56090 results Spinning And Flow Forming Machines With 3 Rollers And More

similar results found in category presses

The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
Category: presses
Updating date: 10.05.2018 item-No.: 124081486
approved
dealer
New in: used
Seller: country1-de Vakuum und IndustrieService Meier GmbH
Location: D - Nordrhein-Westfalen
Price: 7.000 €

LEYBOLD pump level data to the pump status: RUTA - RUTA 1001 (20900895586) Pumpenystem (= 02209 Backing pump: LEYBOLD Sogevac SV300 Cat: 10931 Booster pump: Leybold Ruvac WAU1001 Cat: 11741 Condition: to see in Picture 3-6. The pump stand is completely clean newly painted and serviced in accordance with the manufacturer's specifications and tested and is 100% right, no oil leak Warranty: 3 months There are 2 x SV300 + WSU1001H available! There are 10 x SV300 + WAU1001 verguebar! Price refers to 1 PCs.; ready for operation

Category: presses
Updating date: 10.05.2018 item-No.: 113870941
approved
dealer
New in: used
Seller: country1-de Vakuum und IndustrieService Meier GmbH
Location: D - Nordrhein-Westfalen
Price: 7.000 €

Category: presses
Updating date: 04.02.2020 item-No.: 125667788
approved
dealer
New in: new
Seller: country1-de F1-TRADE GmbH

Category: presses
Updating date: 17.07.2018 item-No.: 93690293
approved
dealer
New in: used
Seller: country1-at Theo Stefan OG

throw: 250 mm; outreach: 200 mm;; very good

Category: presses
Updating date: 04.02.2020 item-No.: 125677693
approved
dealer
New in: used
Seller: country1-de F1-TRADE GmbH

Category: presses
Updating date: 10.05.2018 item-No.: 124964936
approved
dealer
New in: used
Seller: country1-nl Rolleon BV
Location: Europa - Niederlande
Price: 1.250 €

Category: presses
Updating date: 10.05.2018 item-No.: 123548792
approved
dealer
New in: used
Seller: country1-nl Rolleon BV
Location: Europa - Niederlande
Price: 1.450 €

Category: presses
Updating date: 10.05.2018 item-No.: 124168218
approved
dealer
New in: used
Seller: country1-nl Rolleon BV
Location: Europa - Niederlande
Price: 1.450 €

Screw conveyor used Number: 3 units Article number/part number 1851. Type used Length 300 cm Band width 260 mm Width 315 mm Incl Bahnbreit, electric motor 550 mm Bahnhoehe-input 240 mm Bahnhoehe-output 1400 mm Drive belt chain link Motor voltage 380 Volt Electric motor drive 0.25 kW. Rail profile steel More information screw diameter: 320 mm mortars: 260 mm more info 1 screw conveyor motor base 2 x screw conveyor engine above. Price per piece EUR 1450,- With friendly regards, Leon Slappendel Rolleon BV Westzijdeweg 37 2391 per Hazerswoude-dorp; ready for operation

Category: presses
Updating date: 10.05.2018 item-No.: 123538029
approved
dealer
New in: 1997
used
Seller: country1-de 3p Vertriebsgesellschaft mbH
Location: D - Brandenburg

3M-Matic(TM) Case Sealer 700r E is a random size case sealer that automatically adjusts for case height and width and is capable of sealing 19 boxes per minute, using tape widths from 36mm to 48mm wide.Seals case lengths of 6 inches and up, widths of 6 inch - 21.5 inch, heights 4.75 inch - 24.5 inch. Randomly adjusts to handle multiple box sizes. Top and bottom belt drive for positive box conveying. Rugged construction with 16-gauge welded steel frame and epoxy paint finish.; verry good

Category: presses
Updating date: 14.03.2019 item-No.: 123538028
approved
dealer
New in: 1997
used
Seller: country1-de 3p Vertriebsgesellschaft mbH
Location: D - Brandenburg

Category: presses
Updating date: 10.05.2018 item-No.: 123548893
approved
dealer
New in: used
Seller: country1-nl Rolleon BV
Location: Europa - Niederlande
Price: 825 €

Category: presses
Updating date: 10.05.2018 item-No.: 123548951
approved
dealer
New in: used
Seller: country1-nl Rolleon BV
Location: Europa - Niederlande
Price: 1.450 €

Category: presses
Updating date: 10.05.2018 item-No.: 123548957
approved
dealer
New in: used
Seller: country1-nl Rolleon BV
Location: Europa - Niederlande
Price: 1.000 €

Category: presses
Updating date: 10.05.2018 item-No.: 123548973
approved
dealer
New in: used
Seller: country1-nl Rolleon BV
Location: Europa - Niederlande
Price: 1.200 €

Category: presses
Updating date: 10.05.2018 item-No.: 123549001
approved
dealer
New in: used
Seller: country1-nl Rolleon BV
Location: Europa - Niederlande
Price: 1.250 €

Category: presses
Updating date: 04.11.2019 item-No.: 126057566
approved
dealer
New in: 2001
used
Seller: country1-de MHS SYSTEMBAU Verpackungstechnik
Location: Wasserburg am Inn

We sell a used stacker of the A & F brand. The size and number of the upgrade are variable adjustable (maximum height is approx. 500 mm). Asking price â?¬1500 not overtaken. Obsolete â?¬3500.-

Category: presses
Updating date: 27.08.2019 item-No.: 139826229
approved
dealer
New in: 2007
used
Seller: country1-de Mieth Maschinenhandel
Location: 63322 Rödermark, Odenwaldstr. 63

Mot. Containers,boiler rotary device Make: A & N PLANT Type: SAR 2400 Machine No: 1305 Built: 2007 Offer number: 15196 Technical data: - Total load 120000 Kg - Payload driven + running unit per 60000 kg - Container diameter approx. 450 - 5200 mm - self-centering articulated roller bucks - Roll diameter s.r. approx. 500 mm - Roller support surface of the double rollers 360 mm - Driven unit + running unit with rubberized rollers - Roller support surfaces without significant wear and tear - infinitely adjustable rotational speed 75 - 1500 mm/min - Remote controller for re- and Li. running - Drive 400 V - Space requirements Unit approx. W 3600 x H 1500 x D 1600 mm - Platzb. with running unit approx. W 2600 x H 1500 x D 1300 mm - Weight attached to tr. Unit approx. 7300 kg - Weight with running unit approx. 4500 kg

Category: presses
Updating date: 27.02.2020 item-No.: 145088907
approved
dealer
New in: new
Seller: country1-de A+B Werkzeug Maschinen Handels GmbH
Location: Ahaus

width of the strips: 50 mmband length: 940 mmband speed: 3 - 22 m/minturning speeds: 1450 U/mintube diameter: 16 - 114 mmradius: 180 °total power requirement: 4,75 kWweight of the machine ca.: 265 kg.range L-W-H: 1.000x750x1.300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: presses
Updating date: 06.02.2020 item-No.: 137907474
approved
dealer
New in: 1967
used
Seller: country1-de ZOMA Maschinenhandel

ydraulic stand press, used hydraulic gap type press , used Type: PYE 100 Built / new in: 1967 Manufacturer / make: WEMA Pressing force / rated pressure: 100 t Table size / table size: 710 x 500 mm Table hole/ hole in table: 200 mm Impact running surface / slide surface: 355 x 355 mm Extension / depth of gap: 355 mm Mounting height / height of table: 630 mm Max piston stroke / max. piston stroke: max. 500 mm Pressure piston diameter / diam. of piston: 210 mm Pushing speed downwards/upwards Downward/ upward speed of slide: 43 mm/sec// 112 mm/sec Weight: 3.6 t Connection value / connected load: 8 kW

Category: presses
Updating date: 26.02.2020 item-No.: 123486572
approved
dealer
New in: used
Seller: country1-de Komplett-Konzept Verwertungs GmbH
Location: D - Nordrhein-Westfalen
Price: 1.000 €

Category: presses
Updating date: 26.02.2020 item-No.: 123486571
approved
dealer
New in: used
Seller: country1-de Komplett-Konzept Verwertungs GmbH
Location: D - Nordrhein-Westfalen
Price: 840 €

Category: presses
Updating date: 15.01.2020 item-No.: 140620722
approved
dealer
New in: used
Seller: country1-lt Baltgina, UAB
Location: LT-37 Panevezys, K. Naruseviciaus st. 10
Price: 18.000 €

2 trolleys 1000x1000x2000 mm; overall dimensions 1500x2600x3500 mm; power supply 400 V; total power 60 kW; heating power 54 kW; motors 2x2,2 kW; new computer; external smoke generator.

Category: presses
Updating date: 21.02.2020 item-No.: 143634474
approved
dealer
New in: used
Seller: country1-de LIEBL industry partners
Price: 25 €

Category: presses
Updating date: 27.02.2020 item-No.: 145088587
approved
dealer
New in: new
Seller: country1-de A+B Werkzeug Maschinen Handels GmbH
Location: Ahaus

width of the strips: 100 mmband length: 920 mmband speed: 7 m/secloading area: 300 x 150 mmmotor: 0,44 KWmotor: 220 Voltrange L-W-H: 470 x 370 x 210 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: presses
Updating date: 27.02.2020 item-No.: 145088764
approved
dealer
New in: new
Seller: country1-de A+B Werkzeug Maschinen Handels GmbH
Location: Ahaus

width of the strips: 100 mmband length: 920 mmband speed: 7 m/secloading area: 300 x 150 mmmotor: 0,44 KWmotor: 400 Voltrange L-W-H: 470 x 370 x 210 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: presses
Updating date: 27.02.2020 item-No.: 145088765
approved
dealer
New in: new
Seller: country1-de A+B Werkzeug Maschinen Handels GmbH
Location: Ahaus

width of the strips: 200 mmband length: 1490 mmband speed: 8 m/secmotor: 400 Voltloading area: 500 x 280 mmDimensions (HxWxD): 750 x 600 x 340 mmtotal power requirement: 1,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: presses
Updating date: 27.02.2020 item-No.: 145088763
approved
dealer
New in: new
Seller: country1-de A+B Werkzeug Maschinen Handels GmbH
Location: Ahaus

width of the strips: 300 mmband length: 2070 mmband speed: 7 m/secengine output: 1,5 kWsurface of working table: 750 x 380 mmdiameter: 87,7 Führungsrollen mmtotal power requirement: 400 Voltweight of the machine ca.: 88 kg.Dimensions (HxWxD): 1050 x 600 x 400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: presses
Updating date: 27.02.2020 item-No.: 145088759
approved
dealer
New in: new
Seller: country1-de A+B Werkzeug Maschinen Handels GmbH
Location: Ahaus

width of the strips: 45 mmband length: 850 mmtotal power requirement: 230 Volttotal power requirement: 0,18 kWband speed: 8,0 m/sek.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: presses
Updating date: 27.02.2020 item-No.: 145088705
approved
dealer
New in: new
Seller: country1-de A+B Werkzeug Maschinen Handels GmbH
Location: Ahaus

width of the strips: 100 mmband length: 2000 mmband speed: 30 m/sectube diameter: 20 - 76 mmangle adjustable from - to: 30 - 90 GradDust suction hood: 70 mmmotor speeds:: 2850 Upm.total power requirement: 2,2 kWweight of the machine ca.: 130 kg.range L-W-H: 1350 x 700 x 1200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: presses
Updating date: 27.02.2020 item-No.: 145088846
approved
dealer
New in: new
Seller: country1-de A+B Werkzeug Maschinen Handels GmbH
Location: Ahaus

Number of drawer: 7 Stückweight: ca. 80 kg.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: presses
Updating date: 23.04.2017 item-No.: 90405643
approved
dealer
New in: used
Seller: country1-de AVC GmbH
Location: Sonsbeck

A+F conveyor line infrastructure, consistent of: - for plate band and multiflex chain - ca 75 m straight line with different segments from 1,5 - 2 m - 11 curves 45° - 5 rotary plate curves 90° - 6 chain/band driving units of diffenerent types - 2 labellers with field distributor - 4 field distributor (1 with field bs interface) - plate band & multiflex chain in the needed amount shipping: free load from stock - shipping worldwide - pickup

Category: presses
Updating date: 28.01.2020 item-No.: 132261793
approved
dealer
New in: 1977
used
Seller: country1-de ZOMA Maschinenhandel

Hydraulic horizontal alignment u bending press, electric reconditioned hydraulic multipurpose press, used, overhauled electrically Type / type: PYXWM 400 Manufacturer / make: WMW Year / year: 1977 / outdated / overhauled in 11 / 2018 Maximum pressing force / max. pressure: 400 t Piston stroke / stroke of plunger: 800 mm Height of the pressure piece shots / height of locators: 740 mm Press pieces distance of the cross traverse / locators clearance at counter cross beam: 1390... 350 mm Installation size betw. Print pieces piston Gregentraverse / width of installation b/n locators of plunger and counter cross beam: 700 mm Maximum installation distance / max width of installation: 2340 mm Depth of the counter beam / depth of counter cross beam: 820 mm Frame height / height of frame: 1000 mm Border width / width of frame: 930 mm Power consumption / connected  ...

Category: presses
Updating date: 18.04.2019 item-No.: 132332566
approved
dealer
New in: used
Seller: country1-de Dipl.-Ing. O. Saad
Location: 13469 Berlin, Jean-Jaurès-Str. 21
Price: VB 1.500 €

Teigausrollmaschien A. Fritsch kg model: 3WK630 roll fix. Band width 610 mm. SER. No.: 3WK630117717867 Dimensions: 1800x1100x1150mm Elek. Voltage: 380V Condition: works. PS: on our homepage, you will find other various gastro devices in range. greeting

Category: presses
Updating date: 02.05.2019 item-No.: 134380016
approved
dealer
New in: 1978
used
Seller: country1-dk Stratek ApS
Location: 8660 Skanderborg, Bragesvej 11

Industrial 2 layer pellet cooler L: 6.555mm W: 2,040 mm H: 2.190mm + 320mm gear The pellets are colled on the forward and reverse chain. Pellets are fed- and discharge in the same end of the machine. Ventilaotr 18,5kW, rotary inlet valve

Category: presses
Updating date: 17.12.2019 item-No.: 126532705
approved
dealer
New in: 1992
used
Seller: country1-de Kandlin Stromerzeuger-Ankauf GmbH
Location: Bergisch Gladbach
Price: 40.000 €

10.500 volts A.C generator was driven by a Solar centaur 50 gas turbine in good running condition with 5000 KVA from 1992 for sale. A.C alternator is stored in our warehouse Bergisch Gladbach. generator end: A.C Generators typ: LSA 56.L84P voltage: 10.500 powwerrating: 5000 KVA rpm: 1500 r/min manufactured: 1992 weight: 13.6 tons price: 40.000€ FCA Price: 40.000€ FCA free loaded in our warehouse D-Bergisch Gladbach. Stromerzeuger-Discount.com Kürtener Straße 13 D-51465 Bergisch Gladbach Mobile: 00491635263546 Telefon: 0049 2202 2492256 Fax: 0049 2202 2492257 Email: info@stromerzeuger-discount.de

Category: presses
Updating date: 06.11.2018 item-No.: 124002042
approved
dealer
New in: used
Seller: country1-it IMALL
Location: MARIANO COMENSE

MULTIMOULDER machine 6 shafts type A.COSTA EURO 23 second hand machine . it worked very little protection cab CE mark : YES 2 axes by CNC : MOULDER ( left ) - THICKNESS PLANER grooved plane max. useful working width mm. 230 min. useful working width mm. 15 max. useful working height mm. 120 min. useful working height mm. 10 incoming plane mm. 2400 engine power advancement: Hp 2 variable feed speed mt / min. 5/27 diameter of rollers advancement mm. 140 engine power lifting Hp 0.5 rotation speed shafts rpm. 6000 shaft diameter mm. 40 useful length horizontal shafts mm. 252 useful length vertical shafts mm. 150 useful length universal shaft mm. 240 machine composition: 1st shaft: surface planer (motor power Hp 7,5) 2nd shaft: right moulder (motor power Hp 7,5 ) 3rd shaft: left moulder (engine power Hp 10) 4th shaft: thickness planer (motor power Hp 10) 5th shaf ...

Category: presses
Updating date: 27.02.2020 item-No.: 145264817
New in: used
Seller: country1-gb Industrial Auctions BV
Location: Units 1-6, Mountain Farm Marsh Road, Ham
Price: used machinery auction RESALE 300 €

A.E.W. Engineering Co, ltd. bandsaw, type: MK 9, model: 400M, serial number: LHS58882, 415 V, 3 Ph, 5.1 A, dimensions: 1200 mm x 1000 mm x 1900 mm.

Category: presses
Updating date: 27.02.2020 item-No.: 145257391
approved
dealer
New in: used
Seller: country1-de Surplex GmbH
Location: Italien, 23862 Civate
Price: used machinery auction RESALE 100 €

Weight approx.: 100 kgDimensions (l x w x h) approx.: 1500 x 550 x 1300 mmDescription: Capacity 1000 kg, fork length 1150 mm, lifting height 800 mm

Category: presses
Updating date: 12.02.2020 item-No.: 128476625
approved
dealer
New in: 1990
used
Seller: country1-de KRAMON
Location: 90518 Altdorf

A.v.K. generator Germany 800 kVA. 1500 rpm. good condition

Category: presses
Updating date: 10.05.2018 item-No.: 124965039
approved
dealer
New in: 2001
used
Seller: country1-de Driftmeier Vermögensverwaltungs GmbH
Location: D - Nordrhein-Westfalen

technically and visually very good machine. Is power and can be tested at any time in the normal.; ready for immediate use

Category: presses
Updating date: 11.11.2019 item-No.: 125413048
approved
dealer
New in: 2005
used
Seller: country1-de THAL BAUSATZHALLEN
Location: Hessen

GRAB A BARGAIN STORAGE SHED This pre engineered, pre fabricated Warehouse Steel building Kit, covering approx. 280 square meters, measuring approx. 28 m (length) x 10 m (width) x 5.3 m (eaves) x 5.7 m (APEX) is due to be deconstructed end of 2019. The structural framework consists of hot rolled European standard sections. According to the structural design calculations, the steel Hall was planned/ built in 2005. This well maintained shed has so far been used for storage purposes and is in excellent condition. Possible use: out building, craftsmen workshop, artist Studio and much more. DIMENSIONS according to the drawing: Foot print: approx. 282, 60 sq meters. Hall length: 28.07 m outside wall cladding; Bay width: about 5.60 m c2c uprights. Width of the Hall: 10.07 m outside wall cladding; Eave height: approx. 5.31 meters; Ridge hightl: approx. 5.75 meters; Roof pitch ...

Category: presses
Updating date: 25.07.2019 item-No.: 134368948
approved
dealer
New in: used
Seller: country1-de THAL BAUSATZHALLEN
Location: BERLIN

Here below you’ll find the description of clear span steel storage shed with a gross floor area of about 280 square meters, which is to be dismantled soon. According to production documents, the steel hall was planned/ built in 2005 and has since been used for storage purposes. Possible future use: craftsmen workshop, warehouse and much more. DIMENSIONS according to the survey drawing: Floor area: 282.60 sqm. Hall length: 28.07 m outside wall cladding; Bay width: 5.60 m longitudinal grid / column grid. Hall width: 10.07 m outside wall cladding; Eave height: 5.31 meters. First level: 5.75 meters; Roof pitch: 5 degrees; Snow load: 0,75 kN/sqm / 75 kg/m2; STRUCTURAL STEEL WORK: The primary frame work is made of European standard hot rolled steel profiles of steel grade S235. Frame trusses IPE 270, columns IPE 300, corner posts HE-A 140, interme ...

Category: presses
Updating date: 22.02.2020 item-No.: 141731055
approved
dealer
New in: 1997
used
Seller: country1-de THAL BAUSATZHALLEN

Prefabricated Office Building, which is due to be dismantled immediately. Possible use: in its second life cycle this structure could serve as a Factory Building, Warehouse, Exhibition/ Sales Hall and many others. STRUCTURAL STEEL WORK: this over engineered steel frame construction consists of 11 self-supporting main frames made of European Standard I-Sections Profiles with wide flange columns HEB 500, wide flange Trusses HEA 450 and 2 end wall-frames with pendulum posts. The mezzanine floors are supported by wide flansch profiles HEB 500. The longitudinal stiffness of the Hall consists of diagonal bracings. The roof substructure consists of trapezoidal sheet steel. APPROXIMATE DIMENSIONS: Large floor area: approx. 795.00 m2; Hall Width: 16.13 m outside wall cladding; System width: 15.16 m c2c of uprights; Hall Length: 49.33 outside wall cladding; Bay Width: 4.00 c2c  ...

Category: presses
Updating date: 22.02.2020 item-No.: 142353023
approved
dealer
New in: 2001
used
Seller: country1-de THAL BAUSATZHALLEN

Second hand steel framed workshop hall with a covered surface area of approx. 306 sqm, which is to be dismantled soon. According to construction documents, this steel building was planned and built in 1998 - 2001. The steel hall, which was previously used as a locksmith workshop/ automotive workshop/ warehouse, is in good condition. In its second life cycle, this hall construction could be used for the construction of a equipment/machine storage hall, craftsmen workshop hall, weather protection hall and many more. STRUCTURAL STEEL WORK: Saddle roof 2-joint frame construction made of hot rolled and galvanised steel profiles. Frame trusses IPE 240, uprights IPE 270 / HEA 240, corner posts HE-A 140, gable posts HE-A 120, gable beams HE-A 120, of the steel grade St 37-2 galvanized. Secondary construction of galvanised C-profile wall bars and Z-profile purlins Z 250-2.5. The stabilizati ...

Category: presses
Updating date: 25.07.2019 item-No.: 129674561
approved
dealer
New in: 2002
used
Seller: country1-de THAL BAUSATZHALLEN
Location: BERLIN

Dismantled entrance tower of a defunct "Praktiker" retail facility. POSSIBLE FUTURE USE: as exhibition hall, building entrance, office building, winter garden and much more. APPROXIMATE DIMENSIONS: Floor surface: approx. 152 square meters, the footprint of the entrance tower has the shape of an irregular Pentagon. Tower length: approx. 12.30 meters clear internal length. Tower width: approx. 12.30 meters clear inner width. Tower height: approx. 16.45 meters total height from terrain. Height: approx. 13,45 meters roof level from terrain. Height: approx. 12,50 meters clear height measured from the floor. LIVE LOAD ASSUMTION: regular snow load according to snow load zone II (elevation 400 m) s = 0,75 kN/sqm. STRUCTURAL STEEL WORK: the load-bearing structure of the tower is composed of a primed, coated, bolted steel frame construction made of hot- ...

Category: presses
Updating date: 29.07.2016 item-No.: 138425669
approved
dealer
New in: 1997
used
Seller: country1-de THAL BAUSATZHALLEN
Location: BERLIN

Former Printing Factory, with interior dimensions of approx. 47.7 x 36.3 meters and a usable area of round about 1.730 square metres, up for immediate deconstruction. In its second life cycle, this Hall could serve to establish a factory, workshop, warehouse, etc.. STRUCTURAl STEEL WORK: the roof structure consists of hot-rolled and primed / coated steel frames based on supports made of reinforced concrete. The longitudinal stiffness of the Hall we by wind bracings in the roof level and vertical bracings in the side walls. The roof substructure consists from trapezoidal load bearing steel panels. APPROXIMATE DIMENSIONS: Width of the Hall: approx. 36.30 meters inner wall; Hall length: approx. 47.70 meters inner wall; Clear height: 5.05 meters to the lowest steel beams; Eave height: 4.50 m / 5.25 meters; Building height: approx. 9.00 meters at the roof top; ROOF CLADDI ...

Category: presses
Updating date: 31.12.2019 item-No.: 144325363
approved
dealer
New in: 2002
used
Seller: country1-de THAL BAUSATZHALLEN
Location: BERLIN

Scond hand steel shed (54x12x5/5.8m) located near the City of Hamburg, that's due to be deconstructed in February/ March 2020. DESCRIPTION OF THE PREFAB STEEL HALL This pre-engineered and pre-fabricated single slope steel building, designed and built in 2002 to serve as a quality-control inspection depot for pallets (and other packaging/ shipping crates), is soon to be disassembled/ dismantled for later re-erection elsewhere. POSSIBLE FUTURE USES: in its next life cycle, this hot dip galvanized "steel building kit" could be used for the construction of a new agricultural/ industrial storage shed, craftsmen/ automotive workshop and many more. DIMENSIONS according to blue prints / drawings: Built area: approx.662.67 square meters; Hall length: approx. 54.14 m outside wall cladding; Bay width: approx. 6.00 m frame spacing/ column grid; Hall width: approx. 12.24 m out ...

Category: presses
Updating date: 22.02.2020 item-No.: 144892829
approved
dealer
New in: 2008
used
Seller: country1-de THAL BAUSATZHALLEN

This body shop was built in 2008, is now due to be carefully dismantled. In its second life cycle, this 20 metre clear span steel construction hall could be used for the construction of an assembly/production hall, workshop hall and much more. APPROX. DIMENSIONS: Hall length: 65.63 m outer wall cladding; Longitudinal grid: 4.8 + 5.4 + 4.8 + 7.5+7.5.7.5+7.5+7.5+7.5 + 5.0 m; Hall width: 20.44 m outer wall cladding; Width grid: 4,315 + 5.00 + 5.00 + 4,315 m; Eaves height: approx. 6.00 m to the top of roof panel; Building height: approx. 7.00 m ridge height; Snow load: 0.75 kN/sqm; Wind load: 0.50 kN/sqm; STEEL WORK: the primary structure consists of primed/coated hot-rolled steel profiles. In the axes 2-13 are 9 pieces of clear span frames and in axis 1 like axis 14 are light end wall frames with intermediate supports which are mounted on to point/strip foundations.  ...

Category: presses
Updating date: 27.06.2016 item-No.: 137203151
approved
dealer
New in: 1995
used
Seller: country1-de THAL BAUSATZHALLEN
Location: BERLIN

Prefab car dealership building consisting of the truck and car workshop, the parts warehouse and the exhibition hall, with a covered BGF of a total of 913.10 sqm, up for deconstruction. In its second life cycle, this structure could be used for the construction of a commercial hall, sales hall, vintage workshop hall and many more. The building is divided into two components, the single-storey exhibition hall (part A), the two-storey hall (truck and car workshop, mechanical department, parts warehouse, social rooms, oil storage, etc. as component B. EXHIBITION HALL in L- form (part A): Hall width: 20.55 m outside wall cladding; Hall length: 19.00 m outside wall cladding; Bay width: 4.00 m; Attica height: 4.00 m; Eaves height: 3.70 m top of roofing; Window height: 3.00 m top of window frame; LOAD ASSUMPTIONS for Part A Exhibition: a.) Roof Trapezoidal sheet 0.15 ...

Category: presses
Updating date: 30.12.2019 item-No.: 144307865
approved
dealer
New in: 1984
used
Seller: country1-de THAL BAUSATZHALLEN
Location: BERLIN

Second hand steel framed building 25.5x15.6x5/5.8m located in Harburg an der Suederelbe, City of Hamburg, Germany. DESCRIPTION OF THE PREFAB STEEL HALL This pre-engineered and pre-fabricated clear span steel building, designed 1982 and built/completed in 1984 to serve as a quality-control inspection depot for pallets (and other packaging/ shipping crates), is soon to be disassembled/ dismantled for later re-erection elsewhere. POSSIBLE FUTURE USES: in its next life cycle, this "steel building kit" could be used for the construction of a new craftsmen workshop-/ storage- facility and many more. DIMENSIONS according to blue prints / drawings: Built area: approx.397.22 square meters; Hall length: approx. 25.43 m outside wall cladding; Bay width: approx. 5.00 m frame spacing/ column grid; Hall width: approx. 15.62 m outside wall cladding; Eaves hight: approx. 5.10  ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)