spit used for sale

The machine is technical and geometrically in a very good state. it was till 2years in use an application and any time inbetrieb are taken. Grter draggable Durchme?er 60 mm the smallest tench-cash Durchme?er 0.5 mm Schleifscheiben-Durchme?er 356 mm Schleifdcheiben width 150 mms control disc-Durchme?er 254 mms control discs width 150 mms Drehzahl-Schleifscheibe 1,780 revo impulse achievement main engine 7 kW speed-control disc 20-250 revos weight 2,900 kg Platzbetarf 8 m²

NEW, suitable for Martin HB100, Year of construction: 2019

Tailstock, counter bearing for dividing head, dividing head -Peak height: 255 mm -Recording: MK4 -Dimensions: see drawing in the images -Dimensions: 600/220/H410 mm -Weight: 84 kg

Sell a Spit P370 Spitfire nail gun, bolt fastener. The machine is in good condition, functional and tested.

Inv. Num. : 8766 Type: SPITFIRE 1500 Producer: Pierce Created: 2012 Parameters: Software: Lantek Expert Duct Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 15 mm Plasma Source: HYPERTHERM 85A Machine height: 1400 mm Machine length: 3650 mm Machine width: 2520 mm Equipment: Exhaust fan

Tailstock, counter bearing for dividing head, dividing head -Tip height: 125 mm -Design: Angle adjustment -Tip mount: MK2 -Dimensions: 260/114/H145mm -Weight: 10kg

Two three phase Spitzenberger grid simulation systems for line conducted EMC tests and grid simulation are available. Output power: 30kW, voltage range: 135V-270V, max. frequency: 5kHz, power stages: PAS 4 quadrant voltage amplifier, signal source: SyCore arbitrary generator, analyzer: ARS reference analyzer, network impedance: AIP. Documentation available. An on site inspection is possible.

Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 101 mm -Dimensions: 85/123/H118 mm -Weight: 4.5 kg

Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 110 mm -Drawing: in the photos -Dimensions: 180/95/145 mm -Weight: 4.2 kg

Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Peak height: adjustable from 75 to 180 mm -Recording: MK2 -Dimensions: 275/240/H260 mm -Weight: 22.5 kg

Tailstock, counter bearing for dividing head, dividing attachment -Top height: 300 mm -Recording: MK2 -Drawing: in the photos -Dimensions: 450/120/H330 mm -Weight: 21 kg

Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 99 mm -Dimensions: 180/92/H144 mm -Weight: 4 kg

Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 110 mm -Dimensions: 218/117/H190 mm -Weight: 11 kg

Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 155 mm -Dimensions: 100/120/H182 mm -Weight: 5.5 kg

Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 185 mm -Dimensions: 235/120/H170 mm -Weight: 32 kg

Dividing head, dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter grinding holder -Peak height: 105 mm -Dimensions: 270/130/H165 mm -Weight: 13.3 kg

Tailstock, counter bearing for dividing head, dividing head, lathe -Tailstock comes from a lathe -Peak height: 145 mm -Recording: MK4 -Dimensions: 410/260/H320 mm -Weight: 51 kg

Tailstock, counter bearing for dividing head, dividing attachment, lathe -Tailstock comes: from a lathe -Tip height: 180 mm -Recording: MK4 -Dimensions: 540/250/H310 mm -Weight: 65.5 kg

Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Peak height: 130 mm -Recording: MK2 -Adjustment of tip from center: - 25 mm -Dimensions: 240/210/H160 mm -Weight: 7 kg

Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Bores for guide: Ø 30 mm -Dimensions: 170/200/H110 mm -Weight: 4 kg

Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 90 mm -Admission: -Drawing: in the photos -Dimensions: 140/135/H160 mm -Weight: 4.7 kg

Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 120 mm -Admission: -Drawing: in the photos -Dimensions: 200/70/H130 mm -Weight: 4 kg

Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 95-205 mm adjustable -Recording: MK2 -Dimensions: 275/260/H265 mm -Weight: 23 kg

Tailstock, counter bearing for dividing head, dividing head -Peak height: 135 mm -Height: adjustable -Recording: MK2 -Drawing: in the photos -Dimensions: 240/115/H140 mm -Weight: 11.8 kg

Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Peak height: 145 mm -Recording: MK2 -Dimensions: 220/190/H150 mm -Weight: 6.5 kg

Tailstock, counter bearing for dividing head, dividing head -Height: adjustable -Recording: Top -Dimensions: 245/280/H200 mm -Weight: 28 kg

Tailstock, counter bearing for dividing head, dividing attachment -Tailstock comes: from a Gildemeister lathe -Tip height: 270 mm -Quill: electrically driven -Foot switch -Recording: MK5 -Number: 1x tailstocks available -Price: per piece -Dimensions: 820/250/H400 mm -Weight: 136 kg

Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 135 mm -Admission: -Dimensions: 165/300/H190 mm -Weight: 8 kg

Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 150 mm adjustable -Admission: -Dimensions: 250/130/H155 mm -Weight: 12.6 kg

Tailstock, counter bearing for dividing head, dividing head -Peak height: 135 mm -Height: adjustable -Recording: MK2 -Drawing with the photos -Dimensions: 220/120/H140 mm -Weight: 11.4 kg

Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 135 mm -Admission -Drawing with the photos -Dimensions: 250/122/H155 mm -Weight: 9.5 kg

Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 89 mm -Height: adjustable -Recording: MK2 -Drawing with the photos -Dimensions: 220/110/H110 mm -Weight: 5 kg

Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 129-131 mm -Height: adjustable -Recording: MK2 -Drawing with the photos -Dimensions: 240/120/H150 mm -Weight: 11.3 kg

Tailstock, counter bearing for dividing head, dividing head -Peak height: 120 mm -Height: adjustable -Recording: MK2 -Drawing with the photos -Dimensions: 170/100/H130 mm -Weight: 6.4 kg

Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 112 mm -Recording: MK2 -Drawing with the photos -Dimensions: 155/120/H115 mm -Weight: 4 kg

Tailstock, counter bearing for dividing head, dividing attachment, lathe -Handover: in the current condition as seen -Bracket: cracked, see photos -Tailstock: center height adjustable, 155 to 165 mm -Dimensions: see the drawing in the photos -Dimensions: 430/175/H210 mm -Weight: 21.7 kg

Brush cylindrical grinder, external cylindrical grinder, internal cylindrical grinder, centering grinder, center grinding machine, hydraulic universal cylindrical grinder, polishing machine -Manufacturer: WMW Heckert, Hydraulic universal cylindrical grinding machine -Spindem lotor: VEB 0.8/1 kW / 1410/2840 rpm -Hydraulic drive: ADDA 0.75 kW -Centre height: 270 mm -Max. material diameter: Ø 320 mm when converted -Brush: max. Ø 250 mm -Center distance: 420 mm -Dimensions: see photos -Base cabinet: with extensive accessories incl. -Dimensions: 1720/920/H1230 mm -Weight: 790 kg

Tailstock, counter bearing for dividing head, dividing attachment, lathe -Tailstock: center height 110 mm -Dimensions: see the drawing in the photos -Number: 2x tailstock available -Price per piece -Dimensions: 130/100/H160 mm -Weight: 2.7 kg/pc.

Moving bezel, bezel, setting stick, lynette -Bezel: riding along -Peak height: 100 mm -Edition: Brass -Technical drawing: see photos -Dimensions: 180/30/H245 mm -Weight: 2.5 kg

Tailstock, counter bearing for dividing head, dividing attachment, lathe -Tailstock: center height 150 mm -Dimensions: see the drawing in the photos -Dimensions: 180/170/H175 mm -Weight: 5.3 kg

Moving bezel, bezel, setting stick, lynette -Bezel: riding along -Peak height: approx. 100 mm -Edition: Brass -Dimensions: see photos -Dimensions: 200/50/H300 mm -Weight: 3.3 kg

Tailstock, counter bearing for dividing head, dividing head, lathe -Tailstock: center height 250 mm -Dimensions: see drawing in the photos -Dimensions: 285/180/H280 mm -Weight: 21.6 kg

Grinding wheel puller, cup wheel puller, double grinder stand puller, surface grinder puller, cylindrical grinder puller, puller head, dressing head for grinding machines, grinding wheel dresser, radius dresser, disc puller -Manufacturer: EHS, grinding wheel dresser, grinding wheel puller -Tip height: 173 to 238 mm -Dimensions: 185/180/H180 mm -Weight: 5.7 kg

Moving steady rest, moving steady rest, steady rest, lynette -Bezel: traveling -Top height: approx. 192 mm -Plating: brass -Dimensions: see photos / technical drawing -Quantity: 2x bezel available -Price per piece -Dimensions: 220/60/H325 mm -Weight: 2.4 kg/pc.

Bezel, moving bezel, bezel, steady rest, lynette -Bezel: moving -Tip height: approx. 170 mm -max. passage: Ø 75 mm -Dimensions: see photos / technical drawing -Dimensions: 365/90/H375 mm -Weight: 10.9 kg.

Bezel, moving bezel, bezel, steady rest, lynette -Bezel: moving -Tip height: 180 mm -Plating: Brass -Dimensions: see photos / technical drawing -Dimensions: 340/70/H380 mm -Weight: 6.3 kg.

Dividing head, dividing apparatus Dividing head, dividing apparatus, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter grinding holder -Manufacturer: Zeatz, dividing head Cabezal Divisor Universal -Tip height: 150 mm -Three-jaw chuck: Bison Ø 160 mm, bore Ø 40 mm -Parting head: swiveling 90° -Spindle bore: Ø 28 mm -Dimensions: 470/440/H240 mm -Weight: 61 kg

tailstock, counter bearing for dividing head, dividing head, lathe -Tailstock: center height 150 mm -Dimensions: see drawing in the photos -Dimensions: 210/105/H240 mm -Weight: 7.0 kg

Bezel, moving bezel, steady rest, lynette -Bezel: moving -Centre height: 145 mm -Plating: Brass -Dimensions: see photos / technical drawing -Dimensions: 400/130/H380 mm -Weight: 13 kg.

Tailstock, counter bearing for dividing head, dividing head, lathe -Tailstock: center height 150 mm -Dimensions: see photos -Dimensions: 340/200/H260 mm -Weight: 20.4 kg