REBUILT . 2012 NEW ELECTRIC CONTROLS 2012 MODEL FPRN-315/750/475/1275 RATED FORCE .. 1020 TONS (10000 kN) MAXIMUM FORCE 2040 TONS (20000 kN) STROKES PER MINUTE ... 23 SPM SCREW DIAMETER ... 12.4" (315 MM) STROKE OF RAM 18.7" (475 MM) STROKE ADJUSTMENT PROGRAMMABLE RAM SIZE (L-R) ... 26.4" (670 MM) RAM SIZE (F-B) ... 39.4" (1000 MM) BED SIZE (L-R) ... 27.9" (710 MM) BED SIZE (F-B) ... 39.4" (1000 MM) WIDTH BETWEEN UPRIGHTS ... 29.5" (750 MM) DAYLIGHT . 31.5" TO 50.2" (800 TO 1275 MM) MOTOR 125 HP

PRESS DESIGN   drive system: eccentric / crank   number of slide actions: 10 SLIDE   stroke rate (max.): 110 /min 10 stations + 1 auxiliary 5 ton per station Distance between stations: 54 mm  (2-1/8") STROKE OF CAMS (STANDARD) #1 25-35 mm  (1- 1-3/8") #2 to #10  25-41 mm, (1 - 1-5/8") Speed: 110 SPM

CONTROLS   PLC PRESS DESIGN   drive system: eccentric / crank   number of slide actions: 12 PRESS FORCES   total force (nominal): 36 to SLIDE   slide force: 3 to   stroke: 38 mm SLIDE (MECHAN. PRESS)   variable speed: yes   main drive power: 4 kW OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 50 mm   feedstock transport direction: front-back STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 50 mm   pilot release system: no   band lubrication system: optional TRANSFER SYSTEM   number of tool stations: 13   distance between tools, stroke X fixed: 63.5 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right ...

CONTROLS   PLC SCHNEIDER PRESS DESIGN   drive system: eccentric / crank   number of slide actions: 11   feedstock transport direction: left to right PRESS FORCES   total force (nominal): 66 to SLIDE   slide force: 6 to   stroke: 114 mm SLIDE (MECHAN. PRESS)   variable speed: yes   stroke rate (min.): 40 /min   stroke rate (max.): 130 /min   main drive power: 7.5 kW STRIP-FEEDER   feeder type: roll feeder TRANSFER SYSTEM   distance between tools, stroke X fixed: 82 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 2875 mm   space requirements -front/back-: 1500 mm   total height: 2900 mm   total weight approx.: 7500 kg ATTACHMENTS (PRESSES)   safety guard / safety door: yes   2-hand engage ...

PRESS FORCES   total force (nominal): 72 to A new electrical control system and a mechanical and lubrication rebuild are required. One used PLATARG model 611 transfer press, high speed type. Full follow cams. Number of stations: 12 Number of rams: 11 + 1 slave Capacity on any one ram: 6 tons Speed range: 30 – 120 SPM Max shell height: 20 mm Transfer slide Machine awaiting refurbishment

PRESS DESIGN   number of slide actions: 12 PRESS FORCES   total force (nominal): 36 to SLIDE   stroke: 44 mm   stroke rate (max.): 160 /min This machine will have the following installed/added to ito new lubricationo new electrical installationo new protectionso CE conformity Number of station 13 (12+1). Capacity on any one station 3 tons. Max stroke 44 mm. Standard stroke cams. Max blank diameter 47 mm. Operating speed range 40 to 160 SPM max. Machine weight approx. 3200 kg.