61352 results Spinning Machines With 1 Roll

similar results found in category presses

The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
Category: 106 presses
Updating date: 10.05.2018
approved
dealer
New in: used
Price 7.000 €
Location: Land-de DE D - Nordrhein-Westfalen
Seller: Vakuum und IndustrieService Meier GmbH

LEYBOLD pump level data to the pump status: RUTA - RUTA 1001 (20900895586) Pumpenystem (= 02209 Backing pump: LEYBOLD Sogevac SV300 Cat: 10931 Booster pump: Leybold Ruvac WAU1001 Cat: 11741 Condition: to see in Picture 3-6. The pump stand is completely clean newly painted and serviced in accordance with the manufacturer's specifications and tested and is 100% right, no oil leak Warranty: 3 months There are 2 x SV300 + WSU1001H available! There are 10 x SV300 + WAU1001 verguebar! Price refer ...

Category: 106 presses
Updating date: 10.05.2018
approved
dealer
New in: 1998
Location: Land-de DE D - Bayern
Seller: Rodenbach + Wolf GmbH & Co. KG

Sorting conveyor with 7 piece pneumatic drain valves. Band length: 15.000 mm band width: 600 mm. Ideal behind cross-cut saws. With solenoid valves on the ejector.; GOOD

Category: 106 presses
Updating date: 10.05.2018
approved
dealer
New in: used
Price 1.450 €
Location: Land-nl NL Europa - Niederlande
Seller: Rolleon BV

Screw conveyor used Number: 3 units Article number/part number 1851. Type used Length 300 cm Band width 260 mm Width 315 mm Incl Bahnbreit, electric motor 550 mm Bahnhoehe-input 240 mm Bahnhoehe-output 1400 mm Drive belt chain link Motor voltage 380 Volt Electric motor drive 0.25 kW. Rail profile steel More information screw diameter: 320 mm mortars: 260 mm more info 1 screw conveyor motor base 2 x screw conveyor engine above. Price per piece EUR 1450,- With friendly regards, Leon Slappendel ...

Category: 106 presses
Updating date: 10.05.2018
approved
dealer
New in: 1997
Location: Land-de DE D - Brandenburg
Seller: 3p Vertriebsgesellschaft mbH

3M-Matic(TM) Case Sealer 700r E is a random size case sealer that automatically adjusts for case height and width and is capable of sealing 19 boxes per minute, using tape widths from 36mm to 48mm wide.Seals case lengths of 6 inches and up, widths of 6 inch - 21.5 inch, heights 4.75 inch - 24.5 inch. Randomly adjusts to handle multiple box sizes. Top and bottom belt drive for positive box conveying. Rugged construction with 16-gauge welded steel frame and epoxy paint finish.; verry good

Category: 106 presses
Updating date: 02.07.2018
approved
dealer
New in: used
Price 1.500 €
Location: Land-de DE Wasserburg am Inn
Seller: MHS SYSTEMBAU Verpackungstechnik

We sell a used stacker of the A & F brand. The size and number of the upgrade are variable adjustable (maximum height is approx. 500 mm). Asking price â?¬1500 not overtaken. Obsolete â?¬3500.-

Category: 106 presses
Updating date: 14.11.2019
approved
dealer
New in: 2008
Location: Land-de DE 6
Seller: Mieth Maschinenhandel

Technical data: -max load capacity 3000 kg -maximum clamping diameter 3500 mm -Vertical stroke from 800-1800 mm - faceplate diameter 550 mm -Rotation Electr. infinitely variable - right - + links - course -E. - footswitch -Transmission of welding current approx. 350 A -Drive 400 V / 2,2 kW - space requirement approx. B H 1050 x 2450 X 1750 mm -Weight approx. 2200 kg

Category: 106 presses
Updating date: 27.08.2019
approved
dealer
New in: 2007
Location: Land-de DE 63322 Rödermark, Odenwaldstr. 63
Seller: Mieth Maschinenhandel

Mot. Containers,boiler rotary device Make: A & N PLANT Type: SAR 2400 Machine No: 1305 Built: 2007 Offer number: 15196 Technical data: - Total load 120000 Kg - Payload driven + running unit per 60000 kg - Container diameter approx. 450 - 5200 mm - self-centering articulated roller bucks - Roll diameter s.r. approx. 500 mm - Roller support surface of the double rollers 360 mm - Driven unit + running unit with rubberized rollers - Roller support surfaces without significant wear and ...

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

width of the strips: 50 mmband length: 940 mmband speed: 3 - 22 m/minturning speeds: 1450 U/mintube diameter: 16 - 114 mmradius: 180 °total power requirement: 4,75 kWweight of the machine ca.: 265 kg.range L-W-H: 1.000x750x1.300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

ampere: 120 A Stromquellecutting range for steel to: 0,3 - 30,0 mm Stcutting medium: 5 - 8 bar Druckluftcutting range: 3.000 x 1.500 mmrepeating accuracy: 0,2 mmconnected load: 400 V 50 Hztraversing speed: 0 - 20.000 mm/min.weight of the machine ca.: 550 kg.Overall size: 1.900 x 3.500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

pressure: 200 tstroke: 300 mmtable surface area: 1900x440 mmcolumn travel between the guideways: 1900 mmworking feed: 5,0 mm/secengine output: 15,0 kWweight of the machine ca.: 4.800 kg.range L-W-H: 2.570 x 1.665 x 2.860 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

pressure: 60 tstroke: 250 mmtable surface area: 1040 x 370 (315) mmcolumn travel between the guideways: 1040 mmajustment speed: 8,0 mm/secworking feed: 4,0 mm/secreturn speed: 10,0 mm/secengine output: 4,0 kWweight of the machine ca.: 800 kg.dimensions of the machine ca.: 1.700 x 700 x 2.100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

pressure: 80 tstroke: 250 mmtable surface area: 1040 x 260 mmcolumn travel between the guideways: 1040 mmajustment speed: 8,0 mm/secworking feed: 5,0 mm/secreturn speed: 10,0 mm/secengine output: 5,5 kWweight of the machine ca.: 835 kg.dimensions of the machine ca.: 1810 x 700 x 2100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

pressure: 100 tstroke: 300 mmtable surface area: 1070 x 260 mmcolumn travel between the guideways: 1070 mmajustment speed: 8,0 mm/secworking feed: 5,0 mm/secreturn speed: 10,0 mm/secengine output: 5,5 kWweight of the machine ca.: 1500 kg.dimensions of the machine ca.: 2050 x 1000 x 2200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

pressure: 150 tstroke: 300 mmtable surface area: 1070 x 290 mmcolumn travel between the guideways: 1070 mmajustment speed: 9,0 mm/secworking feed: 5,0 mm/secreturn speed: 10,0 mm/secengine output: 11,0 kWrange L-W-H: 2200 x 1300 x 2300 mmweight of the machine ca.: 1870 kg.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

pressure: 30 tstroke: 200 mmtable surface area: 775 x 190 mmcolumn travel between the guideways: 775 mmajustment speed: 7,5 mm/secworking feed: 5,0 mm/secreturn speed: 10,0 mm/secengine output: 3,0 kWweight of the machine ca.: 400 kg.dimensions of the machine ca.: 1.500 x 700 x 1.800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

pressure: 100 tstroke: 300 mmtable surface area: 1070 x 315 mmcolumn travel between the guideways: 1070 mmajustment speed: 8,0 mm/secworking feed: 5,0 mm/secreturn speed: 10,0 mm/secengine output: 5,5 kWweight of the machine ca.: 1.870 kg.dimensions of the machine ca.: 2.050 x 1.000 x 2.200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

pressure: 150 tstroke: 300 mmtable surface area: 1070 x 290 mmcolumn travel between the guideways: 1070 mmajustment speed: 9,0 mm/secworking feed: 5,0 mm/secreturn speed: 10,0 mm/secengine output: 11,0 kWweight of the machine ca.: 1870 kg.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

plate thickness: 6,5 mmthickness at Niro-steel: 3,0 mmblade length: 250 x 250 mmmotor: 400 Volt 50 Hznumber of strokes - idle run: 25 Hübe/mintable:: 800 x 750 mmengine output: 4,0 kWtable height: 970 mmrange L-W-H: 1010x850x1400 mmweight: 630 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

thread dia.: 12 M max.turning speeds: 400 U/minthread: M 3 - M 12 Mworking area: 1600 R max.working range: 500 Rmin.weight: 16 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

thread dia.: 20 Mturning speeds: 400 U/minthread: M 4 - M 20 Mworking area: 1900 Rmax.working range: 200 Rmin.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

plate thickness: 1,2 mmthroat: 140 mmdistance between roll centers: 62,0 mmtotal power requirement: manuell kWweight of the machine ca.: 50 kgdimensions of the machine ca.: 560 x 220 x 500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

sheet width: 1350 mmplate thickness: 3,0 mmthickness at Niro-steel: 2,0 mmno. of strokes: 35 Hub/mincutting angle: 2°30 °engine output: 3,0 kWtable height: 810 mmweight of the machine ca.: 1.260 kg.range L-W-H: 1930 x 1960 x 1200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: 2017
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

plate thickness: 2,0 mmtube diameter: 60,0 mmmotor: 400 Volttotal power requirement: 2,2 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

: 3000 mmWorking width: 360 mmroll diameter: 60,0 mmweight max. in kg: 900 kgheight adjustment: 620 - 1055 mmweight: 66 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

: 3000 mmWorking width: 360 mmroll diameter: 60,0 mmweight max. in kg: 900 kgheight adjustment: 620 - 1055 mmweight: 107 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

roll diameter: 51 mmWheel width: 350 mmweight: 20 kgheight adjustment: 575 - 975 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

roll diameter: 51 mmWheel width: 125 mmweight: 20 kgheight adjustment: 560-975 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 14.06.2019
approved
dealer
New in: 2010
PriceVS request quote
Location: Land-de DE 19258 Neu Gülze, Buernenn 57
Seller: WPS Molkereimaschinen

Vollautomatischer Traypacker für Milchkartons Type: TFH, Make: A&F year: 2010. Modell: 503/505-262543-W1. Maschinen Nr. 31920101. Leistung: 14.400 EH/h. Betriebsstunden: approx. 50.000h

Category: 106 presses
Updating date: 12.09.2019
approved
dealer
New in: used
Price 18.000 €
Location: Land-lt LT LT-37 Panevezys, K. Naruseviciaus st.
Seller: Baltgina, UAB

2 trolleys 1000x1000x2000 mm; overall dimensions 1500x2600x3500 mm; power supply 400 V; total power 60 kW; heating power 54 kW; motors 2x2,2 kW; new computer; external smoke generator.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: 2007
Location: Land-de DE Grevenbroich Halle C
Seller: WALTER KAMES GMBH

weight max.: 60 tworkpiece diameter: 568 - 6815 mmroll diameter: 520 x 355 mmspeed: 100 - 11716 mm/minTorque: 1532 Nmtotal power requirement: 3 kWweight of the machine ca.: 3,4 tdimensions of the machine ca.: 3,7 x 1,2 x 0,9 m- very good condition- set of driven and passive roller steadyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 06.10.2019
approved
dealer
New in: 2006
Location: Land-nl NL Lemmer
Seller: Valk Machines B.V.

Tank turning A & N Workpiece weight: 60,000 kg Workpiece diameter: 600 min. 6,500 max. Roll diameter: 521 mm Roll width: 356 mm Rotation speed: 130-1.670 mm / min. Equipped with:-hand-held remote control -Left/right Machine weight: 3,200 kg Machine Lxwxh: mm

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

weight max. in kg: 3000 kgtable length: 1300 mmtable width: 800 mmstroke height: 235 - 1030 mmstroke: 795 mmstroke of worktool slide: 38 sekvoltage: 400 VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

sheet width: 1550 mmplate thickness: 6,5 mmpre-bending: 4,5 mmdiameter of upper rolls: 150 mmside roll diameter: 130 mmdiameter of lower rolls: 150 mmrange L-W-H: 3.300 x 1.200 x 1.300 mmtotal power requirement: 2,2 + 1,5 kWweight of the machine ca.: 2.370 kg.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: 2019
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

weight of the machine ca.: ca. 10,0 kgdimensions of the machine ca.: 700 x 800 x 1200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

weight max.: 1000 kgtable turning speeds: 180 - 1800 mm/min.roll diameter: 200 x 50 mmworkpiece diameter: 50 - 1500 mmweight: 100 kgrange L-W-H: 935 x 344 mm Antriebrange L-W-H: 2450x500 mm Mitläufervolt: 230 V / 50 HzThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

weight max.: 5000 kgtable turning speeds: 150 - 800 mm/min.roll diameter: 310 x 120 mmworkpiece diameter: 200 - 2.500 mmweight: 300 kgrange L-W-H: 0 mm Antriebrange L-W-H: 0 mm Mitläufervolt: 0 V / 50 HzThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

plate thickness: 2,5 mmthroat: 160 mmdistance between roll centers: 96 mmrevolutions per minute: 64 U/minengine output: 1,5 kWweight: 350 kgrange L-W-H: 1,4 x 0,55 x 1,12 mmAusstattung:- 4 Satz Walzen- motorisch angetriebene Sickenmaschine- Fuáschalter- Bedienungsanleitung auf Deutsch- CE-Zeichen / KonformitätserklärungThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

width of the strips: 100 mmband length: 920 mmband speed: 7 m/secloading area: 300 x 150 mmmotor: 0,44 KWmotor: 220 Voltrange L-W-H: 470 x 370 x 210 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

width of the strips: 100 mmband length: 920 mmband speed: 7 m/secloading area: 300 x 150 mmmotor: 0,44 KWmotor: 400 Voltrange L-W-H: 470 x 370 x 210 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

width of the strips: 200 mmband length: 1490 mmband speed: 8 m/secmotor: 400 Voltloading area: 500 x 280 mmDimensions (HxWxD): 750 x 600 x 340 mmtotal power requirement: 1,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

width of the strips: 300 mmband length: 2070 mmband speed: 7 m/secengine output: 1,5 kWsurface of working table: 750 x 380 mmdiameter: 87,7 Führungsrollen mmtotal power requirement: 400 Voltweight of the machine ca.: 88 kg.Dimensions (HxWxD): 1050 x 600 x 400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

width of the strips: 45 mmband length: 850 mmtotal power requirement: 230 Volttotal power requirement: 0,18 kWband speed: 8,0 m/sek.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: 2017
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

sheet width: 2050 mmplate thickness: 3,0 mmpre-bending: 2,0 mmroll length: 2050 mmmin. dia.: 195 mmroll diam. toproll: 130 mmengine output: 2,2 + 1,1 kWweight: 1.600 kgrange L-W-H: 3750 x 650 x 1020 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

width of the strips: 100 mmband length: 2000 mmband speed: 30 m/sectube diameter: 20 - 76 mmangle adjustable from - to: 30 - 90 GradDust suction hood: 70 mmmotor speeds:: 2850 Upm.total power requirement: 2,2 kWweight of the machine ca.: 130 kg.range L-W-H: 1350 x 700 x 1200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

Compartment width: 800 mm0: 1200 mmroll diameter: 150 mmPayload: ca. 1500 kgweight of the machine ca.: 66 kg.range L-W-H: 1.235 x 830 x 625 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

sheet width: 1270 mmplate thickness: 2,5 mmroll length: 1270 mmroll diam. toproll: 90,0 mmengine output: 1,1 kWbending speed: 6,0 m/minweight: 520 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

sheet width: 1270 mmplate thickness: 2,5 mmroll length: 1270 mmroll diam. toproll: 86,0 mmengine output: manuell kWweight: 425 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

length: 1.104 mmwidth: 696 mmheight: 1.037 mmweight: 240 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

weight max.: 1200 kg.table turning speeds: 80 - 1600 mm/min.roll diameter: 200 x 50 mmworkpiece diameter: 20 - 800 mmrange L-W-H: 520 x 470 x 390 mm Antriebrange L-W-H: dito mm Mitläufervolt: 230 V / 50 Hzweight: 56 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Updating date: 19.11.2019
approved
dealer
New in: new
Location: Land-de DE Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

Number of drawer: 9 Stückweight: ca. 80 kg.weight: Gesamt ca. 500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)